Problems Installing Netweaver Developer Studio 7.0 SP 15

Hello friends,
I have currently NWDS 7.0 SP9 installed. I need to install NWDS 7.0 SP15. For that I have downloaded the JIDE15_0-10003480.SAR file from Service Market place. I don't know what to do after that.
Please can anyone help me on this.
Points guaranteed.
Thank You
Avik

Hi,
SAPCAR is a executable. you can find it in \usr\sap\<SID>SYS\exe\run.
You can execute the "sapcar -xvf <filename>.car"
Note:
Using JSPM we can deploy the sar file.
For JSPM , no need to uncar the file. It will directly uncar and deploy it.
Try with JSPM to deploy the SAR file.
Regards,
Bala.

Similar Messages

Installing Netweaver Developer Studio 7.1

Hi All
I have installed Netweaver Developer studio 7.1 (NWDS_platform) but when it is done it does give me most important features. I am not able to create any project like EJB and EAP projects and on the Window -> Preferences I can't fine JAVA and some other options.
Below are the only opotion I have on my Windon-> Preferences:
-General
-Help
-Install/Update
-Run/Debug
-Team
What must I do to get those other options

Hi
Thanks a lot for a quick reply I have tried to install the updates from these two sites.
--https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/site.xml
--https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/policy.xml
This is an error I m getting.
"No features found on the selected site(s) choose the diferent site or site category"
One question do i have to install the Sap Netweaver CE7.1_SR3... to run this Developer Studio coz I just downlaoded the Dev Studio 7.1 and I am running it on my machine. but I am using JDK 6 not 5 will that be a problem.
Yonela

WebDynpro for beginners - Installing Netweaver Developer Studio

Hi,
I am new SAP technology and I want to start with WebDynpro for JAVA. I have basics in Java and don't know anything about SAP, ABAP etc.
I was going through webdynpro tutorials and It is mentioned that to develop applications we need to install Netweaver Developer Studio. But I am not able to locate it in the portal, SDN.
If anybody can let me know how can I install, it will be of great help.
Also Please let me know, a better way to start with WebDynpro.
Thanks a lot,
Anand

Hi Anand,
Go through this link to downlaod the NWDS.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloads">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloads</a>
and to know more about the Webdynpro check the following link:
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm</a>
Regards,
Jhansi

Problems installing Netweaver Developer Workplace 2004

Dear Netweaver experts,
I have severe problems installing Netweaver Developer Workplace 2004 on windows XP.
I used sapinst for installing the Java sytem (Menue Java System->Oracle->Custom Installation).
After running through 34 of the 35 phases during which the sapinst tries to start the freshly installed J2EE engine I got the error :
CJSlibModule::writeError_impl() CJS-20057 Starting J2EE Engine J00 of SAP system J2E failed: after 84 s the state of the engine changed from "Starting" to "Stopped".
and changed my memory setting using the configtool.
Afterwards I tried to start the server in my MMC and it seemed to be running.
INFO
Execution of the command "D:\usr\sap\J2E\JC00\exe/startsap.exe 'name=J2E' 'nr=00' 'SAPDIAHOST=K-0017553'" finished with return code 0. Output: STARTSAP continues...
But when I had a closer look at the Process table at the MMC I saw that the server0 wasn't running
(Server 0 stopped Exit Code -2).
Now I don't know how to proceed.
Does someone of you know how I could get my J2EE server running ?
Below you find my present settings :
trc file: "D:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
node name   : ID3806050
pid         : 5496
system name : J2E
system nr. : 00
started at : Tue Dec 02 11:16:19 2008
arguments   :
    arg[00] : D:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
    arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC00_K-0017553
    arg[02] : -DSAPINFO=J2E_00_server
    arg[03] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC00_K-0017553
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
-> ms host    : K-0017553
-> ms port    : 3601
-> OS libs    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : K-0017553
-> ms port    : 3601
-> os libs    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID3806000 : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID3806050 : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID3806000            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] ID3806050            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
[Thr 5312] Tue Dec 02 11:16:19 2008
[Thr 5312] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5312] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4100] JLaunchRequestFunc: Thread 4100 started as listener thread for np messages.
[Thr 3328] WaitSyncSemThread: Thread 3328 started as semaphore monitor thread.
[Thr 5312] Tue Dec 02 11:16:20 2008
[Thr 5312] INFO: Invalid property value [JLaunchParameters/]
[Thr 5312] JStartupIReadSection: debug mode is specified by program arguments
[Thr 5312] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_18
JStartupIReadSection: read node properties [ID3806050]
-> node name       : server0
-> node type       : server
-> java path       : C:\j2sdk1.4.2_18
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -Djava.awt.headless=true -XX:PermSize=192m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:DisableExplicitGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:UseParNewGC -Drdbms.driverLocation=D:/Oracle/Ofs33/jdbc/lib/classes12.jar -Dsys.global.dir=D:/usr/sap/J2E/SYS/global/
-> java vm version : 1.4.2_18-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type    : server
-> java vm cpu     : x86
-> heap size       : 1024M
-> init heap size : 256M
-> root path       : D:\usr\sap\J2E\JC00\j2ee\cluster\server0
-> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class      : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters      :
-> debuggable      : yes
-> debug mode      : yes
-> debug port      : 50021
-> shutdown timeout: 120000
[Thr 5312] JLaunchISetDebugMode: set debug mode [yes]
[Thr 3648] JLaunchIStartFunc: Thread 3648 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack   : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: -Djava.security.policy=./java.policy
-> arg[ 3]: -Djava.security.egd=file:/dev/urandom
-> arg[ 4]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 5]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 6]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 7]: -Djco.jarm=1
-> arg[ 8]: -Dsun.io.useCanonCaches=false
-> arg[ 9]: -XX:NewSize=170m
-> arg[ 10]: -XX:MaxNewSize=170m
-> arg[ 11]: -XX:MaxPermSize=192m
-> arg[ 12]: -Djava.awt.headless=true
-> arg[ 13]: -XX:PermSize=192m
-> arg[ 14]: -XX:SurvivorRatio=2
-> arg[ 15]: -XX:TargetSurvivorRatio=90
-> arg[ 16]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 17]: -verbose:gc
-> arg[ 18]: -XX:+DisableExplicitGC
-> arg[ 19]: -XX:+PrintGCDetails
-> arg[ 20]: -XX:+PrintGCTimeStamps
-> arg[ 21]: -XX:+UseParNewGC
-> arg[ 22]: -Drdbms.driverLocation=D:/Oracle/Ofs33/jdbc/lib/classes12.jar
-> arg[ 23]: -Dsys.global.dir=D:/usr/sap/J2E/SYS/global/
-> arg[ 24]: -Dsys.global.dir=D:\usr\sap\J2E\SYS\global
-> arg[ 25]: -Dapplication.home=D:\usr\sap\J2E\JC00\j2ee\os_libs
-> arg[ 26]: -Djava.class.path=D:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_18\jre\bin\server;C:\j2sdk1.4.2_18\jre\bin;C:\j2sdk1.4.2_18\bin;D:\usr\sap\J2E\JC00\j2ee\os_libs;D:\Oracle\Ofs33\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC00\exe;D:\usr\sap\J2E\SYS\exe\run
-> arg[ 28]: -Xdebug
-> arg[ 29]: -Xnoagent
-> arg[ 30]: -Djava.compiler=NONE
-> arg[ 31]: -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=50021
-> arg[ 32]: -Dmemory.manager=1024M
-> arg[ 33]: -Xmx1024M
-> arg[ 34]: -Xms256M
-> arg[ 35]: -DLoadBalanceRestricted=yes
-> arg[ 36]: -Djstartup.mode=JCONTROL
-> arg[ 37]: -Djstartup.ownProcessId=5496
-> arg[ 38]: -Djstartup.ownHardwareId=V0317565360
-> arg[ 39]: -Djstartup.whoami=server
-> arg[ 40]: -Djstartup.debuggable=yes
-> arg[ 41]: -DSAPINFO=J2E_00_server
-> arg[ 42]: -DSAPSTARTUP=1
-> arg[ 43]: -DSAPSYSTEM=00
-> arg[ 44]: -DSAPSYSTEMNAME=J2E
-> arg[ 45]: -DSAPMYNAME=K-0017553_J2E_00
-> arg[ 46]: -DSAPDBHOST=
-> arg[ 47]: -Dj2ee.dbhost=K-0017553
[Thr 3648] JLaunchIAbortJava: abort hook is called
[Thr 3648] JLaunchCloseProgram: good bye (exitcode=-2)

Dear Netweaver experts,
I found the solution.
I took for my system (Win XP, 2,5 GB RAM) the settings posted below :
Maximum heap size : 512 MB
-Djava.security.policy=./java.policy
-Djava.security.egd=file:/dev/urandom
-Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-Djco.jarm=1
-Dsun.io.useCanonCaches=false
-XX:NewSize=170m
-XX:MaxNewSize=170m
-XX:MaxPermSize=192m
-Djava.awt.headless=true
-XX:PermSize=192m
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-XX:SoftRefLRUPolicyMSPerMB=1
-Xms512m
-verbose:gc
-XX:+DisableExplicitGC
Best regards,
Daniel
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-XX:+UseParNewGC

Error when installing NetWeaver Developer Studio 7

Hi,
I am having problems installing the NetWeaver Developer Studio 7.0.0. which comes bundled with the SAP NetWeaver 7.0 - Trial Version on Linux. To initiate installation, i double-clicked on the IDE70Setup file located in the client/IDE folder. I filled in the options presented by the wizard and installation proceeded. However halfway it terminated abruptly, and displayed an error message as shown below:
Missing file: 'C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.java.ide_7.0.0\plugin_customization.ini'.
Has anybody who encountered this problem before help me out? Any help would be greatly appreciated. Thanks!

Hi
Thanks a lot for a quick reply I have tried to install the updates from these two sites.
--https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/site.xml
--https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/policy.xml
This is an error I m getting.
"No features found on the selected site(s) choose the diferent site or site category"
One question do i have to install the Sap Netweaver CE7.1_SR3... to run this Developer Studio coz I just downlaoded the Dev Studio 7.1 and I am running it on my machine. but I am using JDK 6 not 5 will that be a problem.
Yonela

Install Netweaver Developer Studio

How and where would I download SAP Netweaver Developer Studio? I went to the service marketplace, but I can only find Service Packs there.....

You can have the NWDS @ service.sap.com/swdc--->>Entry by application group -->
SAP NETWEAVER >SAP NETWEAVER 7.0> Entry by Component -->Developer Studio
NW DEVELOPER STUDIO 7.00
Thank you,
Shyam

Problem with NetWeaver Developer Studio

I have NetWeaver Dev Studio 2.0.9 installed. I have JDK version 1.4.2_11 also. The environment variables are all set properly.
I can create a new Java project without problem, but any time I try to create a new "Portal Project", I get a "Invalid Project Description" error. I also get this same error when I try to import a .par file. The project paths are named differently from the file names, etc.
I have uninstalled all JDKs, JREs, etc, and uninstalled Netweaver and reinstalled everything, to no avail.
Any assistance in this matter would be most appreciated.
thank you,
K.

Hi
To solve your problem you need to copy all your workspace contents to some other place .
Uninstall your NWDS & Delete all the previous Workspace.
Reinstall NWDS & it will work fine .
All The Best
Priyanka
Do reward Points.

Problem with netweaver developer studio for sp9

Hi,
Presenty we are on ep6 sp10 and we have downloaded dev studio for sp9 which is available on sdn.we have j2sdk1.4.2_06
the problem is that when i deploy a par file from netweaver and try to create an iview based on that par it gives me the following error
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com.sapportals.portal.navigation.ToolAreaiView.
Exception id: 04:25_03/03/05_0005_4061050
See the details for the exception ID in the log file
The strange thing is that if i use ep6 sp2 dev studio it works fine. So is there any problem with sp9 dev studio?

I think that with NWDS the SP of the portal and NWDS much match.
Hope it helps,
Patrick.

Problem in creating a web dynpro application in netweaver developer studio.

Hi,
I have installed Netweaver developer studio. while creating a webdynpro project by selecting File->new->project, It doesn't display "web dynpro" option in the project wizard dailogue box.
Please suggest how to resolve this issue.
Thanks.

Hi Babu,
Make sure following plugin folder
"com.sap.ide.webdynpro.ui_xx.yy.zz(for ex:com.sap.ide.webdynpro.ui_2.0.0)"
exists in your ecclipse root folder (for ex:C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\)
It is responsible for the UI selection elements in File->New Project->WebDynpro selection.
If it's not there you will have to copy it. check also other webdypro plugins installed correctly. these plugins comes with default installation of SAP WEBAS.
if all plugins not installed then redo the whole installation but at the same time make sure all plugins installed correctly.
reward points if usefull
Thanks
Praveen

Netweaver developer studio(2.0.4) installation problem

I have installed netweaver developer studio 2.0.4.When i tried to open studio it is not opening and following exception is recorded in the log file.
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 16, 2004 11:15:42.942
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.RuntimeException: Could not find bootstrap code. Check location of boot plug-in or specify -boot.
     at org.eclipse.core.launcher.Main.searchForBoot(Main.java:492)
     at org.eclipse.core.launcher.Main.getBootPath(Main.java:438)
     at org.eclipse.core.launcher.Main.basicRun(Main.java:281)
     at org.eclipse.core.launcher.Main.run(Main.java:747)
     at org.eclipse.core.launcher.Main.main(Main.java:583)
Thanks in advance

Wrong forum...try Web AS Preview Installation (even if your version is not preview) or Web AS general.
And check OSS Notes, of course.
Peter

Creation of custom page without using NetWeaver Developer Studio

Hi Experts,
In my project, we have not installed NetWeaver Developer Studio. We are using EP 7.0.
We have to create a custom page for the project. In this page, we have to provide seperate iViews links.
The page should look like this:
iView 1 - Link                iView 2 - Link        iView 1 - Link
Help iView 1-Link        Help iView 1-Link     Help iView1-Link
I tried to do so by creating a page. In the page, I tried to use 'Three Coloumn Page' layout. The iviews are getting displayed in following way:
iView 1 (iView is getting displayed .Link not getting displayed)
Help iView 1 (iView is getting displayed .Link not getting displayed)
iView 2(iView is getting displayed .Link not getting displayed)
I can not display link of all six iViews. Further more iViews are getting displayed in one coloumn and 3 rows. I can see the iViews directly. I am not able to display links for iViews.
I need 3 coloumns and 2 rows layout.
Can you please let me know how to achieve this?
Whether I have to create new layout? For this whether we will need NetWeaver Developer Studio?
Can we do it by creating HTML page. In the HTML page, we will have many links. These links will point to the iViews stored in SAP EP's KM. If so, what be the steps?
I know that it can be done by creating a PAR file and deploying it. But, we don't have Netweaver Developer Studio.
Can we acheive above without using NetWeaver Developer Studio?
Please help me.
Regards,
Brian

Hi Kedar,
Thanks. My requirement is that six iViews links should be shown in the portal content area.
The iViews links should be like
iView 1-Link         iView 2-Link           iView 3-Link
Help iView 1-Link Help iView 2-Link    Help iView3-Link
When user will click on any iView link, the relevant iView should be displayed. The iView can be displayed in seperate new page. So naturally five iView link will not be displayed.
I am planning to create one HTML page and store it in KM. I will call this page in portal content area.
There will be hyperlink on this HTML page. The hyper link will be attached to other iView links in KM.
Whenever user will click on any Help link or iView link the corresponding iView will be called from KM.
So in KM we will store 7 objects. 3 HTMLpages for help. 1 HTML page for main page.
Other 3 will point to iView-Link1, iView-Link2 and iView-Link3.
Can I do so? Will it sort out my problem?
Thanks

Error when launching Netweaver Developer Studio

Hi.
can someone help me. I installed Netweaver Developer studio but when I try to launch it.
I get this error:
"Problem during startup. Check the .log file in the ".metadata" directory of your workspace"
!SESSION Aug 30, 2005 14:50:39.954 -
java.version=1.4.2_06
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide -consolelog -debug C:\j2sdk1.4.2_06\bin\java.exe
-Xmx512m
-Xms128m
-XX:PermSize=32m
-XX:MaxPermSize=128m
-DallUserDir='C:\Documents and Settings\All Users\Application Data'
-cp C:\Program Files\SAP\JDT\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
-os win32
-ws win32
-arch x86
-feature com.sap.java.ide
-showsplash C:\Program Files\SAP\JDT\eclipse\SapIde.exe -showsplash 600
-consolelog
-debug -data C:\NetweaverDevStudio\workspace -install file:C:/Program Files/SAP/JDT/eclipse/
!ENTRY Startup 1 0 Aug 30, 2005 14:50:39.954
!MESSAGE Sap NetWeaver Developer Studio - Build: 200507190119
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Aug 30, 2005 14:50:40.188
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:286)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:795)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:602)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: java.lang.NumberFormatException: For input string: ""
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:489)
     at java.lang.Integer.parseInt(Integer.java:518)
     at com.tssap.config.ProxySettings.parse(ProxySettings.java:184)
     at com.tssap.config.ProxySettings.loadFromPreferences(ProxySettings.java:114)
     at com.tssap.config.Startup.runBeforeWBStartup(Startup.java:39)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:65)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more
Please advise.
thanks
Jennifer

Hi Jennifer,
             This problem is a common one.
1)Make sure that you have Administrator rights in the systems where you are launching NW Studio.
2)Go to your workspace check the log file (basically a text file)
3)Clear your unwanted registry in your registry folder.
If this doesn't work, re-install NW Studio by deleting the older version from Add or Remove Program in control Panel.
Give the Java bin path correctly and devote any folder of your choice to be your workspace.
Hope it helps.
Regards,
Guru.
P.S :- There is no link for launching of NW Studio with Internet Explorer as both are different applications.

Newbie installationproblems NetWeaver Developer Studio

Hello,
I am a newbie and my Problem is to understand the installation_instruction.txt and accordingly to install NetWeaver Developer Studio.
here the installation_instructions.txt:
"How to install the Support Platform
1. Download the attached SP17_Support_Platform_Files.zip and extract it locally.
2. Start SDM on your J2EE installation
3. Deploy the following files (extracted from the SP17_Support_Platform_Files.zip) :
                com.sapportals.supportplatform.dbschema.sda
                com.sapportals.supportplatform.ear
                com.sapportals.supportplatform.engine.sda
                com.sapportals.supportplatform.sda
                sap.comtcsupportplatform~wd.ear
4. Go to the url: http://<hostname>:<50x00>/sp
5. Log in with a user who belongs to the Administrators group.
How to install the NetWeaver Developer Studio plug-in and start developing your own plug-in
1. Unzip the file supportplatform-ide_5_06.zip in your Developer Studio plug-ins dircectory
     The default is: C:\Program Files\SAP\JDT\eclipse\plugins
2. Restart the NetWeaver Developer Studio
3. Navigate to File -> New -> Project... and choose Support Platform -> New Support Platform Plug-in Project"
My questions are:
Where can I start SDM? Is SDM part of J2EE?
What is the sense of that:
"4. Go to the url: http://<hostname>:<50x00>/sp
5. Log in with a user who belongs to the Administrators group."
Perhaps somebody can give me a short introduce or tutorial for that installation and answer my questions.
Thank you for supporting me!

Where can I start SDM? Is SDM part of J2EE?
Yes is part of J2EE server ...
http://help.sap.com/erp2005_ehp_04/helpdata/EN/43/1f1083e7dd2bc5e10000000a114cbd/frameset.htm
Left check how you can start stop using , login remotegui
Regards.

NetWeaver Development Studio and Portal Plugin

Hi
I just installed netWeaver Developer studio 2.0.3. It does not have a portal plugin . I was under the impression that it comes with PDK and Plugin , so that I can develop Java Iviews.
Do I have to install Portal plugin in netWeaver studio to develop Java iviews.
Is there any other version of Developer studio which comes with portal plugin.
What about PDK ?? Does it come with Developer studio 2.0.3.
I had problems before with Eclipse 3.0 and Portal plugin for EP6 SP2. Do I have the same problem with any version of developer studio or If i just install plugin for EP6 i will able to develop java iview.
Any help will be appreciated.
Regards
Bhanu

Hello,
You should update to a later version of the Studio (be careful to check if that version is in sync with your server) In the latest versions the PDK definitely is included.
Regards,
Benny

SDM Config in Netweaver Developer Studio 2.0.5

Hi,
We have EP60 SP2 running on J2EE 6.20 . We installed Netweaver developer studio 2.0.5 and we created and web dynpro application successfully with the tutorial and tried to deploy it to the J2EE engine.
Deployment process expects J2EE engine and SDM server configuration to be maintained. When i go to Windows -> Preferences in Netweaver developer studion i see SAP J2EE Engine and i configured it with Host and port, But i didn't see Software deployment manger plugin, How can i install this SDM plugin? Where do i find this plugin?
Is that possible to deploy it by taking the Project package(.ear) file and import it with SDM? Is there any document explaining it?
Thank you
arun

Hi Arun,
the SDM plugin was available in earlier versions of the DevStudio. Now the SDM of the configured J2EE engine is used, there are no additional steps needed.
But anyway, Web Dynpro applications will not run on WAS 6.20, so it's pretty useless to get deployment working.
Regards
Stefan

Problems Installing Netweaver Developer Studio 7.0 SP 15

Similar Messages

Maybe you are looking for