Problem Upgrading Kernel to he Current Level for ECC 6 V5R4M0 OS/400

Hello,
I am having problem upgrading my ECC 6.0 kernel to the current level (236), the steps I have done is
1) downloaded and copied following kernel fix to tmp folder under rootbin.
APYR3FIX.SAR,APYSAP.SAR,LODSAPKRN.SAR
2) Apply the above fix using following command
- APYR3FIX SID(SID) SAVF(R3FIX700U/APYR3FIX) SAVLIB(GEN700UOPT) KRNLIB(SAPSIDUC)
- APYR3FIX SID(SID) SAVF(R3FIX700U/APYSAP) SAVLIB(GEN700UOPT) KRNLIB(SAPSIDUC)
- APYR3FIX SID(SID) SAVF(R3FIX700U/LODSAPKRN) SAVLIB(GEN700UOPT) KRNLIB(SAPSIDUC)
Started applying new kernel
1) Copy sapexe.sar and sapexedb.sar into tmp folder i.e kern under rootbin.
2) created one file using notepad called parts ( w/o extension)
parts file having following content.
SAPEXE.SAR,
SAPEXEDB.SAR,
3) copied parts file into tmp folder.
4) Create new kernel library like SAPSIDUKRN using following command.
- CRTLIB LIB(SAPSIDUKRN)
5) Apply latest kernel to newly created kernel library using following command.
- LODSAPKRN DEV(STMF) MNTPNT('/tmp') KRNLIB(SAPSIDUKRN) USERDEF(YES) LIST('/tmp/parts')
When i run the command it says successfully completed, but no files are present in the newly created kernel. please guide me on how to proceed with this.
Thank You

Hi Vijay,
From reading your description I wonder if you simply mixed up directory names. In step 1) of the kernel load you mentioned directory kernel below rootbin. In the command you reference directory /tmp. Although LODSAPKRN should complain if any of the given objects is missing it might worth checking.
However, did you recognize there is a new option USERDEF(FLAT) available with the latest version (246) of LODSAKRN? This option is supposed to allow standard SAPEXE+SAPEXEDB packages being imported without having to provide the parts file. Check note 912575 if you are interested - english version should be getting updated today.
Regards,
Thomas

Similar Messages

Suggested Support Pack Level for ECC 6.0 Upgrade - Target

Hi ,
Can someone give us the suggested support pack level for the ECC 6.0 system after the upgrade.
Our current patch level is:
SAP_ABA     700     0012     SAPKA70012
SAP_BASIS     700     0012     SAPKB70012
PI_BASIS     2005_1_700     0012     SAPKIPYJ7C
ST-PI     2005_1_700     0003     SAPKITLQI3
SAP_BW     700     0014     SAPKW70014
SAP_AP     700     0009     SAPKNA7009
SAP_APPL     600     0010     SAPKH60010
SAP_HR     600     0013     SAPKE60013
EA-IPPE     400     0008     SAPKGPID08
EA-APPL     600     0008     SAPKGPAD08
EA-DFPS     600     0008     SAPKGPDD08
EA-FINSERV     600     0008     SAPKGPFD08
EA-GLTRADE     600     0008     SAPKGPGD08
EA-HR     600     0013     SAPKGPHD13
EA-PS     600     0008     SAPKGPPD08
EA-RETAIL     600     0008     SAPKGPRD08
FINBASIS     600     0008     SAPK-60008INFINBASIS
ECC-DIMP     600     0008     SAPK-60008INECCDIMP
ERECRUIT     600     0008     SAPK-60008INERECRUIT
FI-CA     600     0008     SAPK-60008INFICA
FI-CAX     600     0008     SAPK-60008INFICAX
INSURANCE     600     0008     SAPK-60008ININSURANC
IS-CWM     600     0008     SAPK-60008INISCWM
IS-H     600     0008     SAPK-60008INISH
IS-M     600     0008     SAPK-60008INISM
SEM-BW     600     0008     SAPKGS6008
IS-OIL     600     0008     SAPK-60008INISOIL
IS-PS-CA     600     0008     SAPK-60008INISPSCA
IS-UT     600     0008     SAPK-60008INISUT
LSOFE     600     0008     SAPK-60008INLSOFE
IRMIPM     30B     0005     SAPK-30BI7INIRM
IRMGLB     30B     0005     SAPK-30BG7INIRM
ST-A/PI     01K_ECC600     0000     -
GSCDMC     600     0001     SAPK-60001INGSCDMC
RCMGT     601     0001     SAPK-60101INRCMGT
Thanks
Senthil

Hi Senthil,
of course it is always recommended to use the newest Support Package Stack,
but if your system (your business processes) are working fine, I would recommend you to
import support package only then when you have an error or you want to have a special fiunctionality.
Some customers play support packages into the system only twice a year, because the business processes
should be tested after the sp import.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Unable to upgrade java components through JSPM tool for ECC 6.0 system

Hello All,
We are upgrading JAVA components to SP-STACK 12 for our system GD0(ECC
6.0 TWS ),and we were struck in the middle(only few components have been deployed and for others it is throwing error).
The error it throws from /SDM/program/log/ is
"Cannot login to the SAP J2EE Engine using user and password as providedin the Filesystem Secure Store. Enter valid login information in the
Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more
information, see SAP note 701654."
And for this I followed note#701654 and updated the password of admin in Filesystem Secure Store and restarted the J2ee server ,even after doing
all this steps also still we are facing the same problem.
Currently when I try to login into J2ee engine through URL
:(<host>:<port>) it displays "Application you have requested is stoped",and when I check throw jcmon all three were under running
status(dispatcher,server0,sdm)
Kindly advise me on this..as I am struck in halfway..
Best Regards
Raki

Hello Nirmal,
Thanks for Update,
I tried again by changing the password through configtool "secure store" and then I restarted j2ee_engine also .Even though i am getting the same error while applying through SDM tool & JSPM tool also.
This is error log it shows in SDM tool screen at the time of deployment.
===========================================================================
Deployment started Thu Sep 13 13:15:22 BST 2007
===========================================================================
Starting Deployment of DocumentServicesLicenseManager
Aborted: development component 'DocumentServicesLicenseManager'/'com.adobe'/'Adobe Systems'/'710.20060929113452.336248'/'2', grouped by software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.12.0.20070507083121''/'2':Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more information, see SAP note 701654.com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthExceptionWrapper: Wrong security credentials detected while trying to obtain connection to the J2EE Engine. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMAUTHEXC)
Deployment of DocumentServicesLicenseManager finished with Error (Duration 4108 ms)
Starting Deployment of ADSSAP
Aborted: software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.12.0.20070507083121''/'2':Failed deployment of SDAs:development component 'DocumentServicesLicenseManager'/'com.adobe'/'Adobe Systems'/'710.20060929113452.336248'/'2' : abortedPlease, look at error logs above for more information!
Deployment of ADSSAP finished with Error (Duration 1549 ms)
Can you kindly update me ASAP, to fix this problem..
Thanks one and all for helping me.
Best Regards
Raki

Problem upgrading kernel to level 146.

I'm going to update my kernel from 92 to 146 but I have problem during startup.
My disp+work.exe process go stopped.
during upgrade from level 92 to level 146 system shutdown disp+work.exe
db2diag.log no entry about error.
With level 92 system works correctly.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid BW2
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2972
Thu Jun 12 09:19:23 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-
232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 2972) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
Thu Jun 12 09:19:27 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and
adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >t1srv5bw_BW2_03 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size:
6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Jun 12 09:19:28 2008
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 255 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 8600
argv[0] = C:\usr\sap\BW2\DVEBMGS03\exe\jcontrol.exe
argv[1] = C:\usr\sap\BW2\DVEBMGS03\exe\jcontrol.exe
argv[2] = pf=C:\usr\sap\BW2\SYS\profile\BW2_DVEBMGS03_t1srv5bw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=03
argv[6] = -DSAPSYSTEMNAME=BW2
argv[7] = -DSAPMYNAME=t1srv5bw_BW2_03
argv[8] = -DSAPPROFILE=C:\usr\sap\BW2
\SYS\profile\BW2_DVEBMGS03_t1srv5bw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( t1srv5bw) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is
>t1srv5bw_BW2_03 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Thu Jun 12 09:20:08 2008
ERROR => DpHdlDeadWp: W0 (pid 2128) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 6872) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 5432) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 6868) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 1832) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 8828) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 8072) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 6088) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W8 (pid 7036) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 6748) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 7396) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 8568) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 4900) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 7128) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 7400) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 8624) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:18 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jun 12 07:20:18 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time
Program Cl User Action Table
0 DIA 2128 Ended no 1 0
0
1 DIA 6872 Ended no 1 0
0
2 DIA 5432 Ended no 1 0
0
3 DIA 6868 Ended no 1 0
0
4 DIA 1832 Ended no 1 0
0
5 DIA 8828 Ended no 1 0
0
6 UPD 8072 Ended no 1 0
0
7 UPD 6088 Ended no 1 0
0
8 UPD 7036 Ended no 1 0
0
9 ENQ 6748 Ended no 1 0
0
10 BTC 7396 Ended no 1 0
0
11 BTC 8568 Ended no 1 0
0
12 BTC 4900 Ended no 1 0
0
13 BTC 7128 Ended no 1 0
0
14 SPO 7400 Ended no 1 0
0
15 UP2 8624 Ended no 1 0
0
Dispatcher Queue Statistics Thu Jun 12 07:20:18 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 (
25%)
since last update total 8, udp 6 ( 75%), shm 2 (
25%)
Dump of tm_adm structure: Thu Jun 12 07:20:18 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Jun 12 07:20:18 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:23 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >t1srv5bw_BW2_03 <
(normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=8600)
killing process (8600) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 208 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 208 (pos=2)
SiSelNRemove: removed sock 208
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 208
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (8632) (SOFT_KILL)
Stop icman
killing process (8104) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:8632 HANDLE:328)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:24 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:8632 HANDLE:328)
wait for end of icman
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:25 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:26 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:27 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:28 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8104 HANDLE:336)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:8104 HANDLE:336)
[DpProcDied] Process lives (PID:8600 HANDLE:308)
DpHalt: disconnect j2ee listener
DpHalt: wait for end of j2ee server
[DpProcDied] Process lives (PID:8600 HANDLE:308)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8600 HANDLE:308)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8600 HANDLE:308)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8600 HANDLE:308)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8600 HANDLE:308)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:40 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8600 HANDLE:308)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:41 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8600 HANDLE:308)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:42 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:8600 HANDLE:308)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=361
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 12 09:20:43 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:8600 HANDLE:308)
DpStartStopMsg: send stop message (myname is
>t1srv5bw_BW2_03 <)
NiIMyHostName: hostname = 't1srv5bw'
AdGetSelfIdentRecord:
>
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0,
key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0,
key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0,
key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0,
key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0,
key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0,
key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -DpHalt: received 4 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0,
key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Jun 12 09:20:44 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 240 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 240 (pos=3)
SiSelNRemove: removed sock 240
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord:
>
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 240
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2972) [dpxxdisp.c 10421]
Good Bye .....
Edited by: Gianluca Vinco on Jun 13, 2008 12:50 PM

trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Jun 13 12:53:38 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\BW2\DVEBMGS03\exe\dbdb6slib.dll' ...
B Library 'C:\usr\sap\BW2\DVEBMGS03\exe\dbdb6slib.dll' loaded
B Version of 'C:\usr\sap\BW2\DVEBMGS03\exe\dbdb6slib.dll' is "700.08", patchlevel (0.144)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 03
M sid BW2
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 146
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 5104
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5104) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 23680 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E80050, size: 6347104)
M DpShMCreate: allocated sys_adm at 0000000010E80050
M DpShMCreate: allocated wp_adm at 0000000010E82150
M DpShMCreate: allocated tm_adm_list at 0000000010E87DD0
M DpShMCreate: allocated tm_adm at 0000000010E87E30
M DpShMCreate: allocated wp_ca_adm at 00000000113EBCD0
M DpShMCreate: allocated appc_ca_adm at 00000000113F1A90
M DpShMCreate: allocated comm_adm at 00000000113F39D0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001147A660
M DpShMCreate: allocated gw_adm at 000000001147A6E0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001147A710
M DpShMCreate: allocated wall_adm at 000000001147A720
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Jun 13 12:53:39 2008
M ThInit: running on host t1srv5bw
M calling db_connect ...
C Registering callback for dynamic profile parameters
C
C Fri Jun 13 12:53:46 2008
C DB2 library successfully loaded DB2 library '
t1srv5bw\sapmnt\BW2\SYS\global\db6\WINDOWS_AMD64\db6_clidriver\bin\db2app64.dll' successfully loaded
C
C DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
C
C DB6 shared library (dbdb6slib) patchlevels
C (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
C (0.8) Support of SDBUPDEXCL (note 847616)
C (0.9) DB6: use export file for dbdb6slib (note 835135)
C (0.9) DB6: Core in getAndBindSQLDA (note 833183)
C (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
C (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
C (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
C (0.17) DB6: special characters in sidadm passwd (note 865839)
C (0.21) DB6: no SAP_INFO comments (note 873889)
C (0.22) DB6: hints: get correlation names from view texts (note 868888)
C (0.23) DB6: hints: get correlation names from view texts (note 868888)
C (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
C (0.27) DB6: activate value compression (note 886231)
C (0.28) DB6: optimization guidelines on views part 2 (note 868888)
C (0.30) DB6: no SQL trace for SQLCancel (note 892111)
C (0.33) DB6: append SAP_TA comment (note 873889)
C (0.34) DB6: activate value compression with quoted names (note 886231)
C (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
C (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
C (0.50) DB6: reread passwords for secondary connections (note 931742)
C (0.52) DB6: double quote table names in optguidelines (note 868888)
C (0.54) DB6: error handling in DBSL CLP (note 940260)
C (0.69) DB6: technical support of DB2 CLI driver (note 962892)
C (0.73) DB6: log table name on TRUNCATE failure (note 970743)
C (0.79) DB6: column type XML in index size calculation (note 982993)
C (0.82) DB6: CAST for SSTRING data types (note 989568)
C (0.86) DB6: long runtimes for R3szchk (note 1000847)
C (0.88) DB6: patch collection Dec 06 (note 1005574)
C (0.96) DB6: patch collection Jan 07 (note 1017852)
C (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
C (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
C (0.107) DB6: patch collection Apr 07 (note 1047194)
C (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
C (0.113) DB6: work process type in application snapshot (note 1059905)
C (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
C (0.117) DB6: patch for execution of long DDL statements (note 1069658)
C (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
C (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
C (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
C (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
C (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
C (0.128) DB6: db6_free on invalid memory area (note 1092030)
C (0.133) DB6: statement cache enhancements (note 1101031)
C (0.136) DB6: change for enhancement pack installer (note 1111536)
C (0.138) DB6: improoved table size estimate for DB8 V8 (note 1119934)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C
C Supported features:
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C
C Fri Jun 13 12:53:51 2008
C Running with CLI driver
C
C Fri Jun 13 12:53:53 2008
C *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
C &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1013N The database alias name or database name "BW2" could not
C &+ be found. SQLSTATE=42705
C &+
C &+
C *** ERROR in DB6Connect[dbdb6.c, 1640] (END)
C
C Fri Jun 13 12:53:54 2008
C *** ERROR => DbSlConnect to 'BW2' as 'sapbw2' failed
[dbdb6.c 1645]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10468]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server t1srv5bw_BW2_03 on host t1srv5bw (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Jun 13 12:53:54 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5104) [dpnttool.c 327]

Problems upgrading to JDBC 5.1 driver for MS SQL Server

Hi,
I recently upgraded to the Weblogic JDBC 5.1 driver for MS SQL Server and I am
now receiving exceptions in my application when attempting to execute a prepared
statement. I was previously using the Weblogic JDBC 4.x driver for MS SQL Server
and everything was working fine without any problems. For some reason I am receiving
a java.lang.CloneNotSupportedException using the new driver. I am using the setLong(),
setString(), and setObject() methods of the PreparedStatement and then attempting
to execute. The application code has not changed, so it seems that something
has changed in the new driver implementation. Has anyone else had this problem
or know a work around? Here is a snippet of the actual exception:
S2 [09/30/02 10:46]: java.sql.SQLException: java.lang.CloneNotSupportedException
: Error in TdsParameter clone: cannot make duplicate of Stream object
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsPreparedInputStream
.<init>(TdsPreparedInputStream.java:99)
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsStatement.doEscapeP
rocessing(TdsStatement.java:1317)
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsStatement.execute(T
dsStatement.java:173)
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsStatement.executeUp
date(TdsStatement.java:94)
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsStatement.executeUp
date(TdsStatement.java:1438)
Thanks, Nadeem.

Nadeem Khokhar wrote:
Is it true that the Weblogic jDriver for MS SQL Server is deprecated? That's the
message that I got from BEA Support and here is the link they sent:
http://edocs.bea.com/wls/docs70/mssqlserver4/install_jmsq4.html#415356
It recommends using Microsoft's JDBC driver instead. Any thoughts on this? From
what I understand and what I have read on the newsgroups, the Microsoft JDBC driver
is still quite buggy and has numerous problems.
Thanks, Nadeem.It is deprecated, but still supported, and is more recent in the download than the one in
the 5.1 server. We do recommend MS's driver, or that of www.inetsoftware.de. The
MS driver is fairly stable now, and may certainly have bugs, as does our driver. The MS
driver is good because it is not deprecated, and supports JDBC 2.0 etc.
Joe
>
>
Joseph Weinstein <[email protected]> wrote:
What version of 5.1? You should be running with the latest service pack.
If that doesn't help, please download the latest 5.1 driver from our
site, and
make sure it's in the weblogic.classpath ahead of all other stuff, by
editting the
startWeblogic script.
Joe
Nadeem Khokhar wrote:
Hi,
I recently upgraded to the Weblogic JDBC 5.1 driver for MS SQL Serverand I am
now receiving exceptions in my application when attempting to executea prepared
statement. I was previously using the Weblogic JDBC 4.x driver forMS SQL Server
and everything was working fine without any problems. For some reasonI am receiving
a java.lang.CloneNotSupportedException using the new driver. I amusing the setLong(),
setString(), and setObject() methods of the PreparedStatement and thenattempting
to execute. The application code has not changed, so it seems thatsomething
has changed in the new driver implementation. Has anyone else hadthis problem
or know a work around? Here is a snippet of the actual exception:
S2 [09/30/02 10:46]: java.sql.SQLException: java.lang.CloneNotSupportedException
: Error in TdsParameter clone: cannot make duplicate of Stream object
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsPreparedInputStream
<init>(TdsPreparedInputStream.java:99)
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsStatement.doEscapeP
rocessing(TdsStatement.java:1317)
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsStatement.execute(T
dsStatement.java:173)
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsStatement.executeUp
date(TdsStatement.java:94)
S2 [09/30/02 10:46]: at weblogic.jdbcbase.mssqlserver4.TdsStatement.executeUp
date(TdsStatement.java:1438)
Thanks, Nadeem.

Kernel Upgrade for ECC 6

Hi all,
I want to upgrade the kernel patch level for ECC 6.
I download all files in http://www.service.sap.com/patches
path: Entry by application group -> Additional Components -> SAP Kernel ->SAP Kernel 32 bit Unicode -> SAP KERNEL 7.00 32-BIT UNICODE -> Windows Server on IA32 32bit -> Database independent
Then, I extract all, stop SAP server and copy all these files to \SYS\exe\uc\ and restart server. But, on SAPMMC the dispatcher remains yellow "Dispatcher - Running but Dialog Queue info unavailable".
The old kernel patch level is 75, and I extract the file SAPEXE_102-20000972.SAR (patch level 102), but when checking system status, I found that the kernel patch level is not updated.
Do you know this problem ? Do I miss some steps ?
Thank you very much,
Sylvecast
null

MMC connects to the underlying sapstartsrv.exe windows service. Beside starting up and shutting down the processes listed in the start profile, this service will also connect to shared memory segments to find out the status of work processes and the dispatcher.
When starting the system it will normaly first execute sapcpe.exe to replicate new executables from the central replication directory (DIR_CT_RUN) to the instance executable directory (DIR_EXECUTABLE).
If you provide a new kernel version to DIR_CT_RUN, it will copy and start a new disp+work.exe and sapstartsrv.exe to the local directory WHILE the old sapstartsrv.exe service executable is still running.
if the new disp+work.exe contains changes to shared memory structures (compared to the old one) the old sapstartsrv.exe will not be able to read them. Dispatcher - Running but Dialog Queue info unavailable is one result of it, unavailable work process information another one.
sapstartsrv.exe will detect that there is a new version of it's executable by comparing sapstartsrv.exe against sapstartsrv.exe.new (which have the same timestamp in DIR_CT_RUN) and will restart the service with the new executable after 5 minutes which will normaly. This automatically fixes the problem and is documented in windows application log (eventviewer).
Peter

Upgradation Minimum sp level & kernel level for SAP 4.7 to ECC 6.0

Hi,
We recently created a test box , copy of devolopment.
We are running on SAP 4.7 with sap_basis and sap_abap with sp level 46.
SAP 4.7 with kernel release 640 and kernel patch version 155.
Oracle 9i.
What is minimum support pack level and kernel patch level required to upgrade from sap 4.7 to ecc 6.0.
As per threads it looks like kernel patch version should be 175.
Can any one guide me with sap note which provides the info of minimum sp level and kerenl patch level.

The source system requires a certain support package level (that is described in the upgrade guides) because the tools that to the import require them.
So the easiest way is to check the upgrade guides and the mentioned notes which is the minimum support package level for the source system to start the upgrade.
The target level must be at least equivalent or higher.
Markus

Kernel upgrade to patch level 196, ECC 5.0, MSCS resource issue.

Hi,
We have 3 system landscape DEV, QAS & PRD on win 2003, oracle 10G, ECC 5.0.
Our PRD system is on MSCS with CI on node A and DB on node B.
Recently I successfully upgrade kernel off DEV & QAS system to patch level 196 of stack 18.
When I tried to upgrade the kernel of PRD system one of the cluster resource drive (The drive contains the usr folder) is automatically moving from Node A to Node B and I got the error u201Capplication server shut downu201D. We donu2019t have additional application server in the landscape.
Please suggest the solution.
Regards,
Rajesh

Hi Juan,
How are you? Thanks for your reply.
We are using ECC 5.0. I have found more errors in dev_w0 as follows,
ERROR => ShmCreate( ATTACH 62, 85588600) failed 1 [mpixx.c 843]
ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 3556]
in_ThErrHandle: 1
ERROR => tskh_init: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9621]
Info for wp 0
stat = 4
reqtype = 1
act_reqtype = -1
rq_info = 0
tid = -1
mode = 255
len = -1
rq_id = 65535
rq_source = 255
last_tid = 0
last_mode = 0
int_checked_resource(RFC) = 0
ext_checked_resource(RFC) = 0
int_checked_resource(HTTP) = 0
ext_checked_resource(HTTP) = 0
report = > <
action = 0
tab_name = > <
LOCATION SAP-Server sapcigrp_ECP_00 on host sapeccprddb (wp 0)
ERROR tskh_init: DpInitMpi
TIME Sun Nov 16 05:13:07 2008
RELEASE 640
COMPONENT Taskhandler
VERSION 1
RC 17
MODULE thxxhead.c
LINE 9806
COUNTER 1
PfStatDisconnect: disconnect statistics
Entering TH_CALLHOOKS
ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
TrThHookFunc: called for WP dump
ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed hxxtool3.c 254]
Entering ThSetStatError
Entering ThReadDetachMode
call ThrShutDown (1)...
***LOG Q02=> wp_halt, WPStop (Workproc 0 4000) [dpnttool.c 357]
Please suggest the solution
Thanks & Regards,
Rajesh

Patch levels for Oracle and kernel

Hi everyone,
Can you pls tell what are the maximum and minimum patch levels that can be used for BW 3.5 installation on LINUX RHEL 4 ,
oracle -10.2.0.2 & kernel - 6.4 .
Thanks in advance,
Praveen

hi people,
we have checked for the status of support package in Transaction SPAM traffic signal is still red and in the Phase RUN_SPAU_? it is stuck and even after restarting import it shows clean-up phase is left and it ends with same error mention above
the support package name is SAPKB70014 size is 116266 MB now after restarting the Import the following error message comes
The import was stopped, since an error occurred during the phase RUN_SPAU_?,
which the Support Package Manager is unable to resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: RUN_SPAU_?
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0255
- Error message: Could not connect to semaphore server
we run all the phase in background, and even after entering the support package number in transaction SPAU there it is showing
"No objects within selected filter parameteres"
Q.1 Any idea what went wrong and how to fix that?
Q.2 Is there any problem if we run the all four phases of support package in background or it should be run in dialog
latest tp & R3trans updated?

How can I contact customer service because my registration number according to Adobe cannot be upgraded; and Adobe's message to me said that I was registered for CS4; I am currently registered for CS5. Is there no way to contact customer service via emai

How can I contact customer service because my registration number according to Adobe cannot be upgraded; and Adobe's message to me said that I was registered for CS4; I am currently registered for CS5. Is there no way to contact customer service via email or phone re this problem?

Problems with registration you can contact our support team at Contact Customer Care. Please make sure you are signed in and selecting the proper selections from the pull down. If you continue to not be able to contact our support team then I would strongly recommend the use of a different web browser, computer, smart phone, or tablet.

Using my current ID and password I can sign in to Adobe. When I try to download the upgrade to Flash Player they ask for ID and password. When I put in my current one it is rejected. What causes this and how do I correct it?

Using my current ID and password I can sign in to Adobe. When I try to download the upgrade to Flash Player they ask for my ID and Password. When I insert my current ID and password it is rejected. How do I correct this problem? Is it an incorrect sign in from an old ID, and/or an old password associated with Flash Player?

The password prompt is supplied by the operating system, and is intended to protect you from accidentally installing software. You will get this prompt for any installation outside the App Store context.
If you do not need to enter a username or password when starting your computer, you can probably just leave the password field blank when acknowledging this prompt.

Problem with Revision level for a Material

Hi All,
I have a problem with Revision Levels for a Material.
I want to know the Revision Level for a particular Material for BOM Creation.
Can anyone please let me know from which Table or Funtion Module can I get the Rev Level, once I pass MATNR (Material) and AENNR (Change Number).
<REMOVED BY MODERATOR>
Thanks and Regards,
Harish Kalla
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

HI,
You can use table AEOI.
Hope this helps.
<REMOVED BY MODERATOR>
Regards,
Sipra
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

HT4623 I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to 11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestion

I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to 11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestions?

I had the same problem. My phone wasn't finding it so I tried plugging it into my laptop and it said I needed the latest iTunes which I already had.... I unplugged my phone from my laptop and did a soft reset to my phone (hold down the lock button and home button at the same time until your phone turns off) once it turns back on you should find the update... Click general... Software update. Worked for me!

Java.util.logging - Problem with setting different Levels for each Handler

Hello all,
I am having issues setting up the java.util.logging system to use multiple handlers.
I will paste the relevant code below, but basically I have 3 Handlers. One is a custom handler that opens a JOptionPane dialog with the specified error, the others are ConsoleHandler and FileHandler. I want Console and File to display ALL levels, and I want the custom handler to only display SEVERE levels.
As it is now, all log levels are being displayed in the JOptionPane, and the Console is displaying duplicates.
Here is the code that sets up the logger:
logger = Logger.getLogger("lib.srr.applet");
// I have tried both with and without the following statement
logger.setLevel(Level.ALL);
// Log to file for all levels FINER and up
FileHandler fh = new FileHandler("mylog.log");
fh.setFormatter(new SimpleFormatter());
fh.setLevel(Level.FINER);
// Log to console for all levels FINER and up
ConsoleHandler ch = new ConsoleHandler();
ch.setLevel(Level.FINER);
// Log SEVERE levels to the User, through a JOptionPane message dialog
SRRUserAlertHandler uah = new SRRUserAlertHandler();
uah.setLevel(Level.SEVERE);
uah.setFormatter(new SRRUserAlertFormatter());
// Add handlers
logger.addHandler(fh);
logger.addHandler(ch);
logger.addHandler(uah);
logger.info(fh.getLevel().toString() + " -- " + ch.getLevel().toString() + " -- " + uah.getLevel().toString());
logger.info("Logger Initialized.");Both of those logger.info() calls displays to the SRRUserAlertHandler, despite the level being set to SEVERE.
The getLevel calls displays the proper levels: "FINER -- FINER -- SEVERE"
When I start up the applet, I get the following in the console:
Apr 28, 2009 12:01:34 PM lib.srr.applet.SRR initLogger
INFO: FINER -- FINER -- SEVERE
Apr 28, 2009 12:01:34 PM lib.srr.applet.SRR initLogger
INFO: FINER -- FINER -- SEVERE
Apr 28, 2009 12:01:40 PM lib.srr.applet.SRR initLogger
INFO: Logger Initialized.
Apr 28, 2009 12:01:40 PM lib.srr.applet.SRR initLogger
INFO: Logger Initialized.
Apr 28, 2009 12:01:41 PM lib.srr.applet.SRR init
INFO: Preparing Helper Files.
Apr 28, 2009 12:01:41 PM lib.srr.applet.SRR init
INFO: Preparing Helper Files.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Getting PC Name.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Getting PC Name.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Finished Initialization.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Finished Initialization.Notice they all display twice. Each of those are also being displayed to the user through the JOptionPane dialogs.
Any ideas how I can properly set this up to send ONLY SEVERE to the user, and FINER and up to the File/Console?
Thanks!
Edit:
Just in case, here is the code for my SRRUserAlertHandler:
public class SRRUserAlertHandler extends Handler {
     public void close() throws SecurityException {
     public void flush() {
     public void publish(LogRecord arg0) {
          JOptionPane.showMessageDialog(null, arg0.getMessage());
}Edited by: compbry15 on Apr 28, 2009 9:44 AM

For now I have fixed the issue of setLevel not working by making a Filter class:
public class SRRUserAlertFilter implements Filter {
     public boolean isLoggable(LogRecord arg0) {
          if (arg0.getLevel().intValue() >= Level.WARNING.intValue()) {
               System.err.println(arg0.getLevel().intValue() + " -- " + Level.WARNING.intValue());
               return true;
          return false;
}My new SRRUserAlertHandler goes like this now:
public class SRRUserAlertHandler extends Handler {
     public void close() throws SecurityException {
     public void flush() {
     public void publish(LogRecord arg0) {
          Filter theFilter = this.getFilter();
          if (theFilter.isLoggable(arg0))
               JOptionPane.showMessageDialog(null, arg0.getMessage());
}This is ugly as sin .. but I cannot be required to change an external config file when this is going in an applet.
After much searching around, this logging api is quite annoying at times. I have seen numerous other people run into problems with it not logging specific levels, or logging too many levels, etc. A developer should be able to complete configure the system without having to modify external config files.
Does anyone else have another solution?

Minimum SP Level For BW 3.1 To Perform Upgrade To NW04s

Colleagues,
My customer is preparing for an upgrade to NetWeaver 2004s, and is trying to find out if there is a minimum Support Package Level for BW 3.1, in order to perform the upgrade. Does anybody know if there is a minimum SP Level they must be on (in BW 3.1) in order to be able to perform the upgrade?
Thank you in advance for any guidance you may be able to offer! -M

Hi Michael,
please check the installation / master guide in the SAP Service Marketplace (links can be find by searching this forum with the respective terms).
This shoul have the information needed.
In addition, you can check
<a href="http://service.sap.com/upgrad">SAP Service Marketplace /upgrade</a>
Cheers
SAP NetWeaver BI Organisation

Problem Upgrading Kernel to he Current Level for ECC 6 V5R4M0 OS/400

Similar Messages

Maybe you are looking for