PROBLEM OMT4 - INSERT M3 406 IN TABLE V_160M

Hello everyone,
Iu2019ve to insert a message into OMT4 transaction, to make it warning.
My message is M3 406, and I cannot include in OMT4, so I looked at any suggestions and I found this, that sounds really my answer
Goto SM30
Enter the Table/View - V_160M
Click on maintain
Click on new entries & maintain the message M3 -131.
I did these steps to include my message M3 406, But in table V_160M the system does not allow me to insert M3 (even if it is present in match code). Error "PLEASE SPECIFY A LEGAL VALUE"
Why, since I've already other 3 entries in this way
M3 128
M3 132
M3 148
M3 159
M3 347
M3 348
M3 767
M3 818
and I want to include also M3 406??
Thanks a lot in advance
Chiara

Eduardo is right. this message is a hardcoded error message. Not each message can be customized, because just warnings would allow to create inconsitencies.
Just read the wording in the message long text, for me it clearly indicates that this is hard error.
NA M3406
Short Text
The costing lot size must not be smaller than the price unit
Diagnosis
You have specified a costing lot size that is smaller than the price unit. Since costing is always based on the costing lot size, this constellation is not allowed since it could result in rounding problems when determining new prices.
Procedure
Change the price unit (on either the Costing screen or Accounting screen as appropriate) and/or costing lot size.

Similar Messages

Problem in inserting data into MySQL table

Hi All,
I have a table with just two fields FIRSTNAME and SECONDNAME in MySQL. I am accepting the First Name and Second Name in two text fields and then trying to insert them into the MySQL table. I have set the concurrency of the rowset to CONCUR_UPDATABLE and am using the code clip for Database row insert with the appropriate changes. When I run the application it doesnt give me any errors but the data is also not inserted in the table. Can someone pls help me out.
Loneliness wins the race :-)

This is my problem when inserting single row. What does it means ?
MusicInsert: com.mysql.jdbc.NotUpdatable: Result Set not updatable.This result set must come from a statement that was created with a result set type of ResultSet.CONCUR_UPDATABLE, the query must select only one table, and must select all primary keys from that table. See the JDBC 2.1 API Specification, section 5.6 for more details

Problem while inserting into a table which has ManyToOne relation

Problem while inserting into a table *(Files)* which has ManyToOne relation with another table *(Folder)* involving a attribute both in primary key as well as in foreign key in JPA 1.0.
Relevent Code
Entities:
public class Files implements Serializable {
@EmbeddedId
protected FilesPK filesPK;
private String filename;
@JoinColumns({
@JoinColumn(name = "folder_id", referencedColumnName = "folder_id"),
@JoinColumn(name = "uid", referencedColumnName = "uid", insertable = false, updatable = false)})
@ManyToOne(optional = false)
private Folders folders;
public class FilesPK implements Serializable {
private int fileId;
private int uid;
public class Folders implements Serializable {
@EmbeddedId
protected FoldersPK foldersPK;
private String folderName;
@OneToMany(cascade = CascadeType.ALL, mappedBy = "folders")
private Collection<Files> filesCollection;
@JoinColumn(name = "uid", referencedColumnName = "uid", insertable = false, updatable = false)
@ManyToOne(optional = false)
private Users users;
public class FoldersPK implements Serializable {
private int folderId;
private int uid;
public class Users implements Serializable {
@Id
@GeneratedValue(strategy = GenerationType.IDENTITY)
private Integer uid;
private String username;
@OneToMany(cascade = CascadeType.ALL, mappedBy = "users")
private Collection<Folders> foldersCollection;
I left out @Basic & @Column annotations for sake of less code.
EJB method
public void insertFile(String fileName, int folderID, int uid){
FilesPK pk = new FilesPK();
pk.setUid(uid);
Files file = new Files();
file.setFilename(fileName);
file.setFilesPK(pk);
FoldersPK folderPk = new FoldersPK(folderID, uid);
// My understanding that it should automatically handle folderId in files table,
// but it is not…
file.setFolders(em.find(Folders.class, folderPk));
em.persist(file);
It is giving error:
Internal Exception: java.sql.SQLException: Field 'folderid' doesn't have a default value_
Error Code: 1364
Call: INSERT INTO files (filename, uid, fileid) VALUES (?, ?, ?)_
_ bind => [hello.txt, 1, 0]_
It is not even considering folderId while inserting into db.
However it works fine when I add folderId variable in Files entity and changed insertFile like this:
public void insertFile(String fileName, int folderID, int uid){
FilesPK pk = new FilesPK();
pk.setUid(uid);
Files file = new Files();
file.setFilename(fileName);
file.setFilesPK(pk);
file.setFolderId(folderId) // added line
FoldersPK folderPk = new FoldersPK(folderID, uid);
file.setFolders(em.find(Folders.class, folderPk));
em.persist(file);
My question is that is this behavior expected or it is a bug.
Is it required to add "column_name" variable separately even when an entity has reference to ManyToOne mapping foreign Entity ?
I used Mysql 5.1 for database, then generate entities using toplink, JPA 1.0, glassfish v2.1.
I've also tested this using eclipselink and got same error.
Please provide some pointers.
Thanks

Hello,
What version of EclipseLink did you try? This looks like bug https://bugs.eclipse.org/bugs/show_bug.cgi?id=280436 that was fixed in EclipseLink 2.0, so please try a later version.
You can also try working around the problem by making both fields writable through the reference mapping.
Best Regards,
Chris

Problem in Insertion into table through After Report Parameter form trigger

Hi All,
I am getting problem in inserting some data into temp table through Report.
My requirement is like that, I have to do a calculation based on user parameters, and then insert the data into the temp table. I wanted to do this into After Report Parameter form trigger function. I have done all the calculation and wrote all the insert statement in that function. There is no problem in compilation. then I am taking value from this temp table in my formula columns.
When I run this report, it hangs, don't understand what is the problem.Can anybody help me out in this.
Thanks,
Nidhi

The code is as follows:
function AfterPForm return boolean is
CURSOR CUR_RECEIPT(RECEIPT_NUM_FROM NUMBER, RECEIPT_NUM_TO NUMBER) IS
SELECT DISTINCT receipt, item_no FROM xxeeg.xxeeg_1229_sp_putaway WHERE RECEIPT BETWEEN
RECEIPT_NUM_FROM AND RECEIPT_NUM_TO ;
V_CUR_RECEIPT CUR_RECEIPT%ROWTYPE;
begin
OPEN CUR_RECEIPT(:RECEIPT_NUM_FROM, :RECEIPT_NUM_TO);
FETCH CUR_RECEIPT
INTO V_CUR_RECEIPT;
LOOP
EXIT WHEN CUR_RECEIPT%NOTFOUND;
IF V_CUR_RECEIPT.ITEM_NO = 'TEST1' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 12
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 13
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 14
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
IF V_CUR_RECEIPT.ITEM_NO = 'TEST2' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 16
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 17
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 18
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 19
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 20
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 21
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
END IF;
END IF;
END LOOP;
COMMIT;
CLOSE CUR_RECEIPT;
return(TRUE);
end;
.....................................................................................................................

Problem - insert JSON string into table in CLR function

Hi
I create a CLR function to insert JSON string into table.
With this line
mt = JsonConvert.DeserializeObject<MyTable>(jsonStr.ToString());
The class is OK (no error), but when I try to add the Assembly in Microsoft SQL Server Management Studio, it has error :
Assembly 'newtonsoft.json, version=4.5.0.0, culture=neutral, publickeytoken=30ad4fe6b2a6aeed.' was not found in the SQL catalog.
(I have Newtonsoft.Json in the Reference)
Please help !
Thanks

Hi Bob
Could you elaborate a bit more?
I think the code is ok. The problem is when I deploy the Visual Studio creates/alters the assembly, and get the error
Error: SQL72014: .Net SqlClient Data Provider: Msg 6503, Level 16, State 12, Line 1 Assembly 'newtonsoft.json, version=6.0.0.0, culture=neutral, publickeytoken=30ad4fe6b2a6aeed.' was not found in the SQL catalog.
ALTER ASSEMBLY [Database1]
FROM 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
An error occurred while the batch was being executed.
Done building project "Database1.sqlproj" -- FAILED.
This is my FillRow function. Without the bold line, the everything is fine. I can create the assembly, then create the SQL function. Done. When I call select from the SQL function, it returns 10 rows as expected.
public static IEnumerable getTable(SqlString jsonStr)
ArrayList resultCollection = new ArrayList();
MyTable mt;
//mt = JsonConvert.DeserializeObject<MyTable>(jsonStr.ToString());
int c = 1;
while (c < 10)
mt = new MyTable();
mt.GlobalId = c.ToString();
mt.DateSet = "DS=!=" + c.ToString();
mt.Timestamp = "TS==" + c.ToString();
mt.PartnerId = "PI==" + c.ToString();
mt.PartnerUserId = "PUI=" + c.ToString();
mt.UserIP = "UIP=" + c.ToString();
mt.UserAgent = "UG=" + c.ToString();
mt.Referer = "R=" + c.ToString();
resultCollection.Add(mt);
c++;
//resultCollection.Add(mt);
return resultCollection;

Inserting data from one table into another table using PL/SQL

HI,
I am trying to insert values from one table into another using PL procedure, the values I want to retrieve from the table riverside1 are charac_id and charac_type and insert these values into another table called riverside2 , the stored procedure zorgs_gorfs(x,y) accepts two parameters which are 2 charac_id's of d characters in riverside1 then using insert statements inserts these characters from riverside1 into riverside2.
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id)
          VALUES
               (x);
INSERT INTO riverside2
               (charac_id)
          VALUES
               (y);
      END zorgs_gorfs;
/This works but the problem im having is that when I also try to insert the charac_type as well as the charac_id it doesnt work below is the code:
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);
      END zorgs_gorfs;
/can someone kindly sort me out

modify this sql
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);as
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id in ( x,y));But my suggestion would be consider revising your approach. It does not look that good.
Thanks,
karthick.

Insert data from a table into 5 different tables

My application has a data block than display information from another table. From this data block, the user has the option to select the records for upload. The information in the data block is used to insert data into 5 different tables. So if any exception occurs while inserting, the whole process should be rollback, but before this happen a record is inserting in a failed table indicated the reason of the failed.
For this process I use the following commands:
1.     sp_name := Get_Application_Property(SAVEPOINT_NAME);
2.     INSERT DDL
3.     INSERT DDL
4.     INSERT DDL
5.     INSERT DDL
6.     INSERT DDL
7.     If Other Exception then ISSUE_ROLLBACK(sp_name) Otherwise FORMS_DDL ('commit')
The problem the previous insert(s) rollback
Thanks,

Hi,
If you are using FORMS_DDL built-in to insert the data, then after each FORMS_DDL statement, you have to check the values of FORM_SUCCESS or FORM_FAILURE built-ins.
FORMS_DDL('<insert_statement_1>');
IF FORM_FAILURE THEN
<the statement fails. so have to be rollbacked>
END IF;
FORMS_DDL('<insert_statement_2>');
IF FORM_FAILURE THEN
<the statement fails. so have to be rollbacked>
END IF;Hope this helps.
Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly

Error while Inserting data into flow table

Hi All,
I am very new to ODI, I am facing lot of problem in my 1st interface. So I have many questions here, please forgive me if it has irritated to you.
========================
I am developing a simple Project to load a data from an input source file (csv) file into a staging table.
My plan is to achieve this in 3 interfaces:
1. Interface-1 : Load the data from an input source (csv) file into a staging table (say Stg_1)
2. Interface-2 : Read the data from the staging table (stg_1) apply the business rules to it and copy the processed records into another staging table (say stg_2)
3. Interface-3 : Copy the data from staging table (stg_2) into the target table (say Target) in the target database.
Question-1 : Is this approach correct?
========================
I don't have any key columns in the staging table (stg_1). When I tried to execute the Flow Control of this I got an error:
Flow Control not possible if no Key is declared in your Target Datastore
With one of the response (the response was - "FLOW control requires a KEY in the target table") in this Forum I have introduced a column called "Record_ID" and made it a Primary Key column into my staging table (stg_1) and my problem has been resolved.
Question-2 : Is a Key column compulsary in the target table? I am working in BO Data Integrator, there is no such compulsion ... I am little confused.
========================
Next, I have defined one Project level sequence. I have mapped the newly introduced key column Record_Id (Primary Key) with the Project level sequence. Now I am got another error of "CKM not selected".
For this, I have inserted "Insert Check (CKM)" knowledge module in my Project. With this the above problem of "CKM not selected" has been resolved.
Question-3 : When is this CKM knowledge module required?
========================
After this, the flow/interface is failing while loading data into the intermediar ODI created flow table (I$)
1 - Loading - SS_0 - Drop work table
2 - Loading - SS_0 - Create work table
3 - Loading - SS_0 - Load data
5 - Integration - FTE Actual data to Staging table - Drop flow table
6 - Integration - FTE Actual data to Staging table - Create flow table I$
7 - Integration - FTE Actual data to Staging table - Delete target table
8 - Integration - FTE Actual data to Staging table - Insert flow into I$ table
The Error is at Step-8 above. When opened the "Execution" tab for this step I found the message - "Missing parameter Project_1.FTE_Actual_Data_seq_NEXTVAL RECORD_ID".
Question-4 : What/why is this error? Did I made any mistake while creating a sequence?

Everyone is new and starts somewhere. And the community is there to help you.
1.) What is the idea of moving data from stg_1 and then to stg_2 ? Do you really need it for any other purpose other than move data from SourceFile to Target DB.
Otherwise, its simple to move data from SourceFile -> Target Table
2.) Does your Target table have a Key ?
3.) CKM (Check KM) is required when you want to do constraint validation (Checking) on your data. You can define constraints (business rules) on the target table and Flow Control will check the data that is flowing from Source File to Target table using the CKM. All the records that donot satisfy the constraint will be added to E$ (Error table) and will not be added to the Target table.
4.) Try to avoid ODI sequences. They are slow and arent scalable. Try to use Database sequence wherever possible. And use the DB sequence is target mapping as
<%=odiRef.getObjectName( "L" , "MY_DB_Sequence_Row" , "D" )%>.nextval
where MY_DB_Sequence_Row is the oracle sequence in the target schema.
HTH

Problem while inserting a record to infotype 416

Iam facing a problem while inserting a record to the infotype 416 for a personnel no using the FM 'HR_INFOTYPE_OPERATION'.I have created a FM to insert a record to the infotype 416.In that FM iam using the FM 'HR_INFOTYPE_OPERATION' to create a record for infotype 416.while executing my FM the FM 'HR_INFOTYPE_OPERATION' is returning the return value 0.But when i check in PA30 for the infotype 416,there is no record created for that personnel no.Also in the table PA0416 the record is not get created.SO what might be the problem.can anyone please provide me help on this.
I have attached the code of my FM for ur reference.
FUNCTION Y_ESS_FL_ENCASH.
DATA: G_COMPENSATION_AMOUNT LIKE PA0416-AMONT,
      G_RETURN TYPE BAPIRETURN1.
DATA T_PA0416 LIKE P0416 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'HR_READ_INFOTYPE'
    EXPORTING
       TCLAS                 = 'A'
       PERNR                 = '00000014'
       INFTY                 = '0416'
     BEGDA                 = sy-datum
     ENDDA                 = sy-datum
       BYPASS_BUFFER         = 'X'
     LEGACY_MODE           = ' '
IMPORTING
     SUBRC                 =
      TABLES
        INFTY_TAB             = T_PA0416
EXCEPTIONS
INFTY_NOT_FOUND       = 1
OTHERS                = 2
    LOOP AT T_PA0416
    WHERE SUBTY = '1002'.
    ENDLOOP.
    IF SY-SUBRC <> 0.
      CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
        EXPORTING
           NUMBER = '00000014'
        IMPORTING
           RETURN = G_RETURN.
      IF SY-SUBRC <> 0.
         MESSAGE I016(RP) WITH ' RECORD IS ALREADY LOCKED'.
      ENDIF.
      T_PA0416-PERNR = '00000014'.
      T_PA0416-SUBTY = '1002'.
      T_PA0416-INFTY = '0416'.
      T_PA0416-OBJPS = ''.
      T_PA0416-SPRPS = ''.
      T_PA0416-SEQNR = ''.
      T_PA0416-AEDTM = SY-DATUM.
      T_PA0416-UNAME = SY-UNAME.
      T_PA0416-ENDDA = SY-DATUM.
      T_PA0416-BEGDA = SY-DATUM.
      T_PA0416-NUMBR = '10'.
      T_PA0416-WGTYP = '1530'.
      T_PA0416-AMONT = '15000'.
      T_PA0416-WAERS = 'INR'.
      T_PA0416-QUONR = '1'.
      APPEND T_PA0416.
      CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          INFTY                  = '0416'
          NUMBER                 = '00000014'
          SUBTYPE                = '1002'
OBJECTID               =
LOCKINDICATOR          =
         VALIDITYEND            = '31129999'
         VALIDITYBEGIN          = SY-DATUM
        RECORDNUMBER           = ''
          RECORD                 = T_PA0416
          OPERATION              = 'INS'
          TCLAS                  = 'A'
DIALOG_MODE            = '0'
        NOCOMMIT               = 'X'
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
        IMPORTING
          RETURN                 = G_RETURN.
KEY                    =
      IF G_RETURN+0(1) EQ 'E'.
              MESSAGE I086(ZHR) WITH 'Record is not inserted in IT416'.
      ELSE.
          COMMIT WORK.
      ENDIF.
      CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
        EXPORTING
          NUMBER = '00000014'
        IMPORTING
          RETURN = G_RETURN.
    ENDIF.
ENDFUNCTION.

Hi Murthy
With a first glance, I think you have given a wrong parameter value to "validityend". It should be '99991231' not '31129999' .
If your problem still persists, try inserting the data online from PA30. If your input causes no errors, then please state what the return parameter contains.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Error while inserting rows in a table

Hi,
We have recently migrated from 9i to 10g. We have a scheduled job out our DB which first deletes all the rows from a table and then inserts them back by selecting rows from 5 tables. This table has a composite primary key based on 6 columns in it. In 9i, when i try to insert rows into the table after deleting all the rows from it, I am able to insert the data successfully . However, in 10g, when i try doing the same operation, it fails with the ORA error:
ORA-00001: unique constraint violated
The same query which works perfectly in 9i fails in 10g
If anybody has some ideas on how to resolve the same, kindly let me know.
Thanks in advance.

Hi,
I was finally able to resolve the reason behind that error message and found it even more weird. The error was because I was using the substr function for extracting the characters 1-4 from a column which is 5 characters long. When i specify the query as:
select substr(column1, 1, 4)) from table1;
only the characters 1-3 are retrieved. Now if i change the query to select substr(column1, 1, 5)) from table1, in that case also only 3 characters are retrieved although i have specified the substr to start from 1 and read till 5 characters. Also, when i run the query:
select length(substr(column1, 1, 4)) from table1 or select length(substr(column1, 1, 5)) from table1
I get the answer as 3.
However, the most amazing part is that the query is working perfectly in 9i and is retrieving the data correctly i.e. from substr 1-4.
Can anyone suggest what the problem could be?
Thanks
Edited by: CrazyAnie on May 13, 2009 1:34 AM

A problem with inserting into DB hebrew strings

Hi,
I am working with a 8.1.7 DB version, and use thin driver.
I have my DB Charest configured to iso 8859P8 (which is visual Hebrew)
I have no problem in making a connection and retrieving strings, using SELECT * FROM ..
and then use the ResultSet.getString(String columnName) method .
I also have no problem in inserting the Hebrew characters , and retrieving them back ( I represent them in a servlet ),
The only problem I do have, is when I try to insert into DB a row in the following manner
INSERT into table_name values( Hebrew_String_value1, Hebrew_String_value2, Hebrew_String_value3, Hebrew_String_value4)
the insertion works fine , but somehow the insertion misplaces the strings order and actually the insertion is in opposite order :
Hebrew_String_value4, Hebrew_String_value3, Hebrew_String_value2, Hebrew_String_value1.
If I use the same insert with English Strings , there is no problem.
does any one have the solution how I insert the strings in the right order ?
one solution I have is to insert only one column and then update the table for each column , but then , instead of one execute() action , I have to make ,
1 execute() + 9 executeUpdate() for a 10 column table

Can you try specify the column order in your INSERT statement, i.e.
INSERT INTO mytable( column1_name,
                     column2_name,
                     column3_name,
                     column4_name )
             VALUES( column1_string,
                     column2_string,
                     column3_string,
                     column4_string)My wild guess, though I can't understand why at the moment, is that there may be a problem because Hebrew is read from right to left, that may be causing a problem.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Need to insert data in 2 tables thro stored procedure

I need to create a stored procedure which will insert data in two tables. The procedure will get
its inputs from an Oracle Developer Form which will be inserted into the tables.
The 2 tables structure:
1.FEES_MASTER
Name Null? Type
FEES_ID NOT NULL NUMBER(8) -- Primary Key
CS_ID NOT NULL NUMBER(8) -- Class Student ID; An enrolled student
REC_DATE NOT NULL DATE -- Fees receipt date
REC_AMOUNT NOT NULL NUMBER(6) -- Fees receipt amount
2.FEES_DETAIL
Name Null? Type
FEES_ID NOT NULL NUMBER(8) -- Foreign Key
MONTH NOT NULL DATE -- First of each month to identify fee month
Scenario:
A student submits fees for 3 months through Master/Detail related blocks in a Developer Form as
Under:
Fees Master
Fees ID : 11002
Class Student ID : 356
Receipt Date : 06-JAN-2001
Receipt Amount : 1500
Fees Detail
Fees ID Fees Month
11002 01-JAN-2001
11002 01-FEB-2001
11002 01-MAR-2001
I need to check each fees detail record for fees month duplication as well before inserting new records.
How can this be achieved?
Thanks in advance.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Fan Liu ([email protected]):
create primary key in the detail table. i think it's FEES_ID + MONTH. then mark the columns in Forms as primary key property true, then call check_record_uniqueness built-in in on-check-unique trigger.<HR></BLOCKQUOTE>
Thanks very much. But what I need is to ensure transaction integrity thro stored procedure. The system allows a certain CS_ID (i.e. Class Student ID, which is assigned a new one to every student annually) to submit fees for 12 months only, because a student stays in a class for a year. The 2 columns in the FEES_DETAIL table are composite primary key which only ensures that a certain FEES_ID will not be repeated for the same month. But suppose:
1)this data already exist in the tables:
Fees Master
Fees ID : 11002
Class Student ID : 356
Receipt Date : 06-JAN-2001
Receipt Amount : 1500
Fees Detail
Fees ID Fees Month
11002 01-JAN-2001
11002 01-FEB-2001
11002 01-MAR-2001
2)And this data is currently being inserted:
Fees Master
Fees ID : 11300
Class Student ID : 356
Receipt Date : 04-FEB-2001
Receipt Amount : 1500
Fees Detail
Fees ID Fees Month
11300 01-JAN-2001
11300 01-FEB-2001
11300 01-MAR-2001
The data in the 2nd condition is perfectly valid but the application can't allow a student to submit fees for a month which he has already submitted. Now only a stored procedure can make sure after checking that the same student doesn't pay fees for duplicate months. Another reason for my emphasis on stored procedure is that what if a user tries to insert data thro an SQL* Plus session instead of the Form.
PROBLEM: Now the problem I am having is I don't know how the procedure will take input for multiple records from the FEES_DETAIL block in the Form.
Please assist in this regard. Thanks.

Help in inserting rows into a table

I have a table called acct_fact,
I need to insert rows in the table using a script but the problem is there's a column called seq_nbr which has random seq nbr of 14character length like 'ZWX98MGD9MVAD6J','ZWX98MG67RVAD6J' etc.,
While inserting rows I need to generate such seq_nbr for those columns and insert rows into the table, can I use any such mechanism in my insert query to insert such random nbr's while inserting rows into a table.
If so please suggest me

Hi Peter,
Thankyou for the quick reply:)
can you suggest me how to implement it here in my script snippet:
while read var_acct_nbr
do
echo "update acct_attr set acct_attr_exp_dt ='$ExpDate' where Acct_Attr_Value_Text='15' and acct_attr_exp_dt is null and person_id='LDCarrBillAgrm' and acct_nbr='$var_acct_nbr' ;" >> ./$DirectoryName/SQLQuery_$TimeStamp.sql
echo "insert into acct_fact values ('$var_acct_nbr','$ExpDate','$ExpTime','*seq_nbr*','N','ProjTereza','Remoção de acordo d; data de expiração: $ExpDate',null,'1','LDE',null);" >> ./$DirectoryName/SQLQuery_$TimeStamp.sql
done < ./$DirectoryName/ExpireAccts_$TimeStamp.LOG
the script takes each acct_nbr nbr form a input file and fires an insert statement.
The one in bold is the column where such sequence need to be inserted.can you help me in implementing the way you suggested in my script i.e., insert statement
Thanks in Advance:)
Edited by: rkrish on Jun 27, 2012 3:04 AM

Problem on inserting text from file to a clob column

Hi! I'm having problem in inserting text read from a text file to a clob column in my table.
Here's my code
public void addSyllabusOutline(int syllid)
          CLOB objclob1 = null;
          CLOB objclob2 = null;
          String query = "SELECT outline, projoutline FROM Syllabus WHERE syllabusid = '"+ syllid +"' FOR UPDATE";
          try
               System.out.print("Getting syllabus outline and projoutline clob locator...");
               DBConnection dbconnbean = new DBConnection();
               dbconnbean.openConnection();
               ResultSet rst = dbconnbean.executeQuery(query);
               if(rst.next())
                    objclob1 = (oracle.sql.CLOB)rst.getClob("outline");
                    objclob2 = (oracle.sql.CLOB)rst.getClob("projoutline");
                    Writer clobwriter1 = ((oracle.sql.CLOB)objclob1).getCharacterOutputStream();
                    String filename1 = "c:\\o1u2t3l4i5n6e7.txt";
                    File outlinefile1 = new File(filename1);
                    FileReader outlineFileReader1 = new FileReader(outlinefile1);
                    char[] cbuffer1 = new char[10 * 1024];
                    int nread1 = 0;
                    while((nread1 = outlineFileReader1.read(cbuffer1)) != -1)
                         clobwriter1.write(cbuffer1, 0, nread1);
                    //clobwriter1.flush();
                    clobwriter1.close();
                    Writer clobwriter2 = ((oracle.sql.CLOB)objclob2).getCharacterOutputStream();
                    String filename2 = "c:\\p1r2o3j4o5u6t7l8i9n0e.txt";
                    File outlinefile2 = new File(filename2);
                    FileReader outlineFileReader2 = new FileReader(outlinefile2);
                    char[] cbuffer2 = new char[10 * 1024];
                    int nread2 = 0;
                    while((nread2 = outlineFileReader2.read(cbuffer2)) != -1)
                         clobwriter2.write(cbuffer2, 0, nread2);
                    //clobwriter2.flush();
                    clobwriter2.close();
               System.out.println("done");
               dbconnbean.closeConnection();
          catch(Exception e)
               System.out.println("Error: " + e);
My error is java.sql.SQLException fetch out of sequence. I don't have an Idea on what seems to be the problem. Please help.. Thank you very much. ^_^

Hi,
Print the whole stack trace. It will tell you the line which causes the error. How you use clob and blob in oracle is also version dependent. Try to google for
oracle "your version" java clob example.
/Kaj

Need to Insert Records in target table.

Hi All,
This is my first thread in this forum.
My source table name is Emp and Target table name is Emp_Org.
Given below is the structure of the source table
Empno(p.key) deptno(p.key) empname currenttimestamp
Target Table MetaData.
Empno(p.key) country Emporg currenttimestamp Targettimestamp
My problem is In my source table I have 10000 records. While I run the job, out of 10000 records only 4000 records are Inserted into the target table. If I run the job again, I need to run the job from 4001 onwards not from the begining.
I don't know exactly how can I write a sql for above logic.
I don't have idea how to do this?. Any help would be really appreciated.
Edited by: 896227 on Nov 9, 2011 3:46 AM

Welcome to the forum.
You can try your hands on MERGE while performing the INSERT operation
Something like this
MERGE INTO Emp_Org eo
USING (
          select Empno,deptno,empname,currenttimestamp from Emp
       ) x
ON (
               eo.Empno      = x.Empno
WHEN NOT MATCHED THEN
     INSERT
          Empno,
          country,
          Emporg,
          currenttimestamp,
          Targettimestamp
     VALUES
          x.Empno,
          'USA', /* Used Constant here */
          'Emporg', /* Used Constant here */
          x.currenttimestamp,
          sysdate /* Used Constant here */
     );If you are not ok with the solution, then provide some sample data with expected output

PROBLEM OMT4 - INSERT M3 406 IN TABLE V_160M

Similar Messages

Maybe you are looking for