Problem of getting event in the jTabbedPane

Hi,
I have problem to do a jTextField.setText(), or jTextField.getText() from a jTabbedPane.
I create a jTabbedPane and have 7 jPanel in it. For the fifth jPanel, all jTextField in there works normally, but for the 6th and 7th one, all jTextField in there doesn't work.
When I call getText(), I can alwys get "", and when I call setText(), I cannot see any update in the jTextField, even I can know that the content is actually changed. However, I can still capture the event on this 6th and 7th panel.
Thanks for help!
Nachi

There seem to be quite a lot of quotes in the example above.
My guess is that it works in the manual login because the shell does concatenate some of the escape characters.
In a Java program, you should not need that amount of escaping...
Regards,
Ludovic.

Similar Messages

  • Problem Posting an Event to the EventQueue

    Hi all,
    while i develop a java application i get problem posting ana event to the EventQueue using postEvent method.Here is the problem.i have a menu which have 3 menu items (Load, store, hide).i want when the user click "hide" the code in "store" option excuted plus extra code in option "hide".i tried to implement this using the postEvent of EventQueue. i simlate this by tring to post ActionEvent to simulate user cliks option "store" but this didn't work. can anyone tell me what's the problem.thanks

    try JMenuItem's doClick(). that simulates the user clicking on your menu item.
    thomas

  • Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

    Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

    Jai141 wrote:
    ... and im not sure as i brought the phone of someone else..  i will have to ask them
    Good Luck.
    Jai141 wrote:
    Thanks
    You're Welcome.

  • Problem with getting started with the SQL Developer in oracle 11g

    I downloaded the oracle 11g from the oracle site and installed it on my machine.Now i want to write the sql queries and practise them......so i tried this:start\oracle11gHome\ApplicationDevelopment\Sqldeveloper . But I get a messagebox with a browse button asking me to "Enter the full pathname for java.exe"
    what is this all about?Do i need to install jave in my host machine?
    how to solve this problem?

    hi
    If you are asked to enter the full pathname for java.exe, click Browse and find java.exe. For example, the path might have a name similar to C:\Program Files\Java\jdk1.5.0_06\bin\java.exe.
    http://download.oracle.com/docs/cd/E10405_01/doc/install.120/e10407/install.htm
    hope this helps
    zekeriya

  • Problem in getting data into the child window.

    Hi.
    problem description:
    I have a jsp(lets say parent.jsp). On click of a button in parent.jsp, a showmodal dialogue opens(say child.jsp).
    child.jsp has several fields and a 'search' button.
    On click of the 'search' button in child.jsp, data should be fetched from Database and should be populated in child.jsp, without submitting parent.jsp.
    I am able to fetch the data from DB. But unable to populate it in the same child window.
    How to achieve this?
    thanks
    Akash

    areee yaar...ajax and jsp are two different things altogther...whats harm in using ajax if most of the webapplication now deploy ajax for asynchronous call..

  • What's the problem in getting flash on the iPad2?

    I don't understand why there is no access to the Flash app when there is so much that requires it?

    Adobe has not been able to create a version that meets Apple's standards.
    Stedman

  • How can i set action on UITaBar and get event from that

    Hi All,
    I m doing one apps in which i have to add three UITabBarItem and this is UITabBarSystemItem.
    Now i cannot understand that how can i set action and get event from the?
    And how can i set various views on three tab bar item.
    I have to use UITabBar means i have to use UINavigationController+UITabBar
    My code id
    tabBar =[[UITabBar alloc] initWithFrame:CGRectMake(0,370,320,50)];
    tabBar.backgroundColor =[UIColor blackColor];
    UITabBarItem *search =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemSearch tag:0];
    UITabBarItem *recents =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemRecents tag:1];
    UITabBarItem *favorites =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemFavorit es tag:2];
    tabBar.items =[[NSArray arrayWithObjects:search,recents,favorites, nil] retain];
    tabBar.selectedItem = search;
    [myView addSubview:tabBar];
    [tabBar release];
    I add a action:
    UITabBarItem *search =[[UITabBarItem alloc] InitWithTabBarSystemItem:UITabBarSystemItemSearch tag:0 action:@selector(select:)];
    So it error: Warning -no'InitWithTabBarSystemItem:tag:action:' method fount
    So any can help me regarding it?

    Thanks RickMaddy very much.
    I read and do with sample at the View Controller Programming Guide . But when run it only view TabBar with title but haven't got any TabBarItem on it. I searched a few example about TabBar and i did, but i want do a form with a button then press on button it view a form with 2 TabBarItem on TabBar and press each TabBarItem will show correlative form page 1, page 2.
    UITabBarController *tabBarControl = [[[UITabBarController alloc] initWithNibName:nil bundle:nil] autorelease];
    tabBarControl.title = @"Tab bar";
    ViewControl1 *view1 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl1" bundle:nil] autorelease];
    ViewControl1 *view2 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl2" bundle:nil] autorelease];
    tabBarControl.viewControllers = [NSArray arrayWithObjects:view1,view2,nil];
    [self.navigationController pushViewController:tabBarControl animated:YES];

  • REJECT statment to break GET event is Obsolete in ECC 6.0 - Alternative?

    Hi Developers,
    REJECT statment is used to break from GET event (say GET PERNR event in Logical Database) used to process for an Employee.
    This REJECT statement is Obsolete . Is there any alternative for this ?
    If so, please reply at the earliest as it is very Urgent.
    Regards,

    Hi Suma,
    The REJECT statement was specially developed for leaving GET event blocks. Unlike CHECK and EXIT, REJECT always refers to the current GET event block. If CHECK and EXIT occur in a loop, they refer to the loop, and in a subroutine, they always refer to the subroutine. The REJECT statement, on the other hand, allows you to exit a GET event block directly from a loop or a called subroutine.
    The statement
    REJECT [dbtab].
    always terminates the processing of the current line of the node of the logical database. Without the optional dbtabspecification, the logical database automatically reads the next line of the same node, and the next GET event at the same hierarchy level is triggered. If you use the optional dbtab specification, the logical database reads the next line of the node dbtab. The node dbtab  must occur above the current node in the logical database hierarchy.
    Example
    The following executable program is connected to the logical database F1S.
    REPORT EVENT_DEMO.
    NODES: SPFLI, SFLIGHT, SBOOK.
    GET SFLIGHT.
      SKIP.
      WRITE: / 'Carrid:', SFLIGHT-CARRID,
               'Connid:', SFLIGHT-CONNID,
               'Fldate:', SFLIGHT-FLDATE.
      ULINE.
    GET SBOOK.
      PERFORM SUB.
    FORM SUB.
      WRITE: / 'Bookid:', SBOOK-BOOKID.
      REJECT 'SFLIGHT'.
    ENDFORM.
    This program reads and displays only the first booking for each flight, since the logical database reads the next line of SFLIGHT after the REJECT statement.

  • Problem with checkbox and run the get button event continuously

    Hi all,
    I have a checkbox list of 3 sensors. I have used the X-Control (for checkbox) found in the following link for my application https://decibel.ni.com/content/docs/DOC-30558. I have problems to achieve the following.
    Suppose i check Vibration and Strain, I should be able to display both Vibration and Strain data. (I should compare each element of 1d array with the string constant and run the case structure).
    I have to run the GET event continuously to display the data. 
    I have attached the code to the post.
    Please can anyone suggest how to go about this.
    thanks in advance
    Regards,
    KM
    Attachments:
    Main page Enhancements for Create and Load.vi ‏69 KB

    Hi Bob_Schor,
    I tried using the approach you mentioned. I cant run continuously. I am not able to figure out where i am going wrong. I have attached the updated vi. 
    Hi Hooovahh,
    The link you have posted seem to work with LV2013. I am currently using LV 2011. Can you please update it to 2011. Is OpenG necessary for this?
    Regards,
    KM
    Attachments:
    Main page Enhancements for Create and Load.vi ‏77 KB

  • I can't be the only person who has this problem - when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that

    I can't be the only person who has this problem with iCal- when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that.

    Yeah that works, but, it involves a click on the event, a click on edit, a click on the date, keystrokes, plus, since you can't see the next month you have to have a calendar in front of you so as to put it to the right date. It's easier just to cut it and advance the month and paste it, once you are in the right month you can move it around helter skelter willy nilly no problems. Although now that you mention it I will try it, maybe it is easier than cut and paste as I don't really care about the date, as long as it gets moved into the right month I can drag it around all I want.

  • Why does URLStream complete event get dispatched when the file is not finished loading?

    I'm writing an AIR kiosk app that every night connects to a WordPress server, gets a JSON file with paths to all the content, and then downloads that content and saves it to the kiosk hard drive. 
    There's several hundred files (jpg, png, f4v, xml) and most of them download/save with no problems.  However, there are two f4v files that never get downloaded completely.  The complete event does get dispatched, but if I compare the bytesTotal (from the progress event) vs bytesAvailable (from the complete event) they don't match up; bytesTotal is larger.  The bytesTotal (from the progress event) matches the bytes on the server. 
    The bytesLoaded in the progress event never increases to the point that it matches the bytesTotal so I can't rely on the progress event either.  This seems to happen on the same two videos every time. The videos are not very large, one is 13MB and the other is 46MB.  I have larger videos that download without any problems.  
    [edit] After rebooting the compter, the two videos that were failing now download correctly, and now it's a 300kb png file that is not downloading completely.  I'm only getting 312889 of 314349 bytes.
    If I paste the url into Firefox it downloads correctly, so it appears to be a problem with Flash/AIR.
    [edit] I just wrote a quick C# app to download the file and it works as expected, so it's definitely a problem with Flash/AIR. 
    Here's the code I'm using:
    package  {
        import flash.display.Sprite;
        import flash.events.Event;
        import flash.events.ProgressEvent;
        import flash.net.URLRequest;
        import flash.net.URLStream;
        [SWF(backgroundColor="#000000", frameRate="24", width="640", height="480")]
        public class Test extends Sprite {
            private var fileSize:Number;
            private var stream : URLStream;
            private var url:String = "http://192.168.150.219/wordpress2/wp-content/uploads/2012/12/John-Butler-clip1.f4v";
            public function Test() {
                if (stage)
                    init();
                else
                    this.addEventListener(Event.ADDED_TO_STAGE, init);
            private function init(e:Event=null):void {
                this.removeEventListener(Event.ADDED_TO_STAGE, init);
                stream = new URLStream();
                stream.addEventListener(ProgressEvent.PROGRESS, onLoadProgress);
                stream.addEventListener(Event.COMPLETE, onLoadComplete);
                stream.load(new URLRequest(url));
            private function onLoadProgress(event:ProgressEvent):void {
                fileSize = event.bytesTotal;
                var percent:Number = event.bytesLoaded / event.bytesTotal * 100;
                trace(percent + "%");
            private function onLoadComplete(event:Event):void {
                trace("loaded", stream.bytesAvailable, "of", fileSize);
                // outputs "loaded 13182905 of 13184365"
                // so why is it "complete" when it isn't finished downloading?

    Thanks for your quick reply !
    I am relatively new to programming so please bear with me on this as I still haven't managed to grasp some of those things that "make perfect sense". If I am setting mouseEnabled to false doesn't that mean that the object no longer gets MouseEvents ?
    If I have understood you correctly then once the mouseEnabled is set to false the btn object is removed from the objects recognizable by the mouse - hence dispatching a mouseout event (and I am guessing here) from the mouse?
    I still don't get it though, if the listeners are set to the object and the object is no longer accessible to the mouse why is the event still being dispatched ?
    I get it that the making of the object unavailable to the mouse causes the "removing" (deactivating) of the object from under the mouse,
      step 1. deactivate object, and  step 2. (as a result of step 1) register the removal of the object.
    but why is the mouse still listening after step 1?
    Even if the action is that of "out" (as in the object is no longer under the mouse) it still is an action isn't it ? so haven't we turned off the listening for actions ?
    I promise I am not trying to drive you crazy here, this is just one of those things that I really want to get to the root of !
    Thanks,

  • Problem with onSelect event for DropdownbyIndex in the IView

    Hello ,
    I have an webdynpro for java application where I am using Dropdownby Index. I have associated onSelect event for the dropdown by index. When I launch the application in the standalone mode ( direct application launch) every thing works fine. The onSelect event for the dropdown is also working fine.
    I have made an Iview of the webdynpro application. Here on select of the dropdown box  I am getting a java script error "Access Denied". Please can you suggest me how do I correct this strange problem .
    I have developed the webdynpro application in NW640 SP15 .
    Thanks in advance for the help
    V Vinay

    Hi Vinay,
    Does the portal and the application inside of the iView run both on HTTP or HTTPs? Mixing them is not possible.
    Best regards,
    Thomas

  • Hi, I have problems in ordering book from iPhoto. It says "problems in getting contact with Apple Online Store" I have changed password on my Apple ID - could that be the problem ??

    Hi, I have problems in ordering book from iPhoto. It says "problems in getting contact with Apple Online Store" I have changed password on my Apple ID - could that be the problem ??

    Some additional efforts you can try:
    Go to the System/Sharing preference pane and make sure Remote Apple Events is checked.
    If it is, uncheck it and then recheck and try ordering again.
    OT

  • HOW CAN I GET RID OF THE EVENTS CATEGORY?

    There are days that I will add only one picture to iPhoto and it becomes an event. Every time I add a new picture to iPhoto 8 I get a new event. This past week I have been renaming some albums and adding new albums and folders and that has had a very undesired result of now telling me I have 26,624 items in 3,071 events. That, 26,624 number, incidentally, is the same number of photos I have in iPhoto.
    If I try to delete an event, I find I am also deleting the pictures in that event from my main iPhoto library. I have also noticed that the events in my events area are randomly numbered, not in any sort of order.
    HELP!!!!!!!!!!!!!!!!!!!!!!!!!!
    Also, iPhoto 8 does not recognize my camera (Canon PowerShot S5IS) when I try to add photos to iPhoto.

    cmiles:
    Welcome to the Apple Discussions. You can't get rid of the Events mode as it's the basic container feature of iPhoto which is organized by date. You can always drag that single event onto another one in the Event mode to join them, thus getting rid of the single event. You can also do that in the Photos mode, with Event names displayed so it's like the old rolls, by dragging a photo or photos into another event.
    Regarding the problem of the camera not being recognized that's a tougher problem to fix. A workaround is to use Image Capture to upload the photos to a folder on the desktop and then import the folder into iPhoto.
    One user fixed his similar problem with an Archive and Install of Leopard and a reinstall of iPhoto from the disk it came on. As I said, not as easy a fix.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • At event calendering site, getting message "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." Javascript is ENABLED on my computer.

    I'm trying to submit an event to the events calendar at http://calendar.jtnews.net/events/index.php?com=submit. After I enter the Authentication words and press Enter, I get the message, "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." According to my Firefox/Tools, etc., button, Javascript is enabled. I

    Hello mjswooosh,
    I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
    We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
    I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
    Sincerely,
    John|Social Media Specialist | Best Buy® Corporate
     Private Message

Maybe you are looking for