Problem making package

i'm trying to make this little password manager program i like to use, but it keeps failing and i can't figure out what i'm doing wrong. as far as i can tell, everything is the same as other package builds i've seen. here's the pkgbuild:
pkgname=gpasman
pkgver=1.3.0
pkgrel=1
pkgdesc="a gtk personal password manager"
url="http://gpasman.sourceforge.net"
license=""
depends=()
makedepends=()
conflicts=()
replaces=()
backup=()
install=
source=(http://gpasman.sourceforge.net/files/gpasman-1.3.0.tar.gz)
md5sums=()
build() {
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=/usr
make || return 1
make prefix=$startdir/pkg/usr install
[3] root:/var/abs/local/gpasman # makepkg
==> Making package: gpasman (Mon Aug 9 11:46:25 EDT 2004)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Using local copy of gpasman-1.3.0.tar.gz
==> WARNING: MD5sums are missing or incomplete. Cannot verify source integrity.
==> Extracting Sources...
==> tar --use-compress-program=gzip -xf gpasman-1.3.0.tar.gz
==> Removing existing pkg/ directory...
==> Starting build()...
loading cache ./config.cache
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -march=i686 -O2 -pipe ) works... yes
checking whether the C compiler (gcc -march=i686 -O2 -pipe ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for a BSD compatible install... (cached) /bin/install -c
checking for strip... (cached) /usr/bin/strip
checking for gtk-config... (cached) /usr/bin/gtk-config
checking whether byte ordering is bigendian... (cached) no
checking how to run the C preprocessor... (cached) gcc -E
checking for ANSI C header files... (cached) yes
checking for unistd.h... (cached) yes
checking for working const... (cached) yes
checking for mode_t... (cached) yes
creating ./config.status
creating Makefile
creating src/Makefile
creating src/config.h
src/config.h is unchanged
make[1]: Entering directory `/var/abs/local/gpasman/src/gpasman-1.3.0/src'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/var/abs/local/gpasman/src/gpasman-1.3.0/src'
make[1]: Entering directory `/var/abs/local/gpasman/src/gpasman-1.3.0/src'
/usr/bin/strip gpasman
/bin/install -c -s -m 755 ./gpasman /var/abs/local/gpasman/pkg/usr/bin/gpasman
/bin/install: cannot create regular file `/var/abs/local/gpasman/pkg/usr/bin/gpasman': No such file or directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/var/abs/local/gpasman/src/gpasman-1.3.0/src'
make: *** [install] Error 2
==> ERROR: Build Failed. Aborting...
btw, the program compiles and installs fine if i do the ./configure make make install from my user directory.
any ideas?

slackhack wrote:
i'm trying to make this little password manager program i like to use, but it keeps failing and i can't figure out what i'm doing wrong. as far as i can tell, everything is the same as other package builds i've seen. here's the pkgbuild:
pkgname=gpasman
pkgver=1.3.0
pkgrel=1
pkgdesc="a gtk personal password manager"
url="http://gpasman.sourceforge.net"
license=""
depends=()
makedepends=()
conflicts=()
replaces=()
backup=()
install=
source=(http://gpasman.sourceforge.net/files/gpasman-1.3.0.tar.gz)
md5sums=()
build() {
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=/usr
make || return 1
make prefix=$startdir/pkg/usr install
[3] root:/var/abs/local/gpasman # makepkg
==> Making package: gpasman (Mon Aug 9 11:46:25 EDT 2004)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Using local copy of gpasman-1.3.0.tar.gz
==> WARNING: MD5sums are missing or incomplete. Cannot verify source integrity.
==> Extracting Sources...
==> tar --use-compress-program=gzip -xf gpasman-1.3.0.tar.gz
==> Removing existing pkg/ directory...
==> Starting build()...
loading cache ./config.cache
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -march=i686 -O2 -pipe ) works... yes
checking whether the C compiler (gcc -march=i686 -O2 -pipe ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for a BSD compatible install... (cached) /bin/install -c
checking for strip... (cached) /usr/bin/strip
checking for gtk-config... (cached) /usr/bin/gtk-config
checking whether byte ordering is bigendian... (cached) no
checking how to run the C preprocessor... (cached) gcc -E
checking for ANSI C header files... (cached) yes
checking for unistd.h... (cached) yes
checking for working const... (cached) yes
checking for mode_t... (cached) yes
creating ./config.status
creating Makefile
creating src/Makefile
creating src/config.h
src/config.h is unchanged
make[1]: Entering directory `/var/abs/local/gpasman/src/gpasman-1.3.0/src'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/var/abs/local/gpasman/src/gpasman-1.3.0/src'
make[1]: Entering directory `/var/abs/local/gpasman/src/gpasman-1.3.0/src'
/usr/bin/strip gpasman
/bin/install -c -s -m 755 ./gpasman /var/abs/local/gpasman/pkg/usr/bin/gpasman
/bin/install: cannot create regular file `/var/abs/local/gpasman/pkg/usr/bin/gpasman': No such file or directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/var/abs/local/gpasman/src/gpasman-1.3.0/src'
make: *** [install] Error 2
==> ERROR: Build Failed. Aborting...
btw, the program compiles and installs fine if i do the ./configure make make install from my user directory.
any ideas?
Have you tried to build it manual, without makepkg?

Similar Messages

Problem making/receiving/disconnecting calls and p...

I was looking for a new phone to replace my old Samsung Star, but I was unable to justify this expense. So, I saw Nokia Lumia 710 with it's GPS software and hardware as part of the package. Windows phone looks so beautiful that I just bought it last march, 23th.
Now, verifying this forum I realize that my problem, some how, exists since January in Europe. As many people here I have problems to end a call, but in my case the call never completes and when I try to disconnect Lumia just does nothing beyond show "disconnecting" forever. The only way to recover control is turning Lumia off.
Its true that my carrier has a very weak signal where I live (at my apartment), but my old Samsung at least make and receive calls. Some times I must move near to the window to have a better reception, but works. With Lumia, different from what I was expecting (a premium Nokia quality signal - the best possible reception), some times just do not work! Some times people calls me and the phone do not ring. Some times I receive that screen offering me the opportunity to send a message like "I'm at a meeting" or something like that, but I do not have the opportunity to receive that call. This is very frequent since I bought this Nokia. Some times, when I make a call, Lumia pretend to call, pretend that the other person is connected, but, in fact, there is no calling sound. The phone remains mute all the time, there are no call. When I give up, I press "disconnect" and Lumia shows "disconnecting" but nothing happens. To recover phone control I must turn it off to try again. Once I was so angry that I press many buttons and Lumia freezes up completely and was needed to remove battery to turn off.
About GPS, that was my main excuse to expend a lot of money on a new phone: Nokia Lumia GPS is disappointing. Lumia GPS looks like loose satellite signals very frequently. I decided to make a comparison between my Lumia and my wife's iPad. Working totally offline, side by side at my wife's lap, while iPad was able to show immediately every turn I make, Lumia takes long time to realize that. In fact, most of time, Lumia just realize that I turn when I was reaching next corner. I'm using Nokia drive 2 and, in this test, since I don’t have a GPS software at iPad, I just leave Lumia and iPad with the map showing our position. I do not set a destination.
Finally, my last disappointment is about windows Phone and the “one account policy”. Really? They think people will be happy to give up from their messenger accounts or Xbox accounts to use Windows Phone? When I turn on my Lumia for the first time it asks me to enter or create a Microsoft account. I think about and I realize that I don’t want to add payment information to my very old Hotmail/messenger account, so, I create a new one. My mistake because soon I discover that Windows Phone do not let me choose a different account for Messenger or Xbox.
I call Nokia in Brazil to find a solution for my two main problems: making/receiving calls and the GPS performance. The only solution they can think about was reset my phone. I do that a few hours ago. This time I choose to enter my Messenger account to be able to chat with my friends, but, of course, I loose my Xbox id created with the other account.
“One account policy” is so “not smart” that is very hard to understand why they do that. The need to reset the device to choose another account is unbelievable. Mean while, with iPhone/iPad, to change accounts is so easy…
I will test my phone for the next few days to verify if reset solve all my problems, but right now I’m very disappointed.
(I hope you can understand my poor english).

Reset Lumia 710 do not solved my problem. I was forced to send the device to technical support. Even if they was unable to reproduce the problems I faced at home, they did a flash reset (or something) and now my phone always ring when people call and I can end calls without a problem. For now those problems disappeared.

Problem with packageing and deploying a sample application

HI,
I have tried to download and install the server in my system. I am able to deploy a sample application using autodeploy utility.
But when i tried to package a new sample application and deploy i am getting 404 error. For application server i have used 7070 port and not the default 8080 port will this a problem to package & deploy sample application provided with this software.
The error is as below:
HTTP Status 404 - /hello1
type Status report
message /hello1
description The requested resource (/hello1) is not available.
Sun-Java-System/Application-Server

Btw, verify that the url you are trying to access is correct. For instance, assuming you deploy app. without --contextroot option. By default, the url is http://<host>:<port>/<web module name>/<value of url-pattern in web.xml> if your app contains servlet. If your app has jsp then it's http://<host>:<port>/<web module name>/<value of url-pattern in web.xml>/<name of jsp>

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114957)

Problem with packages, part duex

Solaris 11 x86 under VBox
Continuing from problem adding packages
I got the mechanics of adding packages working and successfully installed the packages for x11 support. Next I need to add some packages to install Oracle database. Packages are listed in the database Installation Guide.
First, check to see if the required packages are already installed:
root@vbsolsrv02:~# pkginfo -i SUNWarc SUNWbtool SUNWhea SUNWlibC SUNWlibms SUNWsprot   SUNWtoo SUNWi1of SUNWi1cs SUNWi15cs SUNWxwfnt
system      SUNWarc   Lint Libraries (usr)
system      SUNWbtool CCS tools bundled with SunOS
system      SUNWhea   SunOS Header Files
system      SUNWlibC Sun Workshop Compilers Bundled libC
system      SUNWlibms Math & Microtasking Libraries (Usr)
system      SUNWsprot Solaris Bundled tools
system      SUNWtoo   Programming Tools
ERROR: information for "SUNWi1of" was not found
ERROR: information for "SUNWi1cs" was not found
ERROR: information for "SUNWi15cs" was not found
ERROR: information for "SUNWxwfnt" was not found
Not being familiar with the interpretation of the error msgs (or much else with Solaris) I figured it wouldn't hurt to just try to install them.
root@vbsolsrv02:~# pkg install SUNWi1of
pkg install: The following pattern(s) did not match any allowable packages. Try
using a different matching pattern, or refreshing publisher information:
        SUNWi1of
root@vbsolsrv02:~# pkg install SUNWi1cs
No updates necessary for this image.
root@vbsolsrv02:~# pkg install SUNWi15cs
No updates necessary for this image.
root@vbsolsrv02:~# pkg install SUNWxwfnt
pkg install: The following pattern(s) did not match any allowable packages. Try
using a different matching pattern, or refreshing publisher information:
        SUNWxwfnt
root@vbsolsrv02:~#
at this point, repeating the pkginfo command produced exactly the same results as before.
So, what am I to learn from this and how should I proceed from here?

PascalKreyer-Oracle wrote:
These packages are requirement for Solaris 10. As these packages are not available for Solaris 11, please check again in the database installation guide to determine which packages are really necessary.
Ah, the devil is always in the fine print. I am planning on installing Oracle 11.2, so from the Database Quick Installation Guide
11g Release 2 (11.2) for Oracle Solaris on x86-64, the packages were listed under this statement:
The following packages (or later versions) are required for Oracle Database 11g Release 2 (11.2) on Oracle Solaris 10:
I overlooked the proviso "on Oracle Solaris 10". There was no separate listing for Solaris 11.
Also, going back and double checking the entire section on software requirements, I see that only Oracle 11.2.0.3 or later is supported on Solaris 11. So if I want to install Oracle 11.2.0.1, I'll need to drop back to solaris 10.
Thanks for the focus.

Problem importing packages...

hello!
I am learning Java for a while. I have a very strange problem with packages. The problem is the next one:
When I import the complete package like this:
import ThePackage.*
I got the following the next errors:
main.java:8: cannot resolve symbol
symbol : constructor Class1 ()
location: class Class1
Class1 C1=new Class1();
^
main.java:9: cannot resolve symbol
symbol : constructor Class2 ()
location: class Class2
Class2 C2=new Class2();
^
2 errors
In order to use this packages, I have to use it this way:
import ThePackage.Class1;
import ThePackage.Class2;
My question is if I have to import every class I am going to use per package? Or why I can�t import using asterisks ('*')
My other problem is when I use class within the same package, I have to import them too. I have to put the "import ThePackage.*;" in every class within it.
Thanks,
Santiago (A Java Newbie)

You can try to compile with javac -verbose and see what happens. It's because the class you want to compile is not in a package, and you want to import a whole package. But how would the compiler know if you want to use the Class1 and Class2 that is not in a package or those that are in a package?! First it checks if there are those classes which are not in a package. It doesn't find them, but it finds the java source code, so it attempts to use that (which will fail becuase you have package declaration in them). So sudha_mp is right about that you have to remove the source code, then you should be able to compile your code (or the class you want to compile has to be in a package).

I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of

I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of session and I take 3 weeks or more with this problem if they can support me solve it was the number of seire wearing this being installed at a private university

Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page

Anyone else having problems making a hyperlink to a file in CS4?

Anyone else having problems making a hyperlink to a file?
I have a document in CS4 that I'm exporting to pdf. When I create a hyperlink in CS4 to a file, I am getting the message when I click the link in the pdf ' Cannot find the file:C%5Document' etc.
When creating the link, File is selected, Shared Destination is unchecked & checking the link using 'Go to Destination' shows the link works.
In Acrobat 9 Pro, I've checked the properties of the link - when exported from CS4, the Link Properties - Actions are 'Open a web link' 'file:C:\Documents%20'etc whereas if the link is created in Acrobat the link properties are ' 'Open a file' 'file:C\Documents and Settings' etc, and it works.
Is this a bug or am I missing something?

I'm only getting that to work with the catalogue & sample in the same folder. In any case from a useability standpoint using URL brings up the Security Warning & putting the catalogue pdf in the same folder as 100 sample pdfs makes it more difficult to locate.
I'm at a loss to understand why the functionality of creating a link in InDesign cannot be the same as Acrobat; where you can select 'Open a file', browse to that file and the relative links are maintained when you burn to a disc. InDesign looks as if it will do the same but when you select File as the link & browse to the destination file but InDesign treats it as a URL & brings up the the web link cursor in the finished pdf. That still looks like a bug to me.

Having problems adding packages

I downloaded the Solaris (Sparc) companion CD's Dependency Package. It contains 14 or so files that I think should be patches. I run "pkgadd -d . " from my directory where they are and it says their are no packages to add.
http://www.sun.com/software/solaris/freeware/pkgs_download.html#bundle
Is where I got the package from.
I have re-downloaded it like 5 times. I am running Solaris 9 on a Ultra 5. I have not had any problems adding packages before. The packages that I am trying to add are in thier own slice and I have a lot of room on my disks.

I think I am having an ID10T error.
I didn't realize the paths that I was giving it were incorrect.

Problem making playlists with new Zen Style 300

/Problem making playlists with new Zen Style 300hI follow this procedure from the support page:
http://support.creative.com/kb/ShowArticle.aspx?sid=804
I also have tried many other options and procedures, but each time the playlist that ends up on the player has only a few of the songs that I put on the play list. all the songs do exist on the player, but seems to randomly select only a small subset of the songs - example: 6 original, 2 get on the list, 30 on teh original, 6 get on the player's play list.
The odd part is if I go back to the player at some later time and connect via creative central, the correct playlist displays on the PC. However, is still wrong (truncated) on the player. So it seems to remember the correct play list, but just does not display correctly on the player.
PC OS - win7
creative centrale version .8.03
zen style 300 sw version: .0.07
Anyone get this to work on the zen style 300?
Norm

?After many attempts? (like 6) with creative support to convince them this was a software bug, the end state response was to send the player back. Using better judgement, I waited for a new software release and indeed the problem was fixed in a subsequent release of the software.
My main frustration here was they seem to not want to escalate problems quickly to the right level of technical support that actually understands the software/debugging? vs hardware? and can look through a set of debugging steps and tests I sent in the first notes and realize it is not something hardware related. Even after citing my degrees in computer science/electrical engineering and having designed/debugged systems much more complex than this, all I got was simple procedural steps to repeat or send it back, it is a hardware problem. Ug!

I continuously have a problem making calls where I have to activate then cancel the speaker phone button. Normally happens when calling landline phones but sometimes mobile. Any fixes?

I continuously have problems making calls from my iphone 4S. When I place a call and press send, you hear nothing until I turn on and off the speaker button and then you hear the ring tone or the person answering. This happens normally on land line calls but does occur when calling mobile phones somethimes. Is this a common problem or is there a fix for it? Thanks

I am having the same problem. Usually happens after I make consecutive phone calls.

CDR-03120: Internal Error - Problem making a repository connection

Hi,
I'm running SCM 9.0.2.7 and get the following error message when I try to View Version History or View Version Events for any file in my workarea. Can anyone suggest a solution?
Thanks,
Rich
Message
CDR-03120: Internal Error - Problem making a repository connection
Cause
An internal Diff or Merge component has been
unable to make a repository connection.
Action
Contact your support representative.

Hi
I have same problem running RON 9.0.4.4
Any ideas ?
Thanks.

Problems making calls after upgrading to iOS7

Hi everyone. I'm stuck in a rut with this and I've called my service provider, but they weren't able to help me at all.
Anyway, so here's the situation: after upgrading to iOS7, I started having problems making outgoing calls. The voice prompt kept telling me to check my phone settings, and I did, but I didn't fine anything wrong with it. I tried to isolate the problem by transferring my SIM to another phone and it worked perfectly, which means it's really my iPhone that's acting up. I'm using an iPhone 4s, model A1387. modem firmware 5.0.00.
Hope someone can help me out with this...I use this phone for business transactions and it's essential that I get to have 100% full use of it.
Thanks.

I experience this problem too. I am using iPhone4 and just upgrade it to iOS7. And now I can not make outgoing call. I checked all the setting, and nothing wrong. I even replaced my sim card with the new one, still can not help.
I read this link
https://discussions.apple.com/thread/5322252
and I try dial *#31#, it help, but not permanent solution.

How do I send a rescue email? I also have problems making a rescue email

How do i send a rescue email? I also have problems making a rescue email!?

Hi JOFFERY,
Thanks for visiting Apple Support Communities.
If you need to add or change a rescue email on your Apple ID, see this article:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
Navigate to My Apple ID using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
All the best,
Jeremy

Having problem making purchases in game? Credit Card set up and previously made many purchases.

Having problem making purchases in game? Credit Card set up and previously made many purchases.

What happens when you try to buy them, does the 'buy' button not work, do you get any error messages ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Problem making package

Similar Messages

Maybe you are looking for