Problem to modify the field "location" in an AP on WCS

Hello everybody,
I have a problem to modify the field "location" in an access point on WCS.
In fact, when i try to modify this field and then apply the modification, i have this error message :
"Error(s): You must correct the following error(s) before proceeding:
Error:Global Username and Password are not configured on the associated controller. Please configure username and password on the associated controller before disabling 'Override Global Username Password'."
I made the modification on Chrome and Firefox but I always have the error message.
Nevertheless, i don't have this error message with other access points and other access points are configured without the option "Override Global Username Password".
I'm obliged to make the modification directly in the controller and not in WCS.
The problem is that i want to make the modification directly in WCS.
Could you help me please ?
Thank you in advance.

When i make the modification directly in WCS, i have no problem, it syncs good.
The version of WCS is 7.0.230.0.
The version of the controller is 7.0.240.0 and the field recovery image version is 7.0.112.21.
Version
7.0.230.0
Version
7.0.230.0
Version
7.0.230.0

Similar Messages

Modify the Field Type of standard Table fields in a Query

Hello. I have a question.
Is there a way to "modify" the field type for standard table fields that are included in a Query?
I made a simple query out of a join of tables, but several fields have a lot of decimals, and I would like to present them in the query without any decimals, just as a regular "N" field.
I tried the possibility of creating extra local fields where all I do is transfer the value to the new "N" field, but I have many fields like this, so if there's a better way; I'd prefer that.
Maybe somewhere in the InfoSet there's a way to modify the type of the standard table fields?
Thank you.

Hi,
This document may help you out.
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/d2/cb4468455611d189710000e8322d00/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/d2/cb4468455611d189710000e8322d00/frameset.htm]
Cheers,

Modify the field TXJCD_ST of RFC_CALCULATE_TAXES_DOC

HI,
I have a requirements to modify the field TXJCD_ST of RFC_CALCULATE_TAXES_DOC with the ShipTo jurisdiction code.
What i found is the user exit exit_saplfytx_user_001 that sends to the RFC a list of fields that are modified. The field TXJCD_ST is not in the list of the user exit.
At this point i don't know how to do it , meaning pass the modified value of the TXJCD_ST to the RFC_CALCULATE_TAXES_DOC.
Does anyone know how to?
Regards, Oli

No, I did not see this particular scenario yet. If the Taxware guys say they can not configure their side like that, then this won't work. I just thought they could be able to do this because they can configure the structure of the USER_DATA field on their end. It is entirely possible that those fields that are explicitely part of the interface can not be added to USER_DATA.
You can still try my first suggestion
I wonder if that'll work. Theoretically it should since by looking at the related code and backtracking the calls, it looks like MOVE-CORRESPONDING statements are used - so having the TXJCD_ST as part of the allowed fields might just work OK.

How to modify the field lengh of file upload

Hi All,
   I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
          EXPORTING
            Id      = ls_form_save-id
          RECEIVING
            Element = lv_fileup.
        bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.A

Hi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy

I HAVE ENCOUNTERED A PROBLEM IN MODIFYING THE DEPARTMENTS REPORT

I am a new learner database developer. I am now using Oracle 11g. Following the Developer tutorial on MODIFYING THE DEPARTMENTS REPORT I have encountered the following problem.
Scroll down to Source, and replace the default Region Source script with the
following:
SELECT d.DEPARTMENT_ID,
d.DEPARTMENT_NAME,
(select count(*)from oehr_employees where department_id = d.department_id)
"Number of Employees",
substr(e.first_name,1,1)||'.'||e.last_name "Manager Name",
c.COUNTRY_NAME "Location"
FROM OEHR_DEPARTMENTS d,
OEHR_EMPLOYEES e,
OEHR_LOCATIONS l,
OEHR_COUNTRIES c
WHERE d.LOCATION_ID=l.LOCATION_ID
AND l.COUNTRY_ID=c.COUNTRY_ID
AND d.DEPARTMENT_ID=e.department_id
AND d.manager_id=e.employee_id
AND instr(upper(d.department_name),upper(nvl(:P2_REPORT_
SEARCH,d.department_name)))>0
6. Click Apply Changes.
7. Click Apply Changes to confirm.
8. Right-click Departments and select Edit Report Attributes.
9. Click the Edit icon next to Number of Employees.
10. Under Column Definition, select center for Column Alignment.
11. Click Apply Changes.
When I did it there was an error message as follows:
ErrorRegion Source
Query cannot be parsed, please check the syntax of your query. (ORA-00909: invalid number of arguments)+
Unable to show report.
Below is the syntax that was to be replaced:
select
"DEPARTMENT_ID",
"DEPARTMENT_NAME",
"MANAGER_ID",
"LOCATION_ID"
from "OEHR_DEPARTMENTS"
Now; how should I correct it? I cannot move forward
Regards
DAVID GODIS-TEI
Ghana

In your post, the bind variable :P2_REPORT_SEARCH has a carriage return before the word SEARCH. Make sure this is not the case in the report.

Problem in modifying the main internal table gt_data

Hello i have written code for modifying the main internal table. i have read data from ausp table and put into the internal table gt_ausp. now i want to modify my main table GT-DATA with gt_ausp. i am not able to do this.
LOOP AT gt_data INTO ls_list.
    lt_temp-objek = ls_list-matnr.
    APPEND lt_temp.                  " 특성값 발췌용도로 저장
    APPEND ls_list TO lt_work.      " 핵심작업용도로 저장
ENDLOOP.
DESCRIBE TABLE lt_temp.
IF sy-tfill EQ 0.
    pv_flg = 'X'.
    EXIT.
ENDIF.
Get 제품인증(플랜트별).....
DESCRIBE TABLE lt_cetino_tp.
        플랜트          자재번호
        카타로그-인증   코드그룹-인증   인증코드
        Certi. No.
Get 자재별 특성값..........
          오브젝트 특성이름 내부특성   내부카운터 특성값
SELECT    aobjek    batnam   aatinn    aatzhl    a~atwrt
        INTO CORRESPONDING FIELDS OF TABLE lt_ausp_tp
        FROM ausp AS a INNER JOIN cabn AS b
          ON aatinn = batinn
         FOR ALL ENTRIES IN lt_temp
       WHERE a~objek EQ lt_temp-objek   " 오브젝트키(자재번호)
         AND a~klart EQ '001'           " 클래스유형
       AND a~atzhl EQ '001'           " 특성값카운터(최종건만 존재)
                                          자재특성 변경시 변경됨
         AND b~adzhl EQ '0000'.
IF sy-subrc EQ 0.
    DELETE ADJACENT DUPLICATES FROM lt_ausp_tp.
    lt_ausp[]     = lt_ausp_tp[].
    lt_ausp_tp2[] = lt_ausp_tp[].
    DELETE ADJACENT DUPLICATES FROM lt_ausp_tp2.
Get 특성내역
          내부특성   " 내부카운터
          특성값       특성값내역
    SELECT    aatinn " aatzhl
              aatwrt    batwtb
          INTO CORRESPONDING FIELDS OF TABLE lt_cawn
          FROM cawn AS a INNER JOIN cawnt AS b
            ON aatinn = batinn AND
               aatzhl = batzhl AND
               aadzhl = badzhl
           FOR ALL ENTRIES IN lt_ausp_tp2
         WHERE a~atinn EQ lt_ausp_tp2-atinn " 내부특성
           AND b~spras EQ sy-langu.
ENDIF.
SORT lt_work BY matnr .
BREAK-POINT.
LOOP AT lt_work INTO ls_list.
특성내역
    READ TABLE lt_ausp WITH TABLE KEY objek = ls_list-matnr
                                         atnam = 'SECTION_WIDTH'.
수출자재가 아닌 것은 제외
LS_LIST-SECTION_WIDTH = LT_AUSP-ATWRT.
MODIFY TABLE GT_DATA FROM LS_LIST TRANSPORTING SECTION_WIDTH.

Hi,
Question before: why dont you just use the std.API for reading the classification data?
e.g. "BAPI_OBJCL_GETDETAIL"
Second: a DELETE DELETE ADJACENT DUPLICATES works only only sorted tables.
Doing this after a select will only succeed randomly depending on the buffers of your data based below.
( 90% chance if it is an oracle system)
To your question:
Just replace your LOOP AT gt_data into ls_list
by a LOOP AT gt_data ASSIGNING <current_list_record>.
then you can access the fields directly:
<current_list_record>-SECTION_WIDTH = LT_AUSP-ATWRT.
Cause of your issue:
"MODIFY" needs a key to to find the record to be updated.
If your gt_data ist referencing a DDIC table type with a key or a local type with a key
it has no chance to do it.
Hope that helps.
br,

Problem while assigning the fields of EBM to ABM in Provider

Hi All,
I am facing a problem with the fields of EBM not being able to Assign to ABM in ProviderBPEL
In RequestorABCSImpl, i am transforming a ABM to SupplierPartyEBM(CreateSupplierPartyListEBM is the type i am using)
Field called 'PayementTerm' is being mapped as below
<corecom:PaymentTerm>
<corecom:Code>
<xsl:value-of select='dvm:lookupValue(concat("oramds:/apps/AIAMetaData/dvm/","SY_SUPPLIERPARTY_TERMTYPE",".dvm"),"MULTISYS_01",tnsaboabo:PaymentTerm/text(),"COMMON",aia:getServiceProperty($ServiceName,"SyncSupplierPartyList.PaymentTerm.Code",false()))'/>
</corecom:Code>
</corecom:PaymentTerm>
after transform I am able to see the value for PaymentTerm/Code while testing requestor.
Now in provider I am using an Assign activity to assign 'PaymentTerm/Code' to ABM field called 'termID '
Here
'PaymentTerm/Code' is a TermType
'termID ' is a string.
When i test end to end
i am getting an error while assigning 'PaymentTerm/Code' to 'termID'
Error i am getting is "Error in evaluate<from expression at line 677. the result is empty for xpath expression inputvariable/./../PaymentTerm/Code
Please guide me what is wrong in this. In Input Payload i am able to see the value coming in provider but while assigning i'ts failing

This is the input xml
<CreateSupplierPartyListReqMsg><part name="CreateSupplierPartyListEBM" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><CreateSupplierPartyListEBM xmlns="http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1" xmlns:wsa="http://www.w3.org/2005/08/addressing">
<EBMHeader xmlns:fpsdataabo="http://xmlns.cassini.telenor.com/FPS/SupplierParty/V1" xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2" xmlns="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:EBMID>2d323432363737383037393633373932</corecom:EBMID><corecom:EBMName>{http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1}CreateSupplierPartyListEBM</corecom:EBMName><corecom:EBOName>{http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1}SupplierPartyEBO</corecom:EBOName><corecom:CreationDateTime>2012-12-07T08:51:15.135+01:00</corecom:CreationDateTime><corecom:VerbCode>Create</corecom:VerbCode><corecom:MessageProcessingInstruction><corecom:EnvironmentCode>PRODUCTION</corecom:EnvironmentCode></corecom:MessageProcessingInstruction><corecom:Sender xmlns="http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1" xmlns:ebo="http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1" xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions" xmlns:hashmap="http://www.oracle.com/XSL/Transform/java/java.util.HashMap"><corecom:ID>MULTISYS_01</corecom:ID><corecom:CallingServiceName>{http://xmlns.oracle.com/ABCSImpl/Multisys/Core/SyncSupplierPartyListMultisysReqABCSImpl/V1.0}SyncSupplierPartyListMultisysReqABCSImpl</corecom:CallingServiceName><corecom:Custom xmlns:xacml="urn:oasis:names:tc:xacml:2.0:context:schema:cd:04" xmlns:tnsaboabo="http://xmlns.cassini.telenor.com/Multisys/SupplierParty/V1"><corecom:LegalEntityReference><corecom:LegalEntityIdentification><corecom:ID/></corecom:LegalEntityIdentification></corecom:LegalEntityReference></corecom:Custom></corecom:Sender><corecom:Target><corecom:ID>EBIZ_01</corecom:ID></corecom:Target><corecom:BusinessScope><corecom:ID>Supplier Party - 0000001</corecom:ID><corecom:InstanceID>CreateSupplierPartyList/32313433363838393939393637303532</corecom:InstanceID><corecom:BusinessScopeTypeCode>BusinessProcess</corecom:BusinessScopeTypeCode><corecom:EnterpriseServiceName>{http://xmlns.oracle.com/EnterpriseServices/Core/SupplierParty/V1}SupplierPartyEBSV1</corecom:EnterpriseServiceName><corecom:EnterpriseServiceOperationName>CreateSupplierPartyList</corecom:EnterpriseServiceOperationName></corecom:BusinessScope><corecom:BusinessScope><corecom:ID>CreateSupplierPartyListReqMsg</corecom:ID><corecom:InstanceID>CreateSupplierPartyListReqMsg/2d323432363737383037393633373932</corecom:InstanceID><corecom:BusinessScopeTypeCode>Message</corecom:BusinessScopeTypeCode><corecom:EnterpriseServiceName>{http://xmlns.oracle.com/EnterpriseServices/Core/SupplierParty/V1}SupplierPartyEBSV1</corecom:EnterpriseServiceName><corecom:EnterpriseServiceOperationName>CreateSupplierPartyList</corecom:EnterpriseServiceOperationName></corecom:BusinessScope><corecom:EBMTracking><corecom:SequenceNumber>1</corecom:SequenceNumber><corecom:ExecutionUnitID/><corecom:ExecutionUnitName>{http://xmlns.oracle.com/EnterpriseFlows/Core/SyncSupplierPartyListEBF/V1}SyncSupplierPartyListEBFV1</corecom:ExecutionUnitName><corecom:ImplementationCode>BPEL</corecom:ImplementationCode><corecom:ActivityDateTime>2012-12-07T08:51:15.136+01:00</corecom:ActivityDateTime></corecom:EBMTracking><xacml:Request xmlns:xacml="urn:oasis:names:tc:xacml:2.0:context:schema:cd:04"/></EBMHeader>
<DataArea><corecom:Create xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"/><ebo:SyncSupplierPartyList xmlns:ebo="http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1"><corecom:Identification xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:ID schemeID="SY_SUPPLIERPARTY_SUPPLIERPARTYID" schemeAgencyID="XREF">33363339373538363835333734303432</corecom:ID><corecom:ContextID>c</corecom:ContextID><corecom:ApplicationObjectKey><corecom:ID schemeID="VENDOR_NUMBER" schemeAgencyID="MULTISYS">0000001</corecom:ID></corecom:ApplicationObjectKey></corecom:Identification><corecom:PartyLocation xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:Identification><corecom:ApplicationObjectKey><corecom:ID>0000001</corecom:ID></corecom:ApplicationObjectKey></corecom:Identification><corecom:LocationReference><corecom:Address><corecom:LineOne>Hillev?gsv 24</corecom:LineOne><corecom:LineTwo>Hillev?gsv 24</corecom:LineTwo><corecom:LineThree>Hillev?gsv 24</corecom:LineThree><corecom:LineFour>Hillev?gsv 24</corecom:LineFour><corecom:CityName>STAVANGER</corecom:CityName><corecom:PostalCode>4016</corecom:PostalCode></corecom:Address></corecom:LocationReference></corecom:PartyLocation><corecom:PartyContact xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:Contact><corecom:PersonName><corecom:FirstName>Nordialog Stavanger</corecom:FirstName></corecom:PersonName></corecom:Contact></corecom:PartyContact><corecom:Organization xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:Name>Nordialog Stavanger</corecom:Name><corecom:LegalStructureCode>00</corecom:LegalStructureCode><corecom:OrganizationFinancialProfile><corecom:FinancialProfile><corecom:FinancialAccount><corecom:AccountNumber>54130613600</corecom:AccountNumber><corecom:TypeCode>SUPPLIER</corecom:TypeCode><corecom:CurrencyCode>NOK</corecom:CurrencyCode></corecom:FinancialAccount></corecom:FinancialProfile></corecom:OrganizationFinancialProfile></corecom:Organization><ebo:CustomerNumber>0000001</ebo:CustomerNumber><ebo:MinimumOrderAmount>0</ebo:MinimumOrderAmount><ebo:TypeCode>VENDOR</ebo:TypeCode><ebo:OneTimeIndicator>false</ebo:OneTimeIndicator><ebo:SupplierPartyTradingLocationProfile><corecom:Identification xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:ID schemeID="SY_SUPPLIERPARTY_SUPPLIERPARTYTRADINGLOCATIONPROFILEID" schemeAgencyID="XREF">2d323735363933313339333732353537</corecom:ID><corecom:ApplicationObjectKey><corecom:ID schemeID="VENDOR_NUMBER" schemeAgencyID="MULTISYS">0000001</corecom:ID></corecom:ApplicationObjectKey></corecom:Identification><ebo:PrimaryIndicator>true</ebo:PrimaryIndicator><ebo:FreightTermsCode/><ebo:HoldReasonCode/><ebo:InvoiceCurrencyCode/><ebo:PaymentCurrencyCode/><ebo:PaymentPriorityCode>99</ebo:PaymentPriorityCode><ebo:TermsDateBasisCode/><ebo:VATTaxCode>SY25VAT</ebo:VATTaxCode><ebo:VATRegistrationNumber/><ebo:ExcludeFreightFromDiscountIndicator>false</ebo:ExcludeFreightFromDiscountIndicator><ebo:PurchasingEnabledIndicator>false</ebo:PurchasingEnabledIndicator><ebo:RFQOnlyIndicator>false</ebo:RFQOnlyIndicator><corecom:PaymentTerm xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:Code>6 DAYS</corecom:Code></corecom:PaymentTerm><ebo:TradingLocationProfileAddress><corecom:Address xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:LineOne>Hillev?gsv 24</corecom:LineOne><corecom:LineTwo>Hillev?gsv 24</corecom:LineTwo><corecom:CityName>STAVANGER</corecom:CityName><corecom:PostalCode>4016</corecom:PostalCode></corecom:Address></ebo:TradingLocationProfileAddress></ebo:SupplierPartyTradingLocationProfile></ebo:SyncSupplierPartyList></DataArea>
</CreateSupplierPartyListEBM></part></CreateSupplierPartyListReqMsg>
And my assign is
bpws:getVariableData('CreateSupplierPartyListReqMsg','CreateSupplierPartyListEBM','/WL5G3N2ebo:CreateSupplierPartyListEBM/WL5G3N2ebo:DataArea/WL5G3N2ebo:CreateSupplierPartyList/WL5G3N2ebo:SupplierPartyTradingLocationProfile/corecom:PaymentTerm/corecom:Code') to an 'invoke_InputVariable/termid'

DSP filter problem in modifying the Oscilloscope

The hardware and software I am using are:
LabVIEW: 5.1.1
DAQ device: PCI-MIO-16XE-50
VI programs: 2 Channel Oscilloscope(sample VI)
I want to modify the function of the sample VI of 2 Channel Oscilloscope to simulate the AC-GND-DC function of Real Oscilloscope.
I try it by using "Butterworth Filter" under
Function-->Signal Processing-->Filters to cut the frequency at 0Hz for "AC" function (cut all DC).
However, the output is not good as real Oscilloscope becasue the signal seen is not good and stable.
I even use order 10 filter to do it. But the result is also the same.
Any suggestions to my problem?

The ac-coupling of an oscilloscope is not a filter a "0" Hz. It is normally just a simple capacitance that, with the 1MOhm input impedance of the oscilloscope, acts like a first order high-pass filter with a cut-off frequency of few hertz.
Try to implement a highpass Butterworth filter of order 1 and with a low cut-off frequency of 10 Hz.
You can then play with the cut-off frequency and see which value works best for you (remember to connect the right value to the sample frequency input of your filter). You can also try to increase the filter order to 2 (some measurement devices have input high-pass filters of order 2 or even 3).

Modify the field value in itab1 using itab2

Hi experts
I need some help.
My question is : I have ITAB1 contains IBLNO field it is a legacy value.
I want to modify this field.
Another internal table ITAB2 contains sap, legacy value of IBLNO(Cross refrenced table).my requirement is IBLNO of ITAB1 is modified with corresponding sap IBLNO in ITAB2.
plz help
Durga Parsad

Hi Durga,
You want to get following results -
1. You have ITAB1 containing IBLNO.
2. ITAB2 has IBLNO.
3. Modify ITAB1-IBLNO from ITAB2-IBLNO.
4. There must be some common value between the two tables. It has to be there otherwise the two records won't match.
Kindly find the following code for doing so -
LOOP AT ITAB2 INTO WA_ITAB2.
* Modify ITAB1 from workarea of ITAB2 for matching records
MODIFY ITAB1 FROM WA_ITAB2
    TRANSPORTING IBLNO                " Modify only IBLNO of ITAB1 for matching records
    WHERE FIELD1 = WA_ITAB2-FIELD1.   " Some common field between the ITAB1 & workarea of ITAB2
CLEAR WA_ITAB2.
ENDLOOP.
Hope this helps.
PS If the answer solves your query, plz close the thread by rewarding each reply and marking it Solved.
Regards

Problem with modifying the default design print layout

hello to everybody
i would like to ask you something about the design print layout.
i actually have made a draft payment by using the payment wizard. i have already saved it and by clicking the print layout some of the columns do not appear the the data in there.
to be more specific...i used the default print out generated by the system and modified it by adding some more columns such as name o business customer and bank account.
before adding the above fields, the print out was excellent(the default one generated by the system)
by adding the above fields, some of the columns such as code of bp and name of bp do not appear in the prinout layout except of the last records which is desplayed as it is.
i have to mention that by removing the field bank account(i have mentioned it as database) alla the records of the payment wizard appears as is but by adding the bank account column, only the last record appears to be with data
thanks in advance!

how is it possible to edit the system pld and to display the desired data only for the laast record?it is strange!
i have 5 payments to do. by checking the system 's PLD the data are fine. by adding my own fields(bank account) the row of the first 4 records do not appear at all(they are empty) except of the last one which is appeard with the desired information

Modify the field u00AB Account u00BB in FB03 Transaction (ECC6)

Hello,
I have to modify the value of the field u201CAccountu201D in the general screen and in the item screen of the transaction FB03. (to put inside the alternative account)
I have tested all the user exit of the transaction but none is useful.
Then, u201CI_AUTHORITY_ITEMu201D is the only one BADI for the transaction, but it occurs too early in the program to change data.
Ie, with it I can change the field in the intern table (SAPLF064)XBSEG but this field is replaced with another value later in the process. And I canu2019t change this other value because of checks on it in the program.
Have you got any suggestion before I run the specific solution of the ZFB03 ?
Regards.

Alfred
Check BADI "ACC_DOCUMENT", it is filter dependent, so set the appropriate filter once you create the Implementation...
Thanks
Amol Lohade

I can't modify the field MARC-LOSGR using the badi BADI_MATERIAL_REF

Hello!
I have to force a value in the field "lot size" (MARC-LOSGR) when the system extends automatically a material with the transaction CK40N.
I tried to use the badi BADI_MATERIAL_REF, wich seems to be perfect for this purpose, but it doesn't work: after the badi the system resets the field to its initial value.
What can I do?
Thank you

Dear Sauro
I've found this thread in the forum, and because I've the same problem (I need to set 1000 as default for marc-losgr) during creation/extension of a material, I'd like know how you solved your issue.
The BADI is called during CK11N and CK40N transaction, but even if I set the value in the right mode it's not saved on table MARC. Of course If I create manually the cost view by using MM01 the BADI works fine and the value is saved.
Thank-you in advance for cooperation.
Claudio
Ps: se vuoi puoi anche rispondere direttamente in italiano al mio indirizzo che trovi nei miei riferimenti. Grazie

Problem in Modifying the records

Hi all,
I have a button "Find", when the button is Pressed, I've to query the records and modify the records. I have to modify only the "Reading" Column in only one row.
It is querying all the records successfully (here retrieves 10 records) but when I modify the Reading value in one Row, all the 10 records are inserting as new row. Am not able to update.
Please suggest me with the solution.
Regards,
Mini

Hi Mini
Sounds Strange and i think the problem resides in ur design of code in Find Button So i suggest to Share us the Code pls.
Well ,for now u can try to use ...
IF :system.current_record THEN
END IF;Hope this helps...
Regards,
Abdetu...

FB01: "Posting with ref." slould I modify the field 'Assignment' by hand?

Hi All,
I'd like to post a document by t.code FB01 and using the function "post with reference".
When i save the new document, it takes the field 'Assignment' from the reference-document i've put in.
Should I modify it by hand before saving it?
Or ther's the way to obtain it in the right way automatically?
Thanks
Gandalf

Hi,
You need to change the required fields manually, before actually posting a document with a reference document.
More over, its better to simulate a document before saving(posting).
Regards,
Praisty

Problem in Grouping the Fields of a Report

I want to make a report in which a particular field (say A) of a table (T1) is the field on which report is to be grouped above if a field B in T1 has value 'a' then I wish to print certain other fields with the field A when value of field B has value is 'b'.
Thx in Advance

use avg(Duration% by <"Date Table"."Date Level"> in the answers column.
substitute "Date Table" with your actual time dimension table name, and "Date Level" with your actual date column that you want to group by.

Problem to modify the field "location" in an AP on WCS

Similar Messages

Maybe you are looking for