Problem using stored procedure to populate table for report
I have a report that in one instance the user wants the quantity data pulled from a smaller subset of data. My thought was to create a global temporary table and then use a stored procedure to populate this table then pass the table name in a lexical that contains the table name. So my query in the report stays the same except for the lexical table name. This all seems to work except for the procedure populating the table. I thought it might be the global temporary table so I created a real table. When I run the procedure from the command prompt the table gets populated. When I run the procedure in the before report trigger I get nothing. When I run the procedure from the command line and leave the data, then run the report I get updated data in the table, but nothing returned to the report. Any ideas, questions, solutions?
Thanks
Andy Hendrickson
Hi Andy Hendrickson,
Let me understand your problem correctly.
1) When you run the procedure from command prompt the table gets populated. It is clear.
2)When you run the procedure in before report trigger you get nothing. Let us analyze why but for now it is clear.
3) What you mean by "I run the procedure from the command line and leave the data, then run the report I get updated data in the table, but nothing returned to the report."
Can you please explain a bit more and also update code snippets of what you are using ?
Thanks,
Vinod
Oracle Reports Team
Similar Messages
-
Crystal report ReportPageViewer problem using Stored Procedure
Hi,
I'm using the ReportPageViewer component in my jsf page, to visualize cystal reports on my web application.
Everything is working fine when my crystal report queries a table. But, for performances issues, we've changed this to use a stored procedure.
However, when trying to run the report from my jsf pages, I obtained the following error:
The QE parameter ''{0}'' could not be found.
The parameters are exactly the same as before. I can see in the Reportsource that I'm passing to the ReportPageviewer that all the parameters are set with the proper values.
When running the report from crystal report, I obatin the results, using the same database login/password than my web application.
Any help would be really appreciated!
Thanks,
M�lanieHi Andy Hendrickson,
Let me understand your problem correctly.
1) When you run the procedure from command prompt the table gets populated. It is clear.
2)When you run the procedure in before report trigger you get nothing. Let us analyze why but for now it is clear.
3) What you mean by "I run the procedure from the command line and leave the data, then run the report I get updated data in the table, but nothing returned to the report."
Can you please explain a bit more and also update code snippets of what you are using ?
Thanks,
Vinod
Oracle Reports Team -
Problem using stored procedure
Hi!
I' ve created an application front end with java and a back end with SQL. In SQL I' ve created a stored procedure:-
CREATE PROCEDURE insertData @cus_name varchar(45),@cus_addr varcahr(60),cus_phone varchar(15)
as
[ SQL Statements ]
[ SQL Statements ]
[ SQL Statements ]
[ SQL Statements ]
Now, as in SQL, if I have to execute this stored procedure I should use the following command:-
EXECUTE insertData [ value1 ],[ value2 ],[ value3 ]
But, I want this stored procedure to be executed from my java application through a prepared statement and its parameter values would be entered at the runtime by the user using the front end.
I failed to do that ! Help me .....!Thanks for your suggestion jschell !
I did not know that a stored procedure could not be
executed using a prepared statement. I didn't say that. They can in fact be run that way.
However normally a CallableStatement is used and most of the time it should be used.
The syntax for a PreparedStatement depends on the driver/database however. Whereas the syntax for CallableStatement is standard.
Now , if you send me a short code that explains how
to execute a stored procedure using callable
statement would be a great job.
Bye...!See the tutorial, the javadocs, and probably the docs for the driver you are using as well. -
Stored Procedure to create table for PdO Change Log
Hi Experts,
I have read in the forums that the only way to get a Change Log was to create a Stored Prodedure and create a new Table that is populated with the Change when ever a User update a Production Order.
I started on this Stored Procedure and have hit a wall on a error. I'm fairly new to queries...
Here is what I have so far:
if((@transaction_type = 'U')and(@object_type = '202'))
BEGIN
set @PdO = case @object_type
INSERT INTO ChangeLogPdO2 (DocEntry, Status, ItemCode, PlannedQty, DueDate)
SELECT T0.DocEntry, T0.Status, T0.ItemCode, T0.PlannedQty, T0.DueDate
FROM OWOR T0
WHERE T0.DocEntry = @list_of_cols_val_tab_del
END
if(@PdO = 'true')
begin
select @error = 1
select @error_message = N'My Error message'
end
I plan to add more columns, but only started with these. Also how do I put a time stamp on this?
Thanks,
Marli
Edited by: Marli Schutte on Feb 3, 2010 7:09 PMGordon,
I created a new UDT named CLPdO.
Then I did as you suggested and I get the error message 'Incorrect syntax near the keyword 'INSERT''.
Here is how the Sotred Procedure now look:
[code}
if((@transaction_type = 'U')and(@object_type = '202'))
BEGIN
set @PdO = case @object_type
INSERT INTO dbo@CLPdO (DocEntry, Status, ItemCode, PlannedQty, DueDate)
SELECT T0.DocEntry, T0.Status, T0.ItemCode, T0.PlannedQty, T0.DueDate
FROM OWOR T0
WHERE T0.DocEntry = @list_of_cols_val_tab_del
END
if(@PdO = 'true')
begin
select @error = 1
select @error_message = N'My Error message'
end
Any help will be appreciated.
Marli -
Sub report using Stored Procedure returns incorrect data
Post Author: rikleo2001
CA Forum: Data Connectivity and SQL
Guys,
I am using CR 9 in ASP.net application.
One simple report and one Sub report, sub report is basically linked with Stored procedure accepting one parameter and returns a select query.
Main report is linked with that sub report using that parameter field.
Sub report is on demand sub report.
Now when I execute that main report and click on on demand sub report I am getting Wrong order information.
Here is out put on main report
Order 1 on demandDetail
Order 2 on demandDetail
Order 3 on demandDetail
NOW If I click on Order 3 (On demanddetail link, it displays rondom order details, some time correct on too), I am really stuck and don't know where I am going wrong.
Please help me to solve this issues.
Many ThanksPost Author: rikleo2001
CA Forum: Data Connectivity and SQL
Hi Yangster,
Thank you so much for your reply.
On DEMAND Sub report is located in main report, IN DETAIL SECTION
I am passing Order ID from main report linked to {?morderid} in subreport under command object, and if I run it in design mode, it works perfectly alright, so problem is isolated to ASP.NET and Crystal report post back method on Crystal report.
The example I give to you this is a simple example to identify issues in my real application and report.
My main report contains summary of data base on unique identifier. that summary have 4 differant types of details which has to be on the same report (as Crystal report doesn't provide Nested subreport), so I decided to use 4 subreports on main report and all subreport using Stored procedure command object.(Sub report has it own complex processing requirement to fulfill).
Please help me with any further ideas? for the sample which I presented to you this is only using one SP on main report with a simple processing.
Many Thanks -
Problem while creating table dynamically using stored procedure
Hi all
When i try to execute the following lines get insufficient privilege error.
FYI: i m able to create table statically.(i.e without using stored procedure)
CREATE OR REPLACE PROCEDURE pcalling IS
str varchar2(60);
BEGIN
str:='create table t15(tno number,tname varchar2(5))';
execute immediate str;
END;
Thanks in advance
Satyahi
SQL> CREATE OR REPLACE PROCEDURE runddl (ddl_in in VARCHAR2)
2 AUTHID CURRENT_USER
3 IS
4 BEGIN
5 EXECUTE IMMEDIATE ddl_in;
6 END;
7 .
SQL> /
Procedure created.AUTHID CURRENT_USER clause before the IS keyword which runddl executes, it should run under the authority of the invoker, or current user not the authority of the definer.
if you omit it then it will no longer will be run if the creator doesnt have privelege to run this ddl regardless invoker has or not.
i hope you got it
Khurram Siddiqui
[email protected] -
Best approach for performing DMLs using stored procedures
Hi,
I have a really general question and would like to hear your say about this.
I want my application to manipulate or read data using stored procedures (or packages in that manner) and not directly using queries against the DB.
Let's say I have a table with many columns:
create table test (pkid number(10),col1 varchar2(30), col2 number(10), col3 date,...);For such a DML procedure, is it best to do something like
procedure do_update(i_pkid IN number,i_col1 IN varchar2, i_col2 IN number, i_col3 IN date,...) as
begin
update test
set col1=i_col1,
col2=i_col2,
col3=i_col3...
where pkid=i_pkid;
commit;
end;Or do a selective update, meaning update only a certain column every time, given only 1 column actually changes? (and how to do that - separate procedures for each column? [columns can be nulls])
Also, is it better to work with test.col1%type instead of specifying the data type in the procedure?
And one last question - If I have a table with 100 columns and I don't want to create a procedure with 100 parameters - the best approach would be to use a record?
I just need to be set on the way I start implementing things in order to do it well from the start.
Many thanks.
Edited by: Pyrocks on Nov 17, 2010 1:58 PMPyrocks wrote:
One last clarification (although it may be more related to c/c++ developers - maybe one of you will know):
We are working with C++ and VB against a SQLServer and my part is to translate all the existing procedures to Oracle in order to migrate the application to work with Oracle DB.
The existing procedures use an IN parameter for each column in the table and I would really like to use rowtype like you mentioned.
Since I'm not a c/c++/vb developer - is there an easy way of working with such types, or even User-Defined Types, from c/c++/vb (as in passing a rowtype record from c++ to a SP ?)
I'm not looking for the actual way - just want to know how hard it would be and how much code needs to be changed in order to be able to convince the developers that this is the RIGHT way to work.
PS. none of our developers have experience with ORACLE so they wouldn't know the answer...Not actually an Oracle server-side (SQL language or PL/SQL language) question - but a client one. And it has been a long time since I wrote a fat client using C/C++ or Delphi.
The OCI (<i>Oracle Call Interface</i>) supports advance (user defined) SQL data types. Has since Oracle 8i. So in that respect, yes the client can support custom SQL data types.
How well it does depends entirely on that client language's features wrt OCI integration. For example, Delphi 4 was release around Oracle 8i and supported custom SQL types. I would expect that most languages today (like Java and C#) will provide support for it.
As for usiong +%ROWTYPE+ - this is a PL/SQL clause as far as I know. Unsure whether it is supported by the OCI. What could support it is a pre-compiler like Pro*C. These enable you to mix pseudo SQL source code with client language source code. The pre-compilation step then replaces the pseudo SQL code with native client language calls to the OCI. The code is then compiled by that client language's compiler. Pre-compilers can pull all kinds of interesting "tricks" with their pseudo SQL code support.
The best would be to consult the applicable client language's manuals that describe the interface it supports (via OCI) to Oracle. -
SSRS adhoc (2005/2008) - Need to create Report Model (.smdl file) for adhoc using Stored procedure
Hi All,
I need to create Report Models using stored procedures. But whenever I am going to create data sources for same, I am just getting tables and views to use. Please see the screenshot below:
Is there any way out to create data source based on stored procedure? Please help.
Thanks in Advance
Regards
KumudHi Kumud,
As per my understanding, it is not support to create a Datasource View (DSV) using stored procedures.
In a DataSource View, only views, tables or named queries can be used. We can use stored procedures in a query. No parameterized queries, parameterized stored procedures or parameterized UDFs can be used in a DSV named query. You can try to using below approach
to achieve what you are require:
To build views in our relational source and add the views to the datasource view to proceed with modelling.
There is a similar issue, you can refer to it.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/22207c21-03c7-4e5a-bb67-0372f29220a3/sql-server-reporting-services-2008-creating-report-models-using-stored-procedures
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
How to use stored procedure in crystal report for eclipse
Hi;
I am working on crystal report for eclipse 2.0 and trying to use stored procedure in report .It is created from Oracle but it is not showing any dependencies
CREATE OR REPLACE procedure ACT_DB.getCostTransferDetails
p_In_Contract_ID varchar2 DEFAULT '*',
p_In_Status_ID varchar2 DEFAULT '*',
p_In_COST_TRAN_DATE varchar2 DEFAULT '*',
p_In_DEPT_ID varchar2 DEFAULT '*',
p_In_PROJECT_ID varchar2 DEFAULT '*',
p_In_EMPLOYEE_ID varchar2 DEFAULT '*',
p_Out_CostTransfer_Cusor OUT COST_TRANSFER_PACKAGE.COST_TRANSFER_TYPE
AS
BEGIN
OPEN p_Out_CostTransfer_Cusor FOR
SELECT
header.cost_tran_id,
header.cost_tran_date,
header.total_credit_amount,
header.total_debit_amount,
header.transfer_status,
header.updated_by,
header.added_by,
header.trf_over_ninety_days,
header.business_unit_id,
header.equip_approval,
header.batch_desc,
details.opr_unit_id,
status.status_id,
details.fund_code_id,
details.prgm_code_id,
details.class_id,
details.activity_id,
details.product_id,
details.status_id,
details.transaction_amount,
details.jrnl_date,
details.adjust_prcnt,
details.adjust_amnt,
details.details_equip_approval,
details.detail_desc,
details.account_id,
details.project_id,
details.dept_id,
details.contract_id,
details.reason_code_id,
details.jrnl_id,
employee.f_name,
employee.l_name,
employee.employee_id,
project.project_id,
project.project_status,
--header.transfer_status,
contracts.contract_desc
FROM header, details, status, employee, department, project, contracts
WHERE (header.cost_tran_id = details.cost_tran_id)
AND (header.cost_tran_date = details.cost_tran_date)
AND (header.transfer_status = status.status_id)
AND (department.dept_id = details.dept_id)
AND (department.dept_id = employee.dept_id)
AND (project.project_id = details.project_id)
AND (contracts.contract_id = details.contract_id)
AND (details.Contract_ID = p_In_Contract_ID OR p_In_Contract_ID ='*' )
AND (header.TRANSFER_STATUS = p_In_Status_ID OR p_In_Status_ID ='*' )
AND (TO_CHAR(details.COST_TRAN_DATE, 'MM/DD/YYYY') = p_In_COST_TRAN_DATE OR p_In_COST_TRAN_DATE ='*' )
AND (details.DEPT_ID = p_In_DEPT_ID OR p_In_DEPT_ID ='*' )
AND (details.PROJECT_ID = p_In_PROJECT_ID OR p_In_PROJECT_ID ='*' )
AND (header.ADDED_BY = p_In_EMPLOYEE_ID OR '*'=p_In_EMPLOYEE_ID )
Can any another way to make procedure
Thanx
Regards ,
AmolHi Amol,
Are you able to execute your stored procedure from oracle?.
- If "Yes" then use the Crystal Report XIR2 Designer to create the report.
- Import this report in the Crystal Report For Eclipse Workbench.
- The latest version for Crystal Report For Eclipse is SP1.
Please let me know the results.
Thanks,
Neeraj -
Using stored procedures for insert, update and delete
Hello all;
We have a question from our customer (who is the DBA), who has not in the past used TopLink, about whether it makes sense to tie TopLink into existing stored procedures to save and retrieve informations.
Is it possible?
Is there any circumstance under which it is a good idea?
ThanksIn TopLink any operation for which TopLink generates SQL, can be replaced by custom SQL, or a stored procedure call.
Custom SQL or stored procedures can be used for each of the descriptor's CRUD operations, but also for mapping queries and named queries. The Mapping Workbench only supports defining custom SQL for the descriptor CRUD operations and named queries, so many of the stored procedures call from the descriptor and mappings will need to be done through amendment methods.
Whether it makes sense or not depends on the application and the company and their requirements. It will add significant overhead to the development process to have to define and maintain all of the stored procedures, and the stored procedure calls in the descriptors. You may wish develop your application using TopLink generated SQL, and once you have the model and queries stabilized then switch to using stored procedures.
Whether it is a good idea depends on the application and the company and their requirements. Stored procedures may give the DBA more freedom to change the data-model once in production, and may allow for adding database-level security checks. In general using stored procedures will not improve performance if the procedures contain the same SQL that would have be executed anyway, but they may allow for the DBA to tune the SQL better. -
How to use Stored Procedure Call in Sender JDBC adapter
Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
XierHi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !! -
Problem with stored procedure in DB2
Hi,
Rigth now im havin a little problem trying to CALL a DB2 SP
I have a DB2 SP, something like this:
CREATE PROCEDURE ordenes.XXMOR_GuardaEncabezado
in p_ORDID INTEGER,
in p_ADVID CHAR (6),
in p_ACCTHDRID CHAR (6),
in p_STNID CHAR (6),
in p_ORDTYP SMALLINT,
in p_STRDT varchar(10),
in p_EDT char(10),
in p_MCONTID CHAR (16),
in p_AGYESTNUM CHAR (20),
IN p_PRDID1 CHAR(4),
in p_RTCRD CHAR (6),
in p_USRFLD1 CHAR (6),
in p_USRFL10 SMALLINT,
in p_TOTSPTORD INTEGER,
in p_CMT char(136),
in p_ROTID CHAR(20),
in p_Aux1 varchar(15),
in p_Aux2 varchar(15),
in p_Aux3 varchar(15),
in p_Aux4 varchar(15),
in p_Aux5 varchar(15),
out o_ORDID varchar(15)
And i calling the SP from my AppModuleImpl java class like this:
getDBTransaction().createStatement(0).getConnection().prepareCall("CALL ordenes.XXMOR_Ords(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)");
i am using this convention to pass the parameters:
Integer = setInt
Smallint = setShort
Char and Varchar = setString
and getString for the output:
But i only recibe this exception everytime i try to run the SP: java.sql.SQLException: Parameter type not valid.
Can anyone help me ! ?
Ty, regards from Mexico.I am using Stored procedure and that is working fine in Oracle
This is my XI Request structure :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:read_PROC_GET_ACTIVE_ESIIDS xmlns:ns0="http://reliant.com/xi/BMFR2">
- <statement>
- <PROC_GET_ACTIVE_ESIIDS action="EXECUTE">
<table>TCS.PKG_BMF_MANAGE_SERVICE_DATA.PROC_GET_ACTIVE_MF_ESIIDS</table>
<in_bmf_partner_id isInput="true" type="VARCHAR">994</in_bmf_partner_id>
<in_esids isInput="true" type="CLOB">1008901001155950587100:1008901001155950545100:1008901001155950671100:1008901001155950114100</in_esids>
</PROC_GET_ACTIVE_ESIIDS>
</statement>
</ns0:read_PROC_GET_ACTIVE_ESIIDS>
This is oracle Stored procedure signature :
PROCEDURE PROC_GET_ACTIVE_ESIIDS
in_bmf_partner_id IN kss_activity_stg_curr_stat.BMF_PARTNER_ID%TYPE,
in_esids IN CLOB,
out_recordset OUT sys_refcursor
Let me know if you need any further information.
Thanks,
Hetal -
XI/PI: jdbc receiver using stored procedure with arrays
The company needs an interface to search for header data and detail to a legacy system.
This interface from ERP to legacy system is synchronous and uses stored procedure.
The definition of the stored procedure is as follows:
PROCEDURE
Generar_Detalle_Vtas_Pagadas
(p_cvendedor IN bdc_vendedores.cvendedor%TYPE,
p_fdesde IN DATE,
p_fhasta IN DATE,
v_encabezado_ct OUT encabezado_ct,
v_detalle_vtas_pagadas_ct OUT detalle_vtas_pagadas_ct,
err_num OUT NUMBER
Data types used in stored procedure:
TYPE encabezado_ct AS OBJECT
( CREGION NUMBER(22),
XREGION VARCHAR2(50),
CMERCADO NUMBER(22),
XMERCADO VARCHAR2(50),
CTVENDEDOR VARCHAR2(5),
XCTVENDEDOR VARCHAR2(50),
XDENOMINACION VARCHAR2(15))
TYPE detalle_vtas_pagadas_ct AS OBJECT
( CITEM VARCHAR2(10),
XIDENTIFICADOR VARCHAR2(15),
XCONTRATO VARCHAR2(15),
XVALOR VARCHAR2(30),
CCUENTA VARCHAR2(15),
FACTIVACION DATE,
XDOMINIO VARCHAR2(30),
CCED VARCHAR2(20),
XCLIENTE VARCHAR2(161),
CCPO VARCHAR2(60) )
As shown, this has three input parameters varchar and date respectively and has three output parameters, two of which are defined with a data
type such as table and the other number.
The problem is to define the signature of the stored procedure in XI when defining the data type request, the message type and mapping system
legacy because the data type is not supported (tables: detalle_vtas_pagadas_ct,encabezado_ct )FORM 2:
defined as an array, but the error tells me that we need to define the attribute either input or output
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VtasPagadas_VYC xmlns:ns0="urn:VentasPagadas:VE_ALTASDEDCALIDAD_SD_VYC">
<VtasPagadasRequest><Generar_Detalle_Vtas_Pagadas action="EXECUTE">
<table>vyc.Vyc_Pack_Reportes_Sap.Generar_Detalle_Vtas_Pagadas</table>
<p_cvendedor type="VARCHAR"></p_cvendedor>
<p_fdesde type="DATE"></p_fdesde>
<p_fhasta type="DATE"></p_fhasta>
<v_encabezado_ct>
<CREGION isOutput="1" type="NUMERIC">X</CREGION>
<XREGION isOutput="1" type="VARCHAR">X</XREGION>
<CMERCADO isOutput="1" type="NUMERIC">X</CMERCADO>
<XMERCADO isOutput="1" type="VARCHAR">X</XMERCADO>
<CTVENDEDOR isOutput="1" type="VARCHAR">X</CTVENDEDOR>
<XCTVENDEDOR isOutput="1" type="VARCHAR">X</XCTVENDEDOR>
<XDENOMINACION isOutput="1" type="VARCHAR">X</XDENOMINACION>
</v_encabezado_ct>
<v_detalle_vtas_pagadas_ct>
<CITEM isOutput="1" type="VARCHAR">X</CITEM>
<XIDENTIFICADOR isOutput="1" type="VARCHAR">X</XIDENTIFICADOR>
<XCONTRATO isOutput="1" type="VARCHAR">X</XCONTRATO>
<XVALOR type="VARCHAR">X</XVALOR>
<CCUENTA isOutput="1" type="VARCHAR">X</CCUENTA>
<FACTIVACION isOutput="1" type="DATE">X</FACTIVACION>
<ICTA isOutput="1" type="VARCHAR">X</ICTA>
<CCED isOutput="1" type="VARCHAR">X</CCED>
<XCLIENTE isOutput="1" type="VARCHAR">X</XCLIENTE>
<CCPO isOutput="1" type="VARCHAR">X</CCPO>
</v_detalle_vtas_pagadas_ct>
<err_num isOutput="1" type="NUMERIC">X</err_num>
</Generar_Detalle_Vtas_Pagadas>
</VtasPagadasRequest></ns0:MT_VtasPagadas_VYC>
Edited by: ymonasterio on Mar 31, 2010 4:48 PM -
Stored procedure accessing system table
I am using a stored procedure to access tables in other schemas. I pass the schema and table name as parameters to the stored procedure. I use these two variables to create a cursor of column names from all_tab_columns table. When I access all_tab_columns from SQL Plus, the right result is returned. When the procedure executes the same select statement in the same schema and using the same search criteria, the table I am looking for can not be found.
Example:
select count(column_name) from all_tab_columns where owner = 'MYADM' and table_name = 'MYTABLE';
This will return the correct number of columns when executed in SQL Plus.
cursor mycursor is
select count(column_name) from all_tab_columns where owner = p_owner and table_name = p_table;
This cursor, when used in my stored procedure, finds nothing when p_owner is set to MYADM and p_table is set to MYTABLE.
I've tried granting all permissions to the calling schema with no positive results. I am aware that the calling schema is not required to have the necessary privileges when a procedure accesses data in other schemas. So I don't understand what the problem is. I greatly appreciate anyone's help.
CyrusHi,
try this, probaly this'll give you the desired output :
Procedure Column_cnt
( p_owner IN varchar2,
p_table IN varchar2 ) IS
cursor c1 is
select count(column_name) col_cnt from all_tab_columns where owner = upper(p_owner)
and table_name = upper(p_table);
BEGIN
for i in c1 loop
dbms_output.put_line(i.col_cnt);
end loop;
END;
Now from SQLPLUS type :
exec column_cnt('OWNER','TABLE_NAME')
Note: parameters are in Varchar2, so they should be within quotes.
But do you really want a cursor to store a single row, single column value, cursors are for fetching multiple rows/columns that means for a result set.
if you want to get only count(column_name) then you could re-write the procedure like this way :
Procedure Column_cnt
( p_owner IN varchar2,
p_table IN varchar2 ) IS
col_cnt number;
BEGIN
select count(column_name) into col_cnt from all_tab_columns where owner = upper(p_owner)and table_name = upper(p_table);
dbms_output.put_line(i.col_cnt);
END;
Thanks
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by cyrus eslami ([email protected]):
I am compiling and invoking the procedure in a schema that has the correct privileges granted to it.
-Cyrus<HR></BLOCKQUOTE>
null -
Why Dynamic Parameter is not working, when i create report using stored procedure ?
Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kantHi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
My ipod no longer shows any contacts from my address book. iTunes when syncing in the info section - contacts - only shows the all contacts tick box, not categories such as 'family', 'friends' etc. Any thoughts on why this is please? Am suspecting ic
-
How to use session varables and dependent lovsin OAF?
Hi, I have a requirement that if supplier name is selected ,then supplier site and payment number lov must be dispayed according to the selected supplier name. how to achieve this,please suggest.
-
VLookup in LiveCycle Thank you for your posts that have been most helpful in solving some of my issues, but there is one issue I cannot solve. I want to develop an order form for my small business (I had previously created it in Excel with a VLookup
-
Restore from Bropken phone backup to neew phone?
I have a broken Bold. I borrwed a Tourch 9800 until I can get a Blackberry replaced on contract in July. How do I restore my old phone Backup file to the new Tourch, please? I cannot find a Desktop feature to do this.
-
JTextArea - set specific amount of rows, or characters...
I'm working on a Applet which handles text according to given parameters. One of these parameters sets a JTextArea to the horizontal size of, lets say: 5 rows. What i want is that once this TextArea is set to a specific number of rows no text beyond