Problem ripping CD's that have "CD Extras" (extra media files, like videos, for

Can anyone figure this out?
I've been having this very annoying problem while ripping CD's onto my Zen Sleek using the Media Explorer. Occationally, it will rip all but the LAST SONG. The progress bar shows 00% completion, but instead of finishing off by transfering the final song to the player, it goes back to the initial screen (showing all but the last song as ripped; all but the last are in fact ripped and on my player).
It MAY be that these discs have CD extras (i.e. extra media files for your PC). Has anyone been having this or any problems with CDs that that have extras?
I have had this identical problem on two machines, both using XP.
Please help if you can!

First thing, I would see if WMP can rip a CD in MP3 format.
That would tell us whether it's a general drive problem, or something specific to itunes.

Similar Messages

My iTunes keeps will not open. It sais that iTunes Library Extras .itdb file is locked on disk or I don't have permission to open it!!??!!

My iTunes keeps will not open. It sais that iTunes Library Extras .itdb file is locked on disk or I don't have permission to open it??

My iTunes keeps will not open. It sais that iTunes Library Extras .itdb file is locked on disk or I don't have permission to open it??

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

IPad and Movies that have iTunes Extras

I don't yet have an iPad to test it out yet.
I have a few movies that I bought from the iTunes Store that came with iTunes Extras (bonus content like found on DVD's)
At the moment that iTunes Extras only work on a Mac, PC or an Apple TV... but will they sync across to the iPad? Am I able to watch the iTunes Extras on an iPad?

Hello Susan Dietz,
Much like calling from one phone to another, you would need a separate Apple ID to contact with FaceTime (just as calling your own phone number would direct you to your own voicemail, rather than ring your phone).
iOS: Using FaceTime
http://support.apple.com/kb/HT4319
Create an Apple ID.
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
Cheers,
Allen

My iTunes will not open. It sais that iTunes Library Extras .itdb file is locked on disk or I don't have permission to open it ??

So I have uninstalled itunes and reinstalled a totally new one. However it keeps throwing the same code " iTunes Library Extras .itdb file is locked on disk or I don't have permission to open it" What can I do? Can anyone please help me?

So I have uninstalled itunes and reinstalled a totally new one. However it keeps throwing the same code " iTunes Library Extras .itdb file is locked on disk or I don't have permission to open it" What can I do? Can anyone please help me?

How can I insert C structures that have character pointers into DBD file

Hello~
I am changing from a file system I made into DBD.
And I had no choice to convert structures that have character point members
to insert them into the DBD file
for examble,
If there is a structure as below
typedef struct
int IndexKey;
int groupID;
char* name;
char* pNum;
char* pAddr;
char* pMemo;
} TsomeRec;
I made a structure to convert as below
typedef struct
int IndexKey;
int groupID;
char name[MAX_NAME_LEN];
char pNum[MAX_NUM_LEN];
char pAddr[MAX_ADDR_LEN];
char pMemo[MAX_MEMO_LEN];
} TsomeRec2;
But, there are too many structures to convert.
So, I am seeking for the most efficient way to insert these structures into DBD files, considering Performance.
Frankly speaking, I'am not proficient.
please describe as specific as possible.
Thank you~

Hi,
Review the documentation section title Using C Structures with DB, in particular the subsection called C Structures with Pointers. It will explain the way to store structures that have pointers.
Regards,
Andrei

Once I have moved my iTunes media file to my new mac, will I have to erase and sync my iPod?

I have successfully managed to move my itunes media file from my windows pc to my new mac and all is well. However, of course it hasnt copied my itunes, its just copied all the stuff in it. So information about the number of times a song has been played or any playlists have not been copied over. Can i get this information? What will happen when I plug in my iPod to sync? Will I have to erase and sync?

Thank you for your prompt response - I did as you said and did a drag and drop into the iTunes window - it imported and got my album art from the net. When I started Itunes with the shift key down I was prompted to choose a library but since I copied over the media folder and not the library folder I was unable to select that so I guess I will have to create a new library and add in all the music, videos, etc. unless I wait for my laptop and export the library or at least that seems to be the case? In short, all my data (iTunes media folder) is on my external drive and can be added to the blank iTunes screen but I can not choose a library folder. Is there anyway around completely making all those playlists again? I am not sure my laptop will survive the shop with data intact and really hate to start over on those.
In an unrelated question - I collect old TV shows from the 1950's. Can I make playlists within the home video folder somehow? In other words like one for Quiz shows, one for comedies, one for police and detective shows, etc. while I am remaking all my playlists for my music if I end up having to go that route?
Once again thank you for helping me out. I am not too Itunes savvy and really appreciate you taking the time to answer.

I have a CD-ROM with file chassis.sys for my PXI-1042 chassis. What do I do with it?

I have a CD-ROM with file chassis.sys that came with the PXI-1042. How is that file used/installed?

Hi,
The "chassis.ini" file contains information which is used to generate a "pxisys.ini" file, which describes a unique combination of PXI chassis and controller. If you are using a National Instruments PXI controller, you will not need to use this "chassis.ini" file, because our Measurement and Automation Explorer (MAX) configuration software already contains the necessary information embedded. Instead, you simply need to setup your configuration in MAX.
KnowledgeBase 1EGB71UI: What Are PXISYS.INI and CHASSIS.INI?
K
nowledgeBase 32TDRRWD: Configuring the PXI System Entry in MAX 3.x
Josh Hernstrom
PXI/VXI Support
National Instruments

The problem relates to settings that have changed

While in Yahoo e-mail I used the ctl key and the scroll wheel to enlarge the font for readability. Now when I bring up Yahoo e-mail the pages are all large font and bold. Sometimes they are so big that not much of anything really shows on the screen. Using the ctl key and scroll wheel will not reduce the font size.

With the page on display, try resetting page zoom as shown in the [[page zoom]] article.

How do i permanently delete some of the shortcuts that have ended up on my preferences like good becomes bad etc

I have some shortcuts on my keyboard settings I have repeatedly tried to get rid of - like good becomes replaced with bad - but they keep returning again. How do I permanently delete these and where?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Since i have updated the osx, my audio and video for Photo Booth had been altered... How to fix this problem????!!!!

please help me! I make YouTube videos and count on PhotoBooth to do so and now it's not working!!! Any solutions??? Am I the only one with this problem???
When I record a video it goes and i will talk and yea... make a video... but then when I play it back the audio is always behind the video!!!! Is there any way to fix this. (By the way i am not super technical so please dumb it down for me:) )

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

I am having trouble with all websites that have the embedded Windows Media Player. If I go to a page with a Webcam that is using Windows Mwdia, the player does not play or even show up. Any ideas?

With all my other browsers, thia is not an issue including Firefox 3.6. For example, this page http://www.liveduvalstreet.com/ will display fine in every browser except Firefox 4. Because of that issue, I reverrted back to 3.6 until I can find a fix. I have tested this page in Chrome, Maxthon 2 and 3, Internet explorer 8 and Firefox 3.6 with no issues at all. This is just an example site. All sites with the embedded player will not work.

Thanks a million! Thatr did the trick. I had an older versiuon of the plug in installed as well.

Photos that have been removed from sync files are stuck on my iPod.

I have a 30g iPod. After loading some photos by syncing files I deleted some photos from the files. This should have removed them from my iPod. Right? However, the pictures still show up in my photo library. Also, they are pixilated. I have tried removing all photos, deleting the cache, and the 5 R's all with no luck removing these bad photos.
Also where is the phone number for the one time phone support. My iPod is about 3 weeks old.
Compaq Presario Windows ME

Welcome to Apple Discussions!
How did you try removing all the photos? Did you access the iPod HD through My Computer and delete everything in the photos folder, or did you uncheck the option in iTunes?
Try both of these (and if you need help with one of them, just let us know).
Also, here is a list of Apple phone numbers...
Apple Phone Numbers
You'd want to call 1-800-APL-CARE if you'd like Apple to help with this (although I tend to think the Discussions are a more convenient way of getting help).
btabz

HT203175 I have 2 episodes of 2 TV programs that have been stuck in processing file for several hours.How do i get the program to finish?

I've been download 2 episodes from the itunes store. They have both in "processing file" mode for hours. The amount of MB of the files are complete but the downloading icon is still going. How do I get these 2 episodes to finish the processing file mode?

Rammses-
Try following the steps in this article, and try to go about restoring your iPod again. See if you can't get it to work...
http://docs.info.apple.com/article.html?artnum=302538
Also, it never hurts to try to put the iPod into disk mode whenever you're going to restore it.
http://docs.info.apple.com/article.html?artnum=93651
Best wishes,
CG

How come my S5 doesn't have all the camera features. Like zoom for an example

I see everyone with alot of different modes on the S5 camera but I have only 3 choices to choose from and no Zoom what so ever

Unlike the S3 and S4 where you could use the volume buttons to zoom in and out, I have found with the S5 you have use two fingers on the screen to zoom in and out. Spread your fingers apart to zoom in and move them together to zoom back out.

Problem ripping CD's that have "CD Extras" (extra media files, like videos, for

Similar Messages

Maybe you are looking for