Problem to auto-center VI

Hi, I'm running a keypad program in Labview 5.0. When I click the white arrow, the top bar and the scroll bars disappear to leave me only with the keypad. This works perfectly, except that the keypad is not centered in the middle of the screen. I have selected the auto-center option in the VI setup menu, but it doesn't seem to work. I have to manually place the keypad with the scroll bars and then click the white arrow and hope that it is going to be centered. The problem is that this is used with a small touchscreen and this isn't easy to do fine adjustments.
Am I doing something wrong or is there an easy way to solve my problem without using programmation?
Thanks.

I don't remember ever seeing a problem with the auto-center option. You could post the VI. I can't run it in LabVIEW 5 though, since I haven't had that installed since about 10 years ago. The best I could do was to see if the problem exists in a later version of LabVIEW.

Similar Messages

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help.

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

Crm- Contracts problem with profit center!

HI All, I am facing a problem in profit center posting, when billing a contract (VF01, VF44) and MIGO
Contract Scenario,
I am Creating Contract In CRM and replicating it as a contract in ECC to performe Billing(VF01) and Revenue recog(Vf44) the contract created is replicating to ECC with Internal order as a real account assignment object on the contract , when we are billing / revenue recog the dummy profit center is getting populated inthe accounting entries , the senario is explained as below
I have replicated contract with 4 line items, with different profit centers (Say P1, P2, P3, P4 and assigned to same real internal order(IO1),as i am using single object controlling and controlling senario at the transaction level) to all the line items ,when ever the line item is Billed(Vf01) or the Revenue recognized on the Contract(Vf44) the Accounting Entries are getting populated with Dummy profit center as the AUFNR u2013 prctr is u201CDummyu201D
I there a way we change the profit center on the accounting document on billing and revenue recognition
Goods receipt:
I am Creating Contract In CRM and line item in the contract which is backlined with the princial will generate a PR in ECC with Account assignment cat "F" When ever a Po with u201CFu201D account assignment is created and GR is done on the Same , Dummy profit center is getting populated in the Accounting entries
I there a way we change the profit center on the accounting documents (derive the profit center from the Cost center _ prctr rather than the AUFNRu2013 PRCTR) and even though the Internal order is assigned to the line item
We are not using the Document Splitting Functionality, I am aware that when ever there is real cost object assignment, profit center will be populated from the cost object only
I require your help very badly , Please guide me .
Thanks

Hi,
Did you try using substitution rules for CRm processes ?

Problems in game center

problems in game center
i have played calsh of clan ago.
someone has logged on my account. I have changed the password but failed.
i need you to help me

Hello trankiemhung,
Thanks for using Apple Support Communities.
I found the following information that will help resolve your issue:
Using Game Center
http://support.apple.com/kb/HT4314
Additional Information
If you are having difficulty logging in to Game Center or staying connected
Verify that you are connected to the Internet.
If you are unable to create or sign in to your Game Center account from within a game, try creating or signing in to your account using the Game Center app.
Try signing out of your Game Center account, then sign back in. If you can't sign in to your Game Center account with an Apple ID, try resetting your password or using another email address. To manage your Apple ID account, go to My Apple ID.
When using a Wi-Fi connection, verify that your Wi-Fi router is configured for Game Center.
Take care,
Alex H.

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

New EPG download problem in Media Center

I'm currently experiencing problems downloading the EPG guide in Windows 7 Media Center and Vista Media Center. Over the last 2-3 weeks, the guide download has stopped working on all of my computers in Vista and 7.
The error code is 34 and this is caused when Media Center cannot establish an connection to the internet.
I have to connect to the internet via a proxy server/webcache. I have contacted the network support people and they took network activity captures and
identified a problem with Media Center not respecting the proxy/webcache settings in Internet Explorer and hence it cannot download the guide.
Previously, this process has worked perfectly on the network and I am told no changes have been around the time the problem started.
This only occurs on a wired network. For the same computer connected via wireless on the same proxy/webcache, the guide sucessfully downloaded and Media
Center respected the proxy settings. There are multiple machines exhibiting this behaviour.
Is anyone aware of any changes Microsoft has made to the guide download process over in the last month or so which may have resulted in this sort of
behaviour as this appears to be a bug in Media Center.
Thanks
elyoh

My Windows 7 Media Center was unable to download electronic program guides for about a month and a half. I search all the websites and tried all the fixes to no avail. I have an always on internet connection. Tested my connection within
Media Center. I tried to reconfigure my TV. I tried alternate zip codes within my area. Nothing worked. First, I found that I had NRMBMCHandler.dll (9KB) missing from my ehome directory. (C:/Windows/ehome/NRMBMCHandler.dll).
I replaced the file using a copy from another computer.
Then I found on the Microsoft Developers website instructions on Recovering a Corrupted Guide Data Store.
1. Close Windows Media Center
2. Open Task Scheduler (Control Panel>Administrative Tools>Schedule Tasks)
3. In the console tree under Task Scheduler (Local), expand Task Scheduler Library>Microsoft>Windows>Media Center.
4. In the console window under Name, right click ObjectStoreRecoveryTask, and then click Run.
After that action is complete, open Windows Media Center. A message pops up telling you that the system has repaired guide listings and the listings will be downloaded. Check your recording schedule as the repair may have interfered with scheduled
recording.
After that, problem with EPG was corrected. No reinstall was necessary. Hope this helps others.

Problem on Profit Center Group Heirarchy

Hi,
I have a problem regarding profit center group heirarchy. The situation is like this: I have the highest parent node which is the Group Name then its first child in the tree is the persons responsible then next is the companies under him/her and then the projects under the companies.. Now i have a program that generates income stmt depending on how the user filters it's data from FAGLFLEXA table using profit center field.. the filtering shud be like this:
Select-options: Group Name,
                       Person Responsible,
                       Companies,
                       Projects.
my problem is i dont know where i cud get the all those fields. I wonder if anyone cud help. THnx.
And also i want to filter the data selected by the user in select-options like for example if the user chooses
Group name, the next select-options which is person responsible shud depend on the Group name selected and that follows with the next select-options. Thnx in advance

>
Michael Sullano wrote:
> Not just read it.. I want to put it as filters for my report.. i want to use it in select-options as what i've said in my problem.. is there anyway i could do it? Thnx in advance
Ok, I understand from this that you can read the hierarchies and get your data. Once you've got your data then you can validate the user input against it. I'd try bypassing the normal SAP search helps and use my own pop-up screens called from buttons on the selection screen to display the filtered data and allow the user to select what they wanted at each level.
For example.
Button 1 would allow them to search and select Level 1 (top node) values.
Button 2 would call a pop-up screen which would display and allow them to select Level 2 (next node down) values that relate to the Level 1 values already selected.
Button 3 would call a pop-up screen which would display and allow them to select Level 3 values that relate to the Level 2 values selected.
And so on...

URGENT NEED: Using Photoshop CC, is there a way to auto-center linked layers to a specific area on data merge?

I'm looking for a way to auto-center a group of linked layers to a specific area after being data-merged in Photoshop CC. The text needs to be all left-justified within the area in question, so I'm looking for a way that once the merged data comes in, the layers automatically center themselves within the area.

Yes. For example do a select all or make a selection of the area. Target the layer you want to align to that and use menu Layer>Align Layers to Selection>Location...
Use this menu twice to align the layer(s) to one of the nine positions og a tick tack toe board are of the selection.
Example center layer over center of the canvas
Select All
target top layer
Layer>Align Layers to Selection>Vertical center...
Layer>Align Layers to Selection>Horizontal center...
If you select a group of layers that are linked I would expect the group's layers center would be over the center of the canvas. However I have not mad that test it would be easy to test try it. You may even only need to select the layer you want over the center all the linked layers should move with the one being aligned.
But I do not know what you mean by a data merge. Do you mean merge down or merge layers.

Problems accessing control center

After coloning the repository user from production back to development I have some problems getting control center to work again. At first I strugled getting start_service to work, however i got doing the following after a reastart:
DVP_RT_RES_OWNER@dvu SQL> @/oracle/product/10.2.0/owb/owb/rtp/sql/start_service.sql
Available
PL/SQL-prosedyren ble fullført.
However it still does not work, and show_service give me:
DVP_RT_RES_OWNER@dvu SQL> @/oracle/product/10.2.0/owb/owb/rtp/sql/show_service.sql
Not Available
PL/SQL-prosedyren ble fullført.
Any sugestions?

DVP_RT_RES_OWNER@dvu SQL> @/oracle/product/10.2.0/owb/owb/rtp/sql/service_doctor.sql
There are errors in one or more PL/SQL packages and functionsPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availableService script is accessible to the database server
Connection information stored within the repository is correct
PL/SQL-prosedyren ble fullført.

Problems with webcam center

Hi
I bought webcam instant yesterday,i downloaded the newest drivers for it...
But it doesn't work.
Everytime i start webcam center the camera turns off...
I tried it with msn messenger...but it worked perfectly...
HELP!!!!

...the version is .0.02.0729
just try google.....
but i'm still searching for the solution of the problem with webcam center!!!!

Problem in Auto import & syndication.

Hi All,
I am facing an unusual problem in auto import & syndication.
The problem is all of a sudden the import & syndication process stops
without making any changes.
Has anybody faced the same problem & any inputs to overcome.
Regards,
Pramopd

Hi Pramod,
The problem is all of a sudden the import & syndication process stops
without making any changes.
Can you explain your problem a little more in detail
Automatic importing and syndication stops suddenly means is it that after importing or syndicating a file once it does no work again?
If this is your problem then check for the following things:
- After automatic importing of a source file once .MDM places the file automatically in the archive folder.If you wish to reimport the same file it may not work again if in your import map import actio is just create.As once you have imported the fiel based on the primary key in teh matching tab the rec has alredy been imported in MDM so next time this rec will not com eunder th create import action but Update all mapped field option.So if you wish to reimport teh smae rec then change your import action acc or else jsut cahnge th primary field value in the xml and a new rec will be imported.
- As for Syndication,if you have syndicated a file once out of mdm and the suppress unchanged records property is enabled in syndicator then the same records will not be syndicated again untill any field value for those rec change.You will have to disable taht property again if you wnat to resyndicate the same rec or else make any changes in the rec to resesnd it.
- If your issuse is something else and is not solved by this then try checking th import and syndication services on your machin.Go to services.msc and check to see that the import and syndication server is started if not restart it.
- Also check the config file ie mdis.ini and mdss.ini for the valid entries .The delay time for scanning a port.Also check if any exception have occured in the exception folders.
Hope It Helped,
Thanks & Regards
Simona Pinto

Mail has problem with auto address.

My mail recently has had a problem with auto addressing. Sometimes it fills in the address, at other times it will not. I have checked mail preferences often...making sure auto-address is on. I CAN use the address book to click on an address when auto addressing doesn't work. Mail is also quirky about quitting and sometimes preferences have to be re-edited to send. Basically, it is behaving badly. What to do? Thanks ACE

My mail recently has had a problem with auto
addressing. Sometimes it fills in the address, at
other times it will not. I have checked mail
preferences often...making sure auto-address is on. I
CAN use the address book to click on an address when
auto addressing doesn't work. Mail is also quirky
about quitting and sometimes preferences have to be
re-edited to send. Basically, it is behaving badly.
What to do? Thanks ACE
Later...12/03. Autofill not working with mail or safari. Autofill icon, when touched says something like...autofill has no infomation. this is weird, since it had been working nicely for 2.5 years. I've tried everything I could think of. Need a pro's help...MNICE

Problem with AUTO PUBLISH nd update NEW POLICY to Client .

To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947

Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs. What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc. This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system. This happens whether I trying to Play a disc or burn the disc to the hard drive. The drives work great though as they do play DATA discs all the way through. MP3 discs play fine. It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything. Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help. Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

Hi,
All dimms work individually? Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive? I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk? Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
You have some options to consider once you can stablize your PC for updating the BIOS.
Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
Try a bootable BIOS update process as suggested at this site. -- less safe but doable
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Problem to auto-center VI

Similar Messages

Maybe you are looking for