Problem in the RuntimeWorkBench, Adapter Engine

Hi Experts,
In the RWB> Component Monitoring>Adapter Engine if i double click on this, it is showing the following error:
CCMS Status: Last Retry Jan 14, 2009 10.42.32 AM CET
Ping Status: HTTP request failed Error Code: "401" Error message "Unauthorized[http://<hostName:Port Number/AdapterFramework/rtc]"
Last Retry Jan 14, 2009 10.43.57 AM CET
Self-Test Status: HTTP request failed Error Code: "401" Error message "Unauthorized[http://<hostName:Port Number/AdapterFramework/rtc]"
Last Retry Jan 14, 2009 10.44.17 AM CET
Ping Status & Self-Test Status trafic light colur is RED.
and also iam not able to open Message Monitoring it is asking 3 times user id and password finally it is displaying Unauthorized error.
It is production system, can any body help on this issue
Regards
Rohit

Hi Rohit
for not able to open Message Monitoring
Check if you have Runtime workbench access. You will require to have SAP_XI_MONITOR role authorization with your user id.
also Check if the XI users (in ABAP) on the system running the SLD are locked. If some are, unlock them.
There is a Monitoring Guide avaiable which will be very useful for you. Please check the User Profile settings described in it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
There is also a post:
Adapters not working, SLDAccess msg in adapter monitor
take help of this post also
Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
for HTTP request failed Error Code: "401"
check if user: XIRWBUSER is not locked in R/3
also check if you got a correct password in the XI exchange profile :
com.sap.aii.rwb.serviceuser.name
com.sap.aii.rwb.serviceuser.pwd
com.sap.aii.rwb.serviceuser.language
also try Changed pw in AE and connection is should work
Regards
Abhishek
Edited by: Abhishek Agrahari on Jan 15, 2009 5:55 AM

Similar Messages

  • "Performance" problems with the File adapter on Plain J2SE Adapter Engine

    Hi,
    At the moment I'm on a customer side to solve some XI issues for a few days. One of the issues is the performance of the Plain J2SE Adapter Engine, using the file adapter to transfer XML messages(already XI message format) from the legacy system to the Integration Engine. The File adapter has to deal with "large" XML messages(max at the moment is 65 Mb) and the engine fails with the following error when transferring the big XML file: "ERROR: Finished sending to Integration Engine with error "java.lang.OutOfMemoryError". Skip confirmation and quit this loop".
    As far I got the information from the customer the memory use of the Plain adapter engine is set to 512Mb. This is maybe to low. But I don't know where to look for this, I only have the adapter web interface in front of me, no access to the OS it self via for example remote connection.
    On the Integration Engine I know there is the ability to split large message with the file adapter(File Content Conversion), but I don't know this for the Plain Adapter Engine. Is there a possibility to do this also on the Plain Adapter Engine?
    Thanks in advance for any input.
    Greetings,
    Patrick

    Hi Sameer,
    Thanks for your answers.
    On the first solution, yes that is possible, we first decided to see if the legacy system can do the splitting, before starting developing a Java program.
    On the second solution, as far as I know is this solution possible on the Integration Engine. But we are facing the problems on the Plain J2SE Adapter Engine. I went trough that documentation(link:
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm ), to look for I similiar solution in the Plain Adapter Engine. So my question is, is this possible with the Plain Adapter? And if so, what kind of parameters I need to use to achieve this.
    Regards,
    Patrick

  • ADAPTER in the Central Adapter Engine

    Hello
    I have problem with my Adapter in the Central Adapter Engine. There are to adapter inside, a JMS and A JDBC. This two adpater have in the monitoring status green. But JMS adapter get no message in the system, and by the JDBC adapter the select is not getting Data, but the update make it the right update to the databank. Can somebody help or gives there a log on the system.
    Regards Thomas Neuhaus

    Hi Thomas,
    I think you are using Message Monitoring transaction SXMB_MONI only.
    Central Adapter Engine log:
    Start Runtime Workbench (i.e. http://<xi_host>:<j2ee_port>/rwb/index.jsp)-> Message Monitoring -> select Component af... -> Display -> select Period -> Start
    Regards,
    Jiri

  • Could not complete the command because of a problem using the Adobe Color Engine

    Hi all
    This bizarrely started this morning - completely out of the blue - and I've no idea why.
    Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
    Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
    As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
    Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
    I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
    At present I can only safely carry out the work 'manually' by completing all the actions myself.
    I can think of no settings that have changed and the OS hasn't been updated in a while.
    I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
    Any help appreciated as I have a shedload of stuff to process.
    Best wishes
    TP

    OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
    BUT!
    Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
    Will try that out this afternoon, but for now: WIN!
    Many thanks for the suggestion!
    TP

  • Whats the Advanced Adapter Engine ?

    What is Advanced Adapter Engine and how its different from normal adapter engine

    HI Prathna
    You use the Advanced Adapter Engine to connect the Integration Engine to SAP systems (RFC adapter) and non-SAP systems. You use the various adapters in the Adapter Engine to convert XML- and HTTP-based messages to the specific protocol and format required by these systems, and the other way around.
    Using Integrated Configuration you can define a local Message Processing on the Advanced Adapter Engine. The Advanced Adapter Engine provides mapping and routing for this locally. Message Processing is only executed on the Advanced Adapter Engine from one adapter to another without the involvement of the Integration Engine. You can gain a great improvement in performance.
    You can implement all adapters on the Adapter Engine for a local Message Processing on the Advanced Adapter Engine, apart from the RNIF adapters and the CIDX adapters.
    If you do not use Integrated Configuration, Message Processing will always be performed by the Integration Engine to execute the routing and mapping there.
    The Advanced Adapter Engine is a separate software component that is automatically installed on the Integration Server. In this case, it is the central Advanced Adapter Engine. However, you can also install the Advanced Adapter Engine separately on another host. This is then a non-central Advanced Adapter Engine.
    cheers
    Abhishek

  • Troubleshooting the J2EE-Adapter Engine PDF

    Hi,
    anyone has:
    Troubleshooting the J2EE-Adapter Engine.pdf
    presentation from the webinar ?
    if so can you give me the link?
    (it's not available on the https://www.sdn.sap.com/sdn/webinar.sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.sdn.wcm.compound.docs//library/uuid/47a9a361-0301-0010-d39a-dd40d34b2e9d ) but maybe someone has it
    Thanks:)
    Regards,
    michal
    Message was edited by: Michal Krawczyk

    Michal,
    Did you get the pdf ? If yes, please send it to [email protected]
    Thanks
    SKM

  • Could not complete the command because of a problem using the Adobe Colour Engine??

    When I am playing back a set of recorded actions, I receive a message that says "Could not complete the command because of a problem using the Adobe Colour Engine". This occurs after I copy a part of an image to paste it onto a new file. It occurs during the "Make" part(making a new file) and I was just wondering how to fix it.

    It's a known (but esoteric) bug in Photoshop CS5 and earlier, seen with grayscale images.  It used to crash utterly, but after I reported it I think they patched Photoshop 12.0.something to avoid the crash.  However, the step still fails when you make a new grayscale image in an action.
    I saw it because I created an action to paste the clipboard into new document, all in one motion.  It virtually always works as long as I have a colored image in the clipboard.  But not grayscale.
    One workaround, which is not particularly convenient, is to turn on prompting for the Make new image step.  I haven't used this workaround for a while, but it used to be that if you confirmed the "File New" operation manually it would continue and work.  I don't know if the workaround is still valid.
    -Noel

  • Could not initialize photoshop because of a problem using the adobe color engine (Win 7)

    Was running the lastest version of Photoshop CS5 and added a second quad graphics card and 4 more monitors.  Now PS will not start and I get the error message "could not initialize photoshop because of a problem using the adobe color engine."
    Computer has 2 NIVDIA Quadro4 NVS420 graphics boards with 8 Samsung SyncMaster 1920x1080 monitors.  If I disable 4 of the monitors CS5 starts normally.  I do not have to remove the added graphics card.  When I extend the desktop again to all 8 monitors I get the error above.
    How do I trouble-shoot the problem?  Is it Photoshop, NIVDIA or Windows 7?

    Well, not exactly a full solution yet (at least for my setup), but I am certain now that this issue is (mostly) caused by nVidia's drivers. You may be able to fix your setup by simply installing the latest drivers for your NVS420 cards (266.45 for Win 7/64 rel. 01/12/2011).
    Since you are using two identical cards, this could do the trick.
    Caveats - Make sure you:
    1. Select Custom Install, the Express Install will most likely not work properly.
    2. Unselect the Audio Driver (if available), the nVidia HD(MI) Audio driver could
        screw up your speech recognition (if you use it) or other audio software - it did for me.
    3. Select Clean Install. If you don't, files like C:\Windows\System32\drivers\nvlddmkm.sys
        and several other driver related files will not be overwritten, causing all sorts of neat effects.
    4. After the Install is complete, reboot your system whether the Installer prompts you or not.
    After testing various configurations, disabling two - six of my eight monitors I am at this point:
    I am now using nVidia's lastest and greatest piece of crap (read driver), version 266.58, released just two days ago. After an initial snag with maximized windows extending to the bottom of the main monitor (underneath the taskbar), a re-install & reboot solved that issue.
    All three driver versions tested (260.89, 260.99, 266.58) now allow me to start PhotoShop without any problems; providing I first disable the two monitors fed by my onboard graphics (nVidia 780a based), leaving me with six monitors connected to three GTS-450 cards.  I can even re-enable the two other monitors once the program is open, and it continues to work fine. However, I must disconnect them again for the next start of PhotoShop.
    On an interesting side note:
    After disabling six monitors (leaving only two on a GTS-450), I was also able to open and run SoundBooth CS5, which previously would not open, citing the audio driver as the problem. After sucessfully starting SoundBooth I could re-enable all six other monitors (incl. onboards),
    and that program now opens and works fine with all 8 monitors connected. [ODD !!!]
    Other than Adobe Software, I've had only one other issue with my setup:
    When playing online poker at PokerStars, occasionally and quite randomly one of multiple tables would freeze up. I'll try disabling the two onboard monitors for that program as well to see whether the random freezes stop.
    Overall, while I think that Adobe produces fine software and nVidia has been in need of an overhaul for quite some time now, I also think that Adobe and nVidia software engineers need to work more closely together to ensure that problems like this don't arise in the first place after a product has been released to the public. IMHO, this is avoidable!
    PS:
    Here's a link to a great tool for multiple monitors, Display Fusion by Binary Fortress.
    I use the free version, it allows you to do cool things like have individual wallpapers for all
    your monitors, or stretch a single image across all monitors. With the Pro Version ($25),
    you can also add individually customizable taskbars to each monitor, and a lot more.
    http://www.displayfusion.com/

  • Problem posting message from adapter engine to IS

    Hello,
    We experience the next problem. We use JMS sender adapter to post message into XI. Message comes into the adapter engine and tries to post it into integration server. http://<host>:8000/sap/xi/engine?type=entry
    When posting we get the (very generic) error:
    Received HTTP response code 500..
    The Adapter engine does a retry every 5 minutes.
    After the 3th retry most of the status of the message in the adapter engine is set to NON_DELIVERED.
    However for what ever reason sometimes  the 2nd or 3th time the message does get processed to the IS.
    Is there anyone who experienced similar problems or does anyone know a solution for this.
    tnx
    Emile

    Hi,
    Is this the problem with JMS adapter or with any other Adapter.
    <b>8000</b>, is this the same port in smicm-->services. B'cos sometimes people might have a different instance number even.
    Cheers,
    Siva Maranani.

  • Problems with Non central Adapter Engine

    Hi Friends,
    We installed an non central Adapter engine. Then as per the documents we made entry for connection in exchange profile.Then in visual administrator in SLD data supplier i provided the required credentials for connecting to my XI server.
    XILDUSER and XISUPER these users and passwords were provided for connection.
    From visual admin we manually send the trigger to hit the SLD and make an entry there.It was successful in visual admin.
    But after doing all this successfully we are not able to see the Local i.e non-central adapter in our XI SLD as well as in RWB.
    can anyone throw some light on it.
    Thanks,
    yomesh

    Hi Friends ,
    I have solved this problem. The password provided for XILDUSER was wrong thats why it was not able to register in the SLD .also the differents user has to be created in Security provider service in visual administrator.
    then it worked finr.
    Yomesh

  • 1636215 - Performance monitoring for the Advanced Adapter Engine

    Hi ALL,
    How can we monitor the performance by changing the parameter to true in the above note please please help me
    Thanks,
    Raj

    Hi Dheeraj,
    Since you've gone through the note, I'm assuming you know how to activate the performance monitoring for adapter engine.
    However, there are reservations against doing it in any system Dev/Quality/Production. Reason being, it becomes performance/load intensive when the perf. monitoring is on.
    Still, you can diagnose bottlenecks and execution trends in Dev/Quality using performance monitoring as suggested in the note but be aware that your box is coping well with it. Please note, once activated, you don't have to do anything else. System will automatically collect performance data and you will be able to browse through it using the performance monitoring link.
    How to use it???
    You see a performance monitoring link in Monitoring Home (navigate via Configuration and Monitoring home from PI/PO homepage).
    It will help you analyze the flow of message on periodical basis (hourly/daily etc) and will give you more stats on number of messages in that time duration, average time taken, message sizes (min, max and avg), interface-by-interface detail of runtime consumption at every stage etc.
    Please go through standard SAP help for more clarity:
    Monitoring Performance - Advanced Adapter Engine - SAP Library
    Apart from this, there is this great blog by Suseelan around monitoring:
    http://scn.sap.com/docs/DOC-35805
    Hope this helps.
    Regards,
    Abhishek

  • Can't reach the Central Adapter Engine (HTTP 403)

    Hello,
    in a simple scenario (AdapterEngine -> IntegrationEngine -> AdapterEngine) we get a HTTP 403 failure in the 'Call Adapter' - Service.
    When we try to connect the URI "http://:50000/MessagingSystem/receive/AFW/XI" and logon with user XIISUSER we get the same error.
    XI Release is: XI3.0 SP17 ...  Adapter Engine is the central engine ...
    ... any ideas?
    Thanks
    André

    Hi Andre,
    HTTP 403 is related to authorisation error.
    This topic has already been discussed.  I paste hereunder:-
    Check if the service users XIAFUSER and XIISUSER are not
    locked.(TCODE: SU01)
    Also check if these service users have sufficient authorizations.
    XIAFUSER: SAP_XI_AF_SERV_USER_MAIN,SAP_XI_APPL_SERV_USER
    XIISUSER: SAP_XI_IS_SERV_USER_MAIN,SAP_XI_IS_SERV_USER
    I hope this provides you a solution.
    Regards.
    Praveen

  • A problem with the network adapter, help please

    I have an hp touchsmart pc 600 1040uk and today i woke up to find that the network adapter (nVIDIA) dissapeared and no local area connection. Also i can not connect to the wireless network
    I tried everything starting by restarting my router then removing all the cables and retarting the pc. Also tried adding a new device and everything didnt work. I even restored the pc to the factory settings and after starting over new still there is no local area network, just the wireless and bluetooth adapters and the wireless did not connect
    Another problem is that when i restored the pc to factory settings the recovery program asked me to backup my pc and I did the backup and saved it in an external hard disk, and now I cant restore that back coz it dosent appear in the window of backups to restore
    Plllllllllllllllllllllllllllllllllllllllllease help me, thanks

    I found this on another post by "Scott", and it worked. 
    http://support.apple.com/kb/TS2048?viewlocale=en_US
    Sure did take some searching to get to the answer.

  • Problem with the SOAP adapter !

    Hi!
    We are trying to use a WebServices from XI.
    In the WSDL file that we have imported and use'd in
    our mapping the information about the soap header look's
    like this :
    <wsdlsoap:header message="impl:serviceRequest" part="toCountry" use="literal" />
    <wsdlsoap:header message="impl:serviceRequest" part="fromCountry" use="literal" />
    <wsdlsoap:header message="impl:serviceRequest" part="language" use="literal" />
    <wsdlsoap:header message="impl:serviceRequest" part="customerCodeOwner" use="literal" />
    <wsdlsoap:header message="impl:serviceRequest" part="customerCode" use="literal" />
    <wsdlsoap:header message="impl:serviceRequest" part="userId" use="literal" />
    <wsdlsoap:header message="impl:serviceRequest" part="userPassword" use="literal" />
    But then the message leave the SOAP adapter
    it looks like this:
    <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
    <SOAP:Header/>
    <SOAP:Body>
    <ns1:serviceRequest xmlns:ns1='http://www.dnbnordic.com/brg/NRGDecisionSupportDSC/wsdl'>
    <nRGDecisionSupportDSCRequest>
    <ns2:criteria xmlns:ns2='http://www.dnbnordic.com/brg/NRGDecisionSupportDSC/request'>
    <ns2:socialSecurityNumberApplicant>XXXXXXXXXX</ns2:socialSecurityNumberApplicant>
    <ns2:conversationCode>X</ns2:conversationCode>
    </ns2:criteria>
    </nRGDecisionSupportDSCRequest>
    <toCountry>XX</toCountry>
    <fromCountry>XX</fromCountry>
    <language>XX</language>
    <customerCodeOwner>SYD9001</customerCodeOwner>
    <customerCode>XXXXXXX</customerCode>
    <userId>XXXX</userId>
    <userPassword>XXXXXX</userPassword>
    </ns1:serviceRequest>
    </SOAP:Body>
    </SOAP:Envelope>
    The SOAP header info. is in the body !
    Ofcourse the message fails !!
    Any ideas ??
    //Stig

    Hi Stig,
    Although specified in the WSDL 1.1 spec, the use of soap:header is quite rare.
    And having a soap header consisting of multiple parts and not referring to single XSDL element is a bit in conflict with the document/literal approach.
    Bottom line: please try and convince your business partner to not use the soap:header trick and stick to standard document/literal web services.
    Kind regards, Guy Cretgs

  • A problem with the File adapter receiver

    Hi people,
    In the Integration Monitoring the system represent this problem:
    File adapter receiver channel Mainframe_FA_StructureAch_CC_RC is not initialized. Unable to proceed: null
    Any body can help me!!
    Thanks!!

    Hi ,
    Just check is it Activated ? Go to RWB->Adapter Monitoring
    Check the status there ..
    To more- Go to service market place to view the Adapter Monitoring PDF
    https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
    Hope this helps.
    Regards,
    Moorthy

Maybe you are looking for