Problem to print Thai address correctly as it's overlapped

Hi All,
I tried to print Thai address (street and street2) in one line via smartform and printed in PDF preview.. The value for the fields is as below:
Street: 78 moo 1 ต.11/6
Street2: Bangtalad, Pakkred
There is a Thai character in Street. The problem is somehow Street2 is printed overlapped with Street.. But if value of Street2 is only 'Bangtalad, Pak' then it's correct to print next to Street.. I've extend the width, but still unsuccessful..
Anyone knows how to rectify this error?
Juli.

In regards to the other question I asked though, is it possible to scale all the items on a page by a set amount? Say for instance I have the font too large on all of the pages in the document and the images are also a little oversized, is ther some way I can scale all of the images down a certain percentage without having to go into each item individually?
Well, kinda. If you select everything on your page at once (or if they're already grouped) then you can hold down Control, Shift, and Alt while grabbing a corner to resize and it'll maintain all of the ratios, including scaling the font size. You'd only be able to scale one page or spread at a time, but you could do it that way. Alternately, you can place your InDesign document into another InDesign document, where the source InDesign doc will be displayed as an image in the target doc. So, you could scale each page just like an image.
However, I'm reluctant to advise that you do that - mostly because I don't understand what you're doing. In my understanding, everything outside of the crop marks is literally going to wiind up on the cutting room floor, so the fact that you have content like page numbers in your bleed makes no sense to me. Is it intended for the press operator who's going to be doing the cutting? We can answer your questions, but honestly I think you should describe what you're trying to achieve in the end with a bit more detail, otherwise the forums regulars will answer your questions at face value and maybe help you, or maybe just help you dig a deeper hole for yourself without realizing it.

Similar Messages

Problem when printing Thai Characters in Smartform

Hi All,
When printing thai characters in smartform it takes more spaces between characters than required. I tried all possible font to adjust the character spacing.
Can anyone help me out.
Thanks,
Khushboo Dand

Dear Khushboo, Jag
I have observed that tThe tiny boxes that are appearing in the Smartform text element is only occuring when you are printing a variable whose content is thai and nothing else with that. by nothing else i mean no THAI hardcoded text.
if you try and check you will observe that when you try to print something like this in your Text element
with your paragraph format alright/ output device and device type everythng in place
eg:
ของผู้มีเงินได้ &G_VAR& -
is printing alright : content of G_VAR is thai characters
but if you are printing just the variable
eg:
&G_VAR& --- it will print boxes
to overcome this after trying no.of checks / online helps / settings etc etc which , ofcourse, did not help
I did a lil bit trick with the system
You can create a character format in your smartstyle with FONT : THANGSAN and maintain the COLOR as white
now go to your text element key in a THAI character at the start or end of you variable and assign your new character format to that character. and Eureka! it will work
eg: <CF> ข </> &G_VAR& - --- seen in your change editor
where CF is the new "colorless" character format I have asked you to create.
Thanks and Regards,
Charu.
Edited by: Charu Borkar on Aug 3, 2011 00.14 am

HP C309a All in one Printer - Problems with printing documents the correct size.

Hi I recently purchased an HP 309a as a replacement for an EPSON printer which had to be replaced a couple of times so I thought I would change manufacturer.
The HP printer prints well in post places but when I print from Excel on an A4 scale it only prints 3/4 size on an A4 page. I tried everything to get it to print the correct size. I have adjusted the settings to scale to A4, print boderless etc and it just will not print correctly.
It seems to be ok in Word and many other programs so I don't know why there is an issue with Excel. Iam I missing something, please help.
Also is there any way to default the printer to A4 automatically instead of 8" x 11".

I also have issues using this printer with Excel/ Word.
When I am using Excel or Word I have to remove the HP 309a as my default printer.
when set as default, excel and word just "hang" for up to 3 minutes when opening or saving.
I called HP who said the printer works with all other files so basically it's tough. One of their tech guys tried to sort it out but couldn't.
Has anyone else had this same problem? If so, how was it resolved?
£300 for a printer that doesn't work with MS. It's not funny and I won't buy HP product again.

Desktop Address Correction slowdown--problem solved!

Just an FYI to any users who have encountered an incredible slow-down in Address Correction processing (we use Desktop, but may apply to any Postalsoft platforms); we finally figured out what was the cause: the new Internet Explorer 8.
For some reason, when we updated to IE8, it caused a conflict with CASS processing. Re-install IE7, delete IE8, and you should be back to normal processing speed. Hope this helps!

Tony and Dawn,
I haven't heard of any issues with the latest version of DeskTop or Business Edition other than the IE8 thing which we've seen cause several issues. Even just reading some of the IE8 reviews don't seem very favorable and most that I've read say not to install IE8 until all the bugs have been worked out.
At any rate there was a change in DeskTop and Business Edition 8.00c on how the memory is looked at. In prior versions we only looked at physical memory which was incorrect. At this point the software will warn you if you don't have enough memory to load if you have the option turned on "stop assigning if out of memory". This is a good indicator that you don't have enough contiguous memory. This is not to say that you don't have enough memory on your machine but you could have other applications running that are using up portions of your ram.
DeskTop and Business Edition require one whole chunk to be able to fully load the directories. You may get the warning that you don't have enough memory but some of the DPV dirs may still load and it will still process at a decent speed. If you have plenty of memory, don't have IE8, and still having issues you may want to look on your machine to see if there may be another cause. Alot of times I see programs running at startup or in the background using up memory when not needed. If you are not sure how to check this you may want to have your IT or a local computer tech take a look at your machine.
Just another side note... there is an enhancement request to change the way we utilize the memory so we can take bits and pieces and not need a full contiguous chunk of ram. Also we do occasionally see where the directories don't clear out of the memory as I think Dawn had noticed. Closing the software or rebooting the machine will resolve this.
For futher info see Knowledge Base notes:
1188664 - Address Correction speed is not as fast as it should be on Windows XP - Business Edition/DeskTop Mailer
1191860 - How to speed up Address Correction with DPV, LACSLink, and SuiteLink processing turned on - Business Edition/DeskTop Mailer
1302299 - Address Correction is running slow - Business Edition
1344497 - Error report! Err no - 7050, DPV ERROR. Insufficient memory to cache DPV directories - Business Edition/DeskTop Mailer
Hope this helps!
Thanks,
Kendra

LaserJet M1120n MFP - Problems with printing over Wireless Network.

Hi. I have recently purchased a HP M1120n MFP printer. There are three wireless laptops (Vista, & XP Pro) that use this printer via a DrayTek Vigor 27000GE wireless router, then via cat 5 cable to Ethernet on printer.
All three laptops can print, but sometimes the print queue backs ups. The top print job will say "Printing" but it can say this for hours! Then if I delete the print job, it will say "Deleting" - but nothing happens. The only way to clear it is to reboot the laptop.
Firmware datecode is 20080228.
If I connect via USB cable directly to the printer it works correctly.
Any ideas to help resolve this frustrating problem?

The bottomline is that this printer has no way of connecting other than a straight USB connection. In order to make it wireless you have to have a device that will give it an network IP address. The printer by itself can not do this.
The only way to get this printer on a network is to buy a SEPERATE USB Printer Server. Or, buy a separate router, like I said, that has a USB connection on the back that will support printers.
You can not connect it the way you want as it stands right now.
However, call your ISP and have them set it up IF their Gateway device has a USB connection and really can support a printer. It is their issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Smartforms - printing Russian address not working

Hi All,
In my smart form I am printing an address that is maintained in russian langauge. But instead it is giving some special characters when i am clicking the print option(ie in my local printer) but when i am checking in print preview the texts are coming proper(using the same output device).
For eg российскими лесными is printed as @>AA89A:8<8;5A=k<8.
Can someone please guide me how to solve this problem.
Thanks & Regards,
Vivek Agarwal
Edited by: Julius Bussche on Feb 3, 2009 11:39 AM
Please use the correct forum and appropriate subject titles

Hi Vivek,
I had the exact same problem as you did. For me, then, the Basis guys did it but since then I investigated it for myself. The problem is that russian characters are contained on a different code page than the usual Western European characters. This is why you will need to specify in transaction SPAD a different output type for the printer. An output type that supports Cyrillic characters will do the job. You can see in the description if it support cyrillic.
Best regards,
George

Facing a problem about printer sofware

Hi all,
i was new to OS X, just receive my imac today, and install everything i need, just left the last part, is printer software.
it was a ip printer, after i key in the printer ip address, its said "unable to connect" i have downloaded the most updated software and install.
its still the same problem came out. please advise !
printer model : Aficio™MP C2500 (support Mac OS X 10.10 (OS X Yosemite))
download link: http://www.ricoh-ap.com/downloads/GetDriver.aspx?CID=1&pn=Aficio%u2122MP%20C2500 &path=http://support.ricoh.com/bb/html/dr_ut_e/ra/model/mpc25/mpc25en.htm

Is the IP address a static address? To verify you are using the correct IP address, print a configuration page from the printer.
Press the User Tools/Counter button
On the touch screen, select Printer Features
Select Configuration Page
User, adfernandes reported in an old forum thread that the protocol "JetDirect - Socket" worked. So, you might that. Others in that thread wrote that LPD worked.
Did you reboot your computer after installing the printer software? Also, try launching Disk Utilities (in the Utilities folder). In the left pane, click once on the name of the hard disk. In the right pane, click the First Aid tab and below the blank window, click the button "Repair Disk Permissions." Let it run and it will probably report some items that it fixed. Now, try adding the printer again.

When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto. All other print requests show the normal pinter menu. How do get the normal menu?

When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto. All other print requests show the normal pinter menu. How do get the normal print menu?

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

SapScript Data is not printing in Address window

Hi all,
    I am having a problem regarding printing some values in a window of sapscript.It prints data in that window for some input and not for others input. The structure , which is being passed to this window is having values in print program all the cases. I get into the sapscript in debugging mode and found that the structure is having values fr all the test run ..But its still not printing in some cases.The window is coming as blank.
the code in the editor of the window is :
POSITION WINDOW
BOX FRAME 10 TW
AS <B>&ztfin-fld18'/'&&t_ztfin-fld18&</>
ADDRESS PARAGRAPH AD
ADDRESSNUMBER &DKADR-ADRNR&
TITLE       &DKADR-ANRED&
NAME        &DKADR-NAME1&, &DKADR-NAME2&, &DKADR-NAME3&, &DKADR-NAME4&
STREET      &DKADR-STRAS&
POBOX       &DKADR-PFACH& CODE &DKADR-PSTL2&
CITY        &DKADR-ORT01&, &DKADR-ORT02&
POSTCODE    &DKADR-PSTLZ&
COUNTRY     &DKADR-LAND1&
REGION      &DKADR-REGIO&
FROMCOUNTRY &W_CLERK_LAND&
ENDADDRESS
can sugest me something.
Reward poits guranteed.

Hi Vijay..please have look in this..
Case: text is printed in address window
DKADR-ADRNR     xxxx
DKADR-NAME1     xxxx
DKADR-STRAS     xxx
DKADR-PFACH     xxxx
DKADR-ORT01     xxx
DKADR-LAND1     xxx
DKADR-REGIO     xxx
rest are blank
Case: text is not printed in address window
DKADR-ADRNR     xxxx
DKADR-NAME1     xxxx
DKADR-NAME2     xxxx
DKADR-STRAS     xxxx
DKADR-ORT01     xx
DKADR-LAND1     xx
rest are blank
is the Addresss CALL IS failing because of DKADR-REGIO = space ?

Cannot print from Address Book! Print freezes and will not proceed.

I want to print an address list for Christmas cards. When I select the Group, select all and select Print I get the option box. I then select my printer and use the down arrow to open the dialog box that shows I am printing from Address Book and gives the different forms I can use (ie list, label, envelope) as well as the fields to include in the list. Once I have everything selected I click the Print radio button. All of the information under the Address Book options line disappears. Print remains highlighted and my printer Que never opens or appears. If I manually open the printer there is no print job showing. At this point the Address Book application is frozen. I cannot select cancel on the print dialog box (I can click it, but it does not highlight and it does not close the dialog box! In order to get out of this situation I have had to close Address Book. The quit option on the menu does work and Force Quit is unnecessary.
I actually spoke with AppleCare on this issue on Friday 05 Dec 2008. The tech I spoke with knew of no other such situations, but when I started checking on this discussion page I see a posting from REECO from clear back on 24 Sept 2008. His posting can be found at http://discussions.apple.com/message.jspa?messageID=8161605&tstart=0
The technician had me do several things. One was to pull my Caches folder out of my system Library folder. He also had me remove some Address Book preference items. The end result of these actions was a Mac Pro that would not boot! (The failure followed an Address Book crash with a "KERPROTECTIONFAILURE" and the message that some QualityMedia plugin might have created the problem!)(I could find no such plug in either on my system or via Google search!) The tech had asked me to boot to safe mode by booting while holding down the shift key untill the spinning gear appeared. The machine never progressed to a successful boot! I ended up having to use a 2nd hard drive and physically place it in internal slot 1 on my Mac Pro proceeding to reinstall Tiger! The bad news is that this did NOT solve my printing problem.
If I am attempting to print from a new install with just the Apple address card and the Owner's card in Address book the print proceeds fine. Once I import my data I am back to the same print failure.
Some diagnostic steps I have tried. I have tried USB local printers and bonjour printers. I have used Epson and Canon printers. I have tried to print to a PDF. I have tried printing from another computer (12 inch PowerBook) with identical results!
At this point I am going to call AppleCare Monday morning and see if anyone there has any more suggestions. Any suggestions this forum has will be received gratefully!

I was having the same crash or "just not print" problem as seen in other posts. I was able to fix it however, by making changes in some of the address cards I was going to print. By editing the "parent", "child", "spouse" fields which will get added to the name line of the label, I was able to get labels to print (or pdf preview) without difficulty.
I did not try and determine exactly what the problem was, but basically did a data cleanup. Since I didn't know that those fields would print, I had previously included information beyond just a name in the fields, like birthdates and such, eg. "Jimmy - 12/1/05". After either removing the fields entirely where I didn't really need them, or just cleaning them down to names only, they printed just fine. I'd considered trying to disable the feature entirely but the data cleanup was not hard for a dozen or so names.

Problem with printing in character mode

Hi
I got a genuine problem in printing continous payslips using character mode with a TALLY6050 printer.
I guess there is a problem with the page setup when i try to print via windows. using different sizes of paper (Letter, A4, A3), the printed data is shifting from one page to another but the shift is following a same trend.
i tried to put one payslip per page using page breaks, but in vain. Three payslips are being printed on one page when viewed in the print perview.
Can anyone suggest any help or tips so that i can solve this problem?
Thanks for your help
Bhavish

Thanks for your response. I went ahead and filed a Correction Action Request for your orignal issue, since I was able to reproduce the same behavior when I ran your VI. The solution of printing the front panel of a subVI displaying the same graph is a workaround for this problem. Please look at the following KnowledgeBase for more details on how to do this. Hope this helps!
How Do I Print a Single Control from the Front Panel (for example, a Graph)?

How to print the address of a smart form in different line?

hi ,
I have a smartform for payment advice. It's working properly but problem is in address window. i am using sap's given address window . City district and pincode is showing in same line i want to display it different line. initially i didnot use address window I pass all the address field to the smartform but then problem is if any field is empty it showing the blanline in output of smartform then i use address window. how can i show city district and pincode in different line ? i need your suggestion.

Hi friend,
Yes the link will provide you the information required. But it too has few disadvantages because in some cases it may also fail.
Else just do like this create an internal table of line type string. Add all the address details into it as you required.(Here you have provision to add the format ie you can decide which line should contain which data). Then do delete blank lines.
Then loop the internal table and print the address this will solve your problem. In my project i solved the issue like this.
If you still have queries please revert back to me i will help you.
Thanks,
Sri Hari.

How can I print my address book on to envelopes?

I used to be able to print addresses from my contact list on envelopes now I can't even print the addresses in a group on one page, just their phone numbers appear. I just changed over to icloud. Is this the problem?

I also need to know how to properly print business envelopes from Contact. The MacWorld page online on this is no help.
I am getting: 1. The first one-third of my return address cut off (too far left, and even when moved right still cut off)
2. The person's name in the address appearing on Line 2 Under the business name rather than on Line 1 above it.
Just one of the many glitches I am suffering since updating my iMac to Mt. Lion...

I have been getting messages from Safari when I am on commercial sites where I am sure that I have typed in the address correctly. Messages say that the website was signed by an unknown certifying authority and my personal information may be at risk. Th

Am getting daily messages from Safari warning me that I am on a website with an unknow certifying authority and my personal information may be at risk.
Happens when in Cox webmail and when I am visitying a legitimate site, and I have typed in address correctly such as Citibank rewards site.
Have 3 choices, "Show Certficate" "Cancel" or "Continue". Screen is frozen and cannot exit Safari without acknowledging the message or clicking escape. I had been clicking continue, but after a month or more of many such messages decided to ask Cox. They say it is a virus. Was I careless in clicking continue? What do many messages like this mean? they can't all be unknown certifying authorities can they?

Take each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Are the current date (including the year) and time shown on your system clock? If not, correct them and test.
2. Check that the following files exist:
/System/Library/Keychains/SystemCACertificates.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
If they don't, restore them from a backup or reinstall OS X after backing up all data.
3. Disable any third-party firewall, "security" software, or network filter. Test.
4. In some versions of OS X, Parental Controls has a bug that prevents loading of secure websites. Turn it off.
5. The process by which OS X checks the validity of root SSL certificates doesn't work behind the authenticating SOCKS proxies used on some enterprise networks. If applicable, contact your network administrator. The proxy server may need to have its settings changed.
6. Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter "ocspd" (without the quotes) in the "Filter" text field. Is a process with that name listed?
If not, back up all data, then select
Go ▹ Go to Folder
from the Finder menu bar. Into the text box that opens, copy the following line of text:
/var/db/crls
From the folder that opens, move these two files to the Trash:
crlcache.db
ocspcache.db
You’ll be prompted for your administrator password. Reboot, empty the Trash, and test.

Problem with printing over wireless network

Hello. I have a HP psc 2410 all-in-one printer.
I've recently bought a modem router which has a capability called"printer-server" and I decided to use this feature and print over wifi. I set it up but with a problem. when I print something, for instance, test page, instead of printing just one page, It will print "test page" in 3 pages( something like partial pages and which the last=third page is printed blankly) and then It freezes(printer screen shows "printing" and I have to cancel the job, otherwise it freezes and I have to replug it). I have this trouble not just in test page but at least from IE, office, PDF files. This problem is essentially about Wifi, since If I connect the printer directly to the PC or laptop via usb, it works absolutely fine. also I have tried printing with different laptops over wifi but no go. below are more information which I have to mention:
1)Router is on WPA-PSK encryption type.
2)There is no mac-filtering or hiding SSID going on.
3)one laptop and an iPad is connected to router via wifi and a PC which is connected by LAN cable.
4)The printer IP address is the same as Router's settings page IP address.(192.168.0.1)
5)I can't open the printer's internal web page by entering the printer's IP address in browser since it's the same as router IP address.
6)Firewall on my laptop( windows 7 32-bit) is off and I'm using no Anti-virus.
7) I have tried HP PRINT AND SCAN DOCTOR, but it says the printer is OK.
thanks
Leland
EDIT: after investigating for hours, I finally managed to get rid of freezing problem. now there is just one problem of that partial printing which happens coincidentally over wifi! I mean, sometimes it happens and sometimes not!
any suggestions? I'd really appreciate it
This question was solved.
View Solution.

The bottomline is that this printer has no way of connecting other than a straight USB connection. In order to make it wireless you have to have a device that will give it an network IP address. The printer by itself can not do this.
The only way to get this printer on a network is to buy a SEPERATE USB Printer Server. Or, buy a separate router, like I said, that has a USB connection on the back that will support printers.
You can not connect it the way you want as it stands right now.
However, call your ISP and have them set it up IF their Gateway device has a USB connection and really can support a printer. It is their issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Problem to print Thai address correctly as it's overlapped

Similar Messages

Maybe you are looking for