PROBLEM SOLVED AT ALL!!!

hi i want to help people whose updated your ipod with the 03-23 version!! i have a big problem with my ipod but i did these steps and its really working like it did before, just make these steps!!!
1) download and install HP USB Disk Storage Format Tool
2) make sure iPod Nano is disconnected
3) restart computer
4) after logged back into desktop you'll need to do one of 2 things
a) if you "do not" have iTunes installed then continue on to step 5
b) if you "do" have iTunes installed then you'll need to disable a service that will constantly look for your iPod connection. bring up your task manager by hitting (CTRLALTDLT). find "iPodService.exe & iTunesHelper.exe" and disable them by right clicking on the processes one at a time and clicking "End Process."
5) bring up HP Formatter Tool
6) when format window is up plug iPod Nano using supplied USB cable
7) give both your computer and HP Formatter Tool some time to recognize your iPod Nano
8) now select format type of FAT32
9) click Format (it's better to not do a quick format so stick with default of full format)
10) after pop-up window appears notifying you that format is complete, close HP Formatter Tool
11) bring up iPod Updater 3-23 (download and install from Apple site if haven't yet)
12) do full restore
13) the restore should have automatically updated your software but if it hasn't then run update.
14) everything should be fully operational now. if for some reason your iPod Nano or computer locked up some where in the listed steps then start over with Step 2.
good luck for all in this page who has the sam problem that i had

Wonderful, thank you!! This worked well!
I have a 40 GB older generation iPod that was behaving the in the same way that you described your nano. I followed these instructions and everything seems to be working smoothly, I did run into one glitch that I wanted to mention though, just so no one else gets discouraged if they come across the same thing:
When I reformatted to the FAT32 it took about an hour and at the very end an error message popped up that said "Volume too big" or something to that effect. I clicked "OK" and went on with the steps from there (close formatter tool and open the updater, step 11), and it worked fine. So please don't fret over the error message, it'll be okay!
Also, I did a Google search for the HP USB Disk Storage Format Tool and clicked around on the results until I found one to download.
Thanks again, I really appreciate it!

Similar Messages

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio reaches the one hour point. From there on, the left click will not give me the drop down menu in order to copy and then paste into an Excel sheet I then have to submit for the proofing purposes. After the one hour mark, I can only control/c in order to highlight, then when I slide up to my Excel sheet, I'm able to right click and paste. Why is the program not, all of a su allowing me to left cllick the mouse and have a drop down menu give me the option to "copy, " as it does for any time signature markers up to 1:00:00.000?

Which version of Audition? With the latest version of Audition running on a Windows 7 machine I can't get a dropdown menu at all when I left click on the time in Markers List. The only way to do it is with cntrl-c.

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

My iTunes is not opening it says this version of iTunes has not been correctly localized for this language.Please run the english version, what can i do to solve it, this problem occurs in all user accounts.

My iTunes is not working, it says This version of iTunes has not been correctly localized for this language.Please run the english version. But it is already the english version, and this problem occurs in all the user accounts. What can I do?

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

WiFi connection problem solved

My intel iMac and MBA had no problem but iPods 3g and 5g did. I had an old Netgear router connected and sitting next to my Airport Express. On a hunch I diconnected the Netgear and created a guest network to replace the one on the Netgear. PROBLEM SOLVED!
Evidently our iPods and boarder's iPhone had problems sorting out the signals and finding the right addresses. Moving the AE to a higher and slightly more central position also helped.
Jim

Same here on a Vodafone PocketWiFi 2.
Tried NetworkManager, wicd, wifi-menu but all have the same issue.
I recently installed Aptosid on another machine and it has the same problem... It also has kernel version 3.9.
All the live CDs I've tried work, even an Arch CD from May works, though a current install does not.
I have no problems connecting to another (wpa2 enterprise) network yet can't on this 3G modem.
I'm hoping this isn't a permanent issue and perhaps an update very soon will fix this.
It seems the only way to fix this for now is to use an old version of Linux. I'm currently running a virtual machine only for the purpose of Internet sharing, very annoying.

Mediawiki, mysql, php? problems [SOLVED]

On Sunday my Arch install that is hosted by Slicehost became unresponsive to them so they had to do an emergency reboot. After it came back up my install of mediawiki was (and still is) only returning a blank page (at least in Firefox). After some digging I found out that part of the problem was that mysqld wasn't starting so I managed to get that fixed by commenting out the lines relating to innodb and putting in skip-innodb into my.cnf. But I'm still getting a blank page.
According to Mediawiki's manual, "A blank white page indicates a PHP error which isn't being printed to the screen." They give two lines to put into LocalSettings.php to force error messages but after doing that I'm still getting a blank page. Changing display_errors in php.ini to ON didn't have any effect. When I load the wiki in Safari I get the following error: "Got java.io.EOFException (Server closed connection while sending the HTTP header.): http://some_url.com/mediawiki/index.php/Main_Page". I have no idea what this error means and googling java.io.EOFException doesn't bring up anything very helpful. My PHP Test Page indicates that PHP is up and running.
Any ideas on fixes or where I can find more clues?
[EDIT]
Mysql was definitely the root of the problems with Mediawiki. I tried nearly every suggestion listed in the forums for fixing a mysql install that wouldn't start but nothing worked. I even completely uninstalled mysql and reinstalled it but it still refused to start. I switched over to postgresql and switched mediawiki to run with that. Problem solved.
Last edited by k_odoma (2009-05-23 01:48:35)

There are some other things that must be done to connect to
the database
(such as passing the usernamee, password, and host info to
mysql_connect()
and storing the connection resource), and those might be in
the include
files. I generally place all of the connection parameters in
a separate file
that is located in a folder that can't be accessed by a
browser, for
security purposes.
Paul Swanson
Portland, Oregon, USA
"Amy Blankenship *AdobeCommunityExpert*"
<[email protected]>
wrote in message news:edk6ui$69c$[email protected]..
> What's in the include(s)?
>
> "83Dons" <[email protected]> wrote in
message
> news:edk5s5$4uk$[email protected]..
> > Here is the php code for the 'read' and 'write'
parts:
> >
> >
> >
> > <?php
> > include '......';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $sql = "select A1Answer from authorware where id =
'13'";
> > $result = mysql_query($sql);
> > $answer1 = mysql_result($result,0,"A1Answer");
> > print $answer1;
> > ?>
> >
> > <?php
> > include '............';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $newdata = $_GET['data'];
> > mysql_query("insert into authorware (A1Answer)
values('$newdata')")
or
> > die(mysql_error());
> > mysql_close(); ?>
> >
>
>

Dr.Watson problems solved.

DR.WATSON PROBLEMS SOLVED:
System:
WLS 5.1 with SP11 running on NT4 Using OCI817_8.
Oracle 7.3.4 running on NT4.
Problems:
Dr.Watson exceptions in native code...
# An EXCEPTION_ACCESS_VIOLATION exception has been detected in native code outside
the VM.
# Program counter=0x60239689
When asking BEA and Oracle:
"Use the latest OCI available. It is backward compatible !"
What have been done to solve the problem:
Going through all SQL code (and doing some rewriting), configuring connection
pools (TestOnReserve / TestOnRelease, refresh, etc) and several other configurations...
At last, we tried to change to the OCI version matching the Oracla versions we
were connecting to (from OCI817_8 to OCI734_7).
Voila ! NO MORE DR.WATSON EXCEPTIONS !
Our conclusion:
If possible, use the OCI version that matches the Oracle version you are running
on.

Hi Abhijit
Couple of pointers which could resolve the issue:
1. Since you are using the JDBC-ODBC bridge what occurs internally is that your JDBC API through the Virtual Machine make calls into the ODBC API on your Windows system. So the Watson error that you are getting is probably an illegal access by one of the methods in the ODBC API - this is for the Diagnosis part.
2. The Solution part -
a. Should I change my JDBC-ODBC driver? Not necessarily because the problems could be with the ODBC interface implementation and changing the driver might not help.
b. Should I change my programming style? This is one thing which could really help. The problem with creating connections each time is that it takes a lot of resources to do it, So there is a performance degradation. What you could do inyour code is use a Java Bean to create the required Connection. You can also think of using a prepared statement appropriately encapsulate it since you are invoking a particular query repeatedly. In your JSP page you can retrive(create) this bean through the jsp:useBean tag with the session as the scope attribute. The <jsp:setProperty methods could also be used to set the DSN name and the driver.
Once this bean is successfully created you have an open connection.
Now for the part you have pasted - replace the create connections with getting a new Statement object which would hold your Query. At the end of the JSP just close the Statement object.
Once you are done updating the page you may transfer the control to a different JSP - Let that transfer trigger the connection close in the Java bean.
This should solve the Dr.Watson problem.
Good Luck!
Eshwar Rao
Developer Technical Support
Sun microsystems inc
http://www.sun.com/developers/support

PROBLEM SOLVED--CS5 WIN7 X64 INSTALL ERROR DEPENDENCY FAILURE

PROBLEM SOLVED!!!!!!!!!!!!
I just spent 9 hours straight on this, but will was stronger than "its". Now I have both cs4 and cs5, but hopefully it will work if you just have cs5 as well. I also did not try runnning cs5 installer first after implementing the fix, maybe that will work too..And when getting the cs5 error, I went to re-install cs4 but got an error as well so that is why I took the steps I did. On 7x64 do the followin
First run the cs5 cleanup tool and reboot.
Second, go into c:\program file(x86)\common files\adobe\installers . Delete everything in it
Then go into you registry (start, run, then type regedit) and expand to this registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\ Components ...(if this isnt there, try an install again, then go to the folder that you deleted the files from a moment ago and extract the log from the zip file and open it and go to the end. where it says error 1402 will be followed by a unknown\components\(a bunch of numebers right here)\(more numbers) ...
Copy the numbers directly after the components\ and go back into registry and click edit then "find" paste those numbers into the box and hit find..when you get to the key, scroll ALL the way back up to components again. Right click components and hit permissions.. Go to advanced and then the ownership tab up top.. click edit, hightlight administrator(s), check the box to "replace subcontainers" and click apply. respond yes to everything and close that and hit apply again if asked. then click the add button above the advanced button you just clicked. when the new box appears, click advanced and then click find now. Highlight Administrators and SYSTEM and hit OK. Then give both of them full rights and hit apply. Then click advanced again and in the first window check the box that says "replace all child objects...." and hit apply. accept the prompts and hit okay.
Now go into c:\windows and on the system32 folder, right click and go to properties. Go to the security tab. Click advanced and then "owner" and click edit. highlght administrators and check the box "replace all child object....." again and hit apply....
Now give Administrators, SYSTEM, AND TrustedInstaller full rights by clicking edit above the advanced tab in the first properties box.. Then click advanced again and in the first window click replace all child object....." again and hit apply....
Now do the same for the winsxs folder and (for good measure i did syswow64 but not sure if its necessary)...
Now you should be able to install both versions..(as i said, I installed cs4 first, maybe it was not necessary)...
If you dont like the idea of just blindly giving administrators full rights to all system folders, you can spend MANY MANY hours running the installs over and over and getting the faulty registry value that caused it to fail and create specific permissions for that and then go on to the next value that fails......what a pain
Message was edited by: DarkMatter78

Thank you for this.
I have been trying to install CS5 MC now for weeks. I first got it to install everything except After Effects and Premiere Pro. Then trying to follow all the suggestions on this forum I wound up not being able to install any part of it at all. Now..
Well...following your kind suggestions as much to the letter as I could I have now been able to install everything...except Affter Effects and Premiere Pro. Sigh.
At least I can get back to work on everything that doesn't require AE and PPro. I still need to get them installed and working.

Problem solving expertise appreciated. What does a MacPro do in its initial booting phase?

My MacPro 3.1 (2008) with 20 Gb Ram does no longer want to boot. I checked the harddrive (startup disc), it is OK (my MacBook) boots from it. I checked the ram, it appears to be OK. When I push the power button the fan begins to work, red lights appear shortly on the RAM circuit boards and they go out again but then nothing happens. Monitor does not wake up, there is no start up chime, machine appear unresposive to any keyboard commands.
Anyone can tell what may be wrong, what the cause is why the MacPro does no longer want to boot and what could possibly be done about it?
So some Problem solving expertise and advice is higlhly appreciated. I really like to know what exactly does a MacPro do in its initial booting phase? Information that could bring life b to my well respected grand-old lady.

Conventional wisdom is that you get nowhere until you get the chime.
For that reason, the approved method is to remove everything that could possible be dragging down power and test the absolute minimum configuration, hoping to get the chime. Once it chimes, you slowly build it back up. adding one part at a time until you find something faulty or it "comes clean".
Disconnect AC power and remove:
graphics card
All other PCIe cards
All Hard drives
All Optical drives
All RAM -- then check for the power light blinking
next step is to restore one pair of DIMMs and try for the chime.
Then more DIMMs
Then graphics card, etc.

Problems Installing J4680C all in one

I'm having problems installing the all in one for my j4680c. I'm getting a fatal error message. I'm runningWindows 7 64 bit.
This is the screenshot I took:

Hi @Mezron,
I see that you are experiencing issues installing the printer software. You are getting a fatal error message. Thank you for providing the screen shot of the error message. I will certainly do my best to help you.
Please download and save the latest drivers if you haven't already. HP Officejet Full Feature Software and Driver.
Turn off the Antivirus Software and the Real Time Scanning if your Antivirus Software has this feature. It can affect the full software from being installed.
Here is a example using McAffee Security Center.
Disable Real-Time Scanning and the Firewall:
Open your McAfee product located down by your clock and right click the M.
Click Navigation and select Real-Time Scanning .
Click Turn Off .
Click Navigation and select Firewall .
Click Turn Off .
Return to the main product window and verify that Real-Time Scanning and the Firewall remain off.
Close your McAfee product. The status should show that you are not protected.
Then follow this document to register Windows components, msconfig and reinstall the printer software again.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
If you have any further issues, check this document out for A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Everyones Oracle Linux Problem solved!!!

Everyones Oracle Linux Problem solved!!!
Here's something Linux people should relate to: Use what works!
what works?
NT works! NT works great with 8i AND OAS.
No hassles at all!
Up and running within one day!!!!
Guaranteed!
U don't see a NT forum here with people having ridiculous install problems like Linux people?
Perhaps Oracle should moderate this newsgroup and even give an authorative answer or two?
null

I have switched our development and soon production databases to Linux because it runs like a charm. Fast and efficient, no problems. The installer has been a problem no doubt because Oracle put less of an emphasis on debugging their Linux installer than their idiot-proof NT installer.
By the way, I was able to circumvent installer problems by just linking svrmgrl to svrmgrlO; this avoided the dreaded segmentation fault and kicked everything open just fine.
BTW, about NT; what makes an OS is not how well everything works when everything is going well, but how bad it gets when something goes bad. For instance, the segmentation faults on Linux weren't a problem because I just picked up and continued; on NT you'd have to restart the whole system...not a pleasant feature.
null

BB10 Calendar problem SOLVED!!!

BB10 Calendar problem SOLVED!!!
Step 1: DO NOT do a device switch using BB Link!
Step 2: On your old device, do a device switch using an "SD Card' - this helped me big time since it copied everything!
Step 3: On your BB10 device, insert the old SD card, and complete the device switch using the "SD Card" option.
Step 4: Voila! All your calendar, phone book and personal data is all transferred on to your new BB10.
All the best!

I had a blackberry 9780 (now a Z10) When I go to setup on the old BB the "device switch" icon is not there.
Is there anyway I can get that as an option on the phone so I can try what you suggest

Printer Problem Solved!

I was happily printing valentines for my grandchildren when all of a sudden my Epson Stylus N11 would not go. The printer icon in the dock bobbled and the message said the printer did not recognize the ink cartridges! Very weird. So I turned the printer off and on and then when I tried to print the message said the computer was unable to communicate with the printer. Restarting my iMac did nothing.
That was very alarming. Did this mean the printer was malfunctioning? Would I need to go out and buy a new one?
Then I went to my preferences in my home folder and deleted everything that said printer or Epson. Restarted the computer. Problem solved! The symptoms seemed to indicate a problem with the printer itself, fortunately it was not. I thought this might be useful to share.

Hello Lars,
i agree with you that the v2.00 of the UFR2 driver works. I have been recommending it for a while now in this forum.
However, during my testing I found that it did not always work perfectly on 10.6 and it did not support all the models of Canon iR. So while it is currently working to your iRC4580, it may not be your final solution because it was not designed to work with 10.6 and I just wanted to make others who read your post aware of this.
Also, because the driver does not officially support 10.6, I was suggesting this as an explanation why Canon
Europe had not posted the same.
One final note. For the sake of other readers If the iRC4580 had an imagePASS-H1 print controller attached, rather than using the internal Canon board, then the UFR2 driver cannot be used.
Hope this clears things up. Like I said, I wasn't disagreeing with you. i was just trying to answer some of the items you raised.
Pahu

Outgoing email problem solved

Several people have reported that after they switched to Yosemite, they can still receive emails on Exchange but they can't send emails. The problem may be attempting to send an email with a corrupted address. In Mountain Lion, attempting to send an email on Exchange with a corrupted address would trigger a warning saying the email cannot be sent. On Yosemite, there is no warning. The email with the corrupted address is held in the Outbox and all subsequent outgoing emails queue up behind it. It would save people a lot of time if Apple reestablished the warning. In the meantime, keep an eye on your Outbox.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Mail & Adress Book: issues sending group mail - Problem solved

I started writing this discussion because I could not get something to work. As I wrote it, I made many tests to confirm what I was writing and also read several past discussions on the subject. I ended up solving my problem and decided to share my findings. Hope it is useful to other people.
EMAIL TO A GROUP WITH ALL RECIEPIENTS SHOWING IN THE «TO» HEADER - My problem solved
SENDING FROM THE MAIL APPLICATION:
To start do the following: Mail/Preferences/Composing check «Show members of a group»
Then for a group name with two or more words OR wit a one word group name, start writing the group name in the «TO» header of an email wait until the « () » appears highlithed in a color as you slowly write the Address Book group name and then select the group name from the scroling list appearing below which comes from your Adress Book (whether it's open or not). If you choose in a selection list before the « () » appears as you type, you could end up with an empty list and the group email does not work. When the « () » does not yet appear but the group name does below, it most likely will not work but if you scroll down you may find a second one that will. The whole thing is wear but once you get the hang of it you make it work everytime.
SENDING FROM THE ADDRESS BOOK APPLICATION:
If you try to send the email to a group from the application ADRESS BOOK by pressing «ctrl» & right clicking the name of the group and select «Send an email to GROUP-NAME», it will work also. But the group name must not have a space before its name in the Address Book (one could decide to do this to have a group to appear at the top of a list of groups). The latter was my problem and sending from the address book application did not work.
EMAIL TO A GROUP WITH «UNDISCLOSED RECIPIENTS» SHOWING IN THE «TO» HEADER - My problem solved
First one has to uncheck the «Show members of a group» in Mail/Preferences/Composing
Second strat a new email and proceed as described above in «1.» in the second and third paragraph.
As suggested in one discussion, if you still can not get it to work try closing your Mail and Address Book applications and re-open them.
As suggeted in another discussion by Ernie Stamper on May 15 2009 in the «Can't send an email to a group»:
«In Mail Preferences/Composing, select to Show members of a group, and then compose a message (no need to send for this test) using the group address -- do the 9 addresses show in the message header? If so, then report the name of the provider of the SMTP you are using. It might be that they do not allow the Group in the To -- when working correctly, the recipient sees only Undesignated Recipients in the header.»
I'm using Mac OS X 10.7.5 and Mail 5.3 (1283) on an iMac 2009
Can't send an email to a group.

Hi Priyanka,
I can't get it working. I get this error:
2007/03/25 17:23:00] Error in evaluate <from> expression at line "98". The result is empty for the XPath expression : "ids:getUserProperty('esbMailTo', 'mail', 'jazn.com')".
[2007/03/25 17:23:00] "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.less
- <selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
- <part name="summary">
<summary>
empty variable/expression result.
xpath variable/expression expression "ids:getUserProperty('esbMailTo', 'mail', 'jazn.com')" is empty at line 98, when attempting reading/copying it.
Please make sure the variable/expression result "ids:getUserProperty('esbMailTo', 'mail', 'jazn.com')" is not empty.
</summary>
</part
In users-properties.xml I have this:
<userObject>
     <name>esbMailTo</name>
        <description>MailTo</description>
     <mail>[email protected]</mail>
     <title>Loan Agent 1</title>
     <firstName>James</firstName>
     <lastName>Cooper</lastName>
     <manager>jstein</manager>
        <timeZone>America/Los_Angeles</timeZone>
     <languagePreference>en-US</languagePreference>
     <notificationPreferences>Mail</notificationPreferences>
     </userObject> Any ideas?
Regards Pete

PROBLEM SOLVED AT ALL!!!

Similar Messages

Maybe you are looking for