Problem sending out email on iPhone 3GS

Hi,
I'm having problem sending email on my iPhone 3GS today only. Error "Cannot send Mail: an error occurred while delivering this message." WiFi is off; Turn on all the SMTP to Yahoo and Gmail; I have powered it off and on again, still my email are not sending out.
Help...~

Ya - I am have the same problem. I have 4 accounts that are set-up on my phone. 3 Gmail - I can receive but not send out replies - all settings are matched up with gmail sever information. I have 1 Yahoo account which I can send and receive from no problem. Why??

Similar Messages

I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Problem sending out emails offsite. iPad

Hi fellow apple users,
Could anyone assist?
I have no problem sending out email when using it at office.
But when I go offsite to send out email, i was prompted 'Cannot Send Mail'. A copy has been placed in your outbox. The recipient was rejected by server because it does not allow relaying.
Any good souls out there who can assist?
Thanks a bunch!

Hi al,
Here is a link to a site that explains the whole "relaying" thing. Because there are various reasons you may be getting this message, thought this might be helpful:
http://www.gammadyne.com/relaying_denied.htm
Hope this sheds some light on your issue!
GB

New user of Macbook Pro - Problems sending out emails

Hi, I have just recently bought a macbook pro. I have created my email account. However, when I try to send an email, the message is just stuck in the outbox. What do I do to overcome this problem please?

Hi Ernie,
I found the below information when going to "what are bt yahoo settings". Is this information useful at all?
What are the BT Yahoo! Mail settings?
To use an email program to send and receive BT Yahoo! Mail messages, you must designate a new incoming (POP) mail server and a new outgoing (SMTP) mail server. Outlook Express users can do this automatically by going to My account and clicking on 'Configure my email client settings'.
If your program won't let you add new POP or SMTP servers, you'll need to change your current server settings.
Here are the basic server settings for BT Yahoo! Mail:
Incoming Mail (POP3) Server:
mail.btinternet.com
Port (usually specified in 'Advanced settings')
110
Outgoing Mail (SMTP) Server:
mail.btinternet.com
Port (usually specified in 'Advanced Settings')
25
Account Name/Login Name:
Your email address (including the "@btinternet.com" or "@btopenworld.com" part)
Password:
Your BT Yahoo! password
Please note: if your client does not support SMTP authentication, you will not be able to use it to send your BT Yahoo! Mail messages.

Problems sending Verizon Email With iPhone 4s

I cannot send mail from my iPhone. I keep getting user name or password [email protected] is incorrect. I deleted the account and started over -but it didn't work. I've been having this issure for two days now. Any help is appreciated. I also checked the settings, etc.

I cannot send mail from my iPhone. I keep getting user name or password [email protected] is incorrect. I deleted the account and started over -but it didn't work. I've been having this issure for two days now. Any help is appreciated. I also checked the settings, etc.

HT3529 having problems sending picture messages with iphone 3gs

i cant send a picture message with my iphone 3gs, it worked alright before, i have tried resetting all the settings but still wont work

contact your carrier as they handle MMS.

Problem sending MobileMe email from iPhone

Hello
I have a new iPhone, MacBook and MobileMe subscription. The address from MobileMe when I send email from my Mac is [email protected] but when I send email from my iPhone it is [email protected] I have in theory followed all the instructions yet cannot get it to do otherwise. Any suggestions appreciated
Cheers
Ben

This is because the SMTP server you have configured does not permit connections from off the ISP's network. When you are connecting via EDGE this is off-network from the perspective of the ISP.
Here are some hints from Apple on this problem:
http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2637.html
You didn't say who your ISP is, but here are some common settings ISPs in various countries:
http://docs.info.apple.com/article.html?artnum=306990
As a last resort in the US you can set the outgoing SMTP server to cwmx.com:25 with no user ID or password. This will work on EDGE only, not on WiFi.

Problem sending an email from iphone

When my iphone is connected to my wifi I can send and receive emails no problem, however if I connect via GPRS I can receive email but when I try and send it I get an error message telling me it cannot find the outgoing server, can anyone help with this?

This is because the SMTP server you have configured does not permit connections from off the ISP's network. When you are connecting via EDGE this is off-network from the perspective of the ISP.
Here are some hints from Apple on this problem:
http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2637.html
You didn't say who your ISP is, but here are some common settings ISPs in various countries:
http://docs.info.apple.com/article.html?artnum=306990
As a last resort in the US you can set the outgoing SMTP server to cwmx.com:25 with no user ID or password. This will work on EDGE only, not on WiFi.

I send out emails with proper grammar. People would reply returning my email and I would notice the grammar has changed and doesn't make sense. What's causing this problem?

I send out emails with proper grammar. People would reply returning my email and I would notice the grammar has changed and doesn't make sense. What's causing this problem?

Have you actually compared what you sent (in your Sent Mail Folder) with what is in the reply?
Note that Auto Correction can often change what you think that you are typing.
Are you sure that the return message has your original message intact and not edited by the recipient?
Bottom line: if the recipient does a simple reply to your message with the original message attached the system is not going to edit your message.

ActiveSync Result: Not enough space on server. How can I help resolve this problem? Won't let me send out emails.

I can't seem to send out emails because I keep getting an error when it's trying to Sync by reading" There is not enough space on the server to sychronize info. Deletoe some old items from your exchange mailbox"
I dont have any messages in my folders, and I'm trying to send an email. How come this isn't working? Any way to help solve it would be greatly appreciated, thanks!
Post relates to: Treo 800w (Sprint)

Do you have any items in the delete items? If not check with your IT and see if any changes to the server was made or what could be causing this problem.
Post relates to: Palm Z22

I changed my comcast password (on my iPhone) and now am having trouble sending out emails from my Mac

I changed my comcast password (on my phone) and now am having trouble sending out emails from my Mac.

Did you change the password on your Mac as well? Go to Mail / Preferences / Accounts and change it there too.

Can not send any email from IPhone 5, I get......A copy has been placed in

Can not send any email from IPhone 5, I get......A copy has been placed in
your Outbox. The sender address "jvcrews@" has been rejected
by the server.
<Email Edited by Host>

I have the same problem, but I can send and receive e-mails from my home base. When out of the range of my home I get this message: "
A copy has been placed in your outbox. The sender address: "[email protected]" was rejected by the server."

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

Since upgraded phone to 2.0, cannot send out email

I recently upgraded my iphone to 2.0 (mistake!) and now cannot send out email from my iphone. I have tried deleting all my email accounts and re-setting it up on my iphone rather than syncing with my computer but it still will not send out email. I can send out email from my computer and used the same settings for both...

Also having mixed success sending mail on the iPhone, which is disappointing because I haven't had to send a lot of messages. Out of about 6 attempts, I've had two replies completely disappear. They weren't sent, they weren't in the outbox to send later. They just disappeared. One was while on my home network, the other was while I was traveling. I am very bothered that the emails aren't saved to try and send later.

I am unable to send out emails but am able to receive emails. Plz advise. Thankyou

Why am I unable to send out emails successfully but am able to receive emails. The company I am with is Hawaiian Legacy Hardwoods.
This window keeps popping up:
Sending of password did not succeed. Mail server pop.secureserver.net responded: hawaiianlegacyhardwoods.com not found in the auth database
When I close the above window another window appears:
Login to server pop.secureserver.net failed.
These options then appear:
Login Failed
Retry Enter new Password Cancel
Not sure why this is occurring but is there any direction you can assist with?
Thank you

Is this problem in Thunderbird (stand-alone email software)? Just checking because your post got tagged "Firefox" somewhere during the submission process.
secureserver.net is a GoDaddy server. Are you sure your mail account is hosted with GoDaddy?
Also, server names starting with pop. usually are for incoming mail. You may want to double-check your provider instructions to see whether you need to use a server name starting with smtp (or something else other than pop).
In Thunderbird, there may be a separate Outgoing Mail entry at the bottom left of the Accounting Settings dialog. To access that dialog, you can use either:
* 3-bar button > Options menu > Account Settings
* tap the Alt key > Tools menu > Account Settings

Problem sending out email on iPhone 3GS

Similar Messages

Maybe you are looking for