Problem using Hotmail with Mail

I recently installed leopard and configured a hotmail account to use with mail, but the problem is that every time I open Mail, it downloads all the emails from the account, and even if I delete them or mark them as read, the next time I open mail, they'll show up again, and it's very annoying. Any solution other than deleting all the emails on the hotmail account??
Thanks

P.S. I just noticed another issue here: everytime I receive a message in my hotmail account, it shows up twice in Mail. The first problem is more important, but this one's annoying too..Any clue?

Similar Messages

Can I use Hotmail with Mail?

The title pretty much says it all, and if I can use Hotmail with it, how do I set up mail to do so? Thanks in advance.
Daniel

How long have you had this Hotmail account?
Since I've never had a Hotmail account and never will, I'm not sure but I believe when Microslop made the subscription change which restricted accessing a free Hotmail account with any email client such as the Mail.app, existing free Hotmail accounts at the time the change was made were not affected.
If your Hotmail account was recently created, you must have a paid Hotmail account in order to access it with any email client.
Why bother with Microslop anyway?
You can get a free Gmail account, enable POP forwarding via the Gmail account preferences with webmail access which provides for accessing a Gmail account as a POP type account with the Mail.app.
http://mail.google.com/mail/help/intl/en/about.html

Using Hotmail with Mail?

Hi
is it possible to re-route Hotmail into the Mail program? I would prefer to do this than use an '@mac' address, but the Mail program is nicer to use . If this is possible, how would I go about doing this?
thanks
Josh

Thanks very much! The plug in was very helpful, however now a message pops up saying that i need to subscribe to hotmail. Fair enough, I followed the link but there doesn't seem to be anything extra i can subscribe to!!! I cannot buy any additional account bonuses.
However, windows is now running Live now so instead of hotmail. Could this possibly be part of the problem?
Any support would be great.
Thanks
Josh

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

Viewing folders using Hotmail in Mail?

I'm using Hotmail in Mail and can only see Inbox, Sent and Junk folders.
How do I see all my mailbox folders?
Thank you
(NB not sure if this is in the correct forum?).

I was trying to find something on it, but I cant get into the account anymore, I deleted my hotmail account after I signed up with Gmail.
~BUT, if it is the same, I would log onto Gmail, and then went to the Mail Settings, and they had a list of options of what you could push to your other email devices.
Hope its the same for hotmail!

Problem Using Multiple With Statements

I'm having a problem using multiple WITH statements. Oracle seems to be expecting a SELECT statement after the first one. I need two in order to reference stuff from the second one in another query.
Here's my code:
<code>
WITH calculate_terms AS (SELECT robinst_current_term_code,
CASE
WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '40'
WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '100'
END first_term,
CASE
WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '100'
WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '160'
END second_term
FROM robinst
WHERE robinst_aidy_code = :aidy)
/*Use terms from calculate_terms to generate attendance periods*/
WITH gen_attn_terms AS
SELECT
CASE
WHEN first_term LIKE '%60' THEN 'Fall '||substr(first_term,0,4)
WHEN first_term LIKE '%20' THEN 'Spring '||substr(first_term,0,4)
END first_attn_period,
CASE
WHEN second_term LIKE '%60' THEN 'Fall '||substr(second_term,0,4)
WHEN second_term LIKE '%20' THEN 'Spring '||substr(second_term,0,4)
END second_attn_period
FROM calculate_terms
SELECT *
FROM gen_attn_terms
<code>
I get ORA-00928: missing SELECT keyword error. What could be the problem?

You can just separate them with a comma:
WITH calculate_terms AS (SELECT robinst_current_term_code,
CASE
WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '40'
WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '100'
END first_term,
CASE
WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '100'
WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '160'
END second_term
FROM robinst
WHERE robinst_aidy_code = :aidy),
/*Use terms from calculate_terms to generate attendance periods*/
gen_attn_terms AS
SELECT
CASE
WHEN first_term LIKE '%60' THEN 'Fall '||substr(first_term,0,4)
WHEN first_term LIKE '%20' THEN 'Spring '||substr(first_term,0,4)
END first_attn_period,
CASE
WHEN second_term LIKE '%60' THEN 'Fall '||substr(second_term,0,4)
WHEN second_term LIKE '%20' THEN 'Spring '||substr(second_term,0,4)
END second_attn_period
FROM calculate_terms
)Not tested because there are no scripts.

Problem using Toplink with JUnit

Hi,
I have a problem using Toplink with JUnit. Method under test is very simple: it use a static EntityManager object to open a transaction and persists data to db. When I invoke the method from a test method, it gives me the exception:
java.lang.AssertionError
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.computePURootURL(PersistenceUnitProcessor.java:248)
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.findPersistenceArchives(PersistenceUnitProcessor.java:232)
     at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.findPersistenceArchives(PersistenceUnitProcessor.java:216)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initialize(JavaSECMPInitializer.java:239)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initializeFromMain(JavaSECMPInitializer.java:278)
     at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.getJavaSECMPInitializer(JavaSECMPInitializer.java:81)
     at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.createEntityManagerFactory(EntityManagerFactoryProvider.java:119)
     at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:83)
     at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:60)
     at it.valerio.electromanager.model.EntityFacade.<clinit>(EntityFacade.java:12)
     at it.valerio.electromanager.business.ClienteBiz.insertIntoDatabase(ClienteBiz.java:36)
     at it.valerio.electromanager.test.model.ClienteTest.insertDBTest(ClienteTest.java:30)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.junit.internal.runners.TestMethodRunner.executeMethodBody(TestMethodRunner.java:99)
     at org.junit.internal.runners.TestMethodRunner.runUnprotected(TestMethodRunner.java:81)
     at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
     at org.junit.internal.runners.TestMethodRunner.runMethod(TestMethodRunner.java:75)
     at org.junit.internal.runners.TestMethodRunner.run(TestMethodRunner.java:45)
     at org.junit.internal.runners.TestClassMethodsRunner.invokeTestMethod(TestClassMethodsRunner.java:66)
     at org.junit.internal.runners.TestClassMethodsRunner.run(TestClassMethodsRunner.java:35)
     at org.junit.internal.runners.TestClassRunner$1.runUnprotected(TestClassRunner.java:42)
     at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
     at org.junit.internal.runners.TestClassRunner.run(TestClassRunner.java:52)
     at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:38)
     at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)
Where is the problem???
Regards,
Valerio

EntityFacade class is very simple and it uses a static EntityManager object. Here the code:
public class EntityFacade {
     private static EntityManager em = Persistence.createEntityManagerFactory("ElectroManager").createEntityManager();
     private static Logger logger=Logger.getLogger(EntityFacade.class);
     public static void insertCliente(Cliente c)
          logger.debug("Inserisco cliente nel db: " + c);
          em.getTransaction().begin();
          c.setId(getNextIdForTable("Cliente"));
          em.persist(c);
          em.getTransaction().commit();
If I call the method from inside a main it works well, so I think the problem is not the classpath neither the URL in the persistence.xml. However the URL is:
<property name="toplink.jdbc.url" value="jdbc:derby:c:/programmi/ElectroManager/db/electroManager"/>
I use the latest build version of TopLink.
Thanks.

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

Hi .
Apple no longer supports Safari for Windows if that's what you are asking > Apple apparently kills Windows PC support in Safari 6.0
Microsoft has not written IE for Safari for many years.

Problem using ViewObject with bc4j:table

Hello !!
This is the query of my ViewObject:
select * from speiseplan order by jahr desc, kw desc;
and everything works fine in the BC4J tester:
jahr kw
2003 52
2003 7
2003 3
2002 51
But in my uix page the rows are not correctly sorted:
jahr kw
2003 3
2003 7
2003 52
2002 51
What's going wrong here?
Thanks for your help.
Regards,
Mareike

Duplicate post.
Original problem using ViewObject with <bc4j:table>

Do you know any tips on using Automator with Mail?

Do you know any tips on using Automator with Mail?
I want to save time, can you help. I get hundreds of mail everyday, iPhone, MacBook, Desktops....
This is very time consuming
HELP!!!

Perhaps we could answer the question better if we knoe what functions were taking up the most time. Are you having to delete spam that slipped through the craks? Moving Mail to folders can be accomplished through mail rules.

Problems using iCloud with Mountain Lion on iMac8,1

problems using iCloud with Mountain Lion on iMac8,1 - about 5J old - iMac gets slower and slower - total free memory is used in some minutes - no more reaction on input

Download > http://codykrieger.com/gfxCardStatus Open it and select Integrated Only. It's a bug with NVIDIA graphic cards

Using hotmail for mail

i have been trying to use my hotmail for my mail account. i have downloaded the program but still having problems. when i try to send an email i get a message that says "cannot send message using the server services.msn.com". i have tried to change this but it still reverts back to it. any help would be appreciated.

I think you need a Hotmail plug-in for it to work with Mail, try do a search in VersionTracker
Cheers

Sending hotmail with mail

I just got my macbook a couple of days ago and am having trouble setting up my hotmail account with the mail program. I've had hotmail for a long time and have never had any trouble setting it up with outlook express. Here's my problem so far. I can get email to come in, but when I try to send an email, the program says my email address was " rejected by the server smtp.live.com." I have the outgoing server set to use the default ports and I have ssl set to on and authentication set to off. If I try to turn authentication to password, and enter my email address and password, it won't log onto the server at all.
Has anybody run into this before and found a solution?

It's been a long time since I've had to set things up so my information might be old, but when I bought my macbook, it wasn't possible to directly download hotmail into Mail. Of course you can do it with Outlook - they are the same company! The workaround I use is to forward my hotmail to my Gmail account, and set up Mail to accept Gmail, which is easy. I can use either Gmail or hotmail as my reply to address. There may be another way now, but this has worked well for me. Good luck!

USING HOTMAIL IN "Mail"?

I was wondering if it was possible to use a free online internet account (like hotmail) but using the mac "mail" interface? When I tried to set up an account on "mail", i was asked confusing questions about what "server" my mail was on. Thanks in advance for any help, correct me if i am wrong.

Hi golfromeo
The trouble with many free mail providers, including Hotmail and Yahoo, is that they don't use the POP standard which would allow you to interface with client email programs such as Apple Mail. Both the paid Yahoo Plus, and the free GMail, both use POP, and their help pages will aid you in configuring Mail for their accounts.
One way to work with Hotmail is to use MacFreePOPs. You have to have this utility running all the time, but it seems to work well for a couple of clients I've recommended it to.
Matt

Problems using Hotmail and Twitter in Firefox

I'm having problems using both Hotmail and Twitter in Firefox (and Google Chrome) but they both seem to work fine in Internet Explorer. I can log-in to both sites but in Hotmail the drop-down menus and links don't work, and in Twitter the stream does not appear at all.
I've tried everything: deleted cache, history, cookies, disabled add-ons etc... I've also tried re-installing both new and older versions of Firefox and I've still had no joy. If anybody has any ideas for a fix I'd really appreciate it. I can't stand using IE but I am forced to at the moment.

My problem with Firefox & yahoo seems similar - so you are not alone.

Problem using Hotmail with Mail

Similar Messages

Maybe you are looking for