Problem installing AMD Catalyst

I downloaded the catalyst pkgfile from AUR and noticed it required catalyst-utils for installation. So i downloaded and made the package file.
After completely making the install-able tar.xg file I started the installation. As stated the fglrx needed to remove ligl so I agreed but as soon as I press enter I get this error
Computer : AMD A8 3850
resolving dependencies...
looking for inter-conflicts...
error: unresolvable package conflicts detected
:: catalyst-utils and libgl are in conflict
resolving dependencies...
looking for inter-conflicts...
:: ati-dri: requires libgl=7.10.3
:: intel-dri: requires libgl=7.10.3
:: mach64-dri: requires libgl=7.10.3
:: mga-dri: requires libgl=7.10.3
:: r128-dri: requires libgl=7.10.3
:: savage-dri: requires libgl=7.10.3
:: sis-dri: requires libgl=7.10.3
:: tdfx-dri: requires libgl=7.10.3
Please help

Cdh wrote:
karol wrote:Why do you have all these *-dri packages?
Because
~ % pacman -Sg xorg
xorg xorg-server-catalyst-maximize-fix
xorg xf86-input-acecad
xorg xf86-input-aiptek
xorg xf86-input-evdev
xorg xf86-input-joystick
xorg xf86-input-keyboard
xorg xf86-input-mouse
xorg xf86-input-synaptics
xorg xf86-input-vmmouse
xorg xf86-input-void
xorg xf86-video-apm
xorg xf86-video-ark
xorg xf86-video-ast
xorg xf86-video-ati
xorg xf86-video-chips
xorg xf86-video-cirrus
xorg xf86-video-dummy
xorg xf86-video-fbdev
xorg xf86-video-glint
xorg xf86-video-i128
xorg xf86-video-i740
xorg xf86-video-intel
xorg xf86-video-mach64
xorg xf86-video-mga
xorg xf86-video-neomagic
xorg xf86-video-nv
xorg xf86-video-r128
xorg xf86-video-rendition
xorg xf86-video-s3
xorg xf86-video-s3virge
xorg xf86-video-savage
xorg xf86-video-siliconmotion
xorg xf86-video-sis
xorg xf86-video-sisusb
xorg xf86-video-tdfx
xorg xf86-video-trident
xorg xf86-video-tseng
xorg xf86-video-v4l
xorg xf86-video-vesa
xorg xf86-video-vmware
xorg xf86-video-voodoo
xorg xf86-video-xgi
xorg xf86-video-xgixp
xorg xorg-bdftopcf
xorg xorg-docs
xorg xorg-fonts-100dpi
xorg xorg-fonts-75dpi
xorg xorg-fonts-encodings
xorg xorg-font-util
xorg xorg-iceauth
xorg xorg-luit
xorg xorg-mkfontdir
xorg xorg-mkfontscale
xorg xorg-server
xorg xorg-sessreg
xorg xorg-setxkbmap
xorg xorg-smproxy
xorg xorg-x11perf
xorg xorg-xauth
xorg xorg-xbacklight
xorg xorg-xcmsdb
xorg xorg-xcursorgen
xorg xorg-xdpyinfo
xorg xorg-xdriinfo
xorg xorg-xev
xorg xorg-xgamma
xorg xorg-xhost
xorg xorg-xinput
xorg xorg-xkbcomp
xorg xorg-xkbevd
xorg xorg-xkbutils
xorg xorg-xkill
xorg xorg-xlsatoms
xorg xorg-xlsclients
xorg xorg-xmodmap
xorg xorg-xpr
xorg xorg-xprop
xorg xorg-xrandr
xorg xorg-xrdb
xorg xorg-xrefresh
xorg xorg-xset
xorg xorg-xsetroot
xorg xorg-xvinfo
xorg xorg-xwd
xorg xorg-xwininfo
xorg xorg-xwud
xorg xf86-video-ati
xorg xf86-video-mach64
xorg xorg-server
Yeah, *I* know, but I was curious why OP thought it was necessary to install the whole group.
Cdh wrote:Just remove the unnecessary xf86-video-* and *-dri packages.
Or he can uninstall the whole group and install only the packages he needs.

Similar Messages

Windows 8.1 doesn't hibernate or sleep after installing amd catalyst driver

hi i am using windows 8.1 64 bit but after installing a amd catalyst center windows behaviour changed it doesn't go for hibernate and sleep and after unstall it windows comes into normal position please refered me proper solution to install amd driver wihout any issue and also suggest me which version will be compatible with my device i have tried amd 14.9 and also 14.11 but issues didn't solve i am curretnly using intel Version10.18.10.3325 windows update show me amd wddi 1.3 driver but it always failed not installing..
Hp pavilion-15 n037tx Notebook
core i5 4200U
4gb ram
This question was solved.
View Solution.

Hi @Ahmed-Aslam
I understand that you are have problems with hibernate and sleep on your notebook.
I would review the attached document. I realize from your post that you have tried some of the things listed, but just check it and see if anything there was missed, perhaps the section on malware issues.
Troubleshooting sleep and hibernate issues in Windows 8
You can also try using system restore to roll back to before the software update to see if that resolves the issue.
Using Microsoft System Restore (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Problem Installing AMD Proprietary Driver.

Hey Guys,
As the title says I am having a problem installing the amd catalyst beta driver. I tried installing it and it completely screwed everything up. Now I have a fresh install of Arch, and the only packages that I have installed apart from xf86-video-ati and xorg are enlightenment, lightdm, gnome, base-devel, and firefox. Im not sure what is wrong. The only thing it mentioned in the log was something about needing 3.8 headers, but if i am not mistaken Arch has 3.12. I also installed it on a linux mint system with 3.11 and it went without any issue. I believe that it is supposed to work on 3.12, but im not sure what I need to get it to install on my system. Any help would be much appreciated.

Sorry for getting back so late. @HalosGhost I have always used the one that came directly from AMD and since this is my first time using Arch i did not know that I would run into problems trying to use it. As far as the --force thing goes. I had a "What the Hell Moment". @Archivist: catalyst-test worked, but my sound via HDMI does not.
aplay -l shows my HDMI:
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
I also tried aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav and it worked without any error.
I then tried creation an .asoundrc file like the wiki said https://wiki.archlinux.org/index.php/Ad … s_not_work and that did not work either.
Last edited by jtag1458 (2014-02-24 16:45:14)

[Solved]Installed AMD Catalyst drivers. Are they activated?

This must be a really stupid question.
I have installed the Catalyst drivers from the repo, but in KinfoCenter I'm getting something else:
It's not a VMware installation, it's alongside Windows.
So, am I using the Catalyst drivers or not?
Thanks.
Last edited by archie0 (2012-07-10 19:21:22)

ewaller wrote:
archie0:
Those pictures are a little larger than permitted by our policy. I usually only concern myself with the byte count, rather than the pixel count. Don't worry about these, but, in the future, please use thumbnails. You can embed image tags to the thumbnail inside of url tags to the full size image. This will display the thumbnail and give the reader the option to click through to the larger image.
Many of our members are on slow or metered links. Thanks
I'm sorry but the image is just 125KB, and that's not much at all, even for a slow connection.
Anyways, is there a bug in KinfoCenter? How does it read those values? I would like to try them manually. Thanks
Last edited by archie0 (2012-07-08 06:21:47)

Gnome crash after installing amd catalyst

Installed arch on my Acer Iconia tab w500 with Gnome as the DE.
Performance using the open-source driver was bad, so i tried the amd driver, following these steps:
https://wiki.archlinux.org/index.php/AM … repository
Used Vi0L0's repository and followed the steps from " Configuring the driver ". However, when i restart, Gnome says 'On no! Something has gone wrong' and invites me to log out.. logging in back again presents me to the same screen.
Info that might be usefull:
$ lsmod | grep flgrx
fglrx 9175838 33
amd_iommu_v2 17450 1 fglrx
button 12909 1 fglrx
running 'fglrxinfo' gives me an error. Unable to open display(null). Because i am on the CLI.
$ grep '(EE)' /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 116.907] (EE) systemd-logind: failed to get session: PID 615 does not belong to any knows session
[121.639] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
$ grep '(WW)' /var/log/Xorg.0.log
Running this command i see the following problems:
fonts.dir not found in "/usr/share/fonts/100dpi/".
Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Falling back to old probe method for fglrx
fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found ---> This mesage appears multiple times with different values
fglrx(0): board is an unknown third pary board, chipset is supported
fglrx(0): Option "VendorName" is not used
fglrx(0): Option "ModelName" is not used
Last edited by GodsOtherHand (2014-10-18 21:22:55)

Well, not quite. Yes, gdm had issues with catalyst since 3.12. That can be worked arround by using a different Login Manager - e.g. kdm, lightdm and whatnot. Or Downgrading gdm and libgdm to 3.10. The symptoms are a black screen at start, since gdm crashes. You can still start a gnome-session via startx.
This issue is seperate. Here, gnome session crashes, even when started via startx. I've got the same issue, but no solution yet.

[SOLVED]Problem installing ATI catalyst drivers

Hello arch users, ive been having trouble when installing the ati proprietary drivers through pacman. I followed the wiki and added the catalyst repo into my pacman.conf file. however when i type in sudo pacman -Syu i get this:
:: Synchronizing package databases...
error: failed retrieving file 'catalyst.db' from catalyst.apocalypsus.net : The requested URL returned error: 404
error: failed to update catalyst (download library error)
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
there is nothing to do
and when i try to install catalyst and catalyst-utils i get this as an output:
resolving dependencies...
looking for inter-conflicts...
:: catalyst-utils and libgl are in conflict. Remove libgl? [y/N] y
:: catalyst and ati-dri are in conflict. Remove ati-dri? [y/N] y
Targets (6): ati-dri-8.0.4-1 [removal] libgl-8.0.4-1 [removal]
netkit-bsd-finger-0.17-7 xinetd-2.3.15-2 catalyst-12.6-3
catalyst-utils-12.6-1
Total Installed Size: 121.91 MiB
Net Upgrade Size: 74.13 MiB
Proceed with installation? [Y/n] y
(4/4) checking package integrity [######################] 100%
error: catalyst-utils: signature from "Vi0L0 <[email protected]>" is unknown trust
error: catalyst: signature from "Vi0L0 <[email protected]>" is unknown trust
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
any idea on what to do?
i want to use the proprietary over the open source because it gives me less problems when using 3d rendering.
or are there any other ways of installing these packages other than pacman?
Last edited by CokaBear (2012-07-19 19:45:35)

You could add 'SigLevel = Never' under the catalyst repo in pacman.conf, so that it doesn't check for package integrity.
And about the 404, maybe your 'Server' is incorrect. I use 'Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch'

Problems installing amd drivers on HP Dv7 for windows 10

I have the HP DV7 4263cl with switchable graphics AMD chipset M880G with both Mobility Radeon HD 4250 and AMD 6370m. My processor is the AMD Phenom II. The drivers on HP's support site for my laptop are very old (2010) and work fine in Windows 7. However when I try to install the drivers in compatability mode on in Windows 8.1 or 10 or manually install them through the device manager, my computer does not respond well and doesnt install everything fully and either shuts down or shows a blue error screen.
I have tried everything and haven't had any luck getting these installed. Please Help!!!!

Yours is the third post I've seen about switchable graphics not working in Windows 10. Sadly, you may have to simply hope for a Windows 10 driver update. Have you checked for a Chipset or BIOS/UEFI update? Maybe you would have better luck on the AMD forum. If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

Amd catalyst & built-in display driver clash

Hello,
I have a core i5 HP pavilion dv6 entertainment notebook pc with the following specs:
Processor: 2.53Ghz
RAM: 8 Gb
Operating system: Win 7 x64
AMD Radeon HD 6500M/5600/5700 Series: 1 GB
System Model: 3141se
I had a recovery partition on my laptop but a while back when I tried to run it, I kept on getting the same error message " your partition is of GPT style or something like that" and I had to wipe the whole drive and tried recovering from the backup DVDs, without any luck.
Having said that, I installed another copy of Win 7 with the original key provided and it was working fine. A couple of days back I installed a fresh copy of windows and now the problem I am facing is something like that:
Built-in intel display and AMD display driver installs, but I dont see anything in adapter section. Which means no graphics card is installed. When ever I install AMD catalyst driver, my windows turn black and stay that way forever (even though windows in running normally).
Whenever I disable built-in display driver from "device manager" it works fine. But I have had no luck installing AMD catalyst control, I tried literally every version available.
Kindly, help me fix this issue. My Laptop is a crap without the graphics card.
quick help would be appreciated.
Thank you

Use the recovery media to install the AMD graphics driver softpaq.
Choose the AMD video graphics softpaq from the list that appears. The following image is an example from a former HP product loan I was provided by HP. What you see will be a bit different since the notebooks are not in the same model range.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

AMD Catalyst breaks TTY

Hi,
I have installed AMD Catalyst. When I boot, virtual console appears as usual (since I don't use a display manager), I am able to login, and I can run Xorg.
But once Xorg has been launched, if I try to switch back to TTY, only a black screen appears. The console does still work though, if I type startx, Xfce starts again. There is just no text.
I already tried this, but without success.
GPU: AMD Radeon HD 6870
/etc/default/grub Kernel parameters:
GRUB_CMDLINE_LINUX_DEFAULT="quiet nomodeset vga=0x0346 cryptdevice=/dev/lvm/Root:root root=/dev/mapper/root resume=/dev/mapper/swap"
/etc/mkinitcpio.conf hooks:
HOOKS="base udev autodetect modconf block keymap lvm2 encrypt filesystems keyboard fsck"

hi, I suppose than like me you use xorg 1.17 and catalyst-test from AUR, if is the case here a comment in the package page from packager and maintainer of catalyst stuff:
Vi0L0 wrote:
2015-03-13 21:14
updated to 15.3-1:
- borrowed from ubuntu.
- brings xserver 1.17 support
- its buggy
I was thinking for long time about uploading this driver because I think it sucks . On xserver 1.17 xv video output doesn't work at all, as well as tty terminal, which is sad . After switching to xserver 1.16 it gets back to normal. I remember that in the past AMD did release ubuntu driver which had same bugs.
So it sucks, steam games are working fine, maybe better, but still.
And since this package is called catalyst-test i decided to make this update, you can switch to catalyst-total in no-time.
I also dropped many patches and left only most neccessary, so 1) for intel iommu, 2) for agp 3) for 4.0 kernel support. You can still uncomment dropped one if you want.

My trial of AMD Catalyst 12.3 and 12.2 pre-certified driver on Macbook Pro 2011 early

I would like to share my experience on installing AMD catalyst 12.3 and 12.2 pre-certified driver on macbook pro 2011 early. Before installing the drivers, I first used catalyst install manager to remove the previously installed driver and then driver sweeper to clean the residuals. After the cleaning process, the macbook pro simply backed to VGA display.
Unfortunately, the setup programs of these two drivers showed different behaviors. The 12.2 pre-certified setup program could detect the 6750M chip and install AMD display driver. You can tell the behavior by watching the messages shown during the installation process. Nevertheless, AMD seemed change the behavior the setup program. The program did not install the display driver & CCC but still continued to install HDMI/DP driver and other stuffs.
In short, if somebody wants to install 12.3, he definitely needs some extra tricks to do so.

Boot into Safe Mode for a while to see if the panics cease. Meanwhile you need to upgrade Parallels to the current version, 7.x. If you are using the USB to Ethernet adaptor then unplug it along with any other peripherals. Uninstall LittleSnitch, Ambrosia extension, and VaraAudio extension (or uninstall the software that installed them using their uninstallers.)

[AMD Catalyst] problem with "major" file

Hi, I'm using now the free driver xf86-video-ati for my [Radeon 9200 SE] card, and for several reasons, I want to switch to the proprietary driver, Catalyst.
I followed all the steps of the wiki, but when I "startx", it display:
ukiDynamicMajor = failed to open /proc/ati/major
I would precise that the command "modprobe fglrx" says "fglrx is not a valid expression". I hesitated to use aticonfig, but people say that creating one xorg.cong is bad; thus I have deleted this option.
What I have done:
pacman -S catalyst-hook catalyst-utils catalyst-libgl opencl-catalyst (install succeed)
pacman -R xf86-video-intel xf86-input-evdev (uninstall succeed exept for xf86-input-evdev because of his dependence on xorg-server)
modprobe fglrx (doesn't work)
touch /etc/modules-load.d/catalyst.conf (the file already exist)
less /etc/modules-load.d/catalyst.conf ("fglrx")
touch /etc/X11/xorg-conf.d/20-catalyst.conf
nano /etc/X11/xorg-conf.d/20-catalyst.conf
[quote]
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BusID "PCI:1:00:1"
EndSection
[/quote]
rnmod radeon (doesn't work => rnmod is not a valid program)
touch /etc/modprobe.d/radeon_blacklist (sucessful)
echo /etc/modprobe.d/radeon_blacklist "blacklist radeon"( sucessful)
Config:
uname -a
Linux archlinux-desktop 3.14.3-1-ARCH #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014 i686 GNU/Linux
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 14)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (rev 01)
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (Secondary) (rev 01)
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.3-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 (GCC) ) #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000, BIOS F2 10/15/2003
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5370-0x000f537f] mapped at [c00f5370]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1f800000-0x1fbfffff]
[ 0.000000] [mem 0x1f800000-0x1fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x18000000-0x1f7fffff]
[ 0.000000] [mem 0x18000000-0x1f7fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x17ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1fc00000-0x1ffeffff]
[ 0.000000] [mem 0x1fc00000-0x1ffeffff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1efe2000-0x1f302fff]
[ 0.000000] ACPI: RSDP 000f7520 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 1fff3000 00002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: FACP 1fff3040 000074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: DSDT 1fff30c0 003104 (v01 GBT AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 1fff0000 000040
[ 0.000000] ACPI: APIC 1fff6200 000068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1ffeffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1ffeffff]
[ 0.000000] On node 0 totalpages: 130958
[ 0.000000] free_area_init_node: node 0, pgdat c15fc600, node_mem_map dfbf0020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 126960 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @dfbd0000 s33792 r0 d23552 u57344
[ 0.000000] pcpu-alloc: s33792 r0 d23552 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129934
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=14bd8feb-04a9-4b92-b3cb-798729208c52 rw quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1048440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 507120K/523832K available (4446K kernel code, 470K rwdata, 1280K rodata, 568K init, 956K bss, 16712K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc160f000 - 0xc169d000 ( 568 kB)
.data : 0xc1457c92 - 0xc160eb40 (1755 kB)
.text : 0xc1000000 - 0xc1457c92 (4447 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=df408000 soft=df40a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2625.859 MHz processor
[ 0.003353] Calibrating delay loop (skipped), value calculated using timer frequency.. 5253.53 BogoMIPS (lpj=8752863)
[ 0.003360] pid_max: default: 32768 minimum: 301
[ 0.003378] ACPI: Core revision 20131218
[ 0.008679] ACPI: All ACPI Tables successfully acquired
[ 0.010020] Security Framework initialized
[ 0.010032] Yama: becoming mindful.
[ 0.010064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010069] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010456] Initializing cgroup subsys memory
[ 0.010473] Initializing cgroup subsys devices
[ 0.010478] Initializing cgroup subsys freezer
[ 0.010482] Initializing cgroup subsys net_cls
[ 0.010485] Initializing cgroup subsys blkio
[ 0.010546] CPU0: Hyper-Threading is disabled
[ 0.010555] mce: CPU supports 4 MCE banks
[ 0.010568] CPU0: Thermal monitoring enabled (TM1)
[ 0.010592] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[ 0.018898] ftrace: allocating 18912 entries in 37 pages
[ 0.026857] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027167] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062643] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.60GHz (fam: 0f, model: 02, stepping: 09)
[ 0.063333] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.063333] ... version: 0
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 18
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 0000007fffffffff
[ 0.063333] ... fixed-purpose events: 0
[ 0.063333] ... event mask: 000000000003ffff
[ 0.076710] x86: Booted up 1 node, 1 CPUs
[ 0.076719] smpboot: Total of 1 processors activated (5253.53 BogoMIPS)
[ 0.077148] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.077427] devtmpfs: initialized
[ 0.077889] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes)
[ 0.079963] pinctrl core: initialized pinctrl subsystem
[ 0.080103] RTC time: 16:19:41, date: 05/12/14
[ 0.080222] NET: Registered protocol family 16
[ 0.080459] cpuidle: using governor ladder
[ 0.080464] cpuidle: using governor menu
[ 0.080574] ACPI: bus type PCI registered
[ 0.080581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.092329] PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=1
[ 0.092335] PCI: Using configuration type 1 for base access
[ 0.093965] bio: create slab <bio-0> at 0
[ 0.094273] ACPI: Added _OSI(Module Device)
[ 0.094279] ACPI: Added _OSI(Processor Device)
[ 0.094282] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.094286] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.098161] ACPI: Interpreter enabled
[ 0.098184] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[ 0.098193] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.098216] ACPI: (supports S0 S3 S4 S5)
[ 0.098220] ACPI: Using IOAPIC for interrupt routing
[ 0.098299] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.098438] ACPI: No dock devices found.
[ 0.108047] ACPI: \_PR_.CPU1: failed to get CPU APIC ID.
[ 0.108184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.108198] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.108210] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.108371] acpi PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
[ 0.108378] acpi PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
[ 0.108381] acpi PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
[ 0.108385] acpi PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
[ 0.108389] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.108393] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.108397] PCI: root bus 00: using default resources
[ 0.108402] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.108726] PCI host bridge to bus 0000:00
[ 0.108736] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.108741] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.108746] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.108768] pci 0000:00:00.0: [1039:0648] type 00 class 0x060000
[ 0.108783] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff]
[ 0.109012] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
[ 0.109196] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
[ 0.109281] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.109447] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
[ 0.109507] pci 0000:00:02.1: reg 0x20: [io 0x1400-0x141f]
[ 0.109684] pci 0000:00:02.3: [1039:7007] type 00 class 0x0c0010
[ 0.109711] pci 0000:00:02.3: reg 0x10: [mem 0xeb000000-0xeb000fff]
[ 0.109771] pci 0000:00:02.3: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.109811] pci 0000:00:02.3: supports D1 D2
[ 0.109815] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.110016] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
[ 0.110085] pci 0000:00:02.5: reg 0x20: [io 0xf000-0xf00f]
[ 0.110284] pci 0000:00:02.6: [1039:7013] type 00 class 0x070300
[ 0.110311] pci 0000:00:02.6: reg 0x10: [io 0xd000-0xd0ff]
[ 0.110325] pci 0000:00:02.6: reg 0x14: [io 0xd400-0xd47f]
[ 0.110410] pci 0000:00:02.6: supports D1 D2
[ 0.110414] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.110506] pci 0000:00:02.6: System wakeup disabled by ACPI
[ 0.110605] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[ 0.110631] pci 0000:00:02.7: reg 0x10: [io 0xd800-0xd8ff]
[ 0.110645] pci 0000:00:02.7: reg 0x14: [io 0xdc00-0xdc7f]
[ 0.110730] pci 0000:00:02.7: supports D1 D2
[ 0.110734] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.110907] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[ 0.110929] pci 0000:00:03.0: reg 0x10: [mem 0xeb001000-0xeb001fff]
[ 0.111078] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.111177] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[ 0.111199] pci 0000:00:03.1: reg 0x10: [mem 0xeb002000-0xeb002fff]
[ 0.111356] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 0.111454] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
[ 0.111475] pci 0000:00:03.2: reg 0x10: [mem 0xeb003000-0xeb003fff]
[ 0.111623] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 0.111734] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[ 0.111760] pci 0000:00:03.3: reg 0x10: [mem 0xeb004000-0xeb004fff]
[ 0.111850] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.112045] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
[ 0.112070] pci 0000:00:0f.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.112083] pci 0000:00:0f.0: reg 0x14: [mem 0xeb005000-0xeb0050ff]
[ 0.112169] pci 0000:00:0f.0: supports D1 D2
[ 0.112173] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
[ 0.112437] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
[ 0.112464] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.112476] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.112488] pci 0000:01:00.0: reg 0x18: [mem 0xe9000000-0xe900ffff]
[ 0.112521] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.112565] pci 0000:01:00.0: supports D1 D2
[ 0.112661] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
[ 0.112682] pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.112695] pci 0000:01:00.1: reg 0x14: [mem 0xe9010000-0xe901ffff]
[ 0.112764] pci 0000:01:00.1: supports D1 D2
[ 0.112888] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.112896] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.112904] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.112910] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff pref]
[ 0.112924] pci_bus 0000:00: on NUMA node 0
[ 0.113106] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.113252] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.113436] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.113579] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.113723] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.113876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.114026] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.114178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.114969] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.115202] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.115209] vgaarb: loaded
[ 0.115211] vgaarb: bridge control possible 0000:01:00.0
[ 0.115301] PCI: Using ACPI for IRQ routing
[ 0.115309] PCI: pci_cache_line_size set to 64 bytes
[ 0.115368] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.115373] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
[ 0.115616] NetLabel: Initializing
[ 0.115622] NetLabel: domain hash size = 128
[ 0.115624] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.115655] NetLabel: unlabeled traffic allowed by default
[ 0.115740] Switched to clocksource refined-jiffies
[ 0.129136] pnp: PnP ACPI init
[ 0.129177] ACPI: bus type PNP registered
[ 0.129597] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.130147] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.130157] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.130162] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.130170] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130207] pnp 00:02: [dma 4]
[ 0.130277] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.130404] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.130503] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.130621] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.130910] pnp 00:06: [dma 2]
[ 0.131028] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.131556] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.132089] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.132675] pnp 00:09: [dma 3]
[ 0.132810] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.133009] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.133074] pnp: PnP ACPI: found 11 devices
[ 0.133080] ACPI: bus type PNP unregistered
[ 0.174911] Switched to clocksource acpi_pm
[ 0.174951] pci 0000:00:02.3: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
[ 0.174962] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
[ 0.174969] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.174975] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.174983] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.174989] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff pref]
[ 0.174999] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.175003] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.175007] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.175010] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.175013] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
[ 0.175076] NET: Registered protocol family 2
[ 0.175437] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.175457] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.175477] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.175521] TCP: reno registered
[ 0.175531] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.175541] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.175688] NET: Registered protocol family 1
[ 0.397112] pci 0000:01:00.0: Boot video device
[ 0.397124] PCI: CLS 32 bytes, default 64
[ 0.397238] Unpacking initramfs...
[ 0.517648] Freeing initrd memory: 3204K (defe2000 - df303000)
[ 0.517809] apm: BIOS not found.
[ 0.517886] Scanning for low memory corruption every 60 seconds
[ 0.518572] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.533762] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.536896] zbud: loaded
[ 0.537090] VFS: Disk quotas dquot_6.5.2
[ 0.537200] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.537623] msgmni has been set to 996
[ 0.537789] Key type big_key registered
[ 0.538268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.538390] io scheduler noop registered
[ 0.538397] io scheduler deadline registered
[ 0.538493] io scheduler cfq registered (default)
[ 0.538712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.538757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.538862] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.538866] vesafb: scrolling: redraw
[ 0.538870] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.539366] vesafb: framebuffer at 0xd8000000, mapped to 0xe0800000, using 5120k, total 5120k
[ 0.646493] Console: switching to colour frame buffer device 160x64
[ 0.753177] fb0: VESA VGA frame buffer device
[ 0.753268] GHES: HEST is not enabled!
[ 0.753308] isapnp: Scanning for PnP cards...
[ 1.066034] isapnp: No Plug & Play device found
[ 1.066191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.086839] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.107535] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.108786] rtc_cmos 00:03: RTC can wake from S4
[ 1.109049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.109090] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
[ 1.109177] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.109384] TCP: cubic registered
[ 1.109696] NET: Registered protocol family 10
[ 1.110235] NET: Registered protocol family 17
[ 1.110539] Using IPI No-Shortcut mode
[ 1.110887] registered taskstats version 1
[ 1.111374] Magic number: 14:861:337
[ 1.111396] tty tty58: hash matches
[ 1.111477] rtc_cmos 00:03: setting system clock to 2014-05-12 16:19:42 UTC (1399911582)
[ 1.111561] PM: Hibernation image not present or could not be loaded.
[ 1.112337] Freeing unused kernel memory: 568K (c160f000 - c169d000)
[ 1.112374] Write protecting the kernel text: 4448k
[ 1.112407] Write protecting the kernel read-only data: 1284k
[ 1.132515] random: systemd-tmpfile urandom read with 0 bits of entropy available
[ 1.140455] systemd-udevd[40]: starting version 212
[ 1.240350] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.240356] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.240605] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.249861] Floppy drive(s): fd0 is 1.44M
[ 1.263944] FDC 0 is a post-1991 82077
[ 1.295454] SCSI subsystem initialized
[ 1.312358] ACPI: bus type USB registered
[ 1.312456] usbcore: registered new interface driver usbfs
[ 1.312497] usbcore: registered new interface driver hub
[ 1.316781] usbcore: registered new device driver usb
[ 1.317900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.318313] ehci-pci: EHCI PCI platform driver
[ 1.319280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.319680] ohci-pci: OHCI PCI platform driver
[ 1.327015] libata version 3.00 loaded.
[ 1.363547] firewire_ohci 0000:00:02.3: added OHCI v1.0 device as card 0, 4 IR + 6 IT contexts, quirks 0x0
[ 1.364218] ehci-pci 0000:00:03.3: EHCI Host Controller
[ 1.364240] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 1.364332] ehci-pci 0000:00:03.3: irq 23, io mem 0xeb004000
[ 1.373423] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.373943] hub 1-0:1.0: USB hub found
[ 1.373981] hub 1-0:1.0: 6 ports detected
[ 1.375001] ohci-pci 0000:00:03.0: OHCI PCI host controller
[ 1.375023] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.375100] ohci-pci 0000:00:03.0: irq 20, io mem 0xeb001000
[ 1.429251] hub 2-0:1.0: USB hub found
[ 1.429296] hub 2-0:1.0: 2 ports detected
[ 1.429636] pata_sis 0000:00:02.5: version 0.5.2
[ 1.429683] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 1.437030] scsi0 : pata_sis
[ 1.443413] scsi1 : pata_sis
[ 1.443626] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.443633] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.444146] ohci-pci 0000:00:03.1: OHCI PCI host controller
[ 1.444168] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.444242] ohci-pci 0000:00:03.1: irq 21, io mem 0xeb002000
[ 1.453047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.499191] hub 3-0:1.0: USB hub found
[ 1.499232] hub 3-0:1.0: 2 ports detected
[ 1.499756] ohci-pci 0000:00:03.2: OHCI PCI host controller
[ 1.499778] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 1.499856] ohci-pci 0000:00:03.2: irq 22, io mem 0xeb003000
[ 1.520042] tsc: Refined TSC clocksource calibration: 2625.851 MHz
[ 1.552850] hub 4-0:1.0: USB hub found
[ 1.552893] hub 4-0:1.0: 2 ports detected
[ 1.603787] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 1.603796] ata1.00: 160086528 sectors, multi 16: LBA
[ 1.617092] ata1.00: configured for UDMA/133
[ 1.617362] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 1.733392] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 1.861345] hub 1-4:1.0: USB hub found
[ 1.861759] hub 1-4:1.0: 4 ports detected
[ 1.863604] firewire_core 0000:00:02.3: created device fw0: GUID 00000d610024cc70, S400
[ 1.906938] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0017, max UDMA/66
[ 1.906951] ata2.01: ATAPI: LITE-ON DVD+RW LDW-401S, E9S3, max UDMA/33
[ 1.920261] ata2.00: configured for UDMA/66
[ 1.933596] ata2.01: configured for UDMA/33
[ 1.942307] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0017 PQ: 0 ANSI: 5
[ 1.943253] scsi 1:0:1:0: CD-ROM LITE-ON DVD+RW LDW-401S E9S3 PQ: 0 ANSI: 5
[ 1.968652] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.968905] sd 0:0:0:0: [sda] Write Protect is off
[ 1.968913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.969022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.979035] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.979044] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.979566] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.991510] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.991993] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.009048] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 2.010569] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.143550] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 2.345412] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.358710] usbcore: registered new interface driver usbhid
[ 2.358717] usbhid: USB HID core driver
[ 2.361517] input: HID 04d9:048e as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:04D9:048E.0001/input/input1
[ 2.361837] hid-generic 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:03.0-1/input0
[ 2.407135] usb 1-4.4: new high-speed USB device number 4 using ehci-pci
[ 2.500521] usb-storage 1-4.4:1.0: USB Mass Storage device detected
[ 2.500774] scsi2 : usb-storage 1-4.4:1.0
[ 2.502128] usbcore: registered new interface driver usb-storage
[ 2.520155] Switched to clocksource tsc
[ 3.175339] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.505428] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 3.507279] sd 2:0:0:0: [sdb] 15273600 512-byte logical blocks: (7.82 GB/7.28 GiB)
[ 3.508020] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.508029] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.508769] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.509434] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.513361] random: nonblocking pool is initialized
[ 3.514387] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.515049] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.517301] sdb: sdb1 sdb2
[ 3.520401] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.521391] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.522153] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 3.928631] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 3.929099] systemd[1]: Detected architecture 'x86'.
[ 3.937340] systemd[1]: Set hostname to <archlinux-desktop>.
[ 5.174046] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.175398] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.175650] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.175707] systemd[1]: Starting Remote File Systems.
[ 5.175758] systemd[1]: Reached target Remote File Systems.
[ 5.175820] systemd[1]: Starting Encrypted Volumes.
[ 5.175867] systemd[1]: Reached target Encrypted Volumes.
[ 5.175954] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.176267] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.176359] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.176504] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.176555] systemd[1]: Starting Swap.
[ 5.176602] systemd[1]: Reached target Swap.
[ 5.176652] systemd[1]: Expecting device dev-disk-by\x2duuid-4e223aa4\x2d3894\x2d41bc\x2db82c\x2d955ae89b3eb2.device...
[ 5.176796] systemd[1]: Expecting device dev-disk-by\x2duuid-b7ca07ac\x2d5ceb\x2d40d6\x2db55c\x2ded651e31f452.device...
[ 5.176850] systemd[1]: Starting Root Slice.
[ 5.208364] systemd[1]: Created slice Root Slice.
[ 5.208422] systemd[1]: Starting User and Session Slice.
[ 5.209187] systemd[1]: Created slice User and Session Slice.
[ 5.209244] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.209403] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.209451] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.209585] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.209635] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.209740] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.209789] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.209917] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.209982] systemd[1]: Starting udev Kernel Socket.
[ 5.210180] systemd[1]: Listening on udev Kernel Socket.
[ 5.210249] systemd[1]: Starting udev Control Socket.
[ 5.210366] systemd[1]: Listening on udev Control Socket.
[ 5.210428] systemd[1]: Starting Journal Socket.
[ 5.210621] systemd[1]: Listening on Journal Socket.
[ 5.210717] systemd[1]: Starting System Slice.
[ 5.211489] systemd[1]: Created slice System Slice.
[ 5.211583] systemd[1]: Started File System Check on Root Device.
[ 5.211623] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.212405] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.212459] systemd[1]: Mounting Temporary Directory...
[ 5.239615] systemd[1]: Starting system-getty.slice.
[ 5.240697] systemd[1]: Created slice system-getty.slice.
[ 5.240838] systemd[1]: Mounting Debug File System...
[ 5.279740] systemd[1]: Started Load Kernel Modules.
[ 5.296122] systemd[1]: Starting Apply Kernel Variables...
[ 5.297870] systemd[1]: Starting Setup Virtual Console...
[ 5.299634] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.301446] systemd[1]: Mounting Configuration File System...
[ 5.344473] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.346155] systemd[1]: Mounted FUSE Control File System.
[ 5.346271] systemd[1]: Mounting Huge Pages File System...
[ 5.370976] systemd[1]: Starting Set Up Additional Binary Formats...
[ 5.372655] systemd[1]: Starting udev Coldplug all Devices...
[ 5.374485] systemd[1]: Starting Journal Service...
[ 5.376393] systemd[1]: Started Journal Service.
[ 5.926924] systemd-udevd[120]: starting version 212
[ 6.249395] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 7.438155] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.438167] ACPI: Power Button [PWRB]
[ 7.438350] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.438360] ACPI: Power Button [PWRF]
[ 7.585684] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.625549] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.625639] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 7.658989] Linux agpgart interface v0.103
[ 7.722256] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400
[ 7.809304] [drm] Initialized drm 1.1.0 20060810
[ 7.958917] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 7.958969] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 7.980566] mousedev: PS/2 mouse device common for all mice
[ 7.980931] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 7.984132] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0xe1724000, 00:0d:61:22:1d:3c, IRQ 16
[ 7.985877] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
[ 8.016252] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 8.116064] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.251837] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x11
[ 8.261786] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 8.279526] [drm] radeon kernel modesetting enabled.
[ 8.279631] checking generic (d8000000 500000) vs hw (d8000000 8000000)
[ 8.279639] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 8.279680] Console: switching to colour dummy device 80x25
[ 8.301981] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x1458:0x4032).
[ 8.302015] [drm] register mmio base: 0xE9000000
[ 8.302018] [drm] register mmio size: 65536
[ 8.302188] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
[ 8.302214] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 8.302220] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[ 8.313685] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 8.313704] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
[ 8.313711] [drm] Generation 2 PCI interface, using max accessible memory
[ 8.313718] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (128M used)
[ 8.313742] [drm] Detected VRAM RAM=128M, BAR=128M
[ 8.313746] [drm] RAM width 64bits DDR
[ 8.318743] [TTM] Zone kernel: Available graphics memory: 255446 kiB
[ 8.318750] [TTM] Initializing pool allocator
[ 8.318762] [TTM] Initializing DMA pool allocator
[ 8.318815] [drm] radeon: 128M of VRAM memory ready
[ 8.318821] [drm] radeon: 128M of GTT memory ready.
[ 8.321257] radeon 0000:01:00.0: WB disabled
[ 8.321270] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xe07fe000
[ 8.321276] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.321278] [drm] Driver supports precise vblank timestamp query.
[ 8.321311] [drm] radeon: irq initialized.
[ 8.321340] [drm] Loading R200 Microcode
[ 8.337126] ppdev: user-space parallel port driver
[ 8.350382] [drm] radeon: ring at 0x00000000D0001000
[ 8.350414] [drm] ring test succeeded in 1 usecs
[ 8.350728] [drm] ib test succeeded in 0 usecs
[ 8.351298] [drm] Radeon Display Connectors
[ 8.351305] [drm] Connector 0:
[ 8.351307] [drm] VGA-1
[ 8.351311] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 8.351313] [drm] Encoders:
[ 8.351315] [drm] CRT1: INTERNAL_DAC1
[ 8.351317] [drm] Connector 1:
[ 8.351319] [drm] SVIDEO-1
[ 8.351321] [drm] Encoders:
[ 8.351322] [drm] TV1: INTERNAL_DAC2
[ 8.481905] [drm] fb mappable at 0xD8040000
[ 8.481912] [drm] vram apper at 0xD8000000
[ 8.481914] [drm] size 8294400
[ 8.481916] [drm] fb depth is 24
[ 8.481918] [drm] pitch is 7680
[ 8.482299] fbcon: radeondrmfb (fb0) is primary device
[ 8.535240] Console: switching to colour frame buffer device 240x67
[ 8.614028] systemd-udevd[135]: renamed network interface eth0 to enp0s15
[ 8.614028] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 8.614034] radeon 0000:01:00.0: registered panic notifier
[ 8.614052] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 0
[ 9.523376] intel8x0_measure_ac97_clock: measured 52701 usecs (2535 samples)
[ 9.523383] intel8x0: clocking to 48000
[ 10.264223] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.529887] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.688972] systemd-journald[112]: Received request to flush runtime journal from PID 1
[ 11.588053] 8139too 0000:00:0f.0 enp0s15: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 130.919975] ISO 9660 Extensions: RRIP_1991A
[ 1052.318149] perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 2771.015182] systemd[1]: Starting Journal Service...
[ 2773.625872] systemd-journald[112]: Received SIGTERM from PID 1 (systemd).
[ 2773.907874] systemd[1]: Unit systemd-journald.service entered failed state.
[ 2773.921616] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 2773.922423] systemd[1]: Stopping Journal Service...
[ 2773.922521] systemd[1]: Starting Journal Service...
[ 2773.924633] systemd[1]: Started Journal Service.
[ 2774.243766] systemd-journald[860]: Received request to flush runtime journal from PID 1
[ 2848.068160] perf samples too long (5003 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
[ 2932.591054] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 2932.591064] Disabling lock debugging due to kernel taint
[ 2932.632805] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
[ 2932.633428] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 2932.633438] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 3146.754229] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
[ 3146.754491] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 3146.754495] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 3387.964180] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
[ 3387.964434] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 3387.964440] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
I have already seen this link and he explain that installing from AUR has resolved his problem, but the wiki says:
The second method you can use is the AUR; PKGBUILDs offered here are also made by Vi0L0 and are the same he uses to built packages for his repository. Lastly, you can install the driver directly from AMD.
My aim is to install Catalyst
Thank you for your help

I don't think that card is supported by AMD Catalyst anymore, even by the legacy branch...

Arch linux doesn't boot after installing AMD ATI Catalyst

I have a laptop which has a integrated graphic card intel 4th generation (4600) and an AMD ATI R9 m265x (hybrid Intel/AMD graphics card) so I have just installed AMD ATI Catalyst proprietary ones by following
AMD Catalyst ArchWiki.
I have used "Installing from the unofficial repository" method so in my pacman.conf I have added below entry for [catalyst-stable]:
[catalyst-stable]
Server = http://catalyst.wirephire.com/repo/catalyst/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://70.239.162.206/catalyst-mirror/repo/catalyst/$arch
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/catalyst/$arch
#Server = http://mirror.hactar.bz/Vi0L0/catalyst/$arch
Then I have update pacman's database and install below packages:
catalyst-hook
catalyst-utils-pxp
lib32-catalyst-utils-pxp
(No need to install catalyst-total-pxp as I have installed catalyst-utils-pxp)
After installing it, I have configured the driver, configuring X using below command:
# aticonfig --initial
In order to use PowerXpress support I have installed catalyst-utils-pxp package plus additional lib32-catalyst-utils-pxp.
To perform a switch into Intel's IGP I have also installed the mesa-libgl package and Intel's drivers: xf86-video-intel and intel-dri .
I have enable the automatic update by enabling the catalyst-hook.service with below commands since it automatically rebuilds the fglrx modules while the system shuts down or reboots (so I haven't to do it manually each time kernel is updated using Catalyst-generator):
# systemctl enable catalyst-hook
# systemctl start catalyst-hook
And finally I have blacklisted radeon module by creating "/etc/modprobe.d/blacklisted.conf" file which content is:
blacklist radeon
and also I have ensured that fglrx line is added in "/etc/modules-load.d/Catalyst.conf" file.
To avoid problems, I have rebuilt the fglrx module by doing (I know it is not necessary as it is done by catalyst-hook):
catalyst_build_module all
Once I reboot, arch linux does not boot. Last lines printed out are below and then it freezes:
Starting temp files linker to catalyst...
Starting Catalyst event Daemon...
[ OK ] Started Catalyst event Daemon
Starting Catalyst's fglrx kernel' module builder...
[ OK ] Started temp files linker for catalyst.
[ OK ] Started Catalyst's fglrx kernel' modue builder.
[ OK ] Started gnome Display manager.
[ OK ] Started Network manager.
[ OK ] Reached target Multi-User system.
[ OK ] Reached target Graphical Interface.
[ OK ] Reached target Network.
I have tried to put nomodeset as a kernel parameter but it does not work. Also, after reading ArchWiki, I have noticed that it is recommended to don't do this as I am using catalyst-utils-pxp because intel driver needs it so I have removed nomodeset parameter from kernel but It continues not working.
Any ideas?
Package versions:
Kernel version 3.17.6-1-ARCH
catalyst-hook 14.12-1
catalyst-utils-pxp 14.12-1
lib32-catalyst-utils-pxp 14.12-1
xorg-server 1.16.2.901-1
xf86-video-intel 2.99.916-3
Last edited by toni (2014-12-13 19:38:38)

FInally I managed to boot arch linux.
I had to downgrade xorg-server from 1.16.2.901-1 to 1.15.2-1.
It seems there is a problem with Catalyst 14.12-1 and xorg-server 1.16.2.901-1.
Also I had to replace desktop manager from gdm to lightdm as gdm raises segmentation faults using xorg-server versions 1.16.2.901-1 and 1.15.2-1.
Finally I had to add an entry in pacman.conf:
[xorg115]
Server = http://catalyst.wirephire.com/repo/xorg115/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/xorg115/$arch
#Server = http://mirror.hactar.bz/Vi0L0/xorg115/$arch
Then performs following actions:
1) # pacman -Syuu catalyst-hook catalyst-utils-pxp
2) Uninstall all the packages xf86* such as xf86-video-intel, xf86-input-evdev, xf86-input-synaptics, etc.
3) Install the packages uninstalled in step 2 and install them again using xorg115 repo, for example, # pacman -S xorg115/xf86-video-intel xorg115/xf86-input-evdev xorg115/xf86-input-synaptics
I have put a comment here.
Last edited by toni (2014-12-14 12:31:29)

Satellite L850 PSKACA: Win 8 AMD Catalyst Manager & Control Center instal

Satellite L850 PSKACA-03S011
Hi There
After installing Windows8 pro upgrade I have the following issue and not sure how to fix this
Was said I had to reinstall in windows 8
AMD CATALYST INSTALL MANAGER & ATI CATALYST CONTROL CENTRE
I need the info how to install these drivers AND LINK TO THE CORRECT DRIVERS TO DOWNLOAD
Please if someone can help
Tks Gill

Hmm it seems that just few Win 8 drivers are released for this unit.
Ive got another idea.
Win 8 supports and provides an own repair and fix options.
Here an useful and interesting information:
+Windows 8 Recovery & Repair+
http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
There are different ways to recover or repair a PC which are:
1. Refresh
2. Reset
3. Recovering using a recovery media
4. System Image Recovery
5. System Restore
6. Automatic Repair
7. Command Line
I would recommend trying the first option called *Refresh:*
The "Refresh" option is primarily a repair method. It is a great method of returning your PC to a known good state while preserving your files and a great deal of your configuration. With the "Refresh your PC" option, user accounts, data files, and some settings are preserved on your PC without the need to create a backup, or make choices about what to keep or remove

AMD Catalyst Install

completed loading Windows 8 program but lost AMD Catalyst

Hey Robert,
You can download the Catalyst program off AMDs website. Here is a link to the download section on AMD: http://support.amd.com/us/gpudownload/Pages/index.aspx
There is a link on the right hand side for AMD Catalyst. Just pick if your using 64 or 32bit Windows.
Best of luck!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

I am currently in the process of installing the latest AMD Video Drivers for Windows 8.1 (64-bit) on a Bootcamp partition. I previously had three ATI Radeon HD2600XT Graphics cards (in CrossFire) installed in a 2008 Apple Mac Pro.
I've run into several problems with trying to remove the Radeon HD2600XT graphics cards and install the latest drivers (for the Radeon R9 290 graphics card) in Windows 8.1 (64-bit), so I am creating this to be used as tutorial for others experiencing similar problems.
1) First I created a new/clean system restore point in Windows 8.1 prior to starting this.
      Instructions can be found here: http://www.intowindows.com/how-to-create-restore-point-in-windows-8-1/
2) Second, I manually tried removing/uninstalling the AMD Software from add/remove programs in Windows 8.1 (Control Panel)
      In Computer Control Panel, select "uninstall a program"
      Select AMD Install Manager (and any Catalyst Software) and remove/uninstall the software (choose "express uninstall all AMD software").
      Be sure to uninstall the AMD Install Manager.
3) In my system, the hardware drivers for the three Radeon XT2600 graphics cards were not properly removed, and the drivers for the Radeon R9 290 were not properly installed.
4) I tried running the AMD Driver Autodetect Tool
      It stated "We were unable to find your product or OS" (and failed to download or install any drivers)
      AMD Driver Autodetect displayed the following information:
Graphics hardware: 0x1002 - 0x9588 PCIE
Operating system: Windows 8.1 64-bit
5) Since the latest software/drivers were not found with the AMD Driver Autodetect, I decided to manually download the latest Graphics card drivers from the AMD website for my graphics card and for my operating system (Windows 8.1 64-bit). I created a folder called "C:\Drivers\AMD" and downloaded the latest AMD Graphics card drivers (Catalyst Software Suite 14.9) to that folder and unzipped the AMD drivers installation file. I unzipped the file which included the following drivers/files:
      Catalyst Software Suite 14.9 includes the following files:
            AMD Display Driver ver. 14.301.1001
                          OpenCL(tm) Driver
                          Catalyst Control Center
                          HydraVision
6) I downloaded and unzipped DDU v13.5.1.3 (downloaded from 3D Guru)
    I created a folder called "C:\Drivers\DDUv13.5.1.3" and unzipped the DDU installation files to that folder
7) I ran DDU v13.5.1.3 (downloaded from 3D Guru)
      It displayed the following information:
DDU Version:13.5.1.3
GPU # 0000 Detected : ATI Radeon HD 2600 XT (Microsoft Corporation - WDDM v1.1)
GPU DeviceId : pci\ven_1002&dev_9588
Detected Driver(s) Version(s) : 8.97.10.6
INF : oem55.inf
INF Section : ati2mtag_RV630
GPU # 0001 Detected : ATI Radeon HD 2600 XT (Microsoft Corporation - WDDM v1.1)
GPU DeviceId : pci\ven_1002&dev_9588
Detected Driver(s) Version(s) : 8.97.10.6
INF : oem55.inf
INF Section : ati2mtag_RV630
GPU # 0002 Detected : AMD Radeon R9 200 Series
GPU DeviceId : pci\ven_1002&dev_67b1
Detected Driver(s) Version(s) : 13.251.9001.1001
INF : oem63.inf
INF Section : ati2mtag_Hawaii
5) Based on the output above, it seems that some extremely old drivers are currently installed (v13.251.9001.1001), and I need to remove the old drivers for the hardware above, and try to install the latest AMD drivers (v14.9)
6) I rebooted the computer into Windows 8.1 "Safe Mode".
    Instructions can be found here: http://www.7tutorials.com/5-ways-boot-safe-mode-windows-8-windows-81
7) I went to the folder called "C:\Drivers\DDUv13.5.1.3" and ran DDU v13.5.1.3 and selected "Clean and restart" (in DDU 13.5.1.3) to remove ALL of the existing AMD drivers and to restart/reboot the computer.
- After removing the current display drivers (in safe mode) with DDU v13.5.1.3 and after the system rebooted, I then tried to perform a "clean install" of the latest AMD drivers (v14.9)
8) Now perform a "Clean Install" of the new AMD graphics drivers. Steps for performing a "clean install" (from AMD's website) are listed below:
To perform a 'clean install' of AMD graphics drivers:
You should make a system restore point before attempting, just in case
1. IMPORTANT: All Windows Updates should be current, including the 'optional/suggested' updates
2. IMPORTANT: Disable all anti-virus/ad blockers/anti-malware/ anti-anything before trying to install
3. IMPORTANT: Netframework is required and must be the latest version. (from Windows Update)
Download the drivers for your computer to the desktop. Follow steps 1-5 ( http://support.amd.com/en-us/download ).
Do not use 'auto-detect and install (it might not detect your graphics card or best drivers).
Delete existing drivers from your computer:
In computer control panel select 'uninstall a program'
For computers with Intel processors:
Select AMD install manager and choose 'express uninstall all AMD software'
Including the install manager.
For computers with AMD processors:
Select AMD install manager and 'custom uninstall' the graphics drivers and CCC only.
Reboot into 'safe mode'
In safe mode run Guru 3D's DDU
Reboot
Install the new driver suite.
9) I went to the folder called "C:\Drivers\AMD\AMD-Catalyst-14-9-win7-win8.1-64Bit-dd-ccc-whql" and ran setup.exe (Catalyst Install Manager)
     I selected "Express Install" as the default installation (highly recommended).
10) Rebooted the system after the Catalyst software and video driver installation.

In the end, I found out that the latest/newest Radeon drivers do not support the older Apple Radeon 2600XT graphics cards, so I was forced to remove the older Radeon 2600XT graphics cards from the system (so the newest/latest Radeon Catalyst Drivers would work). I was then able to boot directly into Windows 8.1 Pro, and the AMD Catalyst software and AMD Catalyst Drivers worked perfectly with the R9 290 graphics card (in Windows 8.1 Pro).
The only problem is that the AMD R9 290 is not supported in OS X, and now I can't boot directly into OS X because the Apple OS X graphics card drivers are missing and don't exist. Apple hasn't added AMD R9 290 graphics card support to the latest version of Apple OS X 10.10 Yosemite (or 10.9).
I posted a thread here about needing the AMD R9 290 graphics display drivers, but Apple still hasn't added the latest AMD Radeon R9 290 graphics card drivers support to the latest Apple Mac OS X 10.10.1 Yosemite operating system.
Another big Apple fail!
So now we have a wonderful new high-end AMD R9 290 graphics card and all we can do is use our Apple Mac Pro computers as Windows 8.1 Pro computers, because Apple has not updated their Apple OS X operating system to support the newest/latest AMD R9 290 graphics cards. (So we're stuck with using our Apple Mac Pro as a Windows 8.1 Pro computer) because Apple refuses to add the newest/latest hardware drivers to their latest Apple OS X operating system. Anytime you purchase an Apple computer you are stuck using really old hardware because Apple fails to update their operating system with the newest/latest hardware drivers for the latest AMD R9 290 graphics card hardware.
The only way to use the latest/newest hardware is with a Microsoft Windows 8.1 Pro computer. Hopefully Apple will get this fixed immediately, but it's already been close to a year now and Apple still hasn't fixed the problem.
We tried to contact Sapphire, and AMD, but both of them have said that it's a problem with Apple's Mac OS X operating system, and that only Apple can fix the problem and add the proper hardware drivers to their operating system.

Problem installing AMD Catalyst

Similar Messages

Maybe you are looking for