Problem mapping results with FM F4UT_RESULTS_MAP

Hi experts,
I have modified S_MAT1 search help adding a new tab to the search help. In particular, this new tab searchs by material long description.
The problem is that when I call to the function module F4UT_RESULTS_MAP my results are mixed up. Lines of material long text are sorted in internal table, so I expected that this function module maps from I_SEL to RECORD_TAB table.
How can I solved that?
CALL FUNCTION 'F4UT_RESULTS_MAP'
        TABLES
          shlp_tab          = shlp_tab
          record_tab        = record_tab
          source_tab        = i_sel
        CHANGING
          shlp              = shlp
          callcontrol       = callcontrol
        EXCEPTIONS
          illegal_structure = 1
          OTHERS            = 2.
Previously, I calculate the hit list using SELECT event from callcontrol-step, and saving values to I_SEL internal table.
Any help would be apreciated.
Lots of thanks,
Javier

Hi,
Check this link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/creatingaSearchhelpexit%28CRMobject%29
Regards
Adil

Similar Messages

Problem getting results with no unique key in a joined query

I created a descriptor to do a joined query, which generated a query in log as:
Select t0.empID,t1.empID, t1.phone from Emp t0, Phone t1
where t0.empId=t1.empId and t0.empId=1001
When I run it, I got the result as:
1001,1001,9999999
1001,1001,9999999
The correct result should be (I copy and paste the query from log into SQL-Plus):
1001,1001,9999999
1001,1001,1234455
I suspect this is caused by Toplink caching objects by primary key. I wonder if anybody has a solution for this.
My descriptor is created using WorkBench. Emp is the primary table, Phone as additional table linked by foreignKey empId.
The join is implemented by modifying the descriptor as the following:
ExpressionBuilder builder = new ExpressionBuilder();
descriptor.getQueryManage()
.setMultipleTableJoinExpression(
builder.getField("EMP.EMPID").equal(
builder.getField("EMP.EMPID")));
descriptor.disableCacheHits();
I'd really appreciate your help.

I am implementing a people search function. The batch reading is quite expensive if toplink does a read query for every person. A customized query requires only one database access, the other way may requires hundreds.
I don't want to use the cache either in this case because the database is also accessed by legacy system which cann't notify toplink any updates.
I opened a TAR on this and the solution I got is to use ReportQuery rathen than ReadAllQuery. The only problem here is that now I have to map the query result to my class manually.

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

What does problems were found with the partition map mean

Why is there a problem when I run my disk utility that says "problems were found with the partition map that which might prevent booting"? Why is there a problem????????

You have to repair your partition map. It's the most important part of the hard drive related to software, because if the partition map doesn't work, the whole hard drive is useless.
As you have OS X Lion, you should be able to repair it while OS X is started. Open Disk Utility (in /Applications/Utilities), choose your hard drive at the top of the sidebar, and press the button to repair the disk. What do you see in the blank box?
Also, after choosing the hard drive in Disk Utility, tell me the SMART status, at the bottom of the window. You may also want to check the Macintosh HD status

Text search returns results with some keywords, but not others

This pertains to a tours website for Turkey. I've sucessfully
set up a search form, and results page which returns results when
multiple keywords are entered. Everything is working well, except
when certain keywords are used. For example, the table column being
searched for is called long_itinerary, so if anyone is interested
in a certain site or city, it's bound to be in the long itinerary
somewhere.
Here's the problem, by example: When someone searches with
the keywords Antalya, Konya, Ankara, or Adana, for example, results
are returned from the database, and those keywords are in each
returned tour's long itinerary.
But certain keywords return nothing, even when they're in
practically all of the tours, in the long_itinerary column. For
example, Istanbul, Ephesus, and Izmir, Kusadasi and Pergamum return
no results, even though they're there. I've gone through all of the
most likely keywords, and these are the offenders. If, for example,
I search with "Istanbul Ankara," I get results with tours including
Ankara (and Istanbul, but only because the word "Ankara" is in the
itinerary).
First I made sure the Charset values were the same on the
search form page and the results page. Still had the problem. Next,
I went into the database itself, and copied the word "Istanbul"
directly from the long_itinerary column of the database, and pasted
it into the search function's text field, and searched again. Same
problem--no results returned.
I can't see any difference between the keywords which work
correctly, and those which don't, what baffles me is that even when
I copy a keyword directly from the database and paste it in the
search text field, it returns no results!
Well, I'm baffled! Any ideas what might cause this?

Hmm -- one of my customers is a turkish building company
(Kusadasi BTW), and when *they* add some contents to the DB,
they´ll be entering turkish chars. It´s in particular the
turkish "I" which is pretty different, and this is when a search
for keywords containing a western "I" will fail.
Could that be the problem in your case ?

Google Map Integration with Map Viewer is not working

Hi Team,
My MapViewer Version: Ver11_1_1_7_B130111
I have created a Google Map (with Type of Map Source as "Google Maps") in Oracle Map Viewer and i could see google map in Oracle Map Viewer(using "show Map").
I wanted to show a village map theme over the above google map in a web page and i am using Jdeveloper to integrate map viewer with Village data. I could see the google maps inside Jdeveloper however when i run the Jdeveloper code google map is not shown inside the web page.
I tried with Oracle Maps, Bing Maps as the "map source" in map viewer and tried integrating inside Jdeveloper and got same result (blank screen). However when i tried a different mapviewer ( Base Map ELOCATION.WORLD_MAP from OracleFMW MapViewer Home ) i could see the map in the web page.
I could get all other base maps (created with "internal" as the map source") in the web page, so there is some thing that i am missing with Google Maps, Bing Maps, Oracle Maps. Could you please help me what is that i am missing or point to a help resource?
Thanks
Nag

Hi Jayanth,
Issue is solved after creating the web page using latest JDeveloper (11.1.2.4). Thanks a lot for your help
With Regards
Nag

Problem mapping USB external drive connected to Airport Extreme on my PC

I am having a problem mapping my USB external drive in my PC running WIndows Vista. Here is what I have so far:
USB External Drive connected to my AirPort Extreme which is connected to my Century Link modem/router.
I have installed the USB drive using the Airport Utility. In the Disks section the Enable File Sharing is checked, Secure Shared Disks is set to With a Disk Password, I have entered the password in the next 2 rows, and finally AirPort Disks Gues Access is set to Not Allowed. The section below named These Settings Configure Windows File Sharing is empty. Am I supposed to put something here?
I was also told I need to map the drive in my PC, but when I go to do that via the Computer and the Map Network Drive, I get stuck where it asks me to enter a folder name. I read many of the posts which tell me I need to enter among other things the disk's ip address, but I am unable to find it anywhere. Where do I find what to put here?
Can someone please help this frustrated user?

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

Problems Creating Mappings with Collections with tools or workbench

Hi -
I am a new kodo user for my company. And am having a few problems in genereal with mapping objects with collections
in them.
I followed the tutorial on how to use the kodo workbench
using the Passenger example. Build the java code and then
tried to creat a new set of metadata. After going through
this process I expected to see TWO tables. Something like
'PAssenger' and something like 'Luggage' where luggage
would be joined to passenger. However what I am getting
is ONE table passenger with a BLOB field 'Luggage'. This
has been a contant problem with me with any composite
java class containing collection. Obviously I am configuring something wrong. Any help would be great.
Thanks
Matt

Answered by one of my fellow and unknown colleagues that suddenly entered the room

E4200 router, wmp600n wireless adapters and mapped drives with wpa2 don't work!

Sigh
I have a file server running windows 2003 and five computers (1 windows 7, 4 windows xp-sp3).
There are two shares on the server.
When the router is setup with wpa2, three of the windows xp machines will have problems with mapped drives. Directly after the drives are mapped, everything works, but 10 or so hours later, users can no longer access these mapped drives and there is no way to reconnect them it seems.
The other two machines (windows 7 and one windows xp machine) have no problems whatsoever.
The only thing that the three computers have in common is that they are also sharing a printer (an hp j4680) attached to one windows xp machine (not the server).
If I set everything to wpa, everything works fine, but of course my wireless network speeds drop to 56mbps.
Thoughts?

Peanut, I appreciate your effort, but I don't think you truly understand what is going on.
FWIW and for those experiencing similar oddities, On a mixed network of Windows Server 2003, Windows XP and Windows 7 machines, several Windows XP machines would on boot up decide that the router was the master browser. This made file shares on the server inaccessible to these machines. All machines were using wmp600n adapters.
All computers had excellent signal strength and could access the internet without fail.
What was not immediately evident to me was I was also having email issues where certain XP machines could not receive or send (sometimes one, sometimes both) pop email. I suspected it was a port blocking issue by the ISP since this problem was intermittent.
What was clear though is that in each of the machines that exhibited the problem that computer was seeing the browser as the browser master. So finally, I swapped out the router with another branded router. This is not the only case of this router behaving this way--in my searches I have run into several other people who have had issues with file sharing so I don't know if it is a model deficiency or firmware issue.
All I know is the all the problems went away with the router switch. File shares work. Email works.
So, I got a bad router that appeared to function properly--assuming this is not the case with other e4200s. I will know after RMAing this one.

Problem in Safari with pull-down menus

My current version of Safari, Version 7.0.3 (9537.75.14), is the buggiest software I have ever had from any Apple--bar none. The problem is dealing with pull-down menus.
The first such problem is in dealing with pull-down menus on websites.   Some of these menus are quite long.   On one particular menu the choice that I routinely need is way down near the bottom.   Routinely Safari stops scrolling before I can get that far down the pull-down menu.
And, always, when Safari stops scrolling on a pull-down menu on a webpage, it refuses to allow me to scroll down again.   To get the webpage's pull-down menu to operate then, I have to re-load the webpage.   That is a big problem for one website that I MUST use. This website has three pull-down menus on one webpage. Because Safari always locks up on the first menu, this crucial website is unusable in Safari. I have to use Firefox for this absolutely essential website.
And Safari has trouble with one of its own pull-down menus. This is the PDF menu in the printer window. Not always, but too often, when I pull down that menu to print to PDF, Safari crashes.   I have to wait for a dialog box to come up and click "send report to Apple" in order to get Safari to reopen.   I don't know how many such reports I have sent to Apple. I get the feeling that Apple is not listening.
Does anyone have any suggestions for these problems? TIA

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Different Risk Analysis Results with 10.0 and 10.1

Hello,
I do not understand why I get different results with 10.0 and 10.1. Exactly the same ruleset is applied!
Definition in 10.0 and 10.1:
Analyzed Role (which definitely contains the SOD):
Version GRC 10.0 finds the SOD S_FI14 and displays it. In 10.1 nothing is displayed...Any ideas what's the problem?
Regards
Peter

We had similar issues with 10 and 10.1.
We applied an SAP Note about logical groups and the ruleset, it did not work.
What did work:
When performing Risk Analysis, remove the Ruleset selection criteria (use the minus button).

Drawing images gives 2 different results with the same code.

Im adding my code on here, and its sort of long but ill try to explain it. Most of it you can ignore.
Anyway i'm making a tree menu with only 1 level of expansion. So you have a TreeMenu object, and this object has some Branch classes. These Branch classes have Leaf classes. That is all. On the menu there is also a little box where you can click to expand and collapse each branch. if a branch is expanded, all of its leaves are shown. if it is collapsed only the branch name is shown.
So far what I've described above works, there is a small scale compilable working program, that is alright. Theres just a few bugs to fix.
A little feature of the tree is if a branch or a leaf is selected (has been clicked on in the past) it has a blue background. This sort of works. The branch names seem to work alright, and some of the leaves. However other if you run the example i provided you can click on Leaf 1, and it will be ok, but if you click on Leaf 2 then there blue background is twice as big as it should be. But for the rest, it works ok.
This is weird to me because the same code handles any of these same situations. So it seems that i get 2 diferent results with the same code. If anyone would like to help heres some stuff you should know:
You can ignore Leaf class, i dont think theres any errors in there.
You can ignore just about all of Branch class except the update() method.
You can ignore all of TreeMenu class except the inner MouseListener class might be useful.
You can ignore TreeTester. Just the JFrame tester class.
to run the code:
javac TreeMenu.java
java TreeMenu
http://cs.ucsb.edu/~jsterling/treemenu.zip
thanks.

You make a good point Stefan but unfortunately I already checked that. I have even copied the mapping (right click copy) and pasted it from the working Mapping to the bad Map (Paste) to make sure the context values were all the same.
I also opened all the queues and compared the values in each. All values match exactly except for the result(out) queue.
In both tests I am using the same IDOC XML file.
These are the only differences I see.
1. The IDOC is exactly the same as far as I can tell but they come from two different source SWCV. SAP APPL 4.7 and Steelcase_Procurement (ECC 6.0).
2. The working map uses a local UDF. The bad map calls the UDF from a Function Group. Is there a Java version difference between the two?
A better sample of the result queues look like this:
Correct Result:
Thickness of Glass: 20
Height: 10
Width: 5
Length: 18
Thickness of Glass: 10
Height: 15
Width: 8
Length: 14
Bad Result:
Thickness of Glass: 20
<null>
<null>
<null>
Width: 5
<null>
<null>
<null>
I took this chance to redesign my Variant Config output to separate the characteristics/values, but I'm still bothered that I was unable to determine what would cause the differing values.
Any ideas?
Thanks,
Matt

Displaying results with a decimal place of two. Forcing decimal place.

Hi there,
Im writing a simple calculation device.
You input one digit and press one of two buttons to multiply it by a certain number and then the result is displayed. The result is displyed hiding the result of the button you didn't press and visa versa.
I am having a problem displaying the result with a constant two decimal place.
I am using strings and thus don't know how to do this.
Here is my code:
import flash.events.MouseEvent;
//restrict the input textfield to only numbers
txtinput.restrict = "0-9";
//restrict the input textfield to only two characters
txtinput.maxChars = 6;
// event listeners
btnW.addEventListener(MouseEvent.CLICK, WHandler);
btnC.addEventListener(MouseEvent.CLICK, CHandler);
btnW.addEventListener(MouseEvent.CLICK, hideC);
btnC.addEventListener(MouseEvent.CLICK, hideW);
//functions
function WHandler (e:MouseEvent):void
          //white calculation
          var answerW:Number = Number(txtinput.text) * Number(0.90);
          txtWResult.text = answerW.toString();
function CHandler (e:MouseEvent):void
          //colour calculation
          var answerC:Number = Number(txtinput.text) * Number(0.99);
          txtCResult.text = answerC.toString();
function hideC (e:MouseEvent):void
          //Hide colour result
          txtCResult.visible = false;
          txtWResult.visible = true;
function hideW (e:MouseEvent):void
          //Hide white result
          txtWResult.visible = false;
          txtCResult.visible = true;
After having a look online I have found these two resources:
http://helpx.adobe.com/flash/kb/rounding-specific-decimal-places-flash.html
and
http://stackoverflow.com/questions/11469321/decimals-to-one-decimal-place-in-as3
But I am confused when combining these techniques with strings.
Any help would be greatly appreciated,
Thanks in advance
Mr B

Use the toFixed() method of the Number class instead of the toString() method. The result of it is a String with the number of decimal places you specify.
          var answerW:Number = Number(txtinput.text) * Number(0.90);
          txtWResult.text = answerW.toFixed(2);
          var answerC:Number = Number(txtinput.text) * Number(0.99);
          txtCResult.text = answerC.toFixed(2);

Problem mapping JDO to an existing DB schema

I'm having problems mapping a legacy database to JDO. Suppose I have a class
public class Test {
public int pk;
public String fieldA;
public String fieldB;
public String fieldC;
An existing legacy table TEST looks like
TEST
|============|
| PK | ... |
|============|
| 1 | ... |
|============|
The fields values are stored in a separate table
TEST_FIELDS
|==========================|
| PK | FIELD_ID | VALUE |
|==========================|
| 1 | 1 | fred |
| 1 | 2 | accounts |
| 1 | 3 | jim |
| 2 | 1 | wilma |
| 2 | 2 | research |
| 2 | 3 | alice |
|==========================
So the value for fieldA of an object with key i in the TEST table
would be found in the TEST_FIELDS table with key (i, 1), fieldB with
key (i,2) and fieldC with (i,3) and so on. I'm not sure how I would express
such a mapping in the JDO metadata file, or indeed whether this is
even possible. Any suggestions?

This mapping is not possible in the current incarnation of
Kodo.

Java-wsdl-mapping file with incorrect case

Hi. We're working with JDeveloper 10.1.3.1 preview and have encountered what I believe to be a bug. We have a schema with element names that are mixed case (such as FirstName). We are trying to use JAXB to create our classes and then wrap it as a web service. The problem is, the WSDL and java-wsdl-mapping file references the element names as firstName rather than FirstName.
In experimenting, I've learned that if I create the WSDL and schema first and "Create Java Project from WSDL" that it creates a java-wsdl-mapping file with the case preserved. However the first time I go into the web services properties dialog and click OK, it re-creates these files with the case changed again.
Please advise if this is expected behavior...although I don't see how it could be since it is inconsistent.
Thanks very much,
Richard Davis

I was told the product manager and/or developers from Oracle watched this board. Doesn't anyone have a response to this?

Problem mapping results with FM F4UT_RESULTS_MAP

Similar Messages

Maybe you are looking for