Problem using a decision making operation (if - than, if not - then)
I have a signal comming in. based on this signal the program has to make a desicion. I was trying this with the true-fase feature, but something wrong. Could you help me with this.
Wire your signal to a logic compare vi where the resultant True/False is wired to a Case structure, and you'll know what to do there.
Another option is using the "Select.vi" from the Comparison palette - check it out.
Good Luck, Doug
Similar Messages
-
Problem using pre-mapping process operator in owb 9i
Hi,
I was trying to use the pre-mapping process operator in owb 9i. Problem is that the manual does not specify how the inputs need to be connected to this operator. Following is what I went through -
I created a mapping table operator and a mapping dimension operator and connected these two. Then i created a pre-mapping process operator selecting the LTRIM function. Further I connected one of the table attributes to this pre-mapping operator as input and connected the output of this pre-mapping operator to the appropriate dimension operator attribute. On performing Validate, following error message was flashed -
VLD-2451 : Illegal connection to pre-mapping process operator
I am trying to learn how to use OWB 9i from the manual. So my interpretation of the use of the pre-mapping process operator may be wrong.
In any case kindly help,
Thanks
SajuPre-mapping process is use to perform some operations preceding to mapping operation itself.
For example, if your mapping is designed to incrementally append data to table for the definite time interval (witch is a parameter of the map operation) you might want to perform the table data cleanup for that period. That will allow for reload data number of time.
In this case you have to define the procedure witch perform cleanup and than include the call to that procedure as a pre-mapping process.
Other examples of pre- and post mapping process is disabling referential integrity before loading and re-enabling them after loading.
Anyway, OWB documentation has clear definition for pre- and post-mapping processes. -
i am having the problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
i have taken the sim card out and put it back in even then its of no use.
if any one out there can help us it would be very nice of them. thank you for your time.I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where -
Problem using iPad to receive and send emails when not at home
I am unable to send or receive emails from any outside wifi location like Tesco / ikea but once home there is not a problem. Messages reads "Server unable to respond" I was wondering if it is a security issue ?
Greetings
I suspect that the issue is the SMTP server settings. On your home network you are using your providers SMTP server and all is fine (If you check your email account configs you will find that the SMTP server is set to your providers?).
When you use a different network (provider) mail will not be sent unless you use that networks (providers) SMTP server (this is a security issue to address ways of "spamming").
So if youre 3G/4G provider is the same as you home provider all will work well via your home WiFi. If you turn off WiFi and just use your 3G/4G connection to send mail (iPhone/iPad etc) all will work well (when you are out and about and using anothers WiFi network).
If you are connected to, say a MacDonalds WiFi, mail will probably not be sent. (It will be received though).
Using WEB mail interface (via your WEB browser) removes this problem as well.
(A SMTP server is what is used to send email. So to successfully use anothers (not a networks the same as your providers) WiFi network and send email via it, you must know the SMTP servers name and reconfigure your email account/s to use that server to send mail.) -
Problems using Dreamweaver CS5 on Maverick Operating System
I have updated the operating system from Lyon to Maverick and I am having problems using Dreamweaver CS5, I open the program and it closes automatically. I had no problems using Dreamweaver on Lyon operating system. Is there a patch or a solution to this problem? Thanks!
Are you intending to purchase a standalone version of Dreamweaver CS5?
Your work computer has probably got a CS4 Creative Suite installed (Design Premium CS4?).
You won't be able to upgrade Dreamweaver CS4 (from the Suite) on your work computer to standalone Dreamweaver CS5. It's not a valid upgrade path.
Tip: CS6 is due to be released very soon.
http://store.adobe.com/store/en_us/popup/offer/cs55_cs6_faqchannel.html
Although free upgrades from CS5 (purchased after 26 March 2012) are available, there is some paperwork involved. In your position, I personally prefer to wait until CS6 ships - unless CS5 is really the version you want, of course. -
Problem with the operator less than or equal to in a weby query
Hi all.
The universe is a OLAP Universe
When i created a query in webi and put the month in the filter area with the operator less than or equal to like this.
Month (less than or equal to) 2010.01 for example. The all result brings also the all values like 2010.02, 2010.03, etc
What is the problem and how can fix that ?
ThanksLooks like you are using a less than or equal to with a Sting data type.
I think you should change to your filter to Year <= 2010 And Month <= 1. Hope you have a month and year object in you BeX.
Anil -
When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message ‘An error as occurred. Please try again later’. It has been this way for some weeks. I don’t have this problem using Safari or Opera.
I believe that our “Werbung problem” adds an additional second hyperlink to the pop-up window. This second link is activated whenever you trigger a saved hyperlink to a Mail.com site.
I had the same problem and eliminated it by deleting all bookmarks, hyperlinks and automatic links that take firefox to a mail.com address. So I just deleted all bookmarks I had saved for mail.com. I also changed my home page link because it also went to my email at mail.com. I then did a warm boot, opened firefox and re-saved my bookmarks and homepage to the desired addresses. Good luck. -
The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe> -
Hi All,
I have a customized subview which provides me the required tasks and for the same I have added two more columns for Approval and Rejection which are basically checkboxes.
I have a Submit button as well. Based on the selection of the check boxes I have to perform some action on click of the submit button.
Currently I am getting an error "This action is not valid for this item".And thus I am not able to achieve the requirement of decision making.
I request you all to share your experience so that I can proceed.
Regards
DKHi.
If I understand it correctly, the user will either perform the Accept action, or the Reject action.
So why dont you use a radio button group, instead of checkboxes. the given error will not occur.
With checkboxes, you will have 4 altenatives, not two.
Another alternative is using two buttons, which is also used in the workflow scenario. But this option depends on how you have planned your event handling.
regards,
Kshitij. -
Problem initiating process with multiple operations using HTTP/SOAP
Hi,
I have defined a process which has multiple operations. My process starts with a pick activity containing onMessage branches for each possible operation. When I initiate this service using the BPEL console, I choose one of the operations and everything works fine.
However, when I initiate this process using an HTTP/SOAP web service call using JMeter, always the first branch is executed regardless of the message I send.
My operations are document/literal. Due to some restrictions, I cannot define a SOAPAction for the operations. Could this be the problem? Is there a workaround for this? If this is not the problem, what could be the cause?
I'm using version 10.1.2.1.
Any help will be appreciated. Thanks in advance..hi i am using 10.1.3 and still i can not initiate a process with multiple operations. Is there anybody to tell if pick activity works fine and if there are some points to consider?
If there is a problem is there any solution to make a process with multiple operations? -
I-tunes is note letting me access i-tunes store without first dowloading the new version of i-tunes. The problem is that my older operating system won't work and is not allowing the newer i-tune versions to work. How can I just get use the old i-tunes?
Hi,
Not sure if any of you above have managed to solve your problem or not but after coming across this same problem myself today as I am currently 'sofa bound' I decided to make it my mission to find a way around it.
Initially I did think, having ready what seemed like a million questions and people with the same problem, that the only way was to buy OS X 10.5 ... HOWEVER, no. In among all these threads I found a jewel - Download I Tunes 9.2.1 which gets rid of the download itunes 10 advert and allows you to then buy from itunes again :-) I am now one very happy lady.
I apologise to all those that dont have older versions of OS X that maybe wont support even this upgrade but certainly for those like me with just 4yr old lap tops at least it means it not longer means buying a new one.
Hope this helps son very frustrated people like myself - so much for apple support! -
Hello i have a problem that i was making update IOS7 for my i phone 5 it's taking a lot of time about 4 hours till now, i can't use my phone know, it's appere logo i tunes only, can't do eny thing else like shutdown
Hey Andrew keriakous,
Thanks for the question. It sounds like your iPhone may be in recovery-mode. To resolve this issue, see the following:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
ORA-13207: incorrect use of the [More than 2D not supported] operator
Oracle 8.1.7.4:
The same query works in an Oracle DB on Linux and Windows, but in a Solaris it gives me the following error:
cc_redes_met_coaxial@ORAG2> SELECT lot_f.lot_id id,
ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
FROM lot_f,
pedestal_f,
G_GEOMETRY_0 lot_geom,
2 G_GEOMETRY_0 ped_geom
WHERE lot_f.feat_num = lot_geom.feat_num
3 AND pedestal_f.acc_point_id = 611
AND pedestal_f.feat_num = ped_geom.feat_num
4 AND lot_f.g_version+0 = 0
AND (lot_f.g_next_version > 0 OR lot_f.g_next_version IS NULL)
5 AND pedestal_f.g_version+0 = 0
6 AND (pedestal_f.g_next_version > 0 OR pedestal_f.g_next_version IS NULL)
AND MDSYS.SDO_WITHIN_DISTANCE(lot_geom.geometry, ped_geom.geometry,'distance = 100' ) = 'TRUE';
7 8 9 10 11 12 13 14 SELECT lot_f.lot_id id,
ERROR at line 1:
ORA-29902: error in executing ODCIIndexStart() routine
ORA-13207: incorrect use of the [More than 2D not supported] operator
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 84
ORA-06512: at line 1
The data is in 3D. I took a look at the trace file but no useful information. It does not have to be 2d, right?
I can use SDO_WITHIN_DISTANCE with data in 3d, can't I?
Does anyone know what is going on? Maybe a bug?
Regards,
AlexDaniel,
I created the spatial index in 2d, but if I collect stats on all tables the optimizer doesn't use the spatial index.
I tried to influence the optimizer using hints, but it seems to ignore the hint clause. The query I did is above:
SELECT /*+ INDEX(lot_geom G_GEOMETRY_0_SI) INDEX(ped_geom G_GEOMETRY_0_SI) */
lot_f.lot_id id,
ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
FROM lot_f,
pedestal_f,
G_GEOMETRY_0 lot_geom,
G_GEOMETRY_0 ped_geom
WHERE lot_f.feat_num = lot_geom.feat_num
AND pedestal_f.acc_point_id = 611
AND pedestal_f.feat_num = ped_geom.feat_num
AND lot_f.g_version+0 = 0
AND (lot_f.g_next_version > 0 OR lot_f.g_next_version IS NULL)
AND pedestal_f.g_version+0 = 0
AND (pedestal_f.g_next_version > 0 OR pedestal_f.g_next_version IS NULL)
AND MDSYS.SDO_WITHIN_DISTANCE(lot_geom.geometry, ped_geom.geometry,
'distance = 100' ) = 'TRUE';
So I "forced" a plan that uses the spatial indexes deleting the statistics from the tables that have geometry columns. The execution plan looks like this:
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=2652 Card=10182 Bytes=79969428)
1 0 CONCATENATION
2 1 NESTED LOOPS (Cost=876 Card=3428 Bytes=26923512)
3 2 NESTED LOOPS (Cost=121 Card=1078 Bytes=8450442)
4 3 NESTED LOOPS (Cost=4 Card=33 Bytes=129492)
5 4 TABLE ACCESS (FULL) OF 'PEDESTAL_F' (Cost=1 Card=1 Bytes=16)
6 4 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=3 Card=3268 Bytes=12771344)
7 6 INDEX (RANGE SCAN) OF 'G_GEOMETRY_0_PRIMARY' (UNIQUE) (Cost=2 Card=3268)
8 3 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=121 Card=3268 Bytes=12794220)
9 8 DOMAIN INDEX OF 'G_GEOMETRY_0_SI' (Cost=51)
10 2 TABLE ACCESS (BY INDEX ROWID) OF 'LOT_F' (Cost=1 Card=318 Bytes=4770)
11 10 INDEX (RANGE SCAN) OF 'GI_LOT_F0_FEAT_NUM_0' (UNIQUE) (Cost=1 Card=318)
12 1 NESTED LOOPS (Cost=876 Card=3428 Bytes=26923512)
13 12 NESTED LOOPS (Cost=121 Card=1078 Bytes=8450442)
14 13 NESTED LOOPS (Cost=4 Card=33 Bytes=129492)
15 14 TABLE ACCESS (FULL) OF 'PEDESTAL_F' (Cost=1 Card=1 Bytes=16)
16 14 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=3 Card=3268 Bytes=12771344)
17 16 INDEX (RANGE SCAN) OF 'G_GEOMETRY_0_PRIMARY' (UNIQUE) (Cost=2 Card=3268)
18 13 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=121 Card=3268 Bytes=12794220)
19 18 DOMAIN INDEX OF 'G_GEOMETRY_0_SI' (Cost=51)
20 12 TABLE ACCESS (BY INDEX ROWID) OF 'LOT_F' (Cost=1 Card=318 Bytes=4770)
21 20 INDEX (RANGE SCAN) OF 'GI_LOT_F0_FEAT_NUM_0' (UNIQUE) (Cost=1 Card=318)
But when I executed the query, I got:
cc_redes_met_coaxial@ORAG2> /
ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
ERROR at line 2:
ORA-03113: end-of-file on communication channel
Collecting stats on geometry tables makes the query work only because it doesn't use the spatial index.
I took a look the trace file, but I didn't see any interesting information. I can send you if you want.
Do you have any clue?
Regards,
Alex -
The new ibook app and ibook update is designed for iPhone 5 operating system. When my iPhone4 recently updated the ibook app, it created many problems using the ibook to download and read my books. Can I get the previous ibook app back on my phone.
Check your trash can on the desktop. The old version is automatically moved to the trashcan. You should be able to move it from the trashcan back to the Apps folder within the iTunes folder. The update that was pushed out was for iBooks to work with iOS 7 not iPhone 5. iOS 7 was released today.
Maybe you are looking for
-
Follow-up 1: Hmm! An issue ... u0093How to handle Forecasting when modeling
Any comment on my Summary: My understanding is that, in dealing with forecasting during modeling a) One approach will be to create a new Cube, infobjects for Forecast data in addition to the cube for the actual data. That makes it 2 Cubes. Advantage:
-
Windows update fails with error 0x800F0922 for KB2961072 on Windows 8.1 desktop
I just tried to install updates on my Dell desktop tower running Windows 8.1 Pro. The first time it said that updates did not succeed and that it had to roll them back. I started using computer and now that same update notification showed up again. I
-
Image adjustments variables is missing in my PS CS5 Extended
Hi, I'm working with PS CS5 extended, and I'm missing the option image>adjustments>variables. According to the information on the internet it should be there at the very same place that I'm used to finding it, but it seems to be missing at my version
-
What is exactly STATISTICS in SQL Server
hi all, What is exactly STATISTICS in SQL server query optimiser ? Thanks Selva
-
Hi there, I've no idea what the equivalent on a mac is for windows "ctrL" "alt" and "delete" when trying to access programs which have frozen. I'm trying to find "end now" ..hope you guys can help as I don't want to resort to rebooting..but the wee w