Problem Install NetWeaver CE 7.1,SP1 , Java Trial

I had installed NetWeaver CE 7.1 SP1 J2EE with following error message:
Jan 10, 2008 2:48:37 PM [Info]: handleStdout: c:/sapdb/programs/bin/x_server.exe update
Jan 10, 2008 2:48:37 PM [Info]: handleStdout: 18433 ERROR: Could not open application event log, rc = 1717
Jan 10, 2008 2:48:37 PM [Info]: executeCommands(): Try to establish dbmcli session
Jan 10, 2008 2:48:38 PM [Info]: executeCommands() DBConnect: user_logon control,*****
Jan 10, 2008 2:48:38 PM [Info]: executeCommands(): db_admin
Jan 10, 2008 2:48:43 PM [Info]: executeCommands() MaxDB: command failed: <DBMException -24994 ERR_RTE Runtime environment error
1,CE1 has stopped unexpectedly, (view Application Event Log) (OS error code 11000)>
Jan 10, 2008 2:48:43 PM [Info]: handleDB.dbActivate(): db_activate failed with rc = 306
Jan 10, 2008 2:48:43 PM [Info]: initialization of database return with rc: 306
Jan 10, 2008 2:48:43 PM [Info]: End ACTIVATE_DB [com.sap.inst.maxdb.xpf.DBActivate]
Jan 10, 2008 2:48:43 PM [Info]: rc:   1
Jan 10, 2008 2:48:43 PM [Info]: at:   2008.01.10 - 14.48.43[yyyy.MM.dd - HH.mm.ss]
Jan 10, 2008 2:48:43 PM [Info]: duration:   00:00:21[HH:mm:ss]
Jan 10, 2008 2:48:43 PM [Info]:
Jan 10, 2008 2:48:43 PM [Info]: Error during executing
Jan 10, 2008 2:48:43 PM [Info]: End Controller
Jan 10, 2008 2:48:44 PM [Info]:   at          : 2008.01.10 - 14.48.43[yyyy.MM.dd - HH.mm.ss]
Jan 10, 2008 2:48:44 PM [Info]:   durationt   : 00:00:32[HH:mm:ss]
Jan 10, 2008 2:48:44 PM [Info]:   status   : ERROR
Anybody known what is the matter ?

Please check SAP note 967742: password for db user IDs (control, superdba) should not contain '@' symbol.
Also, if you have a firewall installed, please check whether ports needed to communicate with Maxdb are opened:
http://help.sap.com/saphelp_nw04s/helpdata/en/41/8b95238cfc1035e10000000a114cbd/frameset.htm
Please award points if helpful

Similar Messages

Problems installing Netweaver Developer Workplace 2004

Dear Netweaver experts,
I have severe problems installing Netweaver Developer Workplace 2004 on windows XP.
I used sapinst for installing the Java sytem (Menue Java System->Oracle->Custom Installation).
After running through 34 of the 35 phases during which the sapinst tries to start the freshly installed J2EE engine I got the error :
CJSlibModule::writeError_impl() CJS-20057 Starting J2EE Engine J00 of SAP system J2E failed: after 84 s the state of the engine changed from "Starting" to "Stopped".
and changed my memory setting using the configtool.
Afterwards I tried to start the server in my MMC and it seemed to be running.
INFO
Execution of the command "D:\usr\sap\J2E\JC00\exe/startsap.exe 'name=J2E' 'nr=00' 'SAPDIAHOST=K-0017553'" finished with return code 0. Output: STARTSAP continues...
But when I had a closer look at the Process table at the MMC I saw that the server0 wasn't running
(Server 0 stopped Exit Code -2).
Now I don't know how to proceed.
Does someone of you know how I could get my J2EE server running ?
Below you find my present settings :
trc file: "D:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
node name   : ID3806050
pid         : 5496
system name : J2E
system nr. : 00
started at : Tue Dec 02 11:16:19 2008
arguments   :
    arg[00] : D:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
    arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC00_K-0017553
    arg[02] : -DSAPINFO=J2E_00_server
    arg[03] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC00_K-0017553
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
-> ms host    : K-0017553
-> ms port    : 3601
-> OS libs    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : K-0017553
-> ms port    : 3601
-> os libs    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID3806000 : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID3806050 : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID3806000            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] ID3806050            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
[Thr 5312] Tue Dec 02 11:16:19 2008
[Thr 5312] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5312] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4100] JLaunchRequestFunc: Thread 4100 started as listener thread for np messages.
[Thr 3328] WaitSyncSemThread: Thread 3328 started as semaphore monitor thread.
[Thr 5312] Tue Dec 02 11:16:20 2008
[Thr 5312] INFO: Invalid property value [JLaunchParameters/]
[Thr 5312] JStartupIReadSection: debug mode is specified by program arguments
[Thr 5312] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_18
JStartupIReadSection: read node properties [ID3806050]
-> node name       : server0
-> node type       : server
-> java path       : C:\j2sdk1.4.2_18
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -Djava.awt.headless=true -XX:PermSize=192m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:DisableExplicitGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:UseParNewGC -Drdbms.driverLocation=D:/Oracle/Ofs33/jdbc/lib/classes12.jar -Dsys.global.dir=D:/usr/sap/J2E/SYS/global/
-> java vm version : 1.4.2_18-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type    : server
-> java vm cpu     : x86
-> heap size       : 1024M
-> init heap size : 256M
-> root path       : D:\usr\sap\J2E\JC00\j2ee\cluster\server0
-> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class      : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters      :
-> debuggable      : yes
-> debug mode      : yes
-> debug port      : 50021
-> shutdown timeout: 120000
[Thr 5312] JLaunchISetDebugMode: set debug mode [yes]
[Thr 3648] JLaunchIStartFunc: Thread 3648 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack   : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: -Djava.security.policy=./java.policy
-> arg[ 3]: -Djava.security.egd=file:/dev/urandom
-> arg[ 4]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 5]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 6]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 7]: -Djco.jarm=1
-> arg[ 8]: -Dsun.io.useCanonCaches=false
-> arg[ 9]: -XX:NewSize=170m
-> arg[ 10]: -XX:MaxNewSize=170m
-> arg[ 11]: -XX:MaxPermSize=192m
-> arg[ 12]: -Djava.awt.headless=true
-> arg[ 13]: -XX:PermSize=192m
-> arg[ 14]: -XX:SurvivorRatio=2
-> arg[ 15]: -XX:TargetSurvivorRatio=90
-> arg[ 16]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 17]: -verbose:gc
-> arg[ 18]: -XX:+DisableExplicitGC
-> arg[ 19]: -XX:+PrintGCDetails
-> arg[ 20]: -XX:+PrintGCTimeStamps
-> arg[ 21]: -XX:+UseParNewGC
-> arg[ 22]: -Drdbms.driverLocation=D:/Oracle/Ofs33/jdbc/lib/classes12.jar
-> arg[ 23]: -Dsys.global.dir=D:/usr/sap/J2E/SYS/global/
-> arg[ 24]: -Dsys.global.dir=D:\usr\sap\J2E\SYS\global
-> arg[ 25]: -Dapplication.home=D:\usr\sap\J2E\JC00\j2ee\os_libs
-> arg[ 26]: -Djava.class.path=D:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_18\jre\bin\server;C:\j2sdk1.4.2_18\jre\bin;C:\j2sdk1.4.2_18\bin;D:\usr\sap\J2E\JC00\j2ee\os_libs;D:\Oracle\Ofs33\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC00\exe;D:\usr\sap\J2E\SYS\exe\run
-> arg[ 28]: -Xdebug
-> arg[ 29]: -Xnoagent
-> arg[ 30]: -Djava.compiler=NONE
-> arg[ 31]: -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=50021
-> arg[ 32]: -Dmemory.manager=1024M
-> arg[ 33]: -Xmx1024M
-> arg[ 34]: -Xms256M
-> arg[ 35]: -DLoadBalanceRestricted=yes
-> arg[ 36]: -Djstartup.mode=JCONTROL
-> arg[ 37]: -Djstartup.ownProcessId=5496
-> arg[ 38]: -Djstartup.ownHardwareId=V0317565360
-> arg[ 39]: -Djstartup.whoami=server
-> arg[ 40]: -Djstartup.debuggable=yes
-> arg[ 41]: -DSAPINFO=J2E_00_server
-> arg[ 42]: -DSAPSTARTUP=1
-> arg[ 43]: -DSAPSYSTEM=00
-> arg[ 44]: -DSAPSYSTEMNAME=J2E
-> arg[ 45]: -DSAPMYNAME=K-0017553_J2E_00
-> arg[ 46]: -DSAPDBHOST=
-> arg[ 47]: -Dj2ee.dbhost=K-0017553
[Thr 3648] JLaunchIAbortJava: abort hook is called
[Thr 3648] JLaunchCloseProgram: good bye (exitcode=-2)

Dear Netweaver experts,
I found the solution.
I took for my system (Win XP, 2,5 GB RAM) the settings posted below :
Maximum heap size : 512 MB
-Djava.security.policy=./java.policy
-Djava.security.egd=file:/dev/urandom
-Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-Djco.jarm=1
-Dsun.io.useCanonCaches=false
-XX:NewSize=170m
-XX:MaxNewSize=170m
-XX:MaxPermSize=192m
-Djava.awt.headless=true
-XX:PermSize=192m
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-XX:SoftRefLRUPolicyMSPerMB=1
-Xms512m
-verbose:gc
-XX:+DisableExplicitGC
Best regards,
Daniel
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-XX:+UseParNewGC

Problem installing StorADE 2.4 in Oracle Java Web Console 3.1 with CAM 6.6.

Hi Guys,
I am having problem installing StorADE 2.4 in Oracle Java Web Console 3.1 with CAM 6.6.
I am sure I have seen them together in Web Console but doesn't seems to be working... I am getting all sort of javv exception errors...
Also the installation of StorADE wasn't trivial, I had to create following link for the installation to succeed... and no errors during the installation btw.
- linked /usr/sbin/smcwebserver -> /usr/sadm/bin/smcwebserver
- linked /usr/sbin/smreg -> /usr/sadm/bin/smreg
root # grep -i error /var/sadm/install/Storage_ADE/Install.log
root #
last few logs....
SUNWstadm: Checking the status of the Java Web Console.
SUNWstadm: Stopping the Java Web Console to register.
Shutting down Oracle Java(TM) Web Console Version 3.1 ...
The console is stopped
SUNWstadm: Registering Storage_A.D.E_2.4 with the Java Web Console.
Warning: smreg is obsolete and is preserved only for
compatibility with legacy console applications. Use wcadmin instead.
Type "man wcadmin" or "wcadmin --help" for more information.
Registering Storage_A.D.E_2.4.
SUNWstadm: Enabling the Java Web Console console_debug_log file
to automatically grow and rollover using the default settings.
Warning: smreg is obsolete and is preserved only for
compatibility with legacy console applications. Use wcadmin instead.
Type "man wcadmin" or "wcadmin --help" for more information.
SUNWstadm: Enabling the Java Web Console to startup automatically
during subsequent system boot and gracefully stop during system
shutdown. If you do not want this capability please execute the
following command: /usr/sadm/bin/smcwebserver disable
SUNWstadm: Starting the Java Web Console after registration.
Starting Oracle Java(TM) Web Console Version 3.1 ...
The console is running
To complete the configuration, point your browser to:
https://<hostname>:6789
Please refer to the SUNWstadm release notes for additional
installation, configuration, and usage information.
Installation of <SUNWstadm> was successful.
SUNWstazt is already installed
SUNWstazh is already installed
SUNWstako is already installed
SUNWstaja is already installed
SUNWstafr is already installed
Installation successful
| You have installed the following: |
| |
| o Storage A.D.E. 2.4 - Enterprise Edition - Success |
| o Storage A.D.E. 2.4 - Management Station UI - Success |
| |
| The UI can be accessed at the URL : https://<hostname>:6789/ |
Finished at: Friday, 20 August 2010 11:14:55 AM EST
Note: A log has been saved to: /var/sadm/install/Storage_ADE/Install.log
Any pointers will be appreciated....
Thanks,
Nitin

Hi Guys,
I am having problem installing StorADE 2.4 in Oracle Java Web Console 3.1 with CAM 6.6.
I am sure I have seen them together in Web Console but doesn't seems to be working... I am getting all sort of javv exception errors...
Also the installation of StorADE wasn't trivial, I had to create following link for the installation to succeed... and no errors during the installation btw.
- linked /usr/sbin/smcwebserver -> /usr/sadm/bin/smcwebserver
- linked /usr/sbin/smreg -> /usr/sadm/bin/smreg
root # grep -i error /var/sadm/install/Storage_ADE/Install.log
root #
last few logs....
SUNWstadm: Checking the status of the Java Web Console.
SUNWstadm: Stopping the Java Web Console to register.
Shutting down Oracle Java(TM) Web Console Version 3.1 ...
The console is stopped
SUNWstadm: Registering Storage_A.D.E_2.4 with the Java Web Console.
Warning: smreg is obsolete and is preserved only for
compatibility with legacy console applications. Use wcadmin instead.
Type "man wcadmin" or "wcadmin --help" for more information.
Registering Storage_A.D.E_2.4.
SUNWstadm: Enabling the Java Web Console console_debug_log file
to automatically grow and rollover using the default settings.
Warning: smreg is obsolete and is preserved only for
compatibility with legacy console applications. Use wcadmin instead.
Type "man wcadmin" or "wcadmin --help" for more information.
SUNWstadm: Enabling the Java Web Console to startup automatically
during subsequent system boot and gracefully stop during system
shutdown. If you do not want this capability please execute the
following command: /usr/sadm/bin/smcwebserver disable
SUNWstadm: Starting the Java Web Console after registration.
Starting Oracle Java(TM) Web Console Version 3.1 ...
The console is running
To complete the configuration, point your browser to:
https://<hostname>:6789
Please refer to the SUNWstadm release notes for additional
installation, configuration, and usage information.
Installation of <SUNWstadm> was successful.
SUNWstazt is already installed
SUNWstazh is already installed
SUNWstako is already installed
SUNWstaja is already installed
SUNWstafr is already installed
Installation successful
| You have installed the following: |
| |
| o Storage A.D.E. 2.4 - Enterprise Edition - Success |
| o Storage A.D.E. 2.4 - Management Station UI - Success |
| |
| The UI can be accessed at the URL : https://<hostname>:6789/ |
Finished at: Friday, 20 August 2010 11:14:55 AM EST
Note: A log has been saved to: /var/sadm/install/Storage_ADE/Install.log
Any pointers will be appreciated....
Thanks,
Nitin

Error Deploying DictionaryProject to NetWeaver 7.0 SR2 ABAP-Java-Trial

Hi,
I built a simple DictionaryProject with Netweaver Developer Studio. Only one table with an ID-KeyColumn.
But deployment to NetWeaver 7.0 SR2 ABAP-Java-Trial-VMWare failed with following error:
Feb 11, 2008 11:43:30... Info: E R R O R ******* (DbColumns)
Feb 11, 2008 11:43:30... Info: 23:43:30 2008-02-11 dbs-Error: Table BC_DDDBRTH: Error during reading of columns from db
Feb 11, 2008 11:43:30... Info: E R R O R ******* (DbColumns)
Feb 11, 2008 11:43:30... Info: 23:43:30 2008-02-11 dbs-Error: Caused by: DB2 SQL error: SQLCODE: -443, SQLSTATE: 38553, SQLERRMC: SYSIBM.SQLCOLUMNS;COLUMNS;SYSIBM:CLI:-805 Stack trace: com.ibm.db2.jcc.a.SqlException: DB2 SQL error: SQLCODE: -443, SQLSTATE: 38553, SQLERRMC: SYSIBM.SQLCOLUMNS;COLUMNS;SYSIBM:CLI:-805
The trial is runnign DB2 on SLES
Thank you,
Josh

Hi Josh,
please apply note 823019 .You need to logon as user db2<sid> and run:
cd sqllib/bnd # UNIX
db2 connect to <sid>
db2 bind db2schema.bnd blocking all grant public sqlerror continue
Regards
Frank

Problem installing Netweaver 2004s EPC and EP on Windows MSSQL env

Hi,
I am attempting to install Netweaver 2004s EPC and EP in Java on Windows 2003 with MSS 2005 DB.
On phase "DB downtime configuration" "Changing location of tempdb files", we see the below error message.
FCO-00011 The step doTempDBBeforeRestart with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0|doTempDBBeforeRestart was executed with status ERROR .
I was unable to find anything is OSS notes or SDN that addresses this particular issue.
Your help is greatly appreciated.
Regards,
Rick Taylor

long story short:
xp (specially NOT the home version) is not among the supported operating systems to run any sap system...use either windows 2000 server or 2003 server
GreetZ, AH

Problem Installing the loaded applet in Samsung java card (S3CC9P9).

Hi all,
Am trying to install the applets already loaded into the Samsung java card(S3CC9P9), because am unable to select the applet which are loaded into the card. I got to know that the applets are only loaded, they are not installed in the card, without installing the applet ,we cannot select the applet. Am using gpj(version 20120310 ) to install the applets into the card.
When i execute : java -jar gpj.jar -list
i get the list of applets in the card as :
AID: A0 00 00 00 03 00 00 00 |........| ISD LC: 1 PR: 0x1A
AID: A0 00 00 00 03 10 |......| Exe LC: 1 PR: 0x00
AID: D4 10 65 09 90 00 10 00 |..e.....| Exe LC: 1 PR: 0x00
AID: 31 50 41 59 2E |1PAY.| Exe LC: 1 PR: 0x00
AID: D4 10 65 09 90 00 30 00 |..e...0.| Exe LC: 1 PR: 0x00
AID: D4 10 65 09 90 00 20 00 |..e... .| Exe LC: 1 PR: 0x00
Here am able to select only the first applet i.e., A0 00 00 00 03 00 00 00
SO, when i try to install the other applets, for example A0 00 00 00 03 10, its fails.
When i execute : java -jar gpj.jar -install -applet A00000000310
i get :
Found terminals: [PC/SC terminal ACS ACR38U 00 00]
Found card in terminal: ACS ACR38U 00 00
ATR: 3B 69 00 00 80 63 31 46 DF 83 FF 90 00
DEBUG: Command APDU: 00 A4 04 00 07 A0 00 00 01 51 00 00
DEBUG: Response APDU: 6A 82
Failed to select Security Domain GP211 A0 00 00 01 51 00 00 , SW: 6A 82
DEBUG: Command APDU: 00 A4 04 00 08 A0 00 00 00 18 43 4D 00
DEBUG: Response APDU: 6A 82
Failed to select Security Domain GemaltoXpressPro A0 00 00 00 18 43 4D 00 , SW: 6A 82
DEBUG: Command APDU: 00 A4 04 00 08 A0 00 00 00 03 00 00 00
DEBUG: Response APDU: 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E 06 10 01 76 DE 00 05 9F 65 01 7F 90 00
Successfully selected Security Domain OP201a A0 00 00 00 03 00 00 00
DEBUG: Command APDU: 80 50 00 00 08 AE 2A B8 CE 3A BB E0 B0
DEBUG: Response APDU: 00 00 61 41 01 09 38 2F 09 5A FF 01 3F D9 93 D9 FE 9A FA 3B E4 B7 21 89 6A 34 AB 18 90 00
DEBUG: Command APDU: 84 82 00 00 10 A2 63 07 96 0B D8 A3 A9 93 A2 5C 7C 6D B7 E0 54
DEBUG: Response APDU: 90 00
DEBUG: Command APDU: 84 82 00 00 08 A2 63 07 96 0B D8 A3 A9
DEBUG: Response APDU: 90 00
java.lang.NullPointerException
at net.sourceforge.gpj.cardservices.GlobalPlatformService.installAndMakeSelecatable(Unknown Source)
at net.sourceforge.gpj.cardservices.GlobalPlatformService.main(Unknown Source)
Can anyone please tell me where am wrong and how to make the applets selectable.
Thanks in advance

hy
1. do you have a reader with a serial (com1) connection?
if so, the reader has to be connected before starting windows. so windows recognizes it.
2. have a look to the control panel. is there a tool - installed during driver installation - to test and configure the reader?
if so try it.
if all that works, the jcop tools communicate with the reader over the installed driver.
snoopy

Problem installing netweaver

Hi,
I am trying to install the netweaver but I got this error:
ERROR 2006-03-17 17:23:03
MOS-01228 User 'yisbcn01\SAPServiceBW3' is not registered from the operating system. The UID cannot be retrieved.
ERROR 2006-03-17 17:23:03
MOS-01224 Unable to add privileges 'SeServiceLogonRight SeNetworkLogonRight SeDenyInteractiveLogonRight' to account 'yisbcn01\SAPServiceBW3' on host 'yisbcn01'.
Can anyone help me please? :o)

Hi Laura,
Is this installation being done on the domain controller?
From the installation guides you can see the following section:
"Caution, you cannot create local users and groups on the host that is used as domain controller. Therefore, we do not support running an SAP instance(including the database instance) on the host where the DNS service is installed. "
I have come across one case where this was the cause of these same errors.
Regards, Mark

Problems Installing Netweaver Developer Studio 7.0 SP 15

Hello friends,
I have currently NWDS 7.0 SP9 installed. I need to install NWDS 7.0 SP15. For that I have downloaded the JIDE15_0-10003480.SAR file from Service Market place. I don't know what to do after that.
Please can anyone help me on this.
Points guaranteed.
Thank You
Avik

Hi,
SAPCAR is a executable. you can find it in \usr\sap\<SID>SYS\exe\run.
You can execute the "sapcar -xvf <filename>.car"
Note:
Using JSPM we can deploy the sar file.
For JSPM , no need to uncar the file. It will directly uncar and deploy it.
Try with JSPM to deploy the SAR file.
Regards,
Bala.

Always failed during operating system checking while installing NetWeaver.

I have installed NetWeaver Composition Envrionment Sneak Preview - Java EE only but always failed during operating system checking. Does this version not support Window XP Professional SP2? This is mostly used window system.

I checked the instruction and comfirmed that it does support Window XP Professional (SP2):
System Requirements
<b>Windows XP Professional (Service Pack 2)</b> or Windows 2003 Server (Service Pack 1)
<b>This version runs on Windows XP (SP2)</b> with password accounts and Windows Server 2003 (32bit)
NTFS file system
Micrsoft Internet Explorer 6.0 or higher, or Firefox 1.0 or higher
Min. 1 GB, recommended 2 GB RAM
7 GB free hard disc space
Download file 1.8 GB
1.5 GHz PC or higher
Monitor 1024x768 pixels or more, 256 colors
Internet access (for CE online documentation)
If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
To use SAP Interactive Forms by Adobe, you must install the necessary credential file and activate it using a unique password. Download the latest credential and passwort from SDN

SAP NetWeaver 7.0 Java Trial Version (90 Days or 30 Days?)

Hi Experts,
I downloaded the SAP NetWeaver 7.0 (2004s) for Java trial verion through the SAP Market Service almost a month ago, but I only have 6 days left until expiry. I thought I was good for 90 days or I have to renew it every 30 days? Please suggest me what should I do, and I greatly appreciate your responses.
Regards,
-Napadol

Hi,
You have ask sap for permanent license.
For that you have to register your system with sap.
But it will cost you more for your company for licensing.
If you are home user then it will huge money appr. in Lakhs.
You can contact to sap for license or write a mail for the same.
mail - services2sap.com
Reward point if answer solve your issue.
Regards,
Rohit Mehta

NW2004s SP9 Java Trial - "Could not create mountpoint for SC in ..."

Hi
I have installed the Sneak Preview NW2004s SP9 Java Trial on a W2003 Server Macheine and everything is looking fine.
When trying the Tutorial 2: Development with a Track it cames to the point where i have to Import a Development Configuration from the SLD. I get the error:
Could not create mountpoint for SC in compartment chynet.at_APPLICATION_1: Could not create remote path /dtr/ws/APPL/chynet.at_APPLICATION/dev/inactive/SCs/chynet.at/APPLICATION/_comp/TopLevelDCs/ (Internal Server Error [(pre||post)-condition failed: Internal Server Error]).
     at com.sap.tc.devconf.impl.DTRClientErrorMapper.toSyncException(DTRClientErrorMapper.java:65)
     at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2758)
     at com.sap.tc.devconf.impl.DevelopmentConfiguration.createMountPointsForSCs(DevelopmentConfiguration.java:3046)
     at com.sap.tc.devconf.impl.DevelopmentConfiguration.goOnline(DevelopmentConfiguration.java:5207)
     at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:773)
     at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:698)
     at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:669)
     at com.sap.ide.eclipse.component.wizard.DevConfWizard.addDevConf(DevConfWizard.java:505)
     at com.sap.ide.eclipse.component.wizard.DevConfWizard.access$100(DevConfWizard.java:67)
Can anybody tell me what is going wrong or where i can investigate the error?
LG
Michael

Hi There !
Run SDM RemoteGui.
Log in.
Go to deployment tab.
Find sap.comtcdtr~dbschema.sda in root directory under SDM.
Adjust deployment configuration to Update deployed SDAs/SCAs that have any version.
Complete the wizard.
this works !
rajendra

Error while installing SAP Netweaver 7.1 CE Java Trial - MaxDB problem

Hi All,
I am getting following error while installing SAP Netweaver 7.1 CE Java Trial.
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n psi-001 -d CE1 -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20080509161037
> Subprocess call failed
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
no_id_provided_by_rte,no_text_provided_by_rte
> Subprocess starts at 20080509164614
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n psi-001 -d CE1 -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20080509164614
> Subprocess call failed
ERR
-24783,ERR_WRONGDBSTATE: Operational state UNDEFINED of the database instance is unsuitable.
-24782,ERR_DBSTATENEEDED1: Database instance must be in operational state OFFLINE.
> Subprocess starts at 20080509164943
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n psi-001 -d CE1 -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20080509164944
> Subprocess call failed
ERR
-24783,ERR_WRONGDBSTATE: Operational state UNDEFINED of the database instance is unsuitable.
-24782,ERR_DBSTATENEEDED1: Database instance must be in operational state OFFLINE.
Thanks,
Alpesh

Hello Alpesh,
Please see the thread Max-DB cannot determine current db state (NW2004s install)
were the same issue was reported.
Thank you & best regards, Natalia Khlopina

SAP NetWeaver 2004s Java Trial Version installation problem

I am trying to install SAP NetWeaver 2004s Java Trial Version in my windows xp machine.
I have the following error.
Nothing is written in to my E:\usr\sap folder which I have share as saploc and sapmnt.
I read the forum threads on this.
I still do not know how to do this.
Please help
vijay
INFO 2006-12-17 21:23:58
Execute step getSID of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2006-12-17 21:24:01
FJS-00003 TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39640: ???)
ERROR 2006-12-17 21:24:01
MUT-03025 Caught ESAPinstException in Modulecall: executing JS script failed.
ERROR 2006-12-17 21:24:01
FCO-00011 The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .

Rajat,
Sorry for the delay. I was on vacation.
Which environment variable are you referring to?
JAVA_HOME is set to C:\j2sdk1.4.2_09.
I am using j2sdk1.4.2_09.
Only port changes I tried was
#sapdp01 3201/tcp.
I tried with and without the # .
Both had the same results.
I have given below the last few statememts from the sapinst log file
Any help to solve my problem will be greatly appreciated.
Thanks.
Vijay
INFO 2007-01-02 16:13:25
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/VIJAYV1/LOCALS1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: ##Tue Jan 02 16:13:25 PST 2007java.runtime.name=Java(TM) 2 Runtime Environment, Standard Editionsun.boot.library.path=C\:
j2sdk1.4.2_09
jre
binjava.vm.version=1.4.2_09-b05java.vm.vendor=Sun Microsystems Inc.java.vendor.url=http\://java.sun.com/path.separator=;java.vm.name=Java HotSpot(TM) Client VMfile.encoding.pkg=sun.iouser.country=USsun.os.patch.level=Service Pack 2java.vm.specification.name=Java Virtual Machine Specificationuser.dir=C\:
Program Files
sapinst_instdir
NW04S
SNEAK_PREVIEW
FULL
INSTALLjava.runtime.version=1.4.2_09-b05java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironmentjava.endorsed.dirs=C\:
j2sdk1.4.2_09
jre
lib
endorsedos.arch=x86java.io.tmpdir=C\:
DOCUME1
VIJAYV1
LOCALS1
Temp
line.separator=\r\njava.vm.specification.vendor=Sun Microsystems Inc.user.variant=os.name=Windows XPsun.java2d.fontpath=java.library.path=C\:
j2sdk1.4.2_09
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;e\:
sapdb
programs
bin;e\:
sapdb
programs
pgm;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
classic;f\:
oracle
product
10gDSHome
jdk
jre
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
client;f\:
oracle
product
10gDSHome
jlib;f\:
oracle
product
10gDSHome
bin;f\:
oracle
product
10gDSHome
jre
1.1.8
bin;f\:
oracle
product
10.1.0
Db_1
bin;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin
client;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
Program Files
Microsoft SQL Server
80
Tools
BINN;C\:
Program Files
Microsoft SQL Server
80
Tools
Binn
;C\:
WINDOWS
Microsoft.NET
Framework
v1.1.4322;F\:
maven
Maven 1.0
bin;C\:
Program Files
QuickTime
QTSystem
;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;java.specification.name=Java Platform API Specificationjava.class.version=48.0java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactoryos.version=5.1user.home=C\:
Documents and Settings
vijay vijayakumaruser.timezone=America/Los_Angelesjava.awt.printerjob=sun.awt.windows.WPrinterJobfile.encoding=Cp1252java.specification.version=1.4java.class.path=C\:/DOCUME1/VIJAYV1/LOCALS~1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jaruser.name=vijay vijayakumarjava.vm.specification.version=1.0java.home=C\:
j2sdk1.4.2_09
jresun.arch.data.model=32user.language=enjava.specification.vendor=Sun Microsystems Inc.awt.toolkit=sun.awt.windows.WToolkitjava.vm.info=mixed modejava.version=1.4.2_09java.ext.dirs=C\:
j2sdk1.4.2_09
jre
lib
extsun.boot.class.path=C\:
j2sdk1.4.2_09
jre
lib
rt.jar;C\:
j2sdk1.4.2_09
jre
lib
i18n.jar;C\:
j2sdk1.4.2_09
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_09
jre
lib
jsse.jar;C\:
j2sdk1.4.2_09
jre
lib
jce.jar;C\:
j2sdk1.4.2_09
jre
lib
charsets.jar;C\:
j2sdk1.4.2_09
jre
classesjava.vendor=Sun Microsystems Inc.file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgisun.io.unicode.encoding=UnicodeLittlesun.cpu.endian=littlesun.cpu.isalist=pentium i486 i386
INFO 2007-01-02 16:13:25
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-01-02 16:13:26
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-01-02 16:13:28
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-02 16:13:29
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .

Problems installing SAP NetWeaver 2004 trial version from book DVD

Hi
I'm trying to install netweaver trial version from the dvd in Horst Keller's book ABAP Objects but am having problems. I have tried to uninstall and start again but I keep getting the message below. Any suggestions welcome as I'm new to all this.
(Apr 1, 2008 11:59:57 AM), Install, com.installshield.product.actions.DeleteDirectory, err, An error occurred and product installation failed. Look at the log file D:\SAP\NSP\log.txt for details.
(Apr 1, 2008 11:59:57 AM), Install, com.installshield.product.actions.DeleteDirectory, err, ProductException: (error code = 601; message="err"; additional data = [Unable to delete D:\SAP\NSP\_installTemp : ServiceException: (error code = -30020; message = "The directory is not empty.
(145)"; severity = 0)])
STACK_TRACE: 14
ProductException: (error code = 601; message="err"; additional data = [Unable to delete D:\SAP\NSP\_installTemp : ServiceException: (error code = -30020; message = "The directory is not empty.
(145)"; severity = 0)])
     at com.installshield.product.actions.DeleteDirectory.deleteDirectory(Unknown Source)
     at com.installshield.product.actions.DeleteDirectory.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hello Sharon,
I don't know this book you've mentioned, but perhaps it's the same trail version as you can download from SAP.
To uninstall it please go through the steps provided in the first part of the following site --> link
Then try to delete the D:SAPNSP-folder again.
Also please check your services-file under C:WINDOWSsystem32driversetc that there aren't any entries like NSP left.
Regards,
Norman Schröder

Machine Specs for installing SAP NetWeaver 7.0 - Java Trial version.

Hi,
can we install SAP NetWeaver 7.0 - Java Trial on windows x64 OS/machine or all the trail versions work only on 32 bit OS/machine?
I tried installing SAP NetWeaver 7.0 - Java Trial it on my laptop (Win XP 32 bit) and on a Server (Win 2003 server x64 bit), it failed.
Is SAP NetWeaver 7.0 - Java Trial version specifies any particular configuration on which it will work perfectly fine without any issues?
your help would be highly appreaciated.
thanks,

Only work with 32bits
SAP NetWeaver 7.0 Java Trial Version System Requirements
      Operating System: Windows 2000 (Service Pack 3); Windows XP Professional (Service Pack 1) or Windows Server 2003
      NTFS-File systems
      Internet Explorer 5.5 or higher or Firefox 1.0 or higher
      At least 1 GB RAM, 2 GB are recommended
      Intel Pentium III/1.1 GHz or higher (or compatible)
      14GB free hard disk space (8.6 GB for the installed software and 4.9 GB for the installer software)
      High-resolution monitor (1024x768 or higher, 256 colors)
      Sun Microsystems J2SE SDK version 1.4.2_XX or 1.4.2_XX (Sun JDK 1.5 not tested). You can download this from Sun Microsystems at http://java.sun.com/products/archive/j2se/1.4.2_XX/index.html. Please note that version 1.4.2_10 may cause installation problems.
      If you have already installed SAP products on your computer, you must ensure that none of the systems are called "J2E".
      The file C:\WINNT\system32\drivers\etc\services (Windows 2000) or C:\Windows\system32\drivers\etc\services (Windows XP) must not include an entry for the ports 3601, 3201 and 50000 to 50030. A possible entry can be excluded by using the hash symbol (#).
      If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. This is described in detail within the contents of the download package.
      To use SAP Interactive Forms by Adobe, you must install the necessary credential file and activatetial file and activate it using a unique password. Download the latest credential and password from SDN.
check the points if i help you

Problem Install NetWeaver CE 7.1,SP1 , Java Trial

Similar Messages

Maybe you are looking for