Problem with decision making

Hi All,
I have a customized subview which provides me the required tasks and for the same I have added two more columns for Approval and Rejection which are basically checkboxes.
I have a Submit button as well. Based on the selection of the check boxes I have to perform some action on click of the submit button.
Currently I am getting an error "This action is not valid for this item".And thus I am not able to achieve the requirement of decision making.
I request you all to share your experience so that I can proceed.
Regards
DK

Hi.
If I understand it correctly, the user will either perform the Accept action, or the Reject action.
So why dont you use a radio button group, instead of checkboxes. the given error will not occur.
With checkboxes, you will have 4 altenatives, not two.
Another alternative is using two buttons, which is also used in the workflow scenario. But this option depends on how you have planned your event handling.
regards,
Kshitij.

Similar Messages

  • Problem with Decision step execution

    Hi Friends,
    I have a problem with executing a decision step. When I execute the decision using SAP_WAPI_DECISION_COMPLETE the workitem goes to completed state and doesn't do anything after that. But when I execute the same step from SBWP the subsequent steps gets executed and rest all works fine. I am sure there is a problem with Decision step . The task I am using is TS00008267. Is there a replacement for this step or is there something to do with feature ADVANCE WITH DIALOG or agents .I have agents in place. Please help.
    -Rajesh

    when I write the decision using FM , the WI is set to completed but
    I am not sending any status to workflow container from the task container
    . Is this the issue for workflow not able to continue !
    There is no necessity of sending any result back to the workitem container. In the decision step container , it contains a standard container element WIResult it will populated based, on the decision you took on the workitem (IF it is a Decisionworkitem).
    when I execute the FM to write the decision, the task ( generic decision task)
    is not getting executed.
    Can you pelase  let us know what is the return code, th function module is retruning back, once you try to execute the workitem  by using the FM, if it is other than zero then can you please let us know what is the message.
    , Before trying to execute the workitem can you please check whether the workitem is stored in the standard workitem header table SWWWIHEAD. as the above function module will validate the workitem from the header table.....

  • Problem with DVD making.

    we have a problem with making DVD-files from Adobe Premiere Pro CC. We haven't Adobe Encore and can't it to download.

    Encore CS6 is available to Cloud members. You have to download and install Premiere Pro CS6 to get Encore CS6.
    http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html

  • Problem with decision

    Hello,
    I have a huge problem with my iPhone 5. After drop a loudspeaker(on the top) doesn't work, so I'm unable to talk with people. Also my front glass is broken, but it's not such a big problem. The question is should I try to sell iP5 and buy iP 5s or pay for service and make my dreams come true and buy a MacBook Air?
    In the moment I don't have a laptop, because I don't really need it. iPhone 5 has everything. 
    Sorry for all mistakes I live in Poland and I'm learning.

    Please create a new thread in the forum with your question and give more details in the message about your problem. Posting a different question inside a thread does not get visibility at the forum top level.
    -Marcos

  • Problem with photos making book in iPhoto

    I'm making a book on iPhoto and two of the pix indicate they have already been used, but they have not. Can't delete them (because there's a tick mark beside them) but can't use them either. Help?

    What is your iPhoto version?
    In iPhoto '11 you can use the same photo over and over again, even if it has a checkmark, that it has been used. For example - the same photo used six times:
    When you move the cursor directly onto the checkmark in the photos list, the checkmark will change into an arrow. If you click the arrow, it will take you to the page with the photo. Can you find this way, where the photo has been used?

  • JFrame.pack() causes problems with jtabbedpane(making new tabs)and resizing

    I have a JFrame with a JTabbedPane inside of it. Inside of each tab I put a JPanel with a JTextArea in it. When I create a new tab, I do something like textArea.requestFocusInWindow();
    However, this will not work unless I do a frame.pack() right after I created the new tab and right before that line of code.
    This in turn causes another problem. If I resize the jframe and then create a new tab, the window will snap back to the size it had before creating the tab. I assume this has to do with the pack() function, however nothing else I try will make the cursor blink in the JTextArea.
    Is there a solution to this...either something to make the cursor blink or something other than the pack function to update the JFrame?
    Thank you

    This posting should help you out:
    http://forum.java.sun.com/thread.jspa?forumID=57&threadID=581478

  • Problem with iMessage making me open a new screen when texting the same person.

    Just starting having this problem today.  Texting with one person using iMessage (iphone to iphone) and every time they respond to my text, it doesn't appear on the open screen conversation.... it appears as a new message from them.  I'm having to text them and then close my conversation and then reopen the text message to see what they said.  It's like having 20 people text you at the same time.
    Anyone else having this happen to them?

    yes, my imessage was set to go to my iphone number.  Same for the person that I was texting with. 
    It's working now.  As a last ditch effort, I checked to see how many apps I had running in the background. Needless to say, I had about 12 apps open.  I closed them all, and my imessage worked correctly after that..... one conversation.

  • Problem with Itunes making my computer freeze

    Hi there i've got a frustrating problem. Whenever I open Itunes, my mouse freezes and my computer takes a very long time to load itunes. If I leave the mouse alone, Itunes will seem to work fine, srcolling through the top banners without problems, but everything freezes whenever I move my mouse. this happens only when iTunes is open. What's the deal?
    Thanks, Zach

    Nevermind! i manually installed the update and the problem is gone.

  • Unique problem with validation/ making field required

    I have searched the forums trying to find a way to make a field required based on the users selection of a check box, or something else. So far, everything says use nullTest = "error".
    I have tried to do this and get the following results: The red highlighting, which shows up around my other required fields, will not show up unless you click in the text box and then out of it. Weird! Then, when pressing the submit button, it will not actually give you an error message if there is nothing in that text box, as it will if there is nothing in the fields that I originally make required.
    Any thoughts, or fixes would be greatly appreciated.
    Thanks in advance for any help.

    We do the same thing here. We haven't had any issues with the submit not validating the field correctly though. Our only issue was the red highlighting. To get around this, we would call resetdata on the field. resetData clears out the value of the field so you need to store it off and then reset it.
    if (form1.BP1.ChangeActivities.Pos1.Department==1) then $.validate.nullTest = "error" else $.validate.nullTest = "disabled"
    endif
    $=$
    var x = $
    xfa.host.resetData("form1.BP1.ChangeParticulars.Pos1To.DeptNo")
    $ = x

  • Has anyone experienced problems with outlook mail after ios6

    Starting with the release of iOS6 I have had a problem with mail making it to my desktop. I never had this problem before.  The mail arrives fine on my iPad and iPhone, but it's not in my ourlook inbox.  Any ideas?  I have the iPhone 4 and the original iPad.  I have checked the settings and the "mail" option is set to "on" on both devices.

    RobertRTillman wrote:
    1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
    2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
    3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
    4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
    In short, we are screwed and neither company seems to care.
    In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
    Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

  • Problems with overage charges and making account changes on line

    I have quite a bit of history involving my attempts to resolve the problem of catching my account before it goes over the minutes allowed and making the changes on line (to cut down on call volume) to change my account to raise the minutes allowed for that billing cycle.  I was given one reason why it didn't work the first time (I didn't print out my confimation proving I made the changes - bit the bullet and paid those charges) and so the second time wanting to avoid the problem from the first time I made sure I printed out my confirmation.  The confirmation had an effective date of change of 07/19/2012 the day I was informed I was nearing my allowed minutes.  There were only 4 or 5 maximum days left in that billing cycle so I wanted to nip the problem in the bud and make the changes to my account to be made "that" day.  My confirmation said the changes were effective 07/19/2012.  In plently of time before that billing cycle ended.  Again I was told I did something wrong.  This time I'm holding my confirmation in my hand even as the person is telling me again I did it wrong.  The purpose Verizon wants it's customers to use the available on-line option is to cut down on their call volume.  I didn't go to school to get the knowledge apparantly needed to perform these particular tasks in a manner that is acceptable to Verizon.  Has anyone else had problems with trying to fix their problems themselves using Verizons "helpfull" on-line choice?

    I have an explanation for you by what was meant by "you did it wrong."
    When you make a change effective the date you are requesting it and not at the start or end of your billing cycle, your minute usage for that month is pro-rated.
    For example, you say you made a change, because you were nearing your allowance limit, on 7/19/2012 and wanted it effective that day with 5 days left in the billing cycle. Lets assume that your allowance is 700 minutes/month and you were at 675 minutes for that month(still under your monthly allowance). If you make a change effective with 5 days left in your billing cycle to the 1400 minute/month allowance, your allowance for the 1st 25 days of your cycle will have been pro-rated to (25/30) * 700 = 583 minutes. This would mean you would have already had an overage of 92 minutes for the 1st 25 days of the month. Additionally, you would have a pro-rated allowance to use the last 5 days of (5/30) * 1400 = 233 minutes. This is how the pro-rating works when you make a change effective during the middle of your billing cycle.
    What you need to do next time to avoid these overage charges is to make the change effective at the beginning of your current billing cycle. So if you had made the change on 7/19/2012, but your billing cycle ended on 7/24/2012(5 days later), you should have made the change effective at the beginning of your current billing cycle, or 6/24/2012. This is called backdating the change. In this instance, you would have received a credit on you account for the cost of the 700 minute plan and been charged the full amount for the 1400 minute plan on your next bill, which I believe is a net additional charge of $10 and you would have had the use of 1400 minutes for throughout the entire month. In this example, you would not have had any overage with your 675 minutes during the 1st 25 days of your cycle and would have been able to use 725 minutes over the last 5 days of your billing cycle. This is much better than the overage charge you would receive with 92 overage minutes @ $0.45/minute = $41.40.
    I hope this explains it.

  • HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

    Hi folks,
    i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
    Can any one help me in this regard??

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

  • HT1694 I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

    I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

    bump? Is bumping allowed? Lol.
    I just really need some help here.

  • When I make a project in iDVD'09, there are sometimes green blocs with points flickering in some scenes of my iMovie-film. In iMovie there is no problem with this film, but the problem begins by exporting to iDVD and making a project there.

    When I make a project in iDVD'09, there are sometimes - at voluntary moments - green blocs with points flickering in some scenes of my iMovie-film.
    In i-Movie there is no problem with  this film, but the problem begins by exporting to iDVD and making there a project.
    Who can help me, then I cann't find everything about this in any forum?

    Hi
    Can be a problem that get multiplied and visible when iDVD encode for DVD.
    A. See if problem can be isolated to a single frame in the movie and re-import this clip and see if it's better
    B. When free space on Start-Up hard disk goes low - strange things like this might occure. I never go under 25Gb free space on this Start-Up Mac OS hard disk !
    C. Does this problem arises what ever encoding quality You use ?
    Yours Bengt W

  • PROBLEM WITH MAKING RECTANGLE

    i have a problem with illustrator cs6.. before this i've tried cs5..but when i use cs6 i have a problem when making a rectangle..when i make rectangle let say 3cm x 3cm without border i mean stroke i got the exact size but then when i use border only i mean stroke only without feel with the same box the size change into 3.0555 not 3 cm anymore..so is there anything that i missed tick out in ai cs6? reply me asap...

    Could be that "use preview bounds" is turned on in the preferences. Here is the same rectangle with that preference off (left), and on (right).
    The rectangle was not changed in any way between these two screen shots; just the preference.

Maybe you are looking for