Problem in using applications

I'm using nokia C5-00.i had a problem while using nimbuz and fring...the actual problem is they both use VoiPAudioSrv of different version..that is nimbuz uses VoiPAudioSrv version 1.00 and fring uses VoiPAudioSrv version 2.02 but in my phone i can't install both of the versions at the same time..as a result i can use either one of them at the same time...what can i do ? Plz help...reply me with a best solution...
My advance thanx 2 Nokia..

I have the same problem. I am trying to invoke a business event from Weblogic SOA 11g, but I cannot. I defined OracleAppsAdapter and then complted all XML Gateway setups. I created a composite BPEL process and deployed into SOA 11g server and then created a PO and approved it in R12.1 environment, I am expecting that it is kick off my BPEL process but it doesn't. I don't know how to debug it. I noticed that there is an error while I am deploying my BPEL process into SOA server. I am not sure if it causing issue. Same configuration works fine to invoke PL/SQL API using eis/Apps/Apps adapter. But it doesn't work for WF business event type. Could anyone help me?
BINDING.JCA-11611
Invalid InteractionSpec Exception.
The javax.resource.cci.Interaction of type [class oracle.tip.adapter.apps.AppsWFBesQueueDequeueActivationSpec] is not supported.
You may have mistakenly looked up an adapter of the wrong kind. This is the database adapter.
Supported specs (for DatabaseAdapter) are [[oracle.tip.adapter.db.DBActivationSpec]]. Verify the values location in the deployment descriptor (i.e. weblogic-ra.xml) and jca address in the wsdl are correct and dont conflict with any other adapter.

Similar Messages

Problems in using Application Builder to Build a exe file with Report generation Toolkit

Hello,
It's my first time to build exe. But I have Problem when the VI have Report Generation toolkit VI.
It's no problem in VI Format , But It can't work when I build as EXE format
Can Anyone help me, and state step clearly in how to solve the problems?
Thank you!!

If the code works OK in the development system but not in an executable there are a few things you can check. The two most likely causes are:
There is an error occuring that your code isn't reporting.
There is a file path that under the executable isn't valid.
First make sure that all the error clusters are daisy-chained together in the subVI that you wrote to create and populate the excel file. Next make sure that the end of that chain goes to an indicator on the VI's front panel.
Second, make sure there are indicators on other key parameters like the path the file is trying to write to.
Third, temporarily modify the VI properties of that excel IO VI to open it's front panel when called, and rebuild your application. The next time you run the application the front panel will open when you try to write to the excel file and you should be able to see what is happening.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

IPhone problem with server applications...

I have been having problems recently using applications that access a "server." Apps such as "maps" and "sportacular" both tell me they have problems connecting to the server. It doesn't matter on my location or availability of a network, the apps still don't work.
Any help?

Does the same occur after powering your iPhone off and on, and/or after doing a reset, which is done by pressing and holding the Home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so?
I haven't experienced the same with the Maps application - not once, but I have experienced this with Sportacular on occasion but only on weekends when there are more sports and more people accessing Sportaculars' servers.

Problem in running application(using ADF) on BEA Weblogic Server

Hi..,
I am Gunardy Sutanto from Indonesia. Currently, I had a problem in deploying application which is using ADF framework in BEA Weblogic Server(WLS 8.1). I also add all the libraries which were required for running this application. But I found some error when I ran this application. About the error message that I found from log file which is generated by BEA Weblogic Server 8.1, herewith I attach the detail of the error message :
<Error> <HTTP> <BEA-101020> <[ServletContext(id=27825828,name=bp_presentment,context-path
=/bp_presentment)] Servlet failed with Exception
oracle.jbo.PCollException: JBO-28030: Could not insert row into table PS_TXN, collection id 16,408, persistent id 1
at oracle.jbo.PCollException.throwException(PCollException.java:39)
at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1845)
at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:561)
at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:684)
at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:643)
at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:461)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:277)
at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5119)
at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5011)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:7741)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3923)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(ApplicationPoolImpl.java:2161)
at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(ApplicationPoolImpl.java:1261)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:717)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:634)
at oracle.jbo.common.ws.WSApplicationModuleImpl.endRequest(WSApplicationModuleImpl.java:2672)
at oracle.adf.model.bc4j.DCJboDataControl.endRequest(DCJboDataControl.java:1283)
at oracle.adf.model.servlet.ADFBindingFilter.invokeEndRequest(ADFBindingFilter.java:300)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:249)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
## Detail 0 ##
java.lang.ClassCastException
at oracle.jbo.pcoll.OraclePersistManager.updateBlobs(OraclePersistManager.java:1613)
at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1832)
at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:561)
at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:684)
at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:643)
at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:461)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:277)
at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5119)
at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5011)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:7741)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3923)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(ApplicationPoolImpl.java:2161)
at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(ApplicationPoolImpl.java:1261)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:717)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:634)
at oracle.jbo.common.ws.WSApplicationModuleImpl.endRequest(WSApplicationModuleImpl.java:2672)
at oracle.adf.model.bc4j.DCJboDataControl.endRequest(DCJboDataControl.java:1283)
at oracle.adf.model.servlet.ADFBindingFilter.invokeEndRequest(ADFBindingFilter.java:300)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:249)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
I hope this is enough for somebody for solving this problem. If someone have the solution for this problem, please contact me by e-mail to [email protected].
Thanks,
Gunardy

I already set the value for jbo.server.internal_connection and then deployed to Weblogic Server. When I was tested the application, all the records from table had shown on the screen but I found the application can't insert row to table PS_TXN. I I want to know it always happened?
Herewith I attach the detail log from log file which was generated by Weblogic Server:
oracle.jbo.PCollException: JBO-28030: Could not insert row into table PS_TXN, collection id 162, persistent id 1     at oracle.jbo.PCollException.throwException(PCollException.java:39)
     at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1845)
     at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:561)
     at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:684)
     at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:643)
     at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:461)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:277)
     at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5119)
     at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5011)
     at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:7741)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3923)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(ApplicationPoolImpl.java:2161)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(ApplicationPoolImpl.java:1261)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:717)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:634)
     at oracle.jbo.common.ws.WSApplicationModuleImpl.endRequest(WSApplicationModuleImpl.java:2672)
     at oracle.adf.model.bc4j.DCJboDataControl.endRequest(DCJboDataControl.java:1283)
     at oracle.adf.model.servlet.ADFBindingFilter.invokeEndRequest(ADFBindingFilter.java:300)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:249)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6316)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
## Detail 0 ##
java.lang.ClassCastException
     at oracle.jbo.pcoll.OraclePersistManager.updateBlobs(OraclePersistManager.java:1613)
     at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1832)
     at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:561)
     at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:684)
     at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:643)
     at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:461)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:277)
     at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5119)
     at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5011)
     at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:7741)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3923)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(ApplicationPoolImpl.java:2161)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(ApplicationPoolImpl.java:1261)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:717)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:634)
     at oracle.jbo.common.ws.WSApplicationModuleImpl.endRequest(WSApplicationModuleImpl.java:2672)
     at oracle.adf.model.bc4j.DCJboDataControl.endRequest(DCJboDataControl.java:1283)
     at oracle.adf.model.servlet.ADFBindingFilter.invokeEndRequest(ADFBindingFilter.java:300)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:249)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6316)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
Besides that, I found new error when I was starting Weblogic Server. Herewith, I attach the detail of the error message:
java.lang.NoClassDefFoundError: org/apache/commons/collections/FastHashMap$KeySet
     at org.apache.commons.collections.FastHashMap.keySet(Unknown Source)
     at org.apache.struts.action.ActionServlet.destroyDataSources(ActionServlet.java:769)
     at org.apache.struts.action.ActionServlet.destroy(ActionServlet.java:431)
     at weblogic.servlet.internal.ServletStubImpl$ServletDestroyAction.run(ServletStubImpl.java:1086)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.ServletStubImpl.destroyServlet(ServletStubImpl.java:569)
     at weblogic.servlet.internal.ServletStubImpl.destroyServlet(ServletStubImpl.java:596)
     at weblogic.servlet.internal.ServletStubImpl.destroyServlet(ServletStubImpl.java:581)
     at weblogic.servlet.internal.WebAppServletContext.destroyServlets(WebAppServletContext.java:5797)
     at weblogic.servlet.internal.WebAppServletContext.destroy(WebAppServletContext.java:5675)
     at weblogic.servlet.internal.ServletContextManager.removeContext(ServletContextManager.java:187)
     at weblogic.servlet.internal.HttpServer.unloadWebApp(HttpServer.java:706)
     at weblogic.servlet.internal.WebAppModule.destroyContexts(WebAppModule.java:764)
     at weblogic.servlet.internal.WebAppModule.rollback(WebAppModule.java:742)
     at weblogic.j2ee.J2EEApplicationContainer.rollbackModule(J2EEApplicationContainer.java:2942)
     at weblogic.j2ee.J2EEApplicationContainer.rectifyClassLoaders(J2EEApplicationContainer.java:1429)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1176)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
     at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2634)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2584)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2506)
     at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:833)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:542)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:500)
     at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
So, I need someone to sove this problem. I am looking forward for hearing from you.
Thanks,
Gunardy

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
     Dim r as New ReportDocument
     'v is the name of the Crystal ActiveX Report Viewer Control
     r.Load("C:\Report1.rtp")
     v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

TS3376 I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved

I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved one.

Had the same problem and the same message -- was suddenly unable to access icloud apps on my pc, also using Windows 7 and Internet Explorer. After several days of pulling my hair out, decided to try a different browser and was able to get in by using Firefox instead of Internet Explorer. Hope this helps.

Problem in using new InitialContext when running client application

Hi All,
We are having a web application which runs on weblogic server 6.1.
We are loading a servelet at startup which will load the application specific
properties file and bind it with the context.
In one of the classes in the .ear file we are looking up the data source like
this
InitialContext _initialContext = new InitialContext();
dataSource = (DataSource)
initialContext.lookup(ClaimsConstants.CLAIMSRDBMS);
con = dataSource.getConnection();
This works fine through the jsp.
But when I run a separate client program this lookup is failing.
I tried another way of looking up like this
     Properties h = new Properties();
     h.put(Context.INITIAL_CONTEXT_FACTORY,
          "weblogic.jndi.WLInitialContextFactory");
     h.put(Context.PROVIDER_URL, url);
     Context _initialContext = new InitialContext(h);
dataSource = (DataSource)
initialContext.lookup(ClaimsConstants.CLAIMSRDBMS);
But the weblogic server got hanged for some time after it gave no messages coming
idle exception.
If any body knows the solution for this please reply. I am trying to develop an
application client but I don't know hoe to proceed. Any examples I can get for
writing a application client using weblogic is very much welcome.
Please give your valuable suggestions.

Hi Krishna,
servlet/jsp programs will work successfully in getting initial context of
application server, because they runs at server side, and server
automatically loaded the client library.
If you are using application client, you need to point the weblogic.jar the
application client classpath.What is the exception it is throwing?
Can you test the weblogic samples from the following location of your
installation
\bea\wlserver6.1\samples\examples
Thanks
Kumar
"Krishna Kumar" <[email protected]> wrote in message
news:3def5758$[email protected]..
>
Hi All,
We are having a web application which runs on weblogic server 6.1.
We are loading a servelet at startup which will load the applicationspecific
properties file and bind it with the context.
In one of the classes in the .ear file we are looking up the data sourcelike
this
InitialContext _initialContext = new InitialContext();
dataSource = (DataSource)
initialContext.lookup(ClaimsConstants.CLAIMSRDBMS);
con = dataSource.getConnection();
This works fine through the jsp.
But when I run a separate client program this lookup is failing.
I tried another way of looking up like this
Properties h = new Properties();
h.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
h.put(Context.PROVIDER_URL, url);
Context _initialContext = new InitialContext(h);
dataSource = (DataSource)
initialContext.lookup(ClaimsConstants.CLAIMSRDBMS);
But the weblogic server got hanged for some time after it gave no messagescoming
idle exception.
If any body knows the solution for this please reply. I am trying todevelop an
application client but I don't know hoe to proceed. Any examples I can getfor
writing a application client using weblogic is very much welcome.
Please give your valuable suggestions.

Problem using application client for local stateful session bean

Hi,
I have deployed a local stateful session bean in Sun J2EE 1.4 application server.
On running the applclient for the stateful session bean application client i get the following error:
Warning: ACC006: No application client descriptor defined for: [null]
cant we use application client for local stateful session beans. becoz the application runs smoothly when i changed the stateful sesion bean to remote.

Hi,
No, an ejb that exposes a local view can only be accessed by an ejb or web component packaged within the same application. Parameters and return values for invocations through the ejb local view are passed by reference instead of by value. That can't work for an application client since it's running in a separate JVM.
--ken

Application Exception using @Application not working

I'm trying to create 2 business application exception using the @Application annotation on my 2 java exception class. The first exception is a StarException class that extends java.lang.Exception (per ejb 3.0 spec). Below is snippet of the class.
@ApplicationException(rollback=true)
public class StarException extends Exception {...}.
As you can tell that this is a check exception and will rollback transaction when it occurred. I have another exception class called StarRuntimeException that extends java.lang.RuntimeException. This is also mention on ejb 3.0 spec and is useful if you don't want to catch the exception on the server side and just throw it and the client will receive such application exception class. Below is a snippet of the class ...
@ApplicationException(rollback=false)
public class StarRuntimeException extends RuntimeException {...}.
By the way I'm using this exception in my wls 10.3 webservices stateless beans (jax-rpc 1.1). Some of the methods throws these 2 exceptions.
There are 2 problems with this application exception during runtime on the client side.
1. Regarding StarException, the client can catch this exception when the webservice method throws this exception. The problem is that the error messages is null. Tried both getMesssage() and getLocalizedMessage() are all null.
2. Regarding StarRuntimeException, the generated client stubs and artifacts does not even throw this exception, therefore it will not the caught. This exception is wrapped inside RemoteException instead.
Your help are needed. Thanks

Ok. I figured it out. The url rewrite was missing in the config. Put it there and its working now.

App Store problem, appear an application update that does not exist applications

I have an iMac 2.5 Ghz Intel Core I5 and operating system Mac OS X Version 10.7.3
The problem is an application (Angry Birds) in my app store's update section that doesn't exist my installed applications.
It has been seen update section for two months and that is created by an account which is not my account
How can I remove this object from my app store's update section?
<Edited by Host>

Hi..
Unfortunately, it sounds like you are the subject of pirated software.
Follow Dahveed's help here > app update available but not an app on...: Apple Support Communities
You can report this to Apple using the email form here > Apple - Support - Mac App Store - Contact Support

Hello, I have this problem on updating applications on my iPhone 4s 5.1.1 i dont know if you can help me with. when ever i want to update an application on apple store i get a different user name then mine(slamdance@cracked.by) this user name is not mine

Hello,
I have this problem on updating applications on my iPhone 4s 5.1.1 (jail broken) i dont know if you can help me with.
when ever i want to update an application on apple store i get a different user name then mine([email protected]) this user name is not mine but its always there only on updating my app's.
thanking you in advance for your kind help.

Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have and forfeit any support from this forum.

Problem in using MySQL in JSF Pages

Hi,
I am facing a problem regarding use of MySQL in JSF.
I am using IBM RAD 6.0 for application developement.
Previously creating a normal java application which is used of retrieval of the data from the database was working fine. by including j/connector jar file in java build path.
But when same program is converted to web service and accessed through a JSF page using a managed bean it is not working. It throws classNotFoundException
Please reply at your earliest.
Thanks in advance.
Regards,
Amit
code :-
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
public class BeanClass
     public String display()
          Connection conn = null;
          Statement stmt = null;
          ResultSet rs = null;
          String returnDate = "";
          try
               Class.forName("com.mysql.jdbc.Driver").newInstance();
               System.out.println("Sucess");
               conn=DriverManager.getConnection("jdbc:mysql://localhost/switching","root","pspl");
               System.out.println("Sucess******");
               stmt = conn.createStatement();
               System.out.println("Sucess^^^^^^^^^");
               rs = stmt.executeQuery("SELECT * FROM log1 where senderId = '008' ");
               System.out.println("Sucess#########");
               while(rs.next())
                    System.out.println("Date : " + rs.getString("expDate"));
                    returnDate = rs.getString("expDate");
               System.out.println("Final success");
               System.out.println("Sucess@@@@@@@@@@@@@@@@");
          }catch(ClassNotFoundException cnfe)
               System.err.println("Drivers not found " + cnfe.toString());
               cnfe.printStackTrace();
          catch(IllegalAccessException iae)
               System.err.println("Access Exception");
          catch(InstantiationException ie)
               System.err.println("Instatiation Exception");
          catch(SQLException se)
               System.err.println("SQL EXCEPTION");
               se.printStackTrace();
          System.out.println("Date is = " + returnDate);
          return returnDate;
Errors are :-
[5/3/06 10:47:33:358 IST] 00000061 SystemErr R java.lang.ClassNotFoundException: com.mysql.jdbc.Driver     at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
     at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
     at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
     at java.lang.Class.forName1(Native Method)
     at java.lang.Class.forName(Class.java(Compiled Code))
     at packBean.BeanClass.display(BeanClass.java:29)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
     at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
     at com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeMethod(JavaDispatcher.java:178)
     at com.ibm.ws.webservices.engine.dispatchers.java.JavaDispatcher.invokeOperation(JavaDispatcher.java:141)
     at com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processRequestResponse(SoapRPCProcessor.java:423)
     at com.ibm.ws.webservices.engine.dispatchers.SoapRPCProcessor.processMessage(SoapRPCProcessor.java:388)
     at com.ibm.ws.webservices.engine.dispatchers.BasicDispatcher.processMessage(BasicDispatcher.java:134)
     at com.ibm.ws.webservices.engine.dispatchers.java.SessionDispatcher.invoke(SessionDispatcher.java:203)
     at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:225)
     at com.ibm.ws.webservices.engine.handlers.jaxrpc.JAXRPCHandler.invoke(JAXRPCHandler.java:151)
     at com.ibm.ws.webservices.engine.handlers.WrappedHandler.invoke(WrappedHandler.java:64)
     at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:225)
     at com.ibm.ws.webservices.engine.PivotHandlerWrapper.invoke(PivotHandlerWrapper.java:225)
     at com.ibm.ws.webservices.engine.WebServicesEngine.invoke(WebServicesEngine.java:279)
     at com.ibm.ws.webservices.engine.transport.http.WebServicesServlet.doPost(WebServicesServlet.java:717)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at com.ibm.ws.webservices.engine.transport.http.WebServicesServletBase.service(WebServicesServletBase.java:341)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1282)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:673)
     at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:80)
     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1802)
     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:84)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:469)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:408)
     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:286)
     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201)
     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103)
     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java(Compiled Code))
     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java(Compiled Code))
     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java(Compiled Code))
     at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java(Compiled Code))
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java(Compiled Code))

You have to put myfaces jar on the web-inf/lib

There was a problem loading the application

I find that I can log into iCloud with no problem but after, that every time I try to open an app I get the message
"there was a problem loading the application"
I'm using Safari 7.0.5
This has been going on for quite some time and during that period I've read many threads and followed various trouble shooting guides but I can't solve it. I really would appreciate any suggestions that you might care to offer.

Downloading Safari 5.1.7 will work, or at least that's how I now access iCloud and run the Apps. IE9 64-bit will also work. On my system it appears that IE9 32-bit has a problem with iCloud due to Norton Internet Security. When Norton's "Browser Protection" is disabled, IE9 32-bit works for me.
With Safari, I set its Homepage to iCloud so I'd have a direct link to the iCloud website.

Problem in using Tomahawk 1.1.3 jar with jsf-api.jar & jsf-impl.jar

Hi All,
i am facing the problem while using <t:panelTabbedPane> in jsp.APplication has jsf-api.jar and jsf-impl.jar and Tomahawk 1.1.3 jar files in lib folder. This is a Portal Application.While deplyoing on portal server, i am getting following exception
Nested Exception is java.lang.NoClassDefFoundError: javax/servlet/jsp/el/ELException
at org.apache.myfaces.shared_tomahawk.config.MyfacesConfig.<clinit>(MyfacesConfig.java:80).
if any faces problem previously, please help me out in debugging this issue

Please don't resurrect old topics. Start a new topic for each stand alone question. If necessary put links to the topics you found with search/google.
Back to the actual problem:java.lang.NoClassDefFoundError: javax/servlet/jsp/el/ELException The given class is missing in the classpath during runtime. Add that class, or at least the JAR file with that class, to the classpath of the runtime environment, then you're fine.

Problem in using LOV for validation-JHS 10.1.3

Hi all,
This problem was also noticed by Phil McDermott (Problem in using LOV for validation-JHS 10.1.3
I am following the demo and I noticed that the Use LOV for Validation functionality does not work on the browse page. However, it does work on the details page!
Another effect of this problem is that once you tried to validate on the browse screen, the lov button does not work anymore.
Thanks, Joep
Just found out that is does not work when entering "ph" like suggested in the tutorial. When I enter "p" and then tab to the next field, the lov popup does show.
Message was edited by:
Joep Hendrix

Thanks for your reply Steven.
I had the same problem as Joep reported here, following the steps at:
http://www.oracle.com/technology/products/jdev/tips/muench/jhstutorial/index.html#genandrunagain
Your solution works for me.
The "completed version of the tutorial application" also has this issue:
http://otn.oracle.com/products/jdev/tips/muench/jhstutorial/MyDemo.zip
Are there any other known issues for this tutorial? Where can I find such errata list?
many thanks
Jan Vervecken

Problem in using applications

Similar Messages

Maybe you are looking for