Problem installing stuff from software pack N95, m...

Hi,
I bought a Nokia N95 few days ago.
I have success fully installed PC suite.
But,
when I try to install stuff from the "Software Pack CD" it gives me error about missing "MSVCR80.dll".
Can some one tell me how to fix.
I went back to the shop and got the CD changed, but it didn't help.
Also please tell me how can I use Navigation on N95. Do I have to buy the liscence from nokia or there is some other way.

Hi lafanter
Is your Windows NET 2.0 or 3.0 Framework OK?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Problems Installing Adobe CS2 software

    Hi,
    I purchased my iMac aswell as Adobe CS2 software back in September. I started installing the CS2 software (4 discs) and by the last disc, installation froze and the drive sounded like it was in a continuous search on the disc. So I had to reboot and eject the disc. This continued for 2 more tries. I contacted Adobe and they said it was a disc problem, so I exchanged my CS2 for another CS2 disc set. I completely erased the previous CS2 applications, reinstalled OSX and tried again. This time it was the 2nd of 4 discs that just got skipped over - nothing even installed from that disc - the computer just spat it out and said: "disc 2 complete, please insert disc 3..."
    Anyone think I have drive or hardware issues???

    Hi Bushfire.
    I had a very similar problem when I installed CS 1 under OS X 10.3 on an iBook. In that case it turned out that the version of Stuffit Expander supplied with the OS was too old. (The stuffit engine is, I believe used to unpack some or all of the goodies from the installer). After upgrading Stuffit Expander to - I think to version 7 at the time - the install went perfectly.
    OS X 10.4 doesn't have any version of stuffit expander included with it at all. Have a look on versiontracker.com to download if you haven't allready got it. Could be worth a try.
    I have subsequently installed CS 2 on my iMac G5, and everything went OK -so it CAN work.
    Good luck - and let me know if it works.
    Easybourne

  • I am having a problem installing the JDK Software. Please Help

    Please help I am Having trouble installing my JDK software. I tried to make a simple program saying Hello World and the program fails to work because it can not find my class.
    C:\Jfiles\DIR
    ILoveJava.java
    ILoveJava.class
    C:\Jfiles\Javac ILoveJava.java
    C:\Jfiles\Java ILoveJava
    Exception in thread "main" Java.lang.NoclassDeffounderror
    The Path seems to be set correctly because the Javac compiled.
    I have tried a number of different ClassPath Definitions like C:\JDK.14\Lib\Tools.jar and ClassPath=.;C:\JDK.14\Lib\Tools.jar and ClassPath=. and ClassPath=
    I made sure that the capitilization and the spelling was the same between the ILoveJava I specified in notepad and the program name.
    I am also having trouble with JBuilder, Eclispe and NetBeans with finding Classes.
    Another error that I received after I changed the ClassPath to ClassPath= .;C:\JDK1.4\bin\ was a
    nosuchmethod error, When I tried to run the program I made using Java ILoveJava.
    Is their any other problem like a conflict of some sort that could be causing this problem?
    Could the problem be anything besides the ClassPath and Path Settings?
    Please, help me? I really, really, need to learn Java. Thank You.
    Java -Version
    Java Version 1.4.2.
    Windows XP

    Hi all,
    Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
    I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
    When I compile using "javac" I get an error saying "javac" is not recognised.
    When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
    Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
    I have removed all previous references to java in the registry editor.
    Please help !
    Regards,
    Vipul

  • Administrator problems installing 3rd part software

    I have an iMac G5 running Mac OSX (10.5.2). I have installed some third party photo software (Olympus Master 2). If I try and update this software or the software for the connected Olympus camera from inside the software, it keeps giving me the following error: "To use this function administrator privileges are required. Log on as an administrator". I am the only administrator on this computer, and I am logged on, so I do not understand the problem. I have reconfirmed I have admin privileges. All other software on this computer generally asks for my admin password when I update it and everything is ok. Am I forgetting something? Does this look like an Apple problem or with Olympus software. Is there a work around?
    Thanks
    --bbarclay

    Hi BBarclay-
    Greetings and welcome to the Apple boards
    I am not so sure that software is compatible with 10.5.x. Does Olympus have anything on their site referencing this?
    If you use iPhoto you probably won't need Olympus Master 2.
    Luck-
    -DaddyPaycheck

  • Problems installing third party software on Mountain Lion.

    I received message "Your security preferences allow installation of only apps from the Mac App Store and identified developers."  Where is this security setting so I can change it to be able to install third party software? "
    Thank you in advance.

    Open the Security & Privacy preferences. Click on the General tab. At the bottom you will find your Gatekeeper settings. Click on the lock icon and authenticate so you can change the selection. If software does not have a developer's signature in it then the software will not be installed until you change the selection to "Anywhere."

  • Problem installing Mavericks from my recovery partition of my computer

    I don't know what's going on but for some reason each and every time I try to install mavericks from my recovery partition I get an error saying "OSX Mavericks failed to download" , then the text underneath that said "Use the purchases page to try again". This creates a problem for me because I can not access the Mac AppStore since I whipped my MacBook clean with the os along with it and am trying to clean install mavericks. So I was wondering how do I fix this because I am beginning to get extremely ****** off and frustrated.

    Hi
    I want to install mac osx Mavericks on a  seagate internal raw hard . I downloaded "RecoveryDiskAssistant" and install it in a usb drive, before installing I made partition for new harddisk , and I stadted to install it through internet without problem,
    But after 10% it says: ""Use the purchases page to try again"" . and after clicking okey it`s installing bar doesnt go forward(Most comments which I found was about app strore but in this step I have no access to app store) . could you please help me what to do?

  • Problem installing 0SALES_UNIT from Business Content

    Dear Friends,
    I have tried to install 0SALES_UNIT from the business content but it does not appear under the InfoObjects tab.
    What could be the problem?
    When i try to install it, the system shows that an active version of the object already exists. I have tried to install it inspite of the existing active version and also get a green signal. Thanks for all the help in advance.
    Raj

    Raj,
    Here is the solution to this problem.
    You have successfully activated the infoObject but do not see it under the infoObject list. This happens due to inconsistencies in the RSDIOBCIOBJ table. To solve this error, go to SE37 and execute the RSDG_IOBC_REORG function module. Put in the following parameters.
    I_IOBJVERS -
    >  A
    I_PROGRESS -
    > 
    I_IOBJTP   -
    >  *
    I_ALL_IOBJ -
    >  X
    I_T_IOBJNM -
    > 
    I_BYPASS_BUFFER-->
    Press F8 to execute.
    Then go to RSA1 and you should find your infoObject.
    Don't forget to assign points!!!
    Abdul

  • How to hide installed application from Software Center 2012

    Hello,
    I would like to ask you whether it is possible in Software Center 2012 to remove the record of program that was installed successfully from application catalog.
    Currently it stays visible in SC as "Available" constantly informing users with popup that there is new software available for installation. This may be disturbing behavior for users.
    Technical specialist in our company would be very glad to know some workaround. Is there some xml file or registry on user computer that could be used to remove such record from Software Center 2012?
    Thank you very much for any advice!

    Hi,
    There is a related setting in Client Setting - Show notifications for new deployments.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Problem installing ArchLinux from hdd partition

    I have a SATA drive mounted on a VIA Epia motherboard, but no CD drive, which is why I install directly from hdd.
    Currently I have Zenwalk running, which only has Lilo (no grub even in the repos!!!). I copied to contents of the install ISO to a new ext3 partition and used the following entry in lilo (taken from this guide):
    image=/root/tmp/isolinux/vmlinuz
    label=ArchInstall
    initrd=/root/tmp/isolinux/initrd.img
    append="root=/dev/sda4 BOOTMEDIA=cd"
    But it doesn't boot properly. It says:
    ::Initramfs Completed - control passing to kinit
    IP-config: no devices to configure
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    kinit: Mounted root (ext3 filesystem) readonly.
    kinit: init not found!
    Kernel panic - not syncing: Attempted to kill init
    ..and before all that it complains that it doesn't find anything new in /config and /packages, but these directories aren't suppose to exist, I guess, because they don't on the original iso?
    Anyways, it looks like it's mounting /dev/sda4, but then dies because the init part isn't found. I had a problem with lilo warning me that the init ram image was too large, but then I added the "large-memory" option to lilo.conf and it stopped complaining.
    Thanks for reading,
    Benjamin

    I found a solution!
    Aparently syslinux is very good for booting anything made with isolinux. I think it's pretty universal. So what you do is simply to mount the iso, copy the contents to a fat 16 partition, rename the isolinux.cfg to syslinux.cfg and then run syslinux on the partition. It's described on this blog:
    http://www.elfenbeinturm.cc/2007/08/09/ … kpad-x60s/
    / Benjamin

  • Install stuffs from source

    I try to install mplayer from source, after it done i hit mplayer, command not found. After that i try to install tmsnc and its the same, command not found. I tried bsdsfv too, and there was an error:
    make: /usr/bin/install: Command not found
    make: *** [install] Error 127
    I install these progs from source always, and it was succes always.

    1.
    [~] > pacman -Qo /bin/install
    /bin/install is owned by coreutils 6.7-1
    2.
    Why the hell would you want to install mplayer from source? Arch often if not always has the newest stable (sometimes even unstable ) stuff in sensible yet reasonable tuned packages. It eludes me why you would want to compile mplayer yourself. If you need to, at least use ABS.
    Other than that I must ask the same question iBertus already asked: are you even running Arch? Perhaps Gentoo is more to your liking.

  • I had a problem installing Safari from my install disc

    Hi,
    A few days ago I posted a message that the Safari download would not recognize that I had 10.5.5 on my machine, and someone suggested that I re-install it from the discs that came with it. I did install something but apparently not Safari. I don't want to open up the Leopard re-install because I don't need Leopard, I just want the Safari, so now what do I do?
    Thx

    Welcome To  Discussions SHRiley!
    Is this the Mac OS X 10.5.5 Combo Update. you are using?
    If not, download that.
    Run Repair Permissions.
    Install that Combo Update.
    Again run Repair Permissions.
    ali b

  • Problems Installing Envy D410 Software on my Macbook - OX Lion 7.5

    When I try to use the HP Installation Wizard - I get as far as the Installation Type screen and then I cant go any further.  The  blue "Install" button just flashes.
    Any suggestions?  It's driving me crazy!
    Thanks

    Hello @Hilsalive,
    Welcome to the HP Support Forums! I see you are trying to install your HP Envy 100 to your MacBook running the Lion 10.7.7 Operating system, you are using the HP Printer Installer Wizard however you keep getting an error. The reason this is happening is because the HP Printer Installer Wizard was designed for Windows users, it is not compatible with the Mac.
    Please go ahead and complete the steps listed below to get started:
    Scrub/ Uninstall
    • Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
    • Click continue, click on one of the printers in the list.
    • * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
    • Click uninstall.
    Reset Printing System
    1. Click the Apple icon (   ), and then click System Preferences.
    2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    3. Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    4. Click OK to confirm the reset.
    5. Type the correct Name and Password.
    6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
    Repair Disk Permissions
    1.On the Dock, click Applications, and then click Utilities.
    2.Double-click Disk Utility.
    3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    4.Click the Repair Disk Permissions button at the bottom of the window.
    5.Once the repair is complete, restart the computer.
    Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
    HP Full Feature Software and Drivers - OS X v10.7 Lion
    I hope this helps, please let me know the outcome!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Re-Installing iCal From Software Disk

    I'm trying to re-install iCal from my Leopard Disk, and I read all the discussions online that you use the "optional installs.mpkg" function. When I get to select an application to re-install, it won't let me choose anything. It's greyed out, and it says "skip" beside each application. So how can I re-install iCal?

    Use Pacifist to extract it manually, and then rerun all applicable updates.
    (50417)

  • Problem installing third party software

    I have encountered an issue whereby on trying to install downloaded upgrades to third party software I am asked to insert a disk entitled with my user name. At first I put this down to dodgy software, but have now had the same issue with installing Adobe Acrobat Reader 9.0. The installation software appears to be something called iNosso.
    Essentially the installation gets as far as stating "This software was successfully installed" but before coming up with the summary window comes up with:
    *Please insert the "username" disc to*
    *continue installation.*
    You have chosen to install software that requires this
    disc.
    (username isn't actually shown what is shows is presumably the local name I have given to the computer).
    No such disc exists and have tried the original installation discs for 10.5 but to no avail. I end up force quitting the installer but am concerned that by doing so I may corrrupt the installation and build up problems for myself going forward.
    Has anyone else encountered this issue and if so is there a fix?
    Thanks in advance.

    Allan, I had hoped not to have to go through the steps you suggest as one of the reasons for doing Migration Assistant was to avoid re-installing all my applications and all the relevant license information. Also note that my old apps are running fine it is just third party installers that appear to be the issue. As a test I ran the Apple installer loading some additional apps that came with the computer with no issues. I would also add that all my applications old and new appear to be running without issue. Indeed even those apps affected by this installation issue (incl Acrobat Reader 9.0) seem to run normally so it does appear to be an annoying glitch in the installation that simply stops the automatic completion of the process.
    My nervousness however is that something more sinister is going on in the background that I am not aware of that may affect the performance of the computer going forward.
    However from both yours and Barry's comments it would appear that this is not a common fault therefore is likely to be peculiar to the way I have set things up so in order to resolve I will have to try either re-installation of everything per Barry or a re-installation of apps as you suggest. Now I just need someone to find me the time!!
    If anyone else has come across this issue before and found an easier resolution I would be eternally grateful. Thank you Allan and Barry for the speed of your responses and your suggestions.

  • Problem installing multi-disc software

    I've got a 15" Macbook Pro running Leopard (10.5.2) and Bootcamp with Windows XP. I use the windows partition primarily for PC games. Games that have a single disk (e.g., Half-Life) install and run just fine. I am having trouble installing games that come on more than one disc though (e.g., Call of Duty). I put Disc 1 in and the installation begins. It then asks me to eject Disc 1, put in Disc 2 and hit "OK". I do this and the installation hangs. If I go to the Windows task manager it says the Installation program is "not responding". This has been a problem with multiple games.
    I got around this problem with one game by copying the entire contents of the 2nd CD to the hard drive and then directing the installation program to the files. But with Call of Duty it doesn't give me and option to tell it where the files are, it just says hit "OK" so I don't think this same approach will work.
    Suggestions? Thanks!

    Autorun.exe is a Windows/PC executable, not a Mac OS X file. You cannot run .exe files in Mac OS X.
    Generally the installer will ask for any additional discs required. If none were requested during the normal installation, then the other discs aren't required for the Mac installation. This should all be explained in the installation or user guide that came with the software. However, if you feel you are having an installation problem then you need to contact the software developer for assistance. These discussions do not provide support for third-party products.
    HAPPY HOLIDAYS!
    Kappy
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Maybe you are looking for