Problem in viewing a field in Segment type

Hi All,
I have added a field to an existing segment type . Now the problem is that I am not able to see the field when an Idoc is created.I am able to see the fields that was previously added, but not the one which I have added..Can you plese suggest me how can I rectify that...
It will be very helpful if you can send me steps of doing it..
Thanks in advance.
Regards,
Asish Dash

If your other two checks are correct and only if you want to
know the program or function module please check following things.
1. Each Message type will having a posting program, genarally it will be a function module.
2. This function module will be attached to a Process code.
3. You can check the the process code name in the Partner profiles.
4. After knowing your process code, please check WE41 and WE 42 for the function module name.
5. From this you can debug and find out.
Points please if this info is helpful..............
Thanks,

Similar Messages

PRINT PROBLEM IN SCRIPT IF FIELD IS CURR TYPE

one of the report print account statement so in this statement print balance and it print depends on credit and debit.
now problem is like
for example my credit value is 50,085.00 and debit value is 19,205.00 so the balance is 32,347.00-
in script not take (-)minus sign but i want this value with this sign in script so how it is possible?
this field is curr type .

i take one field pack type with decimal and then move curr type field to pack type and then print pack type field in script so solve this problem

Value put in the maintenace view for field of DOC type gets divided by 100

Hi all,
We have a product table ZPROD_T which contains one quantity column (QUANT) of the data type DOC. We have also created a view and a maintenance view for this table.
The problem is that when we add new values to the table using the maintenance view, the value that we add to the QUANT field gets devided by houndred. E.g. if we put in 4 in the QUANT field (type DOC), the value that we later see in the table is 0,04!
How do we go about to solve this problem and get the correct value in the table? Should we change the maintenance view somehow or change the data type in the QUANT field from DOC to something else?
All help is greatly appriciated!
BR,
Armin

Yes, that would be an option, but I was kinda hoping there was another way to solve this problem. Namely, when we would like to have ability to have decimal values in that field, e.g. if we have quantity in sqr meters or meters. Also if we change data type to QUAN than we need to put values in the "Currency/Quantity fields" in the table ZPROD_T, and at the time we are not sure about what unit of measure we are gonna have!
Is it possible to keep DOC data type and still get the correct values in the table?
/Armin

Unable to view the Fields inside Segment

Hi,
We are doing IDOC---File scenario
We have one IDOC "WPDWGR01" in R/3 and we imported that into IR.
When we are doing the mapping, that time we are unable to see the fields that inside this "E1WPW02" segment.
We have BEZEICH and VERKNUEPFG fields inside that segment.
We loaded the metadata also freshly by deleting the existing one.And we did the SXI_Cache also
When we Expanded (when we clicked E1WPW02 Seg )on the tree structure of the Imported IDOC from the Imported Objects, it is saying that "Schema for type WPDWGR01.E1WPW02 (category Data Type) not found"
And we are seeing the the Segments in Red color and no fields inside those segments
This is the Standard IDOC only, there is no Enhancements
Regards
Bopanna
Edited by: BOPANNA B on Mar 11, 2008 11:49 AM

It happens in the following case:
1) It was being edited by somebody and you imported the IDoc at the same time. ( some segments were locked and that is why few fields were missing)
2) check if the field level customization is done in that client , try to import it from some other client.
Hope this helps.
Regards.
Jeet

After idoc regenration unable to view the field in IDOC

Hi,
I have enhanced the business partner by EEWB.
After tha i have regenarted the message type CRMXIF_PARTNER_SAVE and bo type BUS1006 by Tcode BDFG.
After that also i am unable to view the field in Basin type CRMXIF_PARTNER_SAVE01 [message type CRMXIF_PARTNER_SAVE ].
New Zfield added through EEWB is available in CRMXIF_PARTNER_COMPLEX structre.But not coming in IDOC.
Please advice.
Regards
Malay

Hi,
From your thread i have understood that the EEWB extended fields have not appeared in the IDoc after regeneration.
For the customer enhancements there are some of the XIF segments provided by SAP to transport them to IDoc structure.
Now that you have added the customer fields using EEWB. Please add the fields
to CRMXIF_CUSTOMER_H and then regenerate the IDOC using BDFG.
After extending these above mentioned structure kindly regenerate the Idoc Structures. I recommend
not to add the enhancement fields to the CRMXIF_PARTNER_COMPLEX structure which might lead
to inconsistency.
You can make use of CRMXIF_CUSTOMER_H for customer enhancements.
Regards,
Venkat

Error while adding new field in the Segment type thru WE31.

Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 45B. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
Points will be rewarded
regards,
neslin.

Hi
You can create a new version. This will not create any problems. You might not be able to cancel the release because of upgrade.
Thanks
Vijay

Problem using SELECT-OPTIONS in an InfoSet with a field of data type UNIT.

I have created a simple InfoSet that links MARA with MARM. In the 'Selections' section of the InfoSet I have a variable named 'ZMEINH' defined as
Description: UOM
Selection Text: UOM
Format FOR: MARM-MEINH
EXTRAS: DEFAULT 'PAC' OPTION EQ SIGN I.
When I ran a query to allow selections on the MEINH field, instead of 'PAC' being the default, there was "***" showing in the UOM selection and if I attempted to execute the query it gave me a message that "Unit *** is not created in languague EN'. If I overide the "***" and enter 'PAC', I get the list of records that I expect.
I assume this is because MEINH has a data type of "UNIT".
How can I do a conversion so I can define a default value 'PAC' for MARM-MEINH in the infoSet that will carry through to any queries I created.
Thank you very much for any help.
Richard Salisbury

Thank you both for you help!
In our T006 there actually is a PAC and not a PAK. The T006A had as DE-PAK though.
I had this same type of language problem when trying to match an "order type". German is the "base" language in our system so maybe that means that raw data is stored with the German constant?
Anyway, I changed it to PAK and it works. When under a time schedule, that is what counts.
Thank you again for the quick response!
Richard Salisbury

Problem with a Dynpro field (type numc)

hi everybody.
I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
'cos i've got no problem with the other field (type char). But i can't solve it.
Anybody's got an idea?
Thanks

What you are seeing is the normal behavior of a numeric field represented by the SAPgui. This is how all numeric fields are displayed via SAPgui. If you don't want to see the 0, then you just change the field type to CHAR and handle accordingly.
Regards,
Rich Heilman

Problem with creation of IDOC Segment Type

Hi,
I tried to create IDOC Segment Type Z1LFA1 but error
prompted "Structure Z1LFA1 already exist.".
I tried deleting it at se11 but prompted
"You cannot edit object R3TR TABL Z1LFA1 with the
standard editor"
and at sm30-TADIR, but prompted
with "Cannot delete object directory entry, object exists."
How will go about this??
Please help!
Thanks!

hi,
yup, tried doing that on we31 but the segment does not exist yet.
we're currently upgrading from 4.6 to ecc, I think the structure
was tranferred to our ecc client but the idoc segment and idoc type were not. I'll just have to transport it then.
Thanks!

Field Prof.Segment is a required field for G/L Account 2100 454010

Hi Controlling Copa Expert,
user facing problem, at the time of Business Transaction , getting error while MIRO, " Field Prof.Segment is a required filed for GL 454010, kindly let me know where and wht input parameters for the same. Prof. Segment.
we have made Copa Report. as per client requirement. in this regard , as i understand ,all P&L GL Cost element field status group Profit Segment Required entry. just wht happened while doing Miro, getting error for 327225 i.e Price Diffrence gain. earlier FSG was G029 but i did changed Profit Segment Required entry . copy from G029 and given new name COPA . and copa FSG Profit segment required entry.
but finally we have change like earlier FSG i.e G029, coz at the time of Miro Profit segment filed was there but is was not active for input parameters. finally we have resolve the issues without Profitability segment... but its not right. so kindly requested to you ... where i have to config in Copa report.
Kind regards
Pranav Kumar
SAP FICO Consultant.

HI Hursikesh,
i want to give PSG at any how, if i give as optional problem resolved but Profitability denouement will not generate. we want to give PSG at any how, because we have made FSV financial statement version in FI . client want match through COPA Report. kindly help me how all the business transaction updated with Profitabilty Document generate.plzzze.
client want material cost under GL Group Head :- Manpower ,Consumables and Energy GL already assign in PA Structure, under Conversion cost . and revenues. so it will come gross Profit. but revenues updated based on Condition Types .. i don knw why nt updated.. as i understand user skip the PSG thats the reason , thats why i given FSG as mandatory in relevent GL FSG .now tell me wht should i do . for this issues scenarios matching with FSV with COPA report.
Note : in FSV P&L Account if m not wrong. not balance sheet item. FYI.
yr quick action will be highly appreciated.
Kind regards
Pranav
SAP FICO Consulatant.

Problem in creating new field using AET

Hi ,
We are facing a problem while creating a new field using AET.
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0190611650DB01471683520393954021End?blog=/pub/wlg/12716]
Im following this blog while creating the new field using AET.
After filling all the field details and trying to create a Transport request its going for a runtime error.
The error is happening in class CL_CRM_GENIL_AXT_API
method get_editable_properties.
data lr_field_ext type ref to cl_genil_field_extension.
field-symbols <axt_field_extension> type gtype_field_extension.
data lr_fieldext_ref type ref to if_axt_field_ext_access.
read table axt_field_extension_tab assigning <axt_field_extension> with key ext_bo       = is_key-ext_bo
                                                                          ext_bo_part = is_key-ext_bo_part
                                                                          extension_id = is_key-extension_id.
lr_field_ext = <axt_field_extension>-axt_extension.
if sy-subrc = 0.
While Debugging we can see that the table axt_field_extension_tab is having zero values during the last execution.
But the Zfield is getting generated and the status is in green.
Any suggestions will be highly appreciated.
Regards,
Sijo.
Edited by: sijokjohn85 on Sep 9, 2009 1:00 PM
Edited by: sijokjohn85 on Sep 10, 2009 12:49 PM

Hi,
you posted the same question again in a later post.
Here is my answer:
Hi,
the reason that AET does not work is because there is/are missing entries in one of DB table.
Namely the enhance BO assignment to the UI Object Type.
Could you please tell me, what is the UI Object Type in you current IC application.
In order to figure this out, you can put mouse cursor in one of the field in the UI and then press F2.
Then you can go to SM30 in SAP GUI open the View BSPDLCV_OBJ_TYPE and search for the UI object type.
Select the UI object type and see whether any enhanced BO is defined.
In your case it should be empty, otherwise you can use AET in IC.
And if it is empty we need to figure out which enhanced BO is relevant for the given UI Object Type.
Regards,
Steve
P.S. But still you can raise a CSN message.
The "Create New Field" should be in active mode.

Value is not retaining on a field of item type MessageRichTextEditor

Hi,
In my oaf page, i have a field of item type OAMessageRichTextEditor. And a view attribute of clob type is associated with this item. Whenever the user is entering some sql we are doing checks on the data whether that is a valid sql or not.the problem what iam facing is
suppose if user enters a valid sql, that will pass our checks and stored into the database. now if user trying to edit that sql with wrong sql, then it is throwing exception saying that invalid sql. But the field is not retaining the wrong sql , it is showing old valid sql only.How i can retain the new invalid sql in this OAMessageRichTextEditorBean of type CLOB.
Thanks
Satya

Satya,
Is it a EOVO based Bean or simply it's a VO based.
Regards,
Gyan

IDOC Segment Definition received instead of Segment type

Hello Folks,
When i send a Z Idoc Segment from A to B System, It is successfull from A System, but in B System sometimes its erroringout because in the inbound idoc Segment Definition is coming instead of Segment type.
For Example
From A System I have sent Z1P0002 segment
B System I have received Z2P0002000(Which is the segment definition for Segment type Z1P0002)
Any inputs to above problem?

Hi,
The problem may be due to system B using a older release version of the IDoc. In those scenarios, even though your IDoc type is recognized, it may not be possible for the reciever to determine the right segment version of the reciever.
There are options in the WE20 partner profile configuration, Field Segment release in IDoc type and Segment Appl. rel. which enable the partner system preventing from erroring out.
BR/Yogesh
Edited by: Yogesh Surender on Jun 1, 2009 12:34 PM

Idoc from XI to R3 losing fields and segments

The idocs I have posted from XI to R3 seem to lose some of the fields and segments.
The idoc is sent correctly from XI but the idoc posted in R3 have less fields and segments.
Any idea?
Thanks

Hi,
Check in transaction IDX2. You may need to delete the Idoc Type Metadata from IDX2 and then resend your XML file to XI. It will then generate the new metadata.
Also, there was once when we encountered this case but simply deleting it from IDX2 did not fix the problem. We then deleted the entry directly from the table IDXEDSAPPL and that fixed the problem.
You may also want to refresh your XI cache via tcode SXI_CACHE.
Thank you.
Best regards.

Field Symbol - Assign type conflict.

Hi, i active successfully my program. This is the code:
DATA ls_g_oref_appl(21) TYPE C.
FIELD-SYMBOLS: <fs_appl> TYPE REF TO cl_ftr_mj_appl.
ls_g_oref_appl = '(SAPLTB4E)g_oref_appl'.
ASSIGN (ls_g_oref_appl) TO <fs_appl>.
But when i execute it, i get a dump with this message:
"ASSIGN_TYPE_CONFLICT : You attempted to assign a field to a typed field symbol,but the field does not have the required type. "
Also, i get sy-subrc = 0, so the field symbol <fs_appl> has a value assign.
Any suggestions? I tried by changing the type of the field to ANY, but it didnt compile.
Thanks for the help,
Karla

Hi Daniel, I verified again the type of g_oref_appl, and it is : cl_ftr_mj_appl. I check the top of the include and g_oref_appl is there :
' DATA g_oref_appl TYPE REF TO cl_ftr_mj_appl. '
Hi, Naren, also i tried with the TYPE ANY, but it doesnt compile.
I notice this:
CLASS cl_ftr_mj_appl DEFINITION ABSTRACT.
Is there a problem with field symbols and abstracts class???
Thanks for all your help,
Karla.
Edited by: Karla Tinoco on Mar 5, 2008 11:46 PM

Problem in viewing a field in Segment type

Similar Messages

Maybe you are looking for