Establishing a connection between a developer computer to an AD server

Hi All,
I have a computer where my developers are writing code to establish a connection to the AD server.
Developer's computer and AD server are different domains. Is there a way out to establish the connection ?
Clue: I m not able to ping and lookup the AD domain.
Thank you for your support in advance.
Regards, Prabhu

Developer's computer and AD server are different domains. Is there a way out to establish
the connection ?
What do you mean exactly? Do you that developer computers can browse AD objects within the other domain? If yes, then simply create a trust relationship between both domains.
More details here: http://technet.microsoft.com/en-gb/library/cc775736%28v=ws.10%29.aspx
Clue: I m not able to ping and lookup the AD domain.
For the Ping, you need to check that:
You do not have a firewall or a security software/equipment that is dropping ICMP traffic
You do not have routing problems
For the lookup, you can configure conditional forwarders between domains: http://technet.microsoft.com/en-gb/library/cc754941.aspx
Also, you can use NSlookup for checks and troubleshooting: http://social.technet.microsoft.com/wiki/contents/articles/29184.nslookup-for-beginners.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

  • Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be establishe​d. Please check your setup and try again."

    Hi.
    I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
    I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
    Steps I have taken:
    * installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
    * The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established.  Please check your setup and try again."
    Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
    I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?). 
    Then how about the Infrared option?  I see on the PDA it has a red area that one can "beam" info.  Is this the same as Infrared or my 2nd option?
    I love my Visor and want to continue using it, but need to backup the valuable info!
    Any help with this would be greatly appreciated!
    THANKS!!!!!
    Post relates to: Visor Pro

    Hello lwalbring and welcome to the Palm forums.
    Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option.  Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
    Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico.  This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2.  Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2.  The software is free and the link is all the way at the bottom of the screen.
    Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter.  Some laptops still have IR ports and most desktops don't.
    Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
    Alan G

  • No connection between iPhone and computer

    I have No connection between iPhone and computer. Please help me. My iPhone (4s) went nuts a little while ago. Nothing happend when I connected the charger. I had to take out and put it back in again and again and again, between 2-10 times before the charger finally was connected. It's been like this for a while now and a did'nt really have that mutch problem with it. Until today when I tried to sync/backup/restore the whole phone. It started to sync but stoped at the sync of the 5:th app. tried to start over but now my computer can't "find" the phone. It says that the USB-device is not reconizeble.
    Please help me.
    Sorry for the bad english.

    See Here...
    Device Not Recognised
    http://support.apple.com/kb/TS1538
    And Here
    iPhone, iPad, or iPod touch not appearing in iTunes
    iPod appears in Windows but not in iTunes
    Also, Here...
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • Establish new connection in SQL developer

    hi,
    i am trying to establish new connection in sql developer, i m just new in orcale and installed 10g , from where i can get all the required information for new connection like HOSTNAME, port , sid etc
    pls someone can help me on this

    Depends. All this was presented to you when installing. If you didn't wrote anything down...
    If you accepted all defaults, it still depends on your DB version (which?).
    K.

  • How to establish the connection between crm and r/3

    Hi,
    Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
    Could any one tell me where to find adapters and plugins for this.
    Thanks in advance.
    Ajey

    Hello Ajey,
    in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
    B01: CRM Generation
    C71: CRM Connectivity
    B09: CRM Replication
    from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
    Regards
    Gregor

  • Need help in establishing the connection between BO federator and Oracle DB

    Hi Experts,
    I am working on BO federator and now I need to establish the connection between BO federator and the oracle db to use this as the source for the federator,
    I know we need to download the respective oracle DB connect .jar file from the oracle web site and place it under the drivers section(folder) of the BO Federator.
    Now I need to understand what is/are the next steps I need to follow and what are the values for the following parameters which are required during establishing the connectivity while creation of data sources from federator end.
    Host Name:
    Port:
    SID:
    Schema:
    Please share the details, any help will be highly appreciated.
    Thanks with regards,
    Vinay

    Hi,
    Please find below details.
    Host Name: Server Name or IP Address (Oracle)
    Port: (oracle Server Port)
    SID:SID is a unique name for an Oracle database instance. -> To switch between Oracle databases, users must specify the desired SID <-. The SID is included in the CONNECT DATA parts of the connect descriptors in a TNSNAMES.ORA file
    Schema: no need to enter(Blank)
    Thanks,
    Amit

  • Client could not establish a connection to the remote computer

    Sir we are using Windows 2008 Server standard licence edition and using Microsoft Cal open licence  (Total 25). Our system are working from smoothly from 1 years. But from one week we have facing client could not establish a connection to the remote
    computer.
    Sir I am talking from Integral Bank, Jaipur Sir please solve our problem.
    With warm regards,
    Hariom
    M-09875156100
    mail : [email protected]

    Sir we are using Windows 2008 Server standard licence edition and using Microsoft Cal open licence  (Total 25). Our system are working from smoothly from 1 years. But from one week we have facing client could not establish a connection to the remote
    computer.
    Sir I am talking from Integral Bank, Jaipur Sir please solve our problem.
    With warm regards,
    Hariom
    M-09875156100
    mail : [email protected]

  • Can't establish wireless connection between the printer and computer.

    I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window  in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit  altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

    Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you. 
    I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
    When you say; 'I reset the printer to factory settings', how where you trying to do this? 
    I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
    To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
    "I've checked to make sure both computer and printer are on the same network."  Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads 
    To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
    ... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
    ... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
    ... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues.  HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer.  I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer  Please let me know if any of these steps resolved your issue, or the details of what happened.  I look forward to hearing from you, hopefully with good news!   Thanks, 

  • Can't establish ftp connection between a Xserve and a PB

    We want to use a Xserve (Mac OS X Server 10.4.8) to provide webhosting, but experience problems in establishing ftp connections using a PowerBook (Mac OS X 10.4.8).
    On a WinXP-based notebook using the same Internet connection, anything works fine, just not on my PowerBook.
    This is what happens when trying to establish a ftp connection (via terminal):
    I type: ftp [email protected]
    Returns:
    220 star1.local FTP server ready.
    331 Password required for user.
    I provide the password, anything looks fine, get this output:
    230 User starenterprise logged in.
    Remote system type is UNIX.
    Using binary mode to transfer files.
    ftp>
    Okay, now I want to see what files are in the directory using "dir" command ("ls" brings same result). This output is shown:
    502 'EPSV': command not understood.
    227 Entering Passive Mode (132,78,123,92,42,115)
    Now I can either press CTRL+C to escape or when waiting around one minute, then it states this:
    421 Service not available, remote server timed out. Connection closed
    On a ftp client software like CuteFTP Mac it shows "Can't open data connection" instead of, but result is the same.
    I read through some articles I found here, but nothing compared to my problem. Please help.
    I should mention one thing Apple's support told me: Since I have the same username and UID on my PowerBook as well as on the xServe, it could bring problems. However I have then added a new user to my PowerBook, result is the same. And Apple's support left helpless so far.

    You said: "Not really answered, the problem persists and I now go on and let
    Apple work on it again"
    As a native English speaker, I must say (and doubt any would disagree) that
    your statement implied: "No one here has actually helped me fix this problem,
    and now I'm waiting for Apple to fix it"
    Please take care to the word "again" I used; this implies that Apple has tried to solve the issue before but failed (in fact, they stated to call me back, but this is weeks ago) and so I posted this here at the discussions.
    Unfortunately I only have access to the "free" support (well, free is not the right word when paying 12 cents per minute for the phone call).
    And this means (at least I can speak for the German part of Apple) that operators on the phone look at their knowledgebase and sending articles by e-mail; questions going deeper are resulting in a "we call you back" answer. Sometimes they phone back, sometimes not. Sometimes they are helpful, sometimes (or should I say "in most cases") they just give hints or ask me to investing a nice amount into premium support.
    Don't misunderstand me in the direction that I demand assistance from this forum - I'm more than gradeful if I get help (and rewarded this always with giving points), it has saved me several times (many, many, many times) for doing time consuming investigations and making trial-and-error experiences by myself. If I cannot get more assistance, well I have to look elsewhere and so be a bit impertinent to Apple's support. Perhaps it helps
    You are right, FTP itself works correctly. It even works fine on the WinXP notebook residing at the same LAN as my PB. Therefore the issue is at the PB's firewall very likely (or a strange relationship between two firewalls which seems not to affect WinXP).
    But as you indicate, it makes no sense to lower down security just for doing ftp, especially since SSH works well. However since I have no problems doing ftp sessions with other servers, I would be eager to find the reason why it refuses in this case, even this just means feeding my curiosity
    So if I come to new insights, I post them here. But I feel that I'll really need your wishes for luck to solve this problem Let's see...

  • Cannot establish Bluetooth connection between iphone4 and ipad2

    I have an iphone4 which cannot connect via Bluetoooth with ipad2, even though I tried all that is said in Apple support , but still no success. Really cannot understand as my iphone4 connects to a Bluetooth ear piece which is of different make and these 2 piece's are from Apple but cannot establish a connection via Bluetooth. It's surprising. So please help and advice.
    thanks Guys

    The iPhone is not designed to Bluetooth pair with a computer or an iPad except for personal hotspot (sharing the phone's cellular internet connection). It can use Bluetooth for Handoff/Continuity and for Keynote Remote but the devices are not paired. More information:  Bluetooth: Why can't I pair my iPhone or iPad with my computer?

  • "Unable to establish a connection between WebEx and the mail server."

    Hi,
    I installed Cisco WebEx and integrated with our Microsoft exchange server.  It showed server "UP".  everything's came up and working fine after that and sudenlly i found this message "Unable to establish a connection with the mail server.  Please recheck settings."
    I went into the Mail Server setup to edit settings and now, it shows Server Down.  Do I need to do something on the MS Exchange 2010 or from webex server ??
    Any help is greatly appreciated.  Thanks a lot!

    Every 180 seconds, CWMS verifies the connection to the SMTP server by establishing a connection on TCP port 25 (SMTP) and then sending the EHLO command followed by the QUIT command. This check is also performed once when logging into the admin web page or when browsing to System -> Servers (where the status of the mail server is displayed).
    If  this sequence does not complete successfully, the warning “Unable to  establish a connection with the mail server. Please recheck settings.”  will show in a banner at the top of the CWMS admin pages.
    You  can verify the connection to the SMTP server manually by using “telnet  25”.
    If you have access to the CWMS unix shell be aware that CWMS does not come  with the telnet command installed.
    As an alternative, you can use this 3-lines script:
    exec 3<>/dev/tcp/x.x.x.x/25
    echo -e "EHLO\r\nQUIT\r\n " >&3
    cat <&3
    Replace x.x.x.x by the ip address or hostname of the SMTP server and save the script in a file, f.e.:
    /* script saved in a file named ehlo */
    [root@dchriste-cwms-adm1 ~]# cat ./ehlo
    exec 3<>/dev/tcp/10.48.54.79/25
    echo -e "EHLO\r\nQUIT\r\n " >&3
    cat <&3
    Then, execute it:
    [root@dchriste-cwms-adm1 ~]# sh ./ehlo
    The output should be similar to this:
    220 *******************************************************************************************************************
    250-confukdc.confuk.com Hello [10.48.52.110]
    250-TURN
    250-SIZE
    250-ETRN
    250-PIPELINING
    250-DSN
    250-ENHANCEDSTATUSCODES
    250-8bitmime
    250-BINARYMIME
    250-CHUNKING
    250-VRFY
    250-XXXXXXXXXXXXXXXXXXXXXXXA
    250-X-EXPS=LOGIN
    250-AUTH GSSAPI NTLM LOGIN
    250-AUTH=LOGIN
    250-X-LINK2STATE
    250-XEXCH50
    250 OK221 2.0.0 confukdc.confuk.com Service closing transmission channel
    Also, you can use this tcpdump command to see the conversation (replace x.x.x.x by the SMTP server’s IP address or hostname):
    tcpdump -vXs 0 host x.x.x.x and tcp port 25
    If you have HA, it is not certain which admin VM talks to the smtp server, so best to check both.
    If you don't have access to the CWMS unix shell, best to span the switch ports and run packet capture.

  • HT4437 I just bought an Apple TV.  I fail to establish a connection between Apple TV and my Mac Book Pro. The first time I tried Mac Book had Leopard as an operating system.  I could at least see the Apple TV Screen. I updated my OS to Lion but now no coo

    I have problems pairing my Apple TV with my Mac and Iphone 4s. There was some connection between MAC and the App.TV when my operating system was LEOPARD.  I now have OS Lion and there is no connection.  I also could not find the AirPlay icon on the my Iphone.  What do I do?  Any recommendations?

    Hi shldr2thewheel,
         it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
    Sincerely in need of help once again,
    Kim

  • Difference between oracle Developer suit and Oracle Application Server???

    Dear all,,
    If any one please tell me the main difference between Developer Suit and Oracle Application Server.
    I will be very thank ful.
    Thank you
    Hina.

    Hi Hina
    can i deploy my application build on oracle 10g using developer suite with db10g and I don't use application server?For individual use and development yes u can using oracle Developer suit after starting OC4J
    but for client use for more than x user to be able to run reports using parameter forms and other forms application u must use Oracle Application Server
    An application server is
    a server program in a computer in a distributed network that provides the business logic for an application program.
    The application server is frequently viewed as part of a three-tier application, consisting of a graphical user interface (GUI) server, an application (business logic) server, and a database and transaction server.
    More descriptively, it can be viewed as dividing an application into:
    --- A first-tier, front-end, Web browser-based---
    1.graphical user interface, usually at a personal computer or workstation
    2.A middle-tier business logic application or set of applications, possibly on a local area network or intranet server
    3.A third-tier, back-end, database and transaction server, sometimes on a mainframe or large server
    Hope this helps,
    Regards,
    Amatu Allah

  • APO/BW: Verifying/Establishing a connection between BW and APO

    Hi
    1. Is there a way to see that my BW system is connected to an APO system, other than finding a name with “APO” in it under the Source System tree in BW?
    2. Also, if the connection does NOT exist between BW and APO, can you provide me with the steps on how do I establish such a connection?
    3. Does a successful  in “Generate Export DataSource” in BW indicate that my BW system is connected to APO DP?
    Thanks

    . Is there a way to see that my BW system is connected to an APO system, other than finding a name with “APO” in it under the Source System tree in BW?
    In source system tree, you will find all the systems that are connected to your BW system. The system name need not have to start with APO.
    2. Also, if the connection does NOT exist between BW and APO, can you provide me with the steps on how do I establish such a connection?
    Transaction Sm59. you need to know the source and destination IP adresses. Usually, the baais will take care of connections.
    3. Does a successful in “Generate Export DataSource” in BW indicate that my BW system is connected to APO DP?
    NO. Export generaion is within BW system; nothing to do with the APO system that is connected.
    Ravi Thothadri

  • Establishing a connection between SAP SRM and MM

    Dear All,
    I am working  for a multi-national company  and now we are thinking to implement SAP SRM  but I have some questions about  communication between SAP MM and SRM. Firstly I want  so share with you our as-is status and then my doubts and question that I have.
    In our case we have two different locationed organizations which are using different version of SAP system and SAP MM. In this  two sap system mostly codes are  and descriptions are different for  all materials and  now we want  gather all data and we want to have  one global code system and (local code also will remain). I mean we want  to call same materials with one global unique code instead of two different codes. We  are thinking to implement  something like coding center that will take local master data from local organization then will assign global code, update table then  with somehow will update SAP SRM.
    For example:
    We have local  master data on R/3 is maintained manually by local user and net item is created locally each country by local user.Coding center will be aware of new creation by mail, automatically. Coding center will update table (adding a new row for each new item) on translator (tool for assigning global code for materials) assign to each new item a global code and category and in this way SRM will be updated automatically based on translator.
    I am thinking to develeop a tool (excel,access… etc.) that will take new item creation manually or auto from local organization  then will assign a global code and category then will update SAP SRM automatically
    Regarding to  tool I have some questions:
    1)     which are the standard communication channel between R/3 and SRM or How  they can speak with each other ?
    2)     Is there any standart batch file (BI or BAPI)  to be able to perform this.Is it possible to develop tool using excel or access …etc. which will manage coding task.
    3)     When we are trasferring for the first time Master Data from MM to SRM is there any standard transaction?
    4)     how the two MD are aligned (i.e. what if a new item is created or modified on MM)?
    5)     standard program (transaction) for aligning  available ?
    6)     ) how this process can be triggered (scheduled using SAP scheduler, event or user driven)
    7)     Where the translator  (tool) should be (R/3 local, SRM, BW, other) --> Enrichment table
    8)     How we can build the communication transaction?
    Thank you very much
    Any comments and answers will appreciated and rewarded
    Regards,

    Hi,
    Have you considered using CCM. You generally use an industry standard code (perhaps UNSPSC) in CCM as your vendors would all have different number (similar to your scenario). CCM is a plug-in to SRM, supplied by SAP.
    The authoring tool is where you can enrich your catalogue, and have approval dependant on rules that you setup. In your case you would possibly have a catalogue per locationed organisation (or R/3 system). These would then be mapped to a master catalogue, and assigned to users as views. This tool is a BSP on SRM. You could also upload these catalogues from Excel (as a CSV) or through XI as XML. We use the automatic transfer of materials from R3 and then there is a report in SRM to feed that through to the catalogue.
    The only thing that needs to be thought through is how you feed the selected catalogue item back to the differing R3 systems, but this shouldn't be a stumbling point.
    Cheers
    Rob

Maybe you are looking for