Problem to deploy website via ftp

I use FileZila and tried also CuteFtp to upload my website.
The problem is - always Failed to retrieve directory azure website.
the log :
Status: Resolving address of waws-prod-db3-009.ftp.azurewebsites.windows.net
Status: Connecting to ...........
Error: Connection timed out
Error: Could not connect to server
Status: Waiting to retry...
Status: Resolving address of waws-prod-db3-009.ftp.azurewebsites.windows.net
Status: Connecting to ..........
Status: Connection established, waiting for welcome message...
Response: ‎‪220 Microsoft FTP Service
Command: ‎‪AUTH TLS
Response: ‎‪234 AUTH command ok. Expecting TLS Negotiation.
Status: Initializing TLS...
Status: Verifying certificate...
Status: TLS connection established.
Command: ‎‪USER aloni\alonisoft_web
Response: ‎‪331 Password required
Command: ‎‪PASS **********
Response: ‎‪230 User logged in.
Command: ‎‪SYST
Response: ‎‪215 Windows_NT
Command: ‎‪FEAT
Response: ‎‪211-Extended features supported:
Response: ‎‪ LANG EN*
Response: ‎‪ UTF8
Response: ‎‪ AUTH TLS;TLS-C;SSL;TLS-P;
Response: ‎‪ PBSZ
Response: ‎‪ PROT C;P;
Response: ‎‪ CCC
Response: ‎‪ HOST
Response: ‎‪ SIZE
Response: ‎‪ MDTM
Response: ‎‪ REST STREAM
Response: ‎‪211 END
Command: ‎‪OPTS UTF8 ON
Response: ‎‪200 OPTS UTF8 command successful - UTF8 encoding now ON.
Command: ‎‪PBSZ 0
Response: ‎‪200 PBSZ command successful.
Command: ‎‪PROT P
Response: ‎‪200 PROT command successful.
Status: Connected
Status: Retrieving directory listing...
Command: ‎‪PWD
Response: ‎‪257 "/" is current directory.
Command: ‎‪TYPE I
Response: ‎‪200 Type set to I.
Command: ‎‪PASV
Response: ‎‪227 Entering Passive Mode (137,135,136,19,39,154).
Command: ‎‪LIST
Response: ‎‪150 Opening BINARY mode data connection.
Error: Connection timed out
Error: Failed to retrieve directory listing 

hi sir,
It seems that this is a timeout issue. Firstly, I suggest you could follow this blog to ensure your each steps are right.
Secondly, I suggest you could try to enable this settings:
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • IWeb not publishing website via FTP after adding music

    Hi all,
    When I drag a piece of music on my iWeb website and try to publish via FTP, I get the "there was an error communicating with FTP server" message. Any ideas? Yes this is my own copyrighted music, not other people's music.

    Try publishing to a local folder and launch the site in your browser by double clicking the index.html file.
    This will tell you if the problem is in iWeb or publishing. See...
    http://www.iwebformusicians.com/WebMusic/iWebTips.html
    You could also have a look at some better ways to play your music....
    http://www.iwebformusicians.com/MusicPlayers/Players.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Problems uploading big files via FTP and downloading files

    I've been having problems uploading big files like video files (.mov 12MB) via FTP to my website (small files like .html or .doc I can upload but it takes longer than usual). I'm using Fetch 4.0.3. as FTP. Same problems when downloading files via Bit Torrent. I recently moved to Spain, since then I seem to have the problem. But my roommate with a PC doesn't have that problem. Connecting to internet with Ethernet cable also didn't resolve the problem. I also tested it from a Starbucks coffee connecting to Internet from there but still couldn't upload that 12MB file to the FTP. The security settings for firewall are set to "allow all incoming connections". I didn't change any of my settings so I don't know what the problems could be. I have a MacBook Pro, Mac OS X (10.5.7) Any suggestions? Thanks!

    Welcome to Apple Discussions!
    Much of what is available on Bittorrent is not legal, beta, or improperly labelled versions. If you want public domain software, see my FAQ*:
    http://www.macmaps.com/macosxnative.html#NATIVE
    for search engines of legitimate public domain sites.
    http://www.rbrowser.com/ has a light mode that supports binary without SSH security.
    http://rsug.itd.umich.edu/software/fugu/ has ssh secure FTP.
    Both I find are quick and a lot more reliable than Fetch. I know Fetch used to be the staple FTP program, but it grew too big for my use.
    - * Links to my pages may give me compensation.

  • Problem on upload file via ftp..

    Hi afternnon,
    Can have people tell me.....what is "Can't open data connection" on my upload file via ftp ????how to solve it??
    regards,
    mike

    nbelford wrote:
    I cant find any way to upload the CSR either/ I dont think it exists yet. Can someone please let us know how far away it is. Same applies to the provisioning profile. I cant see any evidence of this yet either.
    I am presuming that without these key pieces of the puzzle one cannot deploy to the iPhone. Can someone from Apple confirm (or correct me)
    I've emailed Apple asking for clarification but I haven't heard back yet. I imagine we'll all learn what's going on at about the same time. And yes, until you get a certificate you cannot upload your apps to the iPhone (within the SDK rules).
    Randy

  • Problem downloading a PDF via FTP.

    I'm trying to send a PDF file via FTP, that I obtained with FM 'CONVERT_OTFSPOOLJOB_2_PDF'.
    After closing the FTP connection, i try to open the PDF file, and I get an error message, saying that the file is damaged.
    Any ideas? Do I have to make any conversion?
    <promise removed by moderator>
    DATA: it_pdf TYPE TABLE OF tline WITH HEADER LINE.
    CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid   = p_spool
      IMPORTING
        pdf_bytecount = lv_byte
      TABLES
        pdf           = it_pdf.
    *--  Connection to FTP (not shown here)
    *-- Transfer table
    CALL FUNCTION 'FTP_R3_TO_SERVER'
      EXPORTING
        handle         = w_hdl
        fname          = p_dest          "file path of destination system
        blob_length    = lv_byte
    *      character_mode = ' '
      TABLES
        blob           = it_pdf
    *      text           = lt_value
      EXCEPTIONS
        tcpip_error    = 1.
    Thanks in advance,
    Maxi.-
    Edited by: maxikishi on Feb 10, 2011 8:22 PM
    Edited by: Thomas Zloch on Feb 11, 2011 4:41 PM

    Don't offer rewards for assistance; you'll receive help with or without the offer.  This topic is an FAQ; FTP is no different than any other transfer method.  Search the forum for PDF conversion code.  Also, the function you're using has a 99 page limit for conversion; you may want to view the function parameters and account for that.

  • Issues Publishing Website via FTP

    Hi guys...
    Firstly I'd like to mention that I'm a real noob when it comes to this so please bear with me.
    Basically, I created a website on iWeb for my radio show but when I publish it, it all seems fine but when i go to the actual URL it doesn't show the page, just the Web Company's page displaying the message:
    "This Domain name is registered and parked with Crazy Domains". ..
    I input the correct ftp details and username/password, and I even tried uploading it with FileZilla to no luck... Is there something I'm missing?
    Any help would be greatly appreciated...
    Thanks!
    PS, I should mention that I own the domain name and have bought the web hosting as well via Crazy Domains, not Mobile Me

    You need to forward your domain name to the IP address of your hosting account. As you have registered your domain name with your hosting service their tech support should help you with this or, at least, point you in the right direction.
    When I start a new site, I register the domain name through my hosting company, Host Excellence, create a new root folder in my account and then hook them up with a couple of mouse clicks in the control panel.

  • Big problems when deploying cs6 via Jamf Casper

    Hi Everyone, Has anyone else come accross a similare issue?
    I manage casper for a large organisation and we are trying to roll out cs6 to the mac users.
    There are 3 flavours of cs6 being pushed out Design &Web Premium, Master collection and photoshop extended.  All macs are on 10.6.8 and a small handfull are on Lion. All macs have at least the cs5.5 version of this product installed, some also still have the cs4 version ( kept for backwards compatible work)
    I prepared the packages with AEMEE and uploaded both the install and uninstall for each flavour.
    When deploying design and web premium I have no issues it runs smooth and installs every time. I do this via a policy using the every15 trigger.
    When I deploy master collection or photoshop extended I get mixed results. On some machines it runs fine and installs but on most it fails. Casper gets to 97% then waits then fails.
    I get the following log from the install.
    /usr/sbin/jamf is version 8.52
    Executing Policy Deploy CS6 Master Collection...
    Downloading BOM for cs6 master collection WT_Install.pkg...
    Downloading Components of http://casper.wellcomeit.com:80/Casper/Packages//cs6 master collection WT_Install.pkg...
    Installing cs6 master collection WT_Install.pkg...
    Installation failed. The installer reported: 2012-07-23 17:13:17.733 installer[64015:312b] PackageKit: *** Missing bundle identifier: /Library/Receipts/AppleMobileDeviceSupport.pkg
    2012-07-23 17:13:17.837 installer[64015:312b] PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    2012-07-23 17:13:17.839 installer[64015:312b] PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    2012-07-23 17:13:18.266 installer[64015:312b] PackageKit: *** Missing bundle identifier: /Library/Receipts/iTunesAccess.pkg
    2012-07-23 17:13:18.267 installer[64015:312b] PackageKit: *** Missing bundle identifier: /Library/Receipts/iTunesX.pkg
    2012-07-23 17:13:18.937 installer[64015:312b] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2011_en_dock.pkg
    2012-07-23 17:13:18.976 installer[64015:312b] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2011_en_launch.pkg
    2012-07-23 17:13:19.241 installer[64015:312b] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2011_en_quit.pkg
    2012-07-23 17:13:19.441 installer[64015:312b] PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RI1482E3L.pkg
    installer: Package name is Adobe Setup
    installer: Installing at base path /
    installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
    Running Recon...
    Gathering Application Usage Information...
    Finding Extension Attributes...
    I have tried using afp not http and have made sure in the aemee package that ignor conflicts is checked and air installers is diabled. The box in casper admin for this must be installed to the boot volume at imaging time is also checked.
    On the problem machines I have tried running the aemee packages locally and they fail as well.
    Im very confused by it all and at  the stage of pulling my hair out ( whats left of it!)
    Sorry for the long post, I thought more info would be better
    Daniel

    Daniel,
    I hope I have replied before you have pulled all your hair out
    Can you supply us with the logs from the client machine ? There is two I would like to see <product_name><time_stamp>.log which can be found in
    /Library/Logs/Adobe/Installers/
    and also
    oobelib.log Location /tmp
    You can mail me at [email protected]
    Cheers
    Karl
    CS Enterprise Systems Engineer

  • No Hyperlinks when I upload website via ftp - Freestyle theme

    Hi
    I've just got my first iMac (never going to get a PC again!) and changed my mates' band website that used to be on FrontPage. Its slimmed down for now but the basics are there, standard theme too but it is my first ever go at using a mac.. However, after I uploaded it the Welcome page has no Hyperlinks bar. I've checked everything I can think off, tested it by publishing to a folder etc but they don't appear in the internet (all works fine in iweb and in the folder).
    One thing I did wonder about is that I've added extra pages and the space used for the hyperlink bar has dropped down in size to accommodate more links, would that affect it and if so, how can I fix it?
    The site address is http://www.olly-alcock-band.co.uk - at the moment we have the welcome page but no way to get to the others! I suspect its to do with the size of the hyperlink bar and/or another frame being in front, I just can't figure out what/how. Any advice would be greatly appreciated.

    It seems to be server side problem, from my end; none of your .js or .css files are found
    http://www.olly-alcock-band.co.uk/Welcome_files/Welcome.js
    http://www.olly-alcock-band.co.uk/Welcome_files/Welcome.css
    The above two files are supporting files for your Welcome page, you need to sort out with your site host.

  • Problems accessing home network via FTP

    I get a -50 error when I try to FTP thru my company's wired Ethernet network to my home network via the "Connect to Server" command in the Finder.
    However, I can connect with my home network using FileZilla thru the same (wired) network.
    And I can connect to my homework via my company's wireless network from the Finder.
    Any ideas what might be blocking me from FTP'ing to my home network via the Finder and thru the wired network, and how to resolve?

    At least a partial answer.
    If I use the command FTP://username@IP Address, I'm able to connect. But I don't have to use my username with wireless.

  • Problems uploading via FTP-host

    I have very often (most of the time actually) problems uploading a website via the FTP-host. Changes I made are often not uploaded etc. Is this a common problem or am I the only one?

    Please provide more details as what exactly is not updating while ftp upload process , is it any text , image etc ? does this happens with a specific page or any page ? The changes should get update once you upload the files to same location , unless there is any sync issue with server.
    Thanks,
    Sanjit

  • Working with remote site via FTP - getting html only

    I''m using DW to remotely work with the website via FTP. Is
    it possible to make it NOT download all the assosiated files with
    the html, that I'm edtiting? I switched on the prompts in getting
    and putting stuff, but it still tries to download or upload
    additional stuff. I need it to deal only with html.
    Thanks for any clues.

    > It works good, it is just disturbing, that it is trying
    to upload
    > everything
    > besides pages.
    Works good? Make one silly mistake and you are toast.
    Use a version control system instead. DW has a primitive one
    in
    Checkin/Checkout, but it may be all you need.
    I would NEVER do what you are doing in a multi-user
    environment....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "simterra" <[email protected]> wrote in
    message
    news:fpki1l$2ci$[email protected]..
    > hmm, because several people work with my site on the
    same documents, it
    > generates a mess if they deal with editing local pages
    and uploading them
    > to
    > the server. Working directly with pages from the server
    solve this
    > problem -
    > they're always getting the last version (given that time
    they work with
    > them is
    > largely different).
    >
    > It works good, it is just disturbing, that it is trying
    to upload
    > everything
    > besides pages.
    >

  • How to upload site created with Dreamweaver via FTP to the iWEB server?

    Hi everyone,
    I recently created a site on Dreamweaver and want to upload the site, via FTP to the iWEB server. My questions are the following:
    1. What is the FTP host address?
    2. How do I connect to my website via FTP?
    Any help on the following questions will be much appreciated.
    Thanks!

    Hello Lauretta and welcome to the forum.
    You do not connect to iDisk via FTP. iDisk uses WebDAV. Also you do not need to manually upload the published files to iDisk as recommended buy others in this thread. Once the site and server is set up in DW you can publish and upload directly through DW.app Check out this post for more info.

  • Settting Up Time Capsule to Access NAS Device Via FTP

    Have had problems accessing my NAS via FTP when trying to connect to it from an outside network. Have never been able to access and login either anonymously or using one of the user names and passwords that I have set up from outside the home. When at home I am able to connect to the NAS via FTP on the LAN no problem so I am almost positive that I have not properly set up the Time Capsule.
    My NAS also uses a web server feature that I am able to use by forwarding the proper ports on the Time CApsule and setting up a DynDNS account.
    I would just use the web server feature but it's limited to accessing files under 2TB.
    Would GREATLY APPRECIATE any advice on how to solve this problem.

    charliprkr wrote:
    Have had problems accessing my NAS via FTP when trying to connect to it from an outside network.
    Welcome to Apple's discussion groups.
    It sounds like you need to configure your Time Capsule to do "port mapping" of FTP ports to your NAS. In AirPort Utility enter "manual setup" mode with the Time Capsule, then select the Advanced panel and the Port Mapping tab. Click the plus sign at the bottom, then choose "FTP Access" as the service. Supply the LAN IP address of your NAS. Now direct your FTP requests to the WAN address of the Time Capsule.

  • I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

    I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

    Hello Els,
    it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
    To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
    To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
    Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
    And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
    http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
    Mac: Mac OS X (Use: Show additional download options)
    http://filezilla-project.org/download.php
    Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
    Good luck!
    Hans-Günter
    P.S.
    Since I use two screens, the whole thing became even more comfortable.

  • Problem while deploying new logon screen par file via NWDS

    hi
    i have a problem with deploying .par files out of the NWDS.
    i want to change the look of the logon screen in our EP Portal (SAP NetWeaver 2004s).
    when i just import the (working one) par file into NWDS and deploy it without ANY changes i get then an error when trying to call the portal:
    instead of the logonscreen i get some IView error (like IView: N/A).
    if i just copy the par file, and put it back to the pcd, everything works fine.
    my problem seems to be the "compiling/deploying" via NWDS.
    any suggestions?
    i followed the guide:
    http://help.sap.com/saphelp_nw04/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
    i followed also the BLOG:
    Modifying The Logon Par(or customising the Logon Screen)
    and the help:
    http://help.sap.com/saphelp_nw04/helpdata/en/23/c0e240beb0702ae10000000a155106/content.htm
    thanks for your help.
    markus

    Markus,
    If you import the par file using NWDS, most likely you wouldn't import the associated jar files (I think 2 jars) that are originally part of the par file. So, when you make changes and update your custom jar, it would lack the two jars and your application would fail. Try downloading the par file using System Administration -> Support -> PCD Administration -> Browse Deployment..
    Save the jar file on desktop and then import it to NWDS.
    Hope this helps,
    Kiran

Maybe you are looking for