Problem to establish good connection via ms sql jdbc on ms sql server expre

Hi ,
I had error below in testing connection on stand alone db server ms sql server 2005 express edition:
Method=cursor;
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]End of stream
was detected on a read.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Sour
ce)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Sou
rce)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown S
ource)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at Connect.getConnection(Connect.java:28)
at Connect.displayDbProperties(Connect.java:45)
at Connect.main(Connect.java:82)
at Connect.main(Connect.java:82)
Error Trace in getConnection() : [Microsoft][SQLServer 2000 Driver for JDBC]End
of stream was detected on a read.
Error: No active Connection
I got this error in lauching the codes :
import java.sql.*;
* Microsoft SQL Server JDBC Test1 program
public class Test1 {
public Test1() throws Exception {
// Get connection
DriverManager.registerDriver(new
com.microsoft.jdbc.sqlserver.SQLServerDriver());
Connection connection = DriverManager.getConnection(
"jdbc:microsoft:sqlserver://SERGE_TCHITEMBO:1433;databaseName=AutClust","autoclust","clust");
if (connection != null) {
          System.out.println();
          System.out.println("Successfully connected");
          System.out.println();
          // Meta data
          DatabaseMetaData meta = connection.getMetaData();
          System.out.println("\nDriver Information");
          System.out.println("Driver Name: "
          + meta.getDriverName());
          System.out.println("Driver Version: "
          + meta.getDriverVersion());
          System.out.println("\nDatabase Information ");
          System.out.println("Database Name: "
          + meta.getDatabaseProductName());
          System.out.println("Database Version: "+
          meta.getDatabaseProductVersion());
}// Test1
public static void main (String args[]) throws Exception {
Test1 Test1 = new Test1();
I google this error but i did find response.
Please could help me.
Vovo.

This is a database sever side forum. Your problem is client side db driver connectivity (the connection does not even reach the database from your description).
Thus I doubt that you will have much luck in getting the problem resolved here. I suggest you try a client language/driver forum instead.
Side note: I would add a test method to the code that takes IP/hostname and port as input, and then simply attempts a tcp socket open with these parameters. If socket connect works, close it and return a success. Else return a fail. Call this with the IP/hostname of the db server and port number of the server's listener (default 1521). Easy method to test network connectivity from client device to database server, without using any JDBC driver class and dealing with issues such as app protocol version differences and so on.

Similar Messages

  • Attempt to establish a connection via NiConnect has failed

    Hi
    We recently migrated from Windows to UNIX.
    The RFC destination between SAP to XI, was working fine before migration and after migration it is not working.
    I checked the System log using SM21.
    Following are the error details
    "The attempt to establish a connection via NiConnect has failed.  The
    following system log entries specify the NiConnect parameters.
    Check whether the target system or the target gateway are active."
    When we test connection from SM59
    Following are the error details
    "Connection Error
    Error when opening an RFC connection
    ERROR: service 'SAPGW00' unknown
    LOCATION: SAP-Gateway on host DEVSRV / sapgw00
    DETAIL: NiHsLGetServNo: service name cached as unknown
    COMPONENT: NI (network interface)
    COUNTER: 6511
    MODULE: nixxhsl.cpp
    LINE: 776
    RETURN CODE: -3
    SUBRC: 0
    RELEASE: 700
    TIME: Tue Jun  2 11:35:31 2009
    VERSION: 38
    Can you pls help
    Regards
    Madhan D

    Have you specified correct gateway information in SM59 because it looks like sap gateway is incorrect..
    thanks sunny

  • Time Machine - Problem with establishing a connection to the server

    Using LionMac OS X Version 10.7 and when attempting to setup Time Machine to make backupto my ReadyNas Duo, the setup fails and I receive the following message(translated from Danish):
    “There wasa problem with establishing a connection to the server ”SERVERNAME”.
    The versionof the server that you attempt to establish connection to, is not supported.Contact the system administrator to solve the problem.”
    Any ideasfor a solution?

    Please follow these instructions:
    Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
    https://discussions.apple.com/thread/3258472

  • Printing problems with HP 1012 connected via Airport Extreme - resolved?

    I originally posted on this issue in a long-running discussion on HP printer issues.
    http://discussions.apple.com/message.jspa?messageID=10109788#10109788
    Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
    Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
    Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
    a. I turned off AP on the iMac.
    b. I unplugged the AE base station for one minute+, then re-powered it.
    c. I opened my MBP with 10.5.7. Started up Airport Utility.
    d. I renamed the base station. Left all other settings alone.
    e. I installed the 7.4.2 firmware upgrade.
    f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
    g. I turned on AP on the iMac.
    Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
    Too early to tell if I will have any further problems if if it permanently fixed.
    Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
    Stan

    I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
    I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
    So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
    How to:
    Turn printer on.
    open System pref/ printer-fax/ add printer
    Select hp desktop 5100
    (name: -- Change name if you want - I kept " hp deskjet 5100"
    Location: Your computer
    Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
    Select OK

  • Establishing a connection between a developer computer to an AD server

    Hi All,
    I have a computer where my developers are writing code to establish a connection to the AD server.
    Developer's computer and AD server are different domains. Is there a way out to establish the connection ?
    Clue: I m not able to ping and lookup the AD domain.
    Thank you for your support in advance.
    Regards, Prabhu

    Developer's computer and AD server are different domains. Is there a way out to establish
    the connection ?
    What do you mean exactly? Do you that developer computers can browse AD objects within the other domain? If yes, then simply create a trust relationship between both domains.
    More details here: http://technet.microsoft.com/en-gb/library/cc775736%28v=ws.10%29.aspx
    Clue: I m not able to ping and lookup the AD domain.
    For the Ping, you need to check that:
    You do not have a firewall or a security software/equipment that is dropping ICMP traffic
    You do not have routing problems
    For the lookup, you can configure conditional forwarders between domains: http://technet.microsoft.com/en-gb/library/cc754941.aspx
    Also, you can use NSlookup for checks and troubleshooting: http://social.technet.microsoft.com/wiki/contents/articles/29184.nslookup-for-beginners.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Problems with sharing internet connection via usb

    I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works and settings are the same as when usb internet share did work. Any idea on how to solve this except downgrading?
    For my troubleshooting, has anyone been able to share internet via usb to PC (or Mac) with iOS 8 / iTunes 12.
    PS I have unliited cellular data and iPhone is my only internet connection at home,

    Mark,
    There is a excellent book that teaches you how to do this (and other things) called Mac OS X Tiger: The Missing Manual (others of course)
    If I remember correctly (book is on loan)
    1: System Preferences>Network>Show>network port configurations (click unlock)
    2: Click>Built in Firewire and drag to the top of the list (why I forget why)
    3: System Preferences>Sharing>Internet>Share your connection from: Built in Ethernet (or what your using for your connection in) >To computers using: Built in Firewire>Start
    4: Mac #2>Hook up Firewire 400 cable>System Preferences>Network>Location>New Location
    5: Show>Network Port Configurations>Drag Built in Firewire to top of list and enable.
    6: I also think you have to enable Personal Web Sharing on the Mac hosting the internet.
    anyway play with it, you'll figure it out. if someone doesn't get to you.

  • Firefox 4 recently downloaded will not create a dial up window. The only way I can get it to work is by establishing a connection via oulook. Firfox then works fine. How do I get Firefox 4 to reqest a dial up window

    Since we downloaded Firefox 4 we have only been able to connect to the internet by using the dial up of outlook. Once connected in this way Firefox 4 works fine.
    We have zone alarm firewall and NOD32 antivirus.

    I have now managed to get AX working on my BT home hub. I took my second non-working unit back to Apple in Solihull and got them to test it in store. They agreed it wasn't working. They then tested another unit in store and that did work so I brought that home. It would be worth you doing the same as I got a 10% discount off my next purchase of anything at Apple for my troubles.
    I set my homehub security to None (from WEP - in homehub manager/advanced/wireless/security), plugged in my AX to homehub using an ethernet cable, then ran Airport utility and after a couple of runs it finally picked it up. I was able to set the configurations I wanted and 24 hours later it is still working. I set my homehub security settings back to WEP as soon as the AX was configured.
    I also installed airport utility on my son's windows laptop and that is now able to print wirelessly as well. So, finally a result.
    I would suggest you take your unit back to where you bought it from and get them to test it. If they offer you another one ask for a Mac genius
    to test it in store for you first. Also ask them to run through the installation procedure with you. Don't forget to ask for something for your troubles:)
    Hope that helps,

  • Can connect via VPN, but can't access AFP server on same Xserve

    Hi:
    I've set up our XServe with MacOS X Server 10.5.2 to do AFP and VPN (L2TP only; PPTP is disabled). The XServe is a standalone server, not connected to any other direstory server.
    I can connect to the XServe's AFP server from my Mac over our wired and wireless network. The AFP server shows up in the sidebar of Finder windows. So far, so good.
    I am able to successfully connect to our network via the VPN with Mac OS X 10.5.2 client (on two different machines) using L2TP through our network's firewall (on a Netopia T1 router; UDF ports 500 and 4500 and IP Protocol 50 and 51 are open) using a shared secret.
    But I cannot connect to the XServe itself to use Server Admin or AFP (using afp://server.company.com or afp://xxx.xxx.xxx.xxx via the Go > Connect to Server command).
    The error I get while connecting to the 10.5.2 AFP server is Some data in apf://server.mycompany.com could not be read or written (Error Code -36 ). I saw this error associated with a SMB problem in 10.4.x, but SMB is not running.
    Other iChat users in my office also do not automatically show up in the Bonjour list when I connect to the network. Other computers on our network do not appear in the sidebar of a Finder window. (I'm told these are to be expected, as Bonjour isn't supported (in the "local area Bonjour" over a WAN link - it's purely a multicast feature on the network in the office, and won't be routed across the VPN link. True?)
    Now, here's the odd part. There is a second server (v10.4.11) on our network running AFP. I can connect to it (using afp://server.company.com via the Go > Connect to Server command) and mount its various sharepoints via the VPN.
    The only thing I see in the VPN log that seems amiss is this (but I have no idea what it means):
    Tue Mar 11 23:09:27 2008 : Unsupported protocol 0x8057 received
    --Both the 10.5.2 and the 10.4.11 servers have DNS properly configured (though our ISP; we're not running our own DNS).
    --Both servers and the client have public IP addresses and have the same subnet mask. Network Utility confirms this while connected to the VPN.
    --NAT is not running. The ISP is responding with public IPs for the servers.
    --The firewall for the 10.5.2 server is not running (but will be once I get this all working).
    --The IP address range for the VPN server doesn't overlap our DHCP pool (which also currently uses public IP addresses).
    --Any user can access any service.
    --No network routing definitions have been set up.
    --In essence, I've followed the steps on Pages 141-142 of the Network Services Admin Guide.
    One other note: After I connect, the Network Preferences > VPN > Advanced > TCP/IP window shows the IP address for the client just fine (assigned from the VPN pool), but lists the router as having the IP address of the XServe (rather than the router on the network). Is that normal?
    I'm hoping I don't need to have the XServe run DNS as an internal LAN DNS server.... And I'm not sure why I would have to if I can already successfully connect to the 10.4.11 AFP server .
    What simple step am I missing?
    TIA,
    mm

    "I am able to successfully connect to our network via the VPN with Mac OS X 10.5.2 client (on two different machines) using L2TP through our network's firewall (on a Netopia T1 router; UDF ports 500 and 4500 and IP Protocol 50 and 51 are open) using a shared secret."
    I suspect you mean UDP ports and you might need UDP port 1701 open too.
    You only need IP protocol 50 (ESP), protocol 51 (AH) isn't used. And ESP is only used when client and server isn't behind NAT (when NAT is used only the UDP ports are used).
    "Unsupported protocol 0x8057 received"
    This is usually seen when you can't get GRE through but since you don't use PPTP I can't be sure why this is registered in the logs. Sometimes when connecting using PPTP you have to disconnect and then reconnect for everything to work - you might try this for L2TP too.
    But if you already can reach services on any LAN nodes through the VPN I wouldn't bother with it.
    As you have a firewall in front of the server you need a second alias IP on the server that you can use to get at the services running on the server through the VPN. The firewall blocks all ports protocols not opened - that's why you can't use the server main IP even if the VPN is up.
    The netmask is used by all nodes to determine how big your subnet is: what part of the IP number is the network number and what range the node number is in => really: should traffic be directed to a node on the same LAN or sent directly to the gw/router for forwarding.
    What you can't do is connect from a NATed network to another NATed network that both are using the same network number. (That's why people should stay away from using the "default" 192.168.0.0/24 and 192.168.1.0/24 networks for VPN server LANs).
    Try your settings at http://www.jodies.de/ipcalc to see what I mean.
    "...lists the router as having the IP address of the XServe (rather than the router on the network). Is that normal?"
    Yes. The VPN server is the VPN gw/router.
    "The firewall for the 10.5.2 server is not running (but will be once I get this all working)."
    If you already have a firewall in front of your servers that is a bit redundant.
    "--No network routing definitions have been set up."
    "I'm hoping I don't need to have the XServe run DNS as an internal LAN DNS server"
    You need routing definitions if you want to setup a split tunnel VPN or all traffic is routed through the VPN when connected. The VPN becomes the default gw.
    Without ipforwarding ON in the server you can only reach nodes on the server LAN - not Internet.
    DNS is needed for your servers forward and reverse names/IPs for advanced services but doesn't need to run in any of your own servers.
    If you decide to do a split tunnel VPN config (adding public and private routing definitions) a reachable DNS IP for VPN clients (in VPN config on server) is needed for VPN clients or they can't use names to find anything. To reach this DNS IP if public/not on your server LAN, you need your server to forward IP DNS lookups and have a routing definition for it.
    A split tunnel VPN only send traffic for your server LAN through the VPN and all other traffic directly to the local gw/router (Internet).

  • I have connected via VPN but can't see lion server .private

    when I am in my local network at home I simply go to finder and click on my server and connect to it. When I VPN form the net into my servers local network I dont see it in my finder? I know I am in the next work being I did a IP Check but am I am missing something how am I to get to the server to get to my files? it is set up as a .private.

    Spoke to an apple rep today. when accessing via VPN go to finder then go to the top menu click GO at the bottom of the drop down will be connect to server simply add the IP address to access.

  • Connection Via SQL*Plus Worksheet

    Dear Friends,
    I have a peculiar problem. I am connecting via 9i client to a oracle 8i server.
    I could manage to access the database via 9i client's EM and SQL scratch pad. But I am unable to connect via SQL*plus worksheet.
    I got this error
    ERROR:
    ORA-12154: TNS:could not resolve service name
    While I test the service name via Oracle Net manager, it is successful.
    Anybody could shed some light.
    Regards
    Kumar

    Enterprise Manager still has SQL*Plus Worksheet. See:
    http://download-west.oracle.com/docs/cd/B10501_01/em.920/a96670/ch_alone.htm#1015179
    -- CJ

  • Can't establish ftp connection between a Xserve and a PB

    We want to use a Xserve (Mac OS X Server 10.4.8) to provide webhosting, but experience problems in establishing ftp connections using a PowerBook (Mac OS X 10.4.8).
    On a WinXP-based notebook using the same Internet connection, anything works fine, just not on my PowerBook.
    This is what happens when trying to establish a ftp connection (via terminal):
    I type: ftp [email protected]
    Returns:
    220 star1.local FTP server ready.
    331 Password required for user.
    I provide the password, anything looks fine, get this output:
    230 User starenterprise logged in.
    Remote system type is UNIX.
    Using binary mode to transfer files.
    ftp>
    Okay, now I want to see what files are in the directory using "dir" command ("ls" brings same result). This output is shown:
    502 'EPSV': command not understood.
    227 Entering Passive Mode (132,78,123,92,42,115)
    Now I can either press CTRL+C to escape or when waiting around one minute, then it states this:
    421 Service not available, remote server timed out. Connection closed
    On a ftp client software like CuteFTP Mac it shows "Can't open data connection" instead of, but result is the same.
    I read through some articles I found here, but nothing compared to my problem. Please help.
    I should mention one thing Apple's support told me: Since I have the same username and UID on my PowerBook as well as on the xServe, it could bring problems. However I have then added a new user to my PowerBook, result is the same. And Apple's support left helpless so far.

    You said: "Not really answered, the problem persists and I now go on and let
    Apple work on it again"
    As a native English speaker, I must say (and doubt any would disagree) that
    your statement implied: "No one here has actually helped me fix this problem,
    and now I'm waiting for Apple to fix it"
    Please take care to the word "again" I used; this implies that Apple has tried to solve the issue before but failed (in fact, they stated to call me back, but this is weeks ago) and so I posted this here at the discussions.
    Unfortunately I only have access to the "free" support (well, free is not the right word when paying 12 cents per minute for the phone call).
    And this means (at least I can speak for the German part of Apple) that operators on the phone look at their knowledgebase and sending articles by e-mail; questions going deeper are resulting in a "we call you back" answer. Sometimes they phone back, sometimes not. Sometimes they are helpful, sometimes (or should I say "in most cases") they just give hints or ask me to investing a nice amount into premium support.
    Don't misunderstand me in the direction that I demand assistance from this forum - I'm more than gradeful if I get help (and rewarded this always with giving points), it has saved me several times (many, many, many times) for doing time consuming investigations and making trial-and-error experiences by myself. If I cannot get more assistance, well I have to look elsewhere and so be a bit impertinent to Apple's support. Perhaps it helps
    You are right, FTP itself works correctly. It even works fine on the WinXP notebook residing at the same LAN as my PB. Therefore the issue is at the PB's firewall very likely (or a strange relationship between two firewalls which seems not to affect WinXP).
    But as you indicate, it makes no sense to lower down security just for doing ftp, especially since SSH works well. However since I have no problems doing ftp sessions with other servers, I would be eager to find the reason why it refuses in this case, even this just means feeding my curiosity
    So if I come to new insights, I post them here. But I feel that I'll really need your wishes for luck to solve this problem Let's see...

  • ***ANSI connection via socket

    Hi
    I need help!!
    How can i establish an ANSI connection via socket??? because the server dont let me connect with a VT100 connection

    The book Core Java 2 from Sun has a good discussion on that.
    There is a thread in The Water Cooler titled YAT which is a
    discussion of that book. Read through it (there are about 3400+ posts).
    They should have it. It would take too long for me to re-search my book.
    Do a search on the Java site for ANSI or Character Map, you
    will probably find documentation and tutorials on it.
    Let me know if you can't find them.

  • Internet connection via Airport Extreme/router thats not working, why?

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

  • IBook G4 Can't connect via Ethernet?

    While we were away lightning took out several devices. Among them was the Airport Extreme Base Station and the cable modem. The modem has been replaced. I have an iMacG5 and an iBookG4 both running 10.4.11. The iMac can establish a connection via Ethernet (all this happened yesterday so I have yet to replace the Airport). The laptop apparently won't accept an IP address from the router/modem and won't connect to the internet.
    I did see a message saying that my network settings had been changed by another application but don't know if this figures in the mix.
    Anyone have any ideas how I ought to approach getting the iBook back online?

    I did see a message saying that my network settings had been changed by another application but don't know if this figures in the mix.
    Anyone have any ideas how I ought to approach getting the iBook back online?
    I think you ran across the security update bug in 10.4.11 the deals with an ethernet connection. Here is the workaround:
    http://discussions.apple.com/message.jspa?messageID=8185915#8185915
    Here is more of the story:
    http://discussions.apple.com/thread.jspa?threadID=1730909&tstart=0

  • Magic Mouse no Longer connects via BT

    Hello All!
    I have a MBP, 2.4GHz with Intel Core 2 Duo and recently upgraded to OSX 10.8.
    Since the upgrade I have been having great difficulty in getting my Magic Mouse to connect via BT.
    Previous to the upgrade everything worked fine, the mouse would wake the computer and connect with out any issues.
    After the upgrade the mouse will not wake the computer and will only connect after I restart the computer, well that was yesterday restarts today aren't even working any more.  My BT keyboard works fine and I have no problems with waking or connecting via the BT keyboard only the mouse.
    Any suggestions greatly appreciated!
    Update:
    I just finished repairing Disk Permissions - No Help
    Turning Blue Tooth off then back on - No Help
    Trying to manually connect the mouse - no help
    New Batteries - no help
    Reset the SMC - no help
    Reset the PRAM - no help

    I'm now on 10.8.2 and things seem to be better but not completely resolved.  After installing the last update I deleted my mouse, restarted the computer and then paired the mouse again.  Things are much better, my mouse will wake the computer now but only if the computer is asleep for a 'short' period of time.  Overnight it won't wake or connect, I generally need to use the track paid, go to the BT icon & select my mouse then hit connect.  That seems to get things going but it's still a pain.......
    At least I don't have to restart the computer every time.....

Maybe you are looking for

  • WORD Error message -- Report from Template

    Hello everyone, I try to generate a "Report from Template" with transaction CG03. I can select the generation variant and the parameter values in the next two pop-ups. WORD is starting but then there is the error message: "Word cannot read this docum

  • Ipod wont sync with Itunes

    Hello! Ive plugged my Ipod into my laptop with Itunes open and it normally syncs automatically, when i came to do it today it wont sync and when i try to do it from the file menu the sync option is greyed out. Itunes wont even show my Ipod on the lef

  • File transfer Open dataset CSV file Problem

    Hi Experts, I have an issue in transferring Korean characters to a .CSV file using open dataset. data : c_file(200) TYPE c value ' INTERFACES\In\test8.CSV'. I have tried open dataset  c_file for output LEGACY TEXT MODE CODE PAGE '4103'. open dataset 

  • FICA -IDOC for posting the billing data from NON-SAP ISU system

    Hi, Kindly note we are implementing NON-SAP ISU with SAP FICA for the finance implementation. In this context, we ahve identified BAPI for BP and CA. We have decided to go for transaction posting through the transaction FPE1. For this, we are looking

  • How to send the Error notification

    Hi,   Hi,      I am having the one scenario like , i send the one record to destination using outbound that time i stored in one table sent time and date and they are send the ACK to me that time i update the table with receiving time and date using