Problem Modify and optimize an application

We have problem using modify application and optimize application on a specific application.
The application name is GPFormat.
When we do a modify application and choose "Reassign SQL Index" we get the following errror message:
Error message:: Cannot drop the index 'dbo.tblFACTGPFormat.IX_tblFACTGPFormat', because it does not exist or you do not have permission.
And if we do an optimize application with "Full Optimize" and "Compress database" we get the following errror message:
Error message:There is already an object named 'CONSTTBLFACTGPFORMAT' in the database.
Could not create constraint. See previous errors.
We using BPC 5,1 SP5 and SQL2005

It seems a previous run of optimize with compress was failing.
So you have to rename CONSTTBLFACTGPFORMAT table and make sure that installation user
of SAP BPC has the correct access regarding table tblFactGPFFormat.
Are you using custom indexes for this table?
I suggest to drop the existing cluster index for table tblFactGPFormat and after you have to run another optimize with compress. This should fix all your problems.
Regards
Sorin Radulescu

Similar Messages

ESET NOD 32 cannot scan past this point. I keep getting stuck at 56% at the following; C:\Documents and Settings\Owner\Application Data\ Mozilla\Firefox\Crash Reports\Pending. Is this a problem with NOD32 or with Firefox? Thank you.

I ran into a glitch on my system that I tried to fix myself. My NOD32 was always showing the yellow warning circle as my protection status when I started my computer. I tried to fix this every way I new how.
Then I started to get pop ups asking me to fix and then send system error reports to Windows. Some stating they were '''''critical.''''' So I sent NOD32 the e-mail below.
'''Me:''' I cannot seem to run a complete system scan. I keep getting stuck at 56% at the following point. C:\Documents and Settings\Owner\Application Data\
Mozilla\Firefox\Crash Reports\Pending
I also keep getting messages to send error reports to Microsoft constantly. I also have this code C:\pagefile.sys-error opening
Thank you for your assistance.
'''Their solution:'''
Based on the information you provided, we recommend that you upgrade to latest version of ESET NOD32 Antivirus and see if this makes a difference.
Please click or copy/paste the following ESET Knowledgebase article into your web browser for step-by-step instructions:
'''Me''' : I did as they requested and am fully upgraded and licensed with their new edition.
Ran a new scan same problem.
I sent them a new e-mail but now wonder if it is a Firefox issue as, C:\Documents and Settings\Owner\Application Data\
''Mozilla\Firefox\Crash Reports\Pending'' this is where the scan stalls.
Any help would be appreciated.
Thank you.

Try delete the files in Pending folder and make the scan again, do not be afraid to delete the files see : https://support.mozilla.org/en-US/questions/679996
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

All content from iTunes is tied to the account that downloaded it, so the id that shows when trying to download updates should be the account that 'owns' that app. Do you recognise the id that is showing e.g. has anybody else downloaded or synced content to your iPad ?

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers a

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

Good day!
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Regards,
Pfaffenbichler

Hi , unfortunately i faced with a problem that i couldent open my audio note so i thought if i delet it and transfer the application from itunse from my pc i can have my files...but all of them deleted from both application and also from wifi address... I

Hi , unfortunately i faced with a problem that i couldent open my audio note so i thought if i delet it and transfer the application from itunse from my pc i can have my files...but all of them deleted from both application and also from wifi address... Is it any solution for recovery the filew? I missed lots of important files , plz help me
Tnx alot

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Hi, I'm having a problem retrieving my missed calls. When I press the recents button it goes back to home screen. But when I press mail button and any other application the button works. I have tried restore but to no avail. Please help.

Hi, I'm having a problem retrieving my missed calls. When I press the recents button it goes back to home screen. But when I press mail button and any other application the button works. I have tried restore but to no avail. Please help.

I have exactly the same problem, happy a few days ago. Did you find a solution?

SCOM-Difference between Problem Count and Event Count in Application Failure Analysis Report

Dear All,
Could someone explain me clearly , the difference between Problem Count and
Event Count in Application Failure Analysis Report. Please help me in understanding What is meant be problem and event in the report .
Thanks in Advance.
Regards,
Rajesh Kumar C

Hello Rajesh,
The "problem" is the logically grouped set of the exception events which have the identical hash calculated over several fields as "Stack", "Source", "Failed Function" and so on... So, even if exceptions are different
in the other properties but hash matches over the considered properties - then all those exceptions go into the same "problem group".
So, event is an instance of the problem. One event contributes to one problem but one problem might have a huge event count if you have a repeating issue.
The logic is similar for the performance analysis report, only fields that go into the "problem" hash are different. e.g. "Stack" is not used in hash for perf events...
Dmitry Matveev

After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application"

After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application" - Platform: WIN7 - iTunes 11.2.9.115

Start with the third box in Troubleshooting issues with iTunes for Windows updates.
If that doesn't work, use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
tt2

Problem in synching multiple web applications

I have a domain called myDomain. In this domain I have 2 enterprise applications
say
ent1App with ent1App-project and ent2App with its ent2App-project. Each enterpsrise
application has one web application
(webApp1 and webApp2 respectively). I have the same set of webflow files (.wf
files) in both
ent1App-project/application-sync/web-apps/webApp1 and ent2App-project/application-sync/web-apps/webApp2
directories.
Now suppose I synchronize my webflows (using EBCC) for say ent1App. The synchronization
is accomplished without any problems
and this is confirmed when the entries get updated in the Master Data Repository
where all the webflows for ent1App get
stored. This is as viewd using the datasyncservlet.
If I now do a synchronization on the other enterprise application called ent2App,
the synchronization takes place
successfully but when viewed in the datasyncservlet, it shows up the entries for
the webflows of ent2App. i.e. the entries
for all the weblows of ent1App which were shown in the Master Data repository
are not shown.
We looked up the Cloudscape database to ensure that the entries for both the enterprise
applications are present and it does
contain the records for both the applications. This however does not show up in
the datasync servlet. Due to this we get a
namespace not found error whenever we try to access the application whose entries
are missing in the master data repository.
I have separate names for my datasync folder for each of the applications in my
config.xml as shown below
ent1App
<Application Deployed="true" Name="ent1App"
Path=".\config\myDomain\applications\ent1App" StagedTargets="iden_staging">
<WebAppComponent DeploymentOrder="1002" Name="datasync" Targets="iden_staging"
URI="datasync"/>
ent2App
<Application Deployed="true" Name="ent2App"
Path=".\config\myDomain\applications\ent2App" StagedTargets="iden_staging">
<WebAppComponent DeploymentOrder="1002" Name="datasyncDev"
Targets="iden_staging" URI="datasyncDev"/>
I am using WLS6.1 SP4 and WLP 4.0 SP3
Can someone please tell me what could be the problem?
Thanks
Shah Jimmy

When you peform a data sync you are updating the data_sync_item table
with the EBCC xml files. For those files that are not present in the
EBCC project they will be deleted from the table.
You can not use multiple enterprise applications that contain Portals.
Try using using multiple domains that contain separate databases for
datasyncs.
Here is a snippet I recently sent out in a support case:
Unfortunately there is not a documented best practice for maintaining
multiple projects and enterprise applications. In my opinion if you
plan to create multiple enterprise applications they will need to
maintain separate application components and web applications. The
enterprise applications will need to use the same portal resources
(pools) and therefore same tables. The synchronization modes documented
at http://e-docs.bea.com/wlp/docs40/deploygd/appdata.htm explain the
limitations in data sync -- either all files are deleted and updated or
only modified files are updated. Either mode will delete files from the
data_sync_item table that do not exist in the current project.
Therefore one project will need to be used per domain.
-- Jim
Jimmy Shah wrote:
I have a domain called myDomain. In this domain I have 2 enterprise applications
say
ent1App with ent1App-project and ent2App with its ent2App-project. Each enterpsrise
application has one web application
(webApp1 and webApp2 respectively). I have the same set of webflow files (.wf
files) in both
ent1App-project/application-sync/web-apps/webApp1 and ent2App-project/application-sync/web-apps/webApp2
directories.
Now suppose I synchronize my webflows (using EBCC) for say ent1App. The synchronization
is accomplished without any problems
and this is confirmed when the entries get updated in the Master Data Repository
where all the webflows for ent1App get
stored. This is as viewd using the datasyncservlet.
If I now do a synchronization on the other enterprise application called ent2App,
the synchronization takes place
successfully but when viewed in the datasyncservlet, it shows up the entries for
the webflows of ent2App. i.e. the entries
for all the weblows of ent1App which were shown in the Master Data repository
are not shown.
We looked up the Cloudscape database to ensure that the entries for both the enterprise
applications are present and it does
contain the records for both the applications. This however does not show up in
the datasync servlet. Due to this we get a
namespace not found error whenever we try to access the application whose entries
are missing in the master data repository.
I have separate names for my datasync folder for each of the applications in my
config.xml as shown below
ent1App
<Application Deployed="true" Name="ent1App"
Path=".\config\myDomain\applications\ent1App" StagedTargets="iden_staging">
<WebAppComponent DeploymentOrder="1002" Name="datasync" Targets="iden_staging"
URI="datasync"/>
ent2App
<Application Deployed="true" Name="ent2App"
Path=".\config\myDomain\applications\ent2App" StagedTargets="iden_staging">
<WebAppComponent DeploymentOrder="1002" Name="datasyncDev"
Targets="iden_staging" URI="datasyncDev"/>
I am using WLS6.1 SP4 and WLP 4.0 SP3
Can someone please tell me what could be the problem?
Thanks
Shah Jimmy

Code Generation and Optimization

hi,
we have been looking into a problem with our app, running in a JRockit JVM, pausing. Sometimes for up to a second or so at a time.
We enabled the verbose logging of codegen and opt.
And we see entries like:
[Fri Sep 3 09:51:38 2004][28810][opt ] #114 0x200 o com/abco/util/Checker.execute(Lcom/abco/util/;)V
[Fri Sep 3 09:51:39 2004][28810][opt ] #114 0x200 o @0x243c4000-0x243c7740 1186.23 ms (14784.88 ms)
So the optimization took 1186 ms.
Does this optimization happen in the main thread?
I.e., is the above message an indication that the app had to stop for 1186ms while the optimization occurred?
Any help on this would be greatly appreciated!
Also, does anyone have any more pointers to info on the code generation and optimization in JRockit?
I have only managed to find the following:
http://edocs.beasys.com/wljrockit/docs142/intro/understa.html#1015273
thanks,
JN

Hi,
The optimization is done in its own thread and should not cause pauses in your application.
The probable cause for long pause times is garbage collection. Enable verbose output for gc (-Xverbose:memory), or use the JRockit Management Console to monitor your application. Try using the generational concurrent gc, -Xgc:gencon, or the gc strategy -Xgcprio:pausetime. Read more on: http://edocs.beasys.com/wljrockit/docs142/userguide/memman.html
If you allocate a lot of small, shortlived objects, you might want to configure a nursery where small objects are allocated. When the nursery is full, only that small part of the heap is garbage collected at a smaller cost than scanning the whole heap.
If you need help tuning your application, you could make a JRA recording and send to us: http://e-docs.bea.com/wljrockit/docs142/userguide/jra.html.
Good luck,
Cecilia
BEA WebLogic JRockit

Patch confirm problem in maintenance optimizer.

Dear Experts,
i had configured solution manager maintenance optimizer.
previously while starting i had a problem with
and it was solved.
After, going in to Solution_manager in the selected solution,
i had selected the server and component, for which i need to download the
support package files and upgrade my application components.
and after selecting the required files,i'm able to see the selected files in download
basket manager.But, i'm not able to see the files in popup coming to confirm the
components.
i have no idea on what went wrong.
i got stuck up here, since after confirming the selected packages,it will go to
Perform imlementation and to END.
anyway i had saved the status.
i request you to give your inputs for solving the problem.
one warning i'm getting while starting "solution_manager"
is as follows:-
Profile parameter icm/host_name_full is not set correctly (see long text)
thanking you in advance.
by
raghav

Hi,
I think you need to set the profile parameter "icm/host_name_full" in rz10 T-Code
in instance profile it should in the following manner <b>"host name of your server.your company name.com"</b>
e.g.:mycomputer.mycompany.com
Reward the points if useful

Avoid modified and original folders

Hello,
I started to sort my pictures thanks to the roll rather than thanks to the albums. This way, I save times when archiving: no need to export all your albums, you can directly copy the sorted roll folders from your Iphoto library. Those folder can be directly open and your pictures viewed with any kind of software. My problem is the modified and original automatic folders, Because, I need to move the content of the modified pictures into the originals ones and replace the duplicate. It is the way I have found to merge the original and modified pictures of the same roll. Is there a way to avoid the creation of the modified folder. I would like to have all the picture of one roll in the same folder in my photo library. I could make duplicate of the picture I want to keep the original but with all the pictures in the same folder.
Thanks in advance.
Aude-Line

Hi, ohdelyne. What you are trying to do is substitute your own photo organizing scheme for the one that iPhoto imposes, and that enables iPhoto to function. If you do that, iPhoto won't function.
If you want the benefits that iPhoto offers, you must leave the contents of your iPhoto Library folder exactly as iPhoto has arrranged them. If you arrange them differently, you won't be able to use iPhoto at all, and you shouldn't try. Instead, use a different photo viewing application and do all your organizing manually.
Some Mac users find iPhoto's inflexible organizing scheme annoying or inconvenient for some purposes and perfectly acceptable for others. Such users (and I'm one) import some photos into iPhoto and let it organize them, and keep other photos in folder hierarchies they've created in the Finder, and use other applications to view, edit and manage them. This can be a fine alternative to handling all one's photos the same way. I have about 100,000 photos on my hard drives, and only about 20,000 of them have been imported into any of my ten iPhoto libraries.
Maintaining multiple iPhoto libraries for diffferent purposes or categories of pictures can also be very helpful in overcoming the disadvantages of not being able to alter the structure of a single all-encompassing iPhoto Library.
Message was edited by: eww

Optimization of application

Hi
How can I optimize my application(Forms/Reports etc)
What are basic steps for that.
Thanks
skr

Hi,
What are basic steps for that.1 - Observe - See your SQL*Forms latency, and observe Oracle performance with STATSPACK:
http://www.dba-oracle.com/art_dbazine_forms_garmany.htm
http://www.dba-oracle.com/art_statspack.htm
2 - Analyze - Find the root cause of the performance problem
3 - Fix

How to automatically open and close an application at specific times?

Hi,
I am trying to figure out how to open and close an application at specific times.
I have set iCal up to open it no problem...however, the application needs you to click yes before entering into it upon boot.
How do I do this and close the app. I tried creating a workflow in automator, but iCal simply opens the workflow and does not play it. This also does not solve the issue of needing the 'yes' button to be clicked.
Kind regards,

Hi,
I am trying to figure out how to open and close an application at specific times.
I have set iCal up to open it no problem...however, the application needs you to click yes before entering into it upon boot.
How do I do this and close the app. I tried creating a workflow in automator, but iCal simply opens the workflow and does not play it. This also does not solve the issue of needing the 'yes' button to be clicked.
Kind regards,

Problems with P6 R8 Web Application

Hi,
I am currently experiencing problems accessing the web app. I have installed and configured the application (both MS1 and Admin Server) using the admin server configuration panel. My final stumbling block I believe is the correct URL to launch the application. I have seen a number of suggestions (the video - 1275445.1 has 2 on the same screen (last slide!).
http://localhost:7003/p6/action/login
and
http://webserver_name_or_ip_address:7003/p6/login
The webserver name is a red herring as the example they show on the video is local host.
I have also been advised to try
http://localhost:7001/p6
That doesn't work either.
Can anyone offer any further suggestion?
Many thanks
Simon

Do you know the host name where Web logic is installed? you can check it with the person who has deployed the jar files on the web logic.
http://<host>:7001/p6/action/login

Problem Modify and optimize an application

Similar Messages

Maybe you are looking for