Problem regarding map updates

I'm trying to download and update my maps for specific states and everytime it finishes downloading it ends and says resume update less than 1mb. I can't completely download any males. It constantly ask to resume download. I've deleted all of them and tried to download again but still the same issue occurs.

Hi, Ryan92. Welcome to the Nokia Support Discussions! Is this for Here Maps? What's your phone model and which connection are you using? Cellular or WiFi? Does this happen to every map that you are trying to download? If you haven't tried the basic troubleshooting steps, I would recommend that you do so. This is for us to further isolate your concern:
1. Toggle between cellular and WiFi connection.
2. Reboot your phone.
3. Make sure that you have the latest version of your maps.
Keep us posted.

Similar Messages

Problem Regarding TABLE updation for Scheduling Agreement

Dear Experts,
We have noticed that whenever we are releasing any Delivery Schedule for a line item against a Scheduling Agreement the table field ABART(Scheduling Agreement Release Type) in table EKET is not getting updated,but the same field or column in TABLE EKEH or EKEK is getting updated.
Please advice what is the problem and how to resolve the same.
Regards,
Soumick

Hi,
The scheduling agreement schedule line is not firmed physically:The fixing indicator (EKET-FIXKZ) is empty for this schedule line.
This can be checked in Transaction ME39 or with Transaction SE16 for table EKET for the corresponding schedule line.
In the MRP group of the corresponding material, it is set that only transferred scheduling agreement schedule lines should be regarded as firmed (Transaction OPPR, firming scheduling agreement, Firm transmSLines [Field XFAT1]).
In this case, only such scheduling agreement schedule lines are firmed which were transferred by message transmission through purchasing to the vendor. (see also the F1 help for the field).
However, the system displays all scheduling agreement schedule lines as fixed in Transaction MD04 within the release period and assigns them with a star ('*'), that is, this applies also scheduling agreement schedule lines with a transmitted quantity of 0.
In contrast to the above, these schedule lines are not displayed as fixed in Transaction MD05 or in the planning with 'Display result'.
Note 354164 explains this system behavior.
For the planning, the transmitted quantity is considered as fixed if this is correspondingly set in the MRP group of the material.
If the transmitted quantity was updated correctly, it should be contained in field AMENG of table EKET.
By using Transaction SE16 for this table and the corresponding schedule line (scheduling agreement number EBELN, item EBELP, schedule line ETENR), you should be able to find out....
transmitted quantity was written to the database and a fixing can be carried out correspondingly in amount of the transmitted quantity or whether no update of the transmitted quantity occurred (see below Notes 82169, 117093, 134356).
Solution
First, the system behaves as intended.
It should be checked whether the function, which is controlled by this indicator, is actually wanted this way (to firm only scheduling agreement schedule lines which actually have been transferred).
In addition, problems can occur in purchasing when the printed quantity is updated (AMENG).This symptom can especially occur after you have upgraded from a release < Release 4.0A to a release > Release 4.0B.
In this regard, see the related Notes 82169, 117093 and 134356.
Regards,
Udaya.

Hi. have a problem regarding the updates in app store.

there's a number 2 notification in updates found in app store. all the other features are working but it seems that there's just a white blank when i touch updates. for a while there's just a loading sign and after the loading icon on top near the wifi sign stopped, it just went white. you can still see the updates at the top and the featured, top charts, genius, etc below. i tried closing and opening the app, didn't work. i've tried turning on and off the wifi, didnt work. i also tried turning on and off the iphone, still didnt work. *note: not jailbroken, haven't put any songs nor ebooks recently, only downloaded some apps in app store. so does this mean that the great apple has virus problems? please help. having some oc tendencies. sorry for the long post

System Preferences > Keyboard > Keyboard Short Cuts
If this happened while creating a Shortcut, click the "Restore Defaults" button in the same pane.

Problems with 5800 and maps update.

Thats my problem. Using last firmware and its for long time being this problem.
Thanks for answer.

Hi viper_01
Nokia Maps Updater application no longer works and you should use OVI Suite on PC now.
Happy to have helped forum in a small way with a Support Ratio = 37.0

RSAU461, problem with activating update rules for cube 0csrv_c01

Hello,
I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
Regards
Radek

hi
As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
Khaja

Problem with Map Loader 3.0.28.0 and 5800XM

Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem) I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
Nokia users - the biggest beta test community of the world!

Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.
Thank you Nokia guys, your were great help by solving this problem .....
By the way, the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful until you waisting your time watching the progress bar to the end.
I wouldn't be suprise if you can install the same map twice so it takes the twice space....
regards, and sorry for my poor english
Nokia users - the biggest beta test community of the world!

I have a problem regarding sales order line item with confimed quanity

Hi Experts,
I have a problem regarding sales order line item with confimed quanity with '0' with delivery block but confirming the sales order quantity once the order is released from credit check.
The situation arises as per the below scenarios.
Scenario - 1 - When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx and the order is set with credit check. Once the order is relased from the credit check. The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
Scenario -2- Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
Maintain the stock for the line item 2 ( 5 Pcs).
Once the order is released from the credit check. Then for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
Can you please help me how to solve this issue.
Looking forward for your reply.
Thanks and Regards,

Hi,
I agree with your point. In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check. Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5, But it should set to Zero quantity. Quatity should not be get confirmed it should be Zero Quantity.
Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok. But we dont want to remove the - Confirmation Block tick mark
Please any one can help me if you have any solution to solve this problem.
Thanks and Regards.

Problem in Product Update

Hi All,
I am facing a problem in product updation.I am using maintain FM to update Product in sap crm 2007. after that I am using COM_PRODUCT_SAVE_API.This API takes a lot of time to update only one set type .When I debug this API ,there is a badi FM (COM_PR_CHBADI_CHANGE_AFTER_UPD )which is used in this API is taking time.I tried to remove this badi by creating Z API to save Product but Product is not updated with new values.Please tell me any solution for the same..
Regards,
Hem

Hi Hem,
I faced this issue with CRM 5.0 couple of years back. We didn't get any solution at that time other than to update the set type tables with direct table updates.
I thought in higher versions this issue would have been resolved, but i guess not. If you find any solution, please do share.
Regards,
Shyamak

Problem Regarding Creation of Compound field

Hi all,
I have a problem regarding creation of a compound source field.
My source field is say for eg. SF1 and SF2
Destination Field is a look up flat field say LF which has 2 display fields D1 and D2
I mapped SF1 to D1 and SF2 to D2
But when i right click at source and select 'Create compound field' for SF1 and SF2, the compound field is not created automatically.
Can anyone give me a hint as to why is this happening?
Regards,
Roshani

Hi Roshani,
Just check for couple of other things, like
1) I hope its not a qualified table and none of those fields are qualified.
2) None of the fields are ther currently in the matching set in the next tab.
3) You didnt map the main filed (look up table filed, which is there as a sub-table name)
4) There are no more display fields for that table.
I hope it should be one of the above issues. please check for them.
Cheers,
Cherry.

Problem in mapping while using Do not Use SOAP Envelope

Hi All,
This is wrt my thread 'Removing and adding SOAP Envelope'
I am currently working on SOAP-XI-Proxy Scenario.
For some un avoiadable reason, I had to use the option 'DO not use SOAP Envelope' .So the SOAP Envelope came withen the payload and in the pipeline, I can see the payload prefixed by '<?xml version="1.0" ?>' .
Now my payload looks like
<?xml version="1.0" ?> ( no more the encoding="utf-8" notation is there)
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
   xmlns:xsd="http://www.w3.org/2001/XMLSchema"    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<Complaint_Request xmlns="urn:******createserviceticket">
<CaseNo>12345</CaseNo>
<CustomerNo>12345</CustomerNo>
</Complaint_Request>
</soapenv:Body>
</soapenv:Envelope>
To accomodate the change, I also changed my request structure as
<Complaint_Request> (My new message Type)
    <Envelope>
     <Body>
       <Complaint_Request> (My previous message Type)
        <caseNo>
        <CustomerNo>
But I am facing problem in mapping the values to the target structure (which is a flat structure),
as the payload doesnot start with ' ns1: ' notation any more . Even XSLT mapping is not working.
When I am pasting the payload in the Testing Mapping Editor, the Source Node are correctly
formed, but all come in RED . But as the root node , ie 'ns0' is not there, the value
from child nodes are not getting mapped to the target fields.
Regards,
Subhendu

Hi Joel,
SAP says, when we use the option 'DO Not Use SOAP Envelope', the payload also contains the SOAP
Envelope. So it is obvious that the payload wont start with 'ns0' notation.
So I am searching for a solution, when we use that option.
Regards,
Subhendu

Hi guys i got problem apple software Update i got masage .The feature you trying use is on a network resource that is unavailable. Click OK to try again,or enter an alternate path to a folder containing the installation package i Tunes.msi' in the box bel

hi guys i got problem apple software Update
i got masage
.The feature you trying use is on a network resource that is unavailable.
Click OK to try again,or enter an alternate path to a folder containing the installation package i Tunes.msi' in the box below
and i cant find anything please help

This forum is for questions about Apple Remote Desktop, Apple's software for managing networked Mac systems, and hence not the best place for your question. I'd suggest asking in the iTunes for Windows forum. You'll need to include more details, including the version of Windows you have, before anyone can do more than guess as to the problem.
Regards.

Problem in the update rule routine in BIW production

hi,
I have encountered a problem in the update rule, the problem is, there is a routine to calculate the age of a person, age is a key figure,
The problem is that the key figure is not being calculated.
we had encountered the same problem in the bw developent, we reinstaled the update rule, and the age was calculated correctly. Where as in production we cannot instal from business cotent, should we transport the perticular update rule once again?
if there is any other solution, please let me know.
Thanks in advance.
regards chetana.

I think retransporting is the only option available to you. You cannot modify anything in your production system.
IF you have a chance to speak with basis people,ask them to open the system status to modifiable for few minutes.
and make necessary changes in production and bring it back to normal (This is not a best practise in all situations).
hope this helps.
Praveen

Problem in mapping remoteobject on server side

Hello all
I am trying to use remoteobjects in Flex and PHP via Zend_AMF. I am having problem in mapping the data object in flex with the one in PHP.
Here's my code....
private function getAuthors(event:Event):void
     serviceRO = new RemoteObject();
     serviceRO.endpoint = "http://localhost/sampleproj/public/";
     serviceRO.destination = "zend";
     serviceRO.source = "MyService";
     serviceRO.addEventListener(FaultEvent.FAULT, faultListener);
     serviceRO.getData.addEventListener(ResultEvent.RESULT, resultListener);
Now, here's the server side directory structure that works for me....
webroot
+ sampleproj
++ public
+++ index.php (index file for the webapp)
+++ MyService.php (this is the service class)
+++ VOAuthor.php (this is the Value Object class)
Since the index file, and the service file and value object are all in same directory, it works.
This is what DOESN'T work....
webroot
+ sampleproj
++ services
+++ MyService.php (this is the service class)
++ vos
+++ VOAuthor.php (this is the Value Object class)
++ public
+++ index.php (index file for the webapp)
The error that I get is:
Channel.Connect.Failed error
Here's little of something that's going on in index.php
<?php
require_once ('C:/webtools/zendframework/zf/library/Zend/Amf/Server.php');
require_once ( realpath(dirname(__FILE__) . '/../services/MyService.php') );
$server = new Zend_Amf_Server();
$server->setClass("MyService"); // adding the class to AMF server
$server->setClassMap("VOAuthor", "VOAuthor"); // mapping the ActionScript VO to PHP VO
echo($server->handle());
?>
My guess is that in ActionScript code I have to do something with RemoteObject's endpoint.
Can anybody please help me out with this?
Thanks and Regards
ShiVik

The problem turned out to be in the php code.
Here's how I changed it
<?php
require_once ('C:/webtools/zendframework/zf/library/Zend/Amf/Server.php');
$server = new Zend_Amf_Server();
// the following methods provide the lazy loading of services and value objects
$server->addDirectory( realpath(dirname(__FILE__) . "/../services/") );
$server->addDirectory( realpath(dirname(__FILE__) . "/../vos/") );
echo($server->handle());
?>
Earlier I wasn't taking into account the change of directories for service and value object files.
Thanks and Regards
ShiVik

Problem in mapping with multiple values

Hi all,
I am facing a problem during mapping. I am explainning the problem with a example.
Suppose i have a source table named Employee which has two columns emp no and account no. I have a target table Emp_account which has also the same columns.
One employee may have more than one accounts. In source table this account nos are stored in account no column in one row corresponding to emp no. The multiple values in account no are separated by comma for one record in source table.
But in the target table Emp_account a single record will be inserted for each employee's separate account. There should not be multiple values separated by comma in account no column of target table.
So if any employee has two accounts this will be stored as one row in source table but in target table it will divided into two different rows for each account.
EMPLOYEE(Source)
emp no account no
10 101, 102
EMP_ACCOUNT(Target)
emp no account no
10 101
10 102
Think I explained the requirement.. How can i made this in OWB mapping editor..Is it possible?...Can any operator perform this task...If any of u know about this plzz give some solution..It's very important ..
Thanks & Regards,
Sumanta Das

Hi,
With reference to your question.
Can any operator perform this task..I don't think any single operator will help you.
I suggest using an intermediate (staging) table by using a PL SQL procedure with output port to store the values of account number provided the number of accounts are limited. Else use an array variable for account of an employee.
In short no simple solution because of the bad source design else the pivot/unpivot operator would have helped you.
Cheers
- Mohammed

Problem in mapping after migration from 3.x to 7.x infosource

HI Experts,
I have a problem while mapping the data source 2lis_03_bf to info cube 0ic_cs01.
we have a flow like this now after migration done.
Datasource->transfer rules->infosource->transformation->info cube
Now we dont require infosource and its respetive transformation, we are going to map directly from data source to info cube.but we have routines available in info cube related transformation.i.e. coming from infosource to info cube .
I would like to create a new transformation directly from Datasource to info cube but all the source fields are not available in target cube. How to map them.do i have to map all the target fields or i have to map according to the transfer rules target fields. what is the funda to make a transformation and mapping the source and target fields.
Could anyone please through some light here..
Thanks much in advance.

sunil kumar wrote:
Hi,
>
> As said above convert transfer rules to transformations (right click on transfer rules -> additional prop -> create transformation)
>
> Then right click on datasource -> Migrate
>
> After doing this, your datasource will be linked to Infocube directly with one transformations automatically.
>
> Regards,
> Sunil
Hi Sunil & Sravan,
THanks for ur quick reply.As you said click on transfer rules and create transformation.As i can see in my system i have a transformation from data source to infosource .i.e. starting with RSDS_ and then another transformation from info source to info cube.i.e. starting with TRCS_ . what i did was created a transformation by right click on info cube and by giving data source name as 2LIS_03_BF .this is a manual transformation i am mapping manually.Is this a correct way? Please tell me how to do it.
as i have to do this immediately.
Thanks in advance

Problem regarding map updates

Similar Messages

Maybe you are looking for