Problem: murmur (mumble server) restarts on pure systemd system

Hi. I have a pure systemd install (no rc.conf).
I installed murmur form "community" and started it with
systemctl start murmur
The service starts but restarts every two minutes or so with these lines in journalctl:
PID file /run/murmur/murmur.pid not readable (yet?) after start.
murmur.service operation timed out. Terminating.
Unit murmur.service entered failed state.
murmur.service holdoff time over, scheduling restart.
Any clues?
Last edited by SoleSoul (2012-08-18 22:42:41)

I now use murmur-ice from the AUR, but my problem was resolved after manually creating /run/murmur/murmur.pid, setting permissions, and restarting the systemd service. Never had a problem after that. Not sure why this wasn't getting created automatically; my /var/run and /run symlinks are correct and no problems with other services.
Sorry I can't be of more help, but it seems to have something to do with a conflict between the service and the desired pid file.

Similar Messages

[Solved] Installting A Pure systemd System From Scratch

Hello all,
A few months back I gave Arch a spin and it was great, but decided to wait for Windows 8 RTM to come out to check it out as well.
Windows 8 being the horrible thing it is, Arch is the way to go, and I would like to do a test installation alongside Windows 7, in order to make sure I can make the switch permanently.
Having followed the forums pretty consistently, it seems that systemd is the future.
Instead of waiting for it to be integrated (which is supposed to happen at some point), I was wondering if I can somehow install a pure systemd system as part of the basic installation and not installing initscripts at all.
Thanks, Adam.
Last edited by adam777 (2012-08-28 12:55:27)

mhertz wrote:
luvfree wrote:[...].
I'm going to reinstall anyway so why not wait until the iso doesn't pacstrap the old initscripts and sysvinit?
Just makes for a cleaner install all around.
I'm certainly not going to leave this install on with 4 installed desktop environments.[...]
I myself was also reinstalling alot and imaging and whatnot when I first began with linux(arch), but after some time I realised that it was pointless and linux dosen't need those reinstalls for optimization like windows did, and pacman has nifty switches to get you sorted on what you've explicitly installed and hence, can go delete the cruft not used anymore, or to list files not owned by any installed packages, to clean up in etc...
Nowadays, I newer reinstall unless something would go _really_ wrong, and only backup config-files and home-files, and keep a livecd around for rescue-operations, and an automated personal install script for if I ever do need to reinstall...
Anyway, of course it's your own choise
I understand and the arch way is awesome.
but it is still on the new side to me.
I've bloated this install with 4 desktop environments so a reinstall is inevitable. lol
once I settle on which one to keep I'll do just that.
it will be some time though I'm sure.
I'm just keeping my eye out for an iso without the old initscripts pacstapped to begin with.
it just HAS to be a cleaner install.
Thanks for your input though.
CHEERS.
Oh yeah and by the way I've used nothing but linux for over 10 years now.
No windoze here.
Last edited by luvfree (2012-09-05 03:40:22)

Backup Problem with Windows Server Backup

Hello,
we have problems with Windows Server Backup Feature.
Our system is a Windows Server 2008 Standard. On the computer runs a SQL Server 2005.
Since several days no backup can be carried out. We get the error message:
- Error during a Volume Shadow Copy service operation. Detailed error: Failed to process the volume shadow copy: "0x800423F0".
- Errors in the event log: For the started backup an error occured. The volume shadow copy operation was not successful. Error code: "2155348129". Run the backup again after the problem was fixed.
We have already tried to restart the services, uninstalled the Windows Server Backup Feature and reinstalled it, also we rebootet the server several times. Unfortunately, so far without success.
What else can we do respectively where could be the problem?
Kind regards
Sven Otto
KRK ComputerSysteme GmbH (Germany)

Hi Sven,
Please check if there a system partition that is created on the server. If so, assign a drive letter on the partition to check the results.
For more detailed information, please refer to the article below:
Volume Shadow Copy Error 0x800423f0 - writer error: inconsistent snapshot
http://kb.backupassist.com/articles.php?aid=2995
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Some Smaller Problems concerning HTTP-Server and iSQL*PLUS

Hi!
System: WIN2K, ORA 9.0.0.1
1. Problem: With HTTP-Server launched by ORACLE at System Start
can not connect to DB via iSQL*Plus, message: ORA-12638 (german
message:"Abruf des Berechtigungsnachweis misslungen") Credential
retrieval failed. Does no longer occur when shutting down
service and relaunching Apache manually. Why?
2. HTTP Server dies instantly when accidentially sending /*
somewhere in SQL-Statement or alone via iSQL*Plus (in SQL*Plus
Window /* starts DOC-Mode without chance to end DOC-mode with #)
Can anyone help? Thank you!
TIP: Manipulating Database via iSQL*Plus on a Eudora-Browser
with IR Cellular impresses every Boss! :-)

Hello CJ
1st of all: Thank you for your answer!
What privilege iSQL*Plus connection are you trying make?Tried as normal user and as sysdba. Both works well with Apache
in Console, both doesn4t work with Apache as a Service started
(even if there is a 2nd Apache started in Console window)
Can you connect as a normal user
if you specify a full DB connection string? By full connection
string I mean the "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS...)))"
etc. syntax commonly seen in tnsnames.ora. No! Error "SP2-0306 Invalid Option" occurs.
that the problem also occurs in the old GUI (non-web version)
version of SQL*Plus?Right! Typing DOC means entering (now unsupported) DOC Mode
(DOC> Prompt) return to SQL> with #. Typing /* gets you into DOC-
Mode but you can4t leave with #. (SQL*Plus userguide and
reference Part F Obsolete Commands)
In iSQL*Plus (web based version) typing /* caused apache to die
(on console!! as service as I mentioned: no connection ).
Somehow problem no longer occurs. (Miracle?)
3. Your Palm efforts sound neat! Can you share with the forum
how usable it is? Are there any configuration tricks
you found?No tricks needed, I just started a connection to a local
Provider via IR and Nokia Cellular. Connected to DB via
iSQL*Plus using Eudora-Browser, logged in as sysdba and shutdown
DB and started it again. Looked at some v$-views, killed a
session or two had a good time and impressed everyone. Decide
for yourself if this could be useful. Might be helpful for
remote troubleshooting during holidays so don4t tell your boss
about it.
(Did anyone try this on Windows CE? Like to know!)
Dominic

[SOLVED] Reinstalling Arch on pure systemd - Localization problem.

Hi
I have accident regarding today filesystem update, so I decide to install arch again on pure systemd from the begining.
I am now on freshly installed xfce and i just noticed my userspace is totally not localized, despite proper localization steps.
/etc/locale.gen
pl_PL.UTF-8 UTF-8
# cat /etc/vconsole.conf
KEYMAP=pl
FONT=lat2-16
CONSOLEFONT=lat2a-16
FONT_MAP=8859-2
# locale -a
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_COLLATE to default locale: No such file or directory
C
POSIX
pl_PL.utf8
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=pl_PL.utf8@euro
LC_CTYPE="pl_PL.utf8@euro"
LC_NUMERIC="pl_PL.utf8@euro"
LC_TIME="pl_PL.utf8@euro"
LC_COLLATE="pl_PL.utf8@euro"
LC_MONETARY="pl_PL.utf8@euro"
LC_MESSAGES=C
LC_PAPER="pl_PL.utf8@euro"
LC_NAME="pl_PL.utf8@euro"
LC_ADDRESS="pl_PL.utf8@euro"
LC_TELEPHONE="pl_PL.utf8@euro"
LC_MEASUREMENT="pl_PL.utf8@euro"
LC_IDENTIFICATION="pl_PL.utf8@euro"
LC_ALL=
What i should do?
Last edited by utops (2012-10-06 11:46:37)

utops wrote:
karol wrote:
Create ~/.config/locale.conf
$ cat $HOME/.config/locale.conf
LANG="pl_PL.UTF-8"
and reboot.
I know nothing about xfce, but can you tell me what part of the console stuff is in English? Can you copy / paste an example?
$HOME config don't work either.
From grub to login and from using CLI apps like nano and wifi-menu,mc,no polish language there.
Everything is in english...
Like system sudenly goes blind and don't see what i put in to configs.
Everything worked well on my old pretty instalation i already miss that times.
EDIT:
Sudenly it worked again.
Dunno what happened,just working again...
Ok,so thx for tips guys,have a good evening...
see my previous post.
please mark the thread as solved.

JDBC Connection pool recovery after DB server restart

I am finding that Kodo is throwing the following exception after I restart
my database server (mysql). I am doing the database server restart while my
application server is idle, so it is not during a transaction.
Communication link failure: java.net.SocketException [code=0;state=08S01]
NestedThrowables:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
This is presumably due to the JDBC connection pooling. Is there a
configuration setting that allows Kodo to detect such failures and reconnect
to the database server without exposing this problem to the application
code? For example, WebLogic Server's JDBC connection pool has a setting that
enables testing a connection and recovering from such failures before
allocating it from the pool.
Ben

This is presumably due to the JDBC connection pooling. Is there a
configuration setting that allows Kodo to detect such failures and reconnect
to the database server without exposing this problem to the application
code?Not right now. You can log an enhancement request with our bug database:
http://bugzilla.solarmetric.com/

TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps.

Local Network Connection Problem with SQL Server 2008 R2

Hi,
I have CRM application which uses SQL server 2008. Weird thing is that I have no problems connecting from client machines to the server when using a particular router (via LAN) and when I upgrade the firmware of the same router (A common open source firmware
which is used by many also works perfect apart from mentioned problem) and restart the server, the connection cannot be established. I get Error 40.
When i downgrade the firmware and restart the server, the connection works again.
Please note that I am absolutely not touching any configuration of the server. Also the CRM software allows remote connections from public IPs which this feature works fine with both downgraded and upgraded firmwares.
As for my understanding, the routers do not block ports in LAN connections. So how can I diagnose the reason for this connection problem?

Hi Leony83,
Please also help to check Windows Event Log information regarding this issue, so that we can do further investigation. In additin, here is the general steps to troubleshoot SQL Server Error 40 issue. Please see:
SQL SERVER – Fix : Error : 40 – could not open a connection to SQL server – Fix Connection Problems of SQL Server:
http://blog.sqlauthority.com/2008/08/24/sql-server-fix-error-40-could-not-open-a-connection-to-sql-server-fix-connection-problems-of-sql-server/
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

BPEL Server Restarts intermittently

Hi All,
I have got a strange problem with my BPEL Server. Every once in a while the BPEL Server restarts on its own. I do not know if it has to do something with memory leaks or performance or some other reason.
I have made my logs to roll at every 2 GB. I also noticed that the BPEL Domains are reloaded everytime the logs are rolled. If during this restart there is some process on the go then i get erroneous results.
I am not able to reproduce the issue but it does happen intermittently. Has anyone else faced this issue?

Also check logs in $OAS_HOME/opmn/logs/ for "Restart" messages, then check the timeouts for the BPEL instance in $OAS_HOME/opmn/config/opmn.xml. These are maybe too low.
--olaf

PI 7.0 Production server restarts automatically

Hi guys,
We have installed and configured correctly a PI 7.0 system on Windows 2003 Standard Edition X64-bit with SQL Server 2005. We are on SP12. Everything, SLD, RFC connections work properly.
The problem is that 4-5 days after the installation the Windows Server restarts automatically in unexpected time during the day (unexpected shutdown), even when anybody doesn't do anything in the system. In the Event Viewer we get the following message/error "System Error: Category 102 EventID 1003". There are no other messages/errors.
This is a production system and we are supposed to go live within the next days! So I need your help ASAP.
Any ideas?
Thank you.
Best Regards.
Evaggelos

1) update your network card drivers to the latest and for all devices including your motherboard chipset drivers.
2) Are you using ethernet instead of USB?
3) This URL might help you
http://www.pcreview.co.uk/forums/thread-1885463.php
Regards
Sangeetha

Application Builder problem on one server but not another

I am having an Application Builder problem. When I get into App Express and go inside the builder and try to edit a listed application, I get an “http 404 the page cannot be found. The page might have had its name changed or is temporarily unavailable” situation. I can get into SQL commands, utilities, and administrative activities. I can also run the application. Also, if I go onto a different server with App Express on it, I can get into the builder and edit applications with no trouble. Our DBA had the server in question rebooted a little over a week ago and that took care of the problem for a couple days. Any ideas? Is this an Express problem or a server problem? He had also tried restarting Express before he had the reboot done and that didn’t help.
Thank you for any help.
Cordially,
Robert J. Smith

I have messages from the Apache error log files from the dates I was getting the builder error. For future reference, I will post them below. The builder has been working fine lately.
Robert Smith
** error log messages follow **
[Mon Jul 16 07:25:12 2007] [error] [client 147.159.5.134] [ecid:
79143788610,1] File does not exist:
/app/oracle/oraappsrv10g/forms/java/java/awt/KeyboardFocusManager.class
[Mon Jul 16 07:25:12 2007] [error] [client 147.159.5.134] [ecid:
79143788611,1] File does not exist:
/app/oracle/oraappsrv10g/forms/java/java/awt/event/MouseWheelListener.class
[Mon Jul 16 07:25:13 2007] [error] [client 147.159.5.134] [ecid:
83438757083,1] File does not exist:
/app/oracle/oraappsrv10g/forms/java/oracle/forms/registry/default.dat

Problem with windows server 2012

i have a problem with window server 2012 , i remove some feature in server manager and it restart .but when i log in into my account it shows a black screen with cmd window with this massage "C:\users\Administrator>." please
help me. i dont know whats happend and i cannt work with this
thanks a lot

You may follow this link to get it solved
http://www.jon-tupitza.com/2014/02/18/enabling-the-windows-server-2012-r2-gui/
http://www.arabitpro.com

Web Service from stateful Session Bean deleted after server restart

Hi,
i created a stateful session bean and from this a web service.
I am able to deploy it and it works really fine.
My problem is: after a server restart the web service is gone and i
have to deploy it again.
I have some other web services (but these are web services from stateless session beans)
but they "survive" the server restart.
I don't want to deploy the web service after every server restart, did I forget something or
is it a general problem of stateful session beans or web services?
Thanks in advance
Jens

Hello Björn,
I am not quite sure what your problem is but did you have a look at these articles:
http://help.sap.com/saphelp_nw04/helpdata/en/4d/993441c73cef23e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/be/2e2c4142aef623e10000000a155106/frameset.htm
I hope they can give you some idea.
Regads
Vyara

Best Practice to troubleshoot a Crawler Issue after SQL Server restarts

Hi Everyone
I am after some general advice or a suggested place to start when troubleshooting crawler issues after an unplanned, out-of-sequence server restart.
Specifically, the SQL Database in the SharePoint 2010 farm. Better yet, is there a standard practice way of resolving such issues?<o:p></o:p>
So far articles I have found suggest options from reviewing the crawl logs, creating a new crawl component, right through to using fiddler to monitor the crawler.
Are these sufficient places to start / methodologies to follow, what else should be considered?
Any advice greatly appreciated.
Thanks,
Mike

Well, as I said before, there are lots of different potential issues & resolutions for crawlers. It really depends on the issue. I would say that the base troubleshooting steps start the same no matter which service/feature you are looking
at. So, I'll try to keep this sort of generic, but beyond finding the details of the problem, the SOP or process will vary greatly based on what the error is. I hope this helps, and sorry if it's not specific enough.
1 - check the ULS logs
2 - check the windows application logs
3 - verify related services are running (get-spserviceinstance), possibly stop/start them to reprovision the instance on the affected server
4 - clear the config cache (this alone will clear about 30% of your basic problems)
6 - verify disk space & resource consumption on affected server (& SQL, SQL is always the potential to be the true "affected" server)
7 - iisreset
8 - verify connectivity between all servers in the farm and SP
9 - verify requir3ed features activated
10- check if any changes were made to environment recently (new hardware, updates to OS or apps, updates to GPOs, new solutions, etc)
11- check if the issue is reproducible in another environment (only reliable if this is a similar environment, i.e. same patch level test farm or dr farm). see if it occurs in other site collections within the web app, different web apps, different
servers/browsers, etc, basically just try to nail down the scope of the problem
There is a whole slew of thiings you could check from verifying certificates & perms, to rerunning psconfig, to checking registry keys, again I go back to it depends. hopefully this can get you started though. in the end ULS is where all
the real info on the issue is going to be, so make sure you check there. don't go in with tunnel vision either. if you see other errors in ULS, check them out, they may or may not be related; SharePoint is an intricate product with way more moving
parts than most systems. fix the little quick ones that you know you can handle, this will help to keep the farm clean and healthy, as well as crossing them off the list of potential suspects for your root cause.
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Composites in "Unknown" state after managed soa server restart

Hi,
I am using SOA suite 11.1.1.6 version on 64 bit OEL Linux. I am getting following error in managed server output log files:
Feb 20, 2013 5:59:32 AM IST> <Error> <oracle.integration.platform> <SOA-20003> <Unable to register service.
oracle.fabric.common.FabricException: Error in getting XML input stream: oramds:/deployed-composites/WirelessEnterprise/svcEnrichSEARequest_rev1.0/svcEnrichSEARequest.wsdl: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/deployed-composites/WirelessEnterprise/svcEnrichSEARequest_rev1.0/svcEnrichSEARequest.wsdl does not exist.
Though this composites gets loaded, the composites dependent on this composite goes into "Unknown" state. Other composites are properly loaded on server restart.
Please let us know if anybody has any solution to this problem.

Hi,
Thanks for your help.
we have narrowed down to problem now.
The actual problem occurs while redeploying same composite on same revision.
E.g 3 composites A, B and C are deployed on and in "Up" state.
B And C composites depends on A.
B composite composite.xml has following entry
<import namespace="http://xmlns.oracle.com/A"
location="oramds:/deployed-composites/Enterprise/A_rev1.0/A.wsdl"
importType="wsdl"/>
same entry exist for C composite.xml as well.
Now whenever composite A is redeployed with same revision (1.0 in our case), and managed servers are restarted, B and C composites goes in to "Unknown" state.
Moving A.wsdl to /apps/wsdl/* in MDS works but it duplicates the A.wsdl file beacause it also exists in MDS @ /deployed-composites/Enterprise/A_rev1.0/A.wsdl
Please let us know if anyone has any solution.
Thanks,
Rupesh.

Problem: murmur (mumble server) restarts on pure systemd system

Similar Messages

Maybe you are looking for