Problem Syncing Outlook....says outlook sync client encountered problem

I have been syncing outlook calendar and contacts from my PC to my iPhone with no problems. I have version 1.1.2 on my iPhone and 7.5 or whatever the latest is on iTunes software. The syncs were fine until recently and now I cant sync and get an error message that says "outlook sync client encountered problem" What could possibly have happened....I read some posts that say to go back to iTunes 7.3 etc....this has to be a common problem....any suggestions.

Here is an article from the apple support website that might help out.
http://docs.info.apple.com/article.html?artnum=305845

Similar Messages

  • HT1933 i have a sync problem ...whenever i am trying to sync its saying the sync has failed to start...I don't know what to do

    i have a sync problem ...whenever i am trying to sync its saying the sync has failed to start...I don't know what to do

    Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >  http://support.apple.com/kb/HT1808
    However... Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Jessica Sanchez wrote:
    I am installing itunes to a laptop and have not sync device to this lap. ...
    Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue.

  • I restored my ipod and now when I try to sync it says it syncs but it doesn't...what do I do?

    I tried to sync my ipod to itunes but it said i needed to restore my ipod. So I restored my ipod deleting everything on it. I origionally planned to make a cd from my second library of all the songs that i wanted on my first library from the second library, but itunes won't add my songs to my library. I have no idea what's going on!  I have two itunes libraries with all of my music, so I have everything...i just need to get it all onto my ipod.  Now when i go to either one of the libraries and try to sync it says it syncs but it really doesn't. None of my songs transferred to my ipod and I honestly don't know what to do. Help please:(

    Are you following the instructions here. You many not have the correct boxes/music checked.
    iTunes: Syncing media content to iOS devices and iPod
    Also, you can only sync with one iTunes library. However, you can manage music an video among different iTunes libraries/computers.
    Using iPhone, iPad, or iPod with multiple computers

  • I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • No new mail notification in Outlook - CAS Exchange RPC Client Access problem

    Hi, we're facing this problem:
    Users start complaining they suddenly don’t receive new mail notifications in Outlook (2010/2013)  anymore
    Inbox does not show the new mail either
    When the user changes folders in outlook, the new mail does show in the Inbox folder
    Restarting Outlook shows the new mail as well.
    The same new e-mail arrives instantly (with notifications) in Owa and on mobile devices
    Sometimes the new mail notification pops up after a longer period of time (from 30 seconds to 10 minutes). But more often not at all.
    This issue seems to occur at random. We’ve been problem free for a week, and sometimes it comes back three times a day.
    Clients running Outlook 2010, 2013 cached or online, on site and off site. So it seems server related, not client.
    It was seen first around January 8th. We did not make any changes around that time that we can link to this problem.
    Only one CAS server (EXCH1-RTD) shows this issue. CAS servers on other sites are ok
    EXCH1-RTD has CAS and HUB transport roles. The same site has two mailbox only servers. EXCH2-RTD (mailbox server for normal mailboxes). And EXCH3-RTD (mailbox server for archive mailboxes)
    No entries in the event logs that seems to be related
    As the problem only occurs with Outlook clients, I suspected RPC issues. We cannot gracefully stop the “Microsoft Exchange RPC Client Access” service on EXCH1-RTD  while the issue occurs. We
    can only kill the process and restart the service, solving the issue instantly.
    What we’ve tried until now:
    Updated all Exchange servers from Exchange 2010 SP3 RU6 to RU8-v2 (server OS=W2K8R2)
    Updated all Exchange servers  to latest critical Windows updates
    Recalculated requirements using MS Sizing tool.  Upgraded EXCH1-RTD  VM from 8GB and 2 vCPU (1 core/cpu) to 16GB
    and 4vCPU (1 core/cpu)
    Ran various perfmon counters and compared them with other Exchange servers, not finding any obvious anomalies.
    Any ideas would be greatly appreciated!
    Ron

    Hi Ron,
    From your description, OWA works well, the issue is related to Outlook side. In your case, I recommend you use Outlook safe mode to determine whether the issue is related to add-ins. If the issue persists, you can create a new profile to check the result.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Trying to sync iPad saying already synced to different library on computer

    trying to sync ipad
    saying it already synced to different library on my computer
    how ??
    what do i do??? to change libraries

    Hi,
    Thanks for your reply.
    I am an Hardcore fan of Apple productios for their leadership in innovation.
    I was using iTouch previously which doesnt use to behave in this way.
    Having a single all the time with the user is very difficult and not parcticale. I am very much suprised if it was really designed in that way.
    I used several smartphones and none of the smartphone has this kind of problems.
    I am not sure if I had put the question correctly so for your reference, I am inserting an image. Please refer to it.

  • I can not print a PDF from a HP Photosmart Plus B210A.  HP says its is a Adobe problem and Adoble says it is not there problem

    I am unable to print a PDF file from a HP Photosmart Plus B210a.  I contacted HP and they say because the printer does print word docs etc. the printer cannot be the cause of the problem.  This is from the Top Level Support team.  When contacting Adobe, they say that not being able to print their PDF files is not there problem but HP's.
    Another call to HP and they now say it is Apple's problem.
    I am in the middle and still can't print a PDF file.  When trying to do so, it doesn't print and I receive no error messages.  Just nothing.  My serial number is
    W88110PFZE3 and my operating system is OSX 10.6.8.
    Does anyone have a suggestion, or do I just throw out HP?
    Thanks, Bob L.

    Try opening the PDF in Preview and see if it will print out of it.

  • HT1386 Please help. When I try to sync it says "will sync when Kellie-PC is available." Thats the name of my old router/network. How can I get my iphone/ipad to sync under new router/netwo name?

    When I try to sync with iTunes it says when Kellie-PC is available it will sync but thats the name of my old network/router. I would like to know how to sync with the new network/router name.

    go to settings/wifi then in choose a network tap other and type in the name of your network and then the password

  • When i try to update my itunes to 10.6 or whichever it is. why does it say that it has encountered problems before i can even start the update. it just says i have to try to install again but it does the same thing so i cant download the new itunes

    i need help and i have the new itunes thing ready to be installed but it just doesn't install. it says that it encounters problems so it stops. what can i do?'

    You'll need to contact iTunes support then as it says.
    http://www.apple.com/support/itunes/contact/
    B-rock

  • On my ipod 4th gen when i plug it in to my mac and i sync it says it syncs. i was trying to put videos and apps on through itunes on my mac and after its done syncing there is no diffrence none of the apps and videos i synced are there. thankyou

    and on my ipod 4th gen when i go on to the app store it says there is a new upgraded app store the ipod only gives you the option to click upgrade but when you click upgrade it just goes white
    thanks again

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • My new macbook pro (Mountain Lion) will not log into my 1and1 server to connect to my e mail. My snow leopard macbook does not have this problem - Apple support say it is a 1and1 problem! do I have to wait for an update of Mountain Lion?

    My new macbook pro (Mountain Lion 10.8.1) will not log into my 1and1 outgoing mail server. ( It will receive mail - but does not send)My old Snow Leopard macbook does not have the same problem ( server settings etc. are identical) . Apple Support say its a 1and1 problem , 1and1 say it is an operating System prob - I have tried changing port numbers.

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • ITunes does not sync contacts with outlook

    Hi,
    After upgrading from office 2003 to 2013 no contact is being synced with my iPhone over iTunes (I'm using Windows-7).
    When selecting "sync" it says that syncing is in progress and it takes a while to complete the syncing but no contact is being synced with outlook contacts.
    Uninstalling and reintalling of iTunes didn't help.
    Thanks

    iDevices can only be synced via iCloud or to a supported application on the computer via iTunes, but not both.  Turn off syncing via iCloud to enable the option in iTunes on the computer.

  • Is there any way to sync Outlook for Mac with iPhone? I have tried everything but not successful. Apple says it is not possible to sync contacts from Outlook for Mac to iPhone 5. Any help will be much appreciated.

    Is there any way to Sync contacts from Outlook for Mac to iPhone 5? Apple support says that only iTune can only sync contacts from "Contact" which is the default contact of Mac. If one is running Outllok on a Mac machine then it is not possible to sync the contacts with iPhone. It is strange that Apple distributors are promoting and offering machines with promise that Windows users can now run MS Office on Mac machines without any problem. While this is true, it is so strange that one cannot sync the contacts from MacBook Pro to iPhone5. If someone has found a way to sync contacts from Outlook to iPhone 5 please help as it is very frustrating to not be able to sync the contacts. Thanks, Amit.

    SEARCH!!!
    http://lmgtfy.com/?q=sync+outlook+mac+to+iphone

  • Contact Sync problem - Syncing contacts TO Outlook 2013 stopped working, whilst syncing contact FROM Outlook 2013 to iPhone still works.

    I've tried everything...
    iPhone version: 5S with latest OS (v.8.1).
    Outlook version 2013, on Windows 7, latest iTunes version (12.x)
    I prefer NOT to use iCloud (as the representation of iCloud contacts in Outlook ignores the contacts' folder division, which is important to me).
    I have an Exchange server, though the sync is directed to my local Outlook client.
    All other settings looks good (again, syncing FROM Outlook TO iPhone works, but I need vice versa).
    I've tried syncing with closed Outlook client. Tried resetting configuration, tried moving to iCloud and back etc.. All, just to see the problem persist. Newly created contacts on the PC get synced to the iPhone, while newly created contacts ON the iPhone, does not get synced to Outlook.
    Please HELP.

    I have the same problem, when I sync the contacts they pass well from outlook to my iphone, but not the way around, indeed it changes my iphone contacts information and dismisses all the inputs that I already made in the iphone.

  • Problem to sync calendar with Outlook 2002.

    Hello,
    I am encountering the frustrating experience not being able to sync my *Outlook 2002 calendar* with my Iphone.
    The weird thing is that the first time the sync went well, but when I add appointments in my calendar, they are not synchronised with iPhone.
    I have iTunes version 7.4.3.1 and iPhone 1.1.1.
    I can choose Outlook in the "Info" tab in iTunes. It says it syncs, but nothing changes in my iPhone calendar.
    I tried the solution proposed by neilrabin, but it didn't change anything.
    Can somebody help me out ?
    Thanks !

    Outlook 2002 is not officially supported by Apple for iPhone syncing.
    Only 2003 SP2 and 2007.
    There are threads here with workarounds if you search. No promise they will work for you, however.

Maybe you are looking for

  • Sharing a photo or photo page on Facebook

    Is there a way in iWeb to have a "Share on Facebook" button on a photo page (or better yet, an individual photo)?

  • After iPhoto update some photos go black when trying to edit them and am unable to edit those photos

    After iPhoto update some photos go black when trying to edit them and am unable to edit those photos. How do I fix this as this is the latest update?

  • Automated Material Variant Creation

    Is there an automated way to create material variants once a configuration is entered on a sales order, if one does not already exist? Take an example, I have configurable material ComputerA which is a laptop computer. Say there are two possible conf

  • [svn] 2844: FXG Bug Fix

    Revision: 2844 Author: [email protected] Date: 2008-08-14 11:16:44 -0700 (Thu, 14 Aug 2008) Log Message: FXG Bug Fix SDK-16467 NPE from BitmapGraphic.updateDisplayList if repeat=false but source is not yet defined Added null check for source in updat

  • Working with XDCam Footage in Shake. Is it Possible?

    Hey Guys, From what I've been able to dig up, Shake doesn't like rendering out to XDCam in File-Out nodes and it's been the same case for me. XDCam renders brought in to FCS are slow to load and constantly bring up the beach-ball. Is it the same case