Problem: Publishing Category not beeing transmitted to Catalogs

Hi people!
When i am finished doing the full deployment in BCC with merchadising the assets data in publishing schema is not being persisted in catalogs schemas(CATA and CATB).
Does anyone have pass through this problem and could give me a help.
Thanks.

Hi，
Did you install the root CA certificate into the Trusted Root Certificate Authorities under the Current User store?
Based on my experience, it should be added into Certificates (Local Computer).The Current User certificate store is local to a user account on the computer, but the Local Computer certificate store is local to the computer and is global to all users on the
computer.
You can follow the steps in the article below to view the certificate stores for the computer:
How to: View Certificates with the MMC Snap-in
Best regards,
Susie

Similar Messages

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

ISight Problem - cant use it anymore while not beeing recognized...

hello,
the well known classical problem. no application can recognize my iSight any longer.
had done the recommendings from apple support site without any success. sometimes the isight works - for example one time in 3 weeks - than again not.
i am angry about the fact that apple dont create some patch or whatever to solve this problem. any other suggestions instead of this:
http://www.codium.co.nz/isight_fix/
which had worked for me one time?
so i pay a lot of money for this macbook pro and cant use it completely. but yes - it looks sooooooo nice.
great job apple guys, much more bigger job - mr. job. so solve this problem. i am not the only one if you just use google for one time.

ResEdi wrote:
hello,
the well known classical problem. no application can recognize my iSight any longer.
had done the recommendings from apple support site without any success.
You have not tried all recommendings:
Final relevant suggestion from http://support.apple.com/kb/HT2090
"If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service."
...sometimes the isight works - for example one time in 3 weeks - than again not...
Intermittent problems like yours are usually caused by hardware problems. Regardless of whether your MBP is still in warranty or covered by AppleCare, your AASP can fix your MBP.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

API User Hook for Restricting Category Creation in a sepcific catalog

Q: API User Hook for Restricting Category Creation in a sepcific catalog by a specific responsibility. I want to capture GO button process event?
Hi All,
Can anyone help me if anyone have used user hook for OLM? My requirement is to restrict course creation for the specific category... when we select category and select course and click on go button which process is calling? How can we identify the BP Package and Procedure name of that GO button?
urgent reply shall be a great help.
thank you.
Regards,
AD

OK, I just tried to insert an element entry from the API and it works perfectly
The problem seems to be coming from the form. Is the form not using an API?
If this is the case, should I do a personalization and run a PL/SQL procedure each time a change is made?

Product Category not transferred from CCM 1.0 to Shopping Cart

Hello all,
I have a problem where user choose item from integrated SAP catalog CCM 1.0 and add it to the shopping cart (EBP is 5.0).
When SC is displayed Category is different than in catalog.
I have only one backend (R/3 4.7) working in classic scenario.
During testing I copied material groups several times from the same backend with TCode R3AS but using FM BBP_CATEGORY_GET_GUID I checked that I have only one GUID per product grup in EBP.
User does not have default category.
In OrgStructure > Extended Attributes there is no limit on Product Categories ("*" for backend system). In this case EBP is always using alphabetically the first listed category.
If I list categories in Extended Atributes, system always use the first listed and not the proper one from the catalog.

Hello Vadim,
I should be now red due to the mistake that I made in catalog files.
In file for Supplier Catalog I did not include /ccm/product_group. After I did it everything went OK. I was thinking that CategoryID is enough. :blush:
Your answer pointed me to right direction.
Gordan
P.S. Instead of inserting breakpoints you can use procedure explained in note 847229 "OCI data passed from CCM/SRM"
Message was edited by: Gordan Flego

BIP report security from Dashboard to Publisher is not working

Hi ,
I created a BIP report(.xdo) and placed it on Dashboard as a link . As admin , I can see the report . As a user , I am able to get into publisher but not able to see the report . Iam getting the below error message .
Error : Unauthorized Access: please contact the administrator.
I suspect that security model from Dashboard through BIP is not working . I tried searching the online resources but couldnt find right help .
Iam a newbie for BIP , I followed the regular BIP guides , configured eveything as per the docs and things work as admin . But I want to test the security as user .
Where Iam doing wrong , Any ideas please help .
Thanks
Karthik

Hello Vijay ,
I have grant permissions to the user and the report in BI webcatalog and also in BIP under admin tab I have addes the role which the user belongs to and also the shared folder . Still the problem exists.
My BI presentation servcies security is working . My user security is also working , all that I need is the user should be able to see the report when he clicks on BIP link placed in dashboard.

PSE 11 Catalog not showing up in Catalog Manager

My latest battle with PSE11 is trying to access my catalog in PSE11 via the Catalog Manager but it doesn't show up in the list. The catalog is named My Catalog 2 is located at C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog 2. It is the only catalog I use and is the one that opens up when I launch Organizer. But, for the life of me, I can't get it to show up in the Catalog Manager. The only catalog that shows up is the original catalog which is at a different location and was created when I installed PSE11 on my new computer (Thinkpad W530, Windows 8). I've tried the Custom Location option and browsing to the location, but still no dice. This catalog has thousands of pictures and was converted from my previous PSE6 catalog. How do I get the Catalog Manager to find my current active catalog? I need to do a repair to try and fix another problem I'm having.

This all really started with the migration from my ancient Inspiron 8600 Win XP computer to my new Thinkpad W530 Win 8 computer and at the same time upgrading from PSE6 to PSE11. In the process, I had to move all my pictures (1000s upon 1000s of them) to a different drive letter and main folder location than I was using on my old computer, although I kept the same subfolder structure. This led to all the pictures being reported as missing in PSE11. The reconnection function in PSE11 is not very good (IMO) at handling a situation like this. The way it works, it would take forever and a day for it to search and reconnect all those picture files. I think there was a third-party tool that worked on previous versions of PSE that would let you make mass changes to the file locations, but it doesn't work on the later versions of PSE.
Anyway, I started doing some manual reconnecting and came across a weird situation where a few files wouldn't reconnect saying the file already existed in the catalog which didnt make sense. So, I thought maybe an optimize/repair might fix the glitch. This then led me to the Connection Manager problem. I don't know, maybe all the unconnected files might be causing CM not to recognize the catalog which wouldn't make sense (to me).
Since this situation of having files change location is likely to arise again, I had started investigating perhaps putting together some sort custom reconnect function using a sqlite db tool as you mentioned. I was just hoping to get the files reconnected for now and move on to other things. But, things are seldom simple and straight forward anymore.
I did get My Catalog 2 back to my default at least. I manually deleted the TestCatalog folder and when I launched Organizer, it prompted for a new catalog via CM. But, CM of couse didn't list My Catalog 2. So, I manually launched the catalog.pse11db file via file explorer and Organizer then made it my default catalog again.

Problems publishing to Facebook and Flickr

I have been happily publishing collections to Flickr and Facebook since lightroom 3 came out and recently they have both stopped working. I think the problems happened after I changed the structure of some of my keywords.
From memory, I had two keywords "baby" and "baby photos" and wanted to merge them. I selected all photos with keyword "baby photos" and dragged them to the "baby" keyword and then deleted "baby photos" from the keyword list.
Now I get the follwoing problems
Facebook
I get "failed to retrieve item info" error
It seems to always add the first photo on the list to Facebook, despite of the error. And it does it multiple times (multiple copies in Facebook) if I try to publish multiple times...
Flickr
"An internal error has occurred: ?:0: attempt to index field '_dataChanges' (a nil value)" error
Same situation as facebook, first photo is published but not the rest, photos remain in "New Photos to Publish"
I have commented on two individual posts by people who were having similar problems but I thought it may help if I explained that I was having problems with both Flickr and Facebook and how, I think, the error came about.
Should I report this as a bug?
Any ideas for a work around?
Thank you

I have had the same problem the last three days. I have
not found an answer yet
I get "could not get album info from facebook" on any picture I try to upload from the publish button.
I can upload a picture on my hard drive from facebook.
When I try to use the publish button it looks like Lightroom is starting ok.
No idea where the problem lies.

Problems publishing to iweb

I just want to thank everyone who post on here as your advice really does help.
I had problems publishing to iweb and the following suggestions made by you all helped me overcome the difficulties I was having. I am posting this so that others who may be having the same problems as I was may sort their iweb out too!
Obviously not all of these will help everyone and some people may disagree with what I have said but (touch wood) these ALL sorted out my iweb
1. Empty your cache frequently.
2. Do not use web counter/email me buttons
3. rename your photos so that you are not using !@£$%^&*()_
4. keep trying
iBook G4 Mac OS X (10.4.5) http://web.mac.com/gillianward/iWeb/Site/Welcome.html

No, its not strange at all. When you set up a MobileMe account and publish a site from iWeb it publishes to your iDisk, which is your Apple server that host your site.
Your url for an iWeb published site to MobileMe will be http://web.me.com/username/sitename. You don't actually need the sitename if you only have one site, so as OT has said http://web.me.com/username.
No - reggie88.com is not your username, this is a domain name. www.reggie88.com is a domain name also, not a MobileMe username. Have you actually gone to a domain name registrar and registered a domain name? If you want to use a domain name with MobileMe, then you need to go and purchase one first from a domain name registrar.
No - iWeb does not tell you in iWeb that you username is www.reggie.com. The only way that iWeb will have this at the bottom, is if you have logged into your MobileMe account and gone to the Personal Domain name settings section and entered a personal domain into here. Log into your MobileMe account and check whether you have done this - this is the only reason why iWeb will display this.
Next question, do you actually own or have you purchased a domain name - reggie88.com? If you have, then you can use this domain with a MobileMe account, but there are other steps that you need to go through first to link the two.
In the meantime, find your site by entering the url http://web.me.com/username which in your case is probably going to be http://web.me.com/reggie88 and you should get to your site.

Shipment category not copied from deliveries because none exist

Dear Gurus,
Can u please let me know what this 2 errors means:
1) Shipment category not copied from deliveries because none exist
2) Shipping material not copied as means of transport not unique
The above two warning message are getting from Inbound IDOC. its strange, First time I have seen u201C SHIPMENT CATEGORYu201D
Appreciate your supportu2026thanks
Rgds,
Shafiq

Hi Eric, can you please tell me how you resolved the issue. I am having the same problem and i don't know whether the fact that I can't map back to the IDOC that created the SHIPMENT, if it related to this error message or not.

LR5 will not open ANY existing catalog

LR5.4, MacBook Pro, all catalogs on 256 SSD intermal, photos on external drive. Experienced LR user (since beta tester for v1) I am a CC subscriber, but LR is previous buy and under serial number.
New problem: LR will not open any of my 5 catalogs. Will create a new catalog (empty), then will not open it. On program open, choose any catalog from window: after a minute or so, goes to pizza wheel, then quits. No error message, nothing. System Force Quit shows still open, "...not responding."
Actions:
1. Downloaded copy, reinstalled over existing: no change.
2. Use Time Machine to go back 48 hrs (when it was working) and Restore of entire User Library/Application Support/Adobe/Lightroom: no change.
Before I lose an extensive preference file or other setup, I'm wondering if anyone has some help here.

My recommendations:
1. Reset the preference file (I know you don't want to) Follow these instructions. http://www.lightroomforums.net/showthread.php?14226-Resetting-(or-Trashing-)-the-Lightroom -Preferences-file
2. If that doesn't work, I would recommend. Uninstall - fresh download of LR - reinstall.

Aperture 1.5.1 Printing Contacts Problem...not the color issue.

I understand that this product is a work in progress, but a fairly basic feature, Printing contacts of all the images in my project, or printing a selective few, should work as expected.
I do not get the images I have selected at all. Even iPhoto can do that!
If I select three (or any number) images, print them as contacts...fine...the first time only. I then go select another different three images...and guess what it reverts back to the first three images, not the ones I have most recently selected. Select all images...I dont get them all. Whether they have been adjusted or external or anything. That is a fairly useless feature if you ask me. What gives?? The included book is very thin on details.
I called Apple Support and did the folowing: deleted the Aperture preference file at user/library/preferences/com.apple.Aperture.plist, and then also rebuilt the Aperture Library upon relaunch by holding the option and something key(?) as per the Support instructions and no difference. Then got disconnected on the phone Support line and ran out of time screwing around with this issue.
Has anybody else run into this? Any Suggestions? I could care less about the color management problems on this forum at this point...all I want is a contact sheet of the images selected. The color quality is a known to Apple bug...so what. How about a basic feature set working?
Thanks for any input or suggestions in advance.
John Thurston
24" Intel iMac 2.33 GHz w 256MB vRAM Mac OS X (10.4.8) 2GB Ram NVIDIA GeForce 7600 GT

Same problem here !
I get all selected pictures but some of them are printed totally damaged and just selection of picture. It seems that mostly those cropped ( From 44 just 2). Sending such Contact sheet to Publisher - is not an "best "option describing that pictures are O.K. but problem is software... ??. So I used PS - creation of Contact sheet takes a plenty of time compare to Aperture, but later on printed pictures were more acurat compare to Aperture.
I think something happened in upgrade 1.5.1. Before this worked more-less good. Contact sheet is one of most frequent output of the system when selection is going to be offered to publisher. Have you some tip how to fix a problem ?
Thank you

Frustrated - the publisher could not be verified error - help!

I am really frustrated trying to get this to work - here's what I did -
Everything was running fine with 8.2.1. with my iphone - no problems.
I decided to upgrade using the program auto updater. Tried many times but kept getting an error and it stopped the download.
So I thought I'll just uninstall everything and start again. I uninstalled itunes and quicktime. I uninstalled bonjour. All folders are gone. The only thing I left on there was the iPhone configuration utility, so not sure if that makes a difference. I've tried the options they suggest online. But I keep getting the warning, "the publisher cold not be verified do I want to run it" .. and when I hit RUN, nothing happens. I've also tried to take the itunessetup filed and right click, running as administrator. Sill no luck.
What else can I do?
I even went to an oldapps site to download the version that was working but it doesn't load now either. Appreciate any help!

Okay, I finally got it to work. I uninstalled Norton anti-virus protection (which was not turned on anyway). Then windows installed service pack 2 tonight, then I re-downloaded the itunes installer file again. Clicked on it, and the warning came up again and I said to still run the file like I always had. For some reason this time it actually started and it's now installed. Everything appears to be working normally.

Safari 2.04 - Quicktime 7.1.3 - Films, music and pics are not beeing shown

Hy i have finally a new MacBook Pro.
But working with safari is not funny anymore:
Some Pictures, Players, and some movies are not beeing shown,
only the "Quicktime Questionmark" is there.
Does anyoneknow how to change this. Or am i possible to downgrade to an older version of quicktime or safari?
Greets
Eric

Welcome to Apple Discussions
Sometimes it's a flash issue triggering the ???.
Make sure the web content boxes in your Safari Preferences>Security panel are selected. Also, in System Preferences>Quicktime>Advanced>mime settings>misc, make sure the boxes are unchecked.
If the above are OK, try Safari from another user account. Here is guidance from Apple on how to set up the account. You can ignore step 7 in the article.
Also, on the system preference>Accounts panel, click on "log-in" options. There, select "fast user switching". This allows you to go back and forth between user accounts via an icon in your Menu Bar at the top of the computer screen.
Log-on to the new account and start Safari. If images display correctly in the new account, then your problem is specific to your regular user account. Otherwise, similar response means a system-wide problem.
Post back and let me know what you discover.

Problem: Publishing Category not beeing transmitted to Catalogs

Similar Messages

Maybe you are looking for