Problem when activating Query from Business Content

Hi Gurus,
I'm currently encountering problems when activating a query (Financial Statement and P&L: Actual/Actual Comparison) in the business content under these 2 cubes (0FIGL_VC1 and 0FIGL_VC2). Since I was told that these cubes are Virtual Cubes I also have already activated Basis Cubes (0FIGL_C01 and 0FIGL_C02) as a prerequisite of the 2 Virtual Cubes. I have also loaded the data for the 2 cubes and have encountered no problem at all.
But while activating the said Query (Financial Statement and P&L: Actual/Actual Comparison). I have encountered a problem during activation and only this error message appears 1. Error when activating element DO9NE34DKNREWIBWNVAW8BS7M (Technical Name of the Query) and 2. BEx transport request '' is not available or not suitable.
What other possible steps am I missing here?Is there anything else I should do or activate before activating the Query. Thank you again for all the help.
- Kit

Hi Kristian,
Do the following ->
Goto transaction RSA1 -> Transport Connection -> Edit -> Transport -> Switch On Standard.
After this try activating your Query again.
Hope this helps!
Regards,
Saurabh

Similar Messages

Problem while installing a query from Business Content

Hi all of you,
I am trying to install this particular query Inventory Turnover from the cube 0IC_C03 (Material/Stock Movements) from Business Content. Now in the third pane in Business Content under Active version available column across the name of this cube there is a calendar symbol.
a.     So does it mean that the cube 0IC_C03 (Material/Stock Movements) is installed along with all the objects that are dependent on the cube and all those objects on which the cube is dependent. (NOTE: I had selected the grouping option as In data flow afterwars)
b.     When I collapse Query Element I find that some of the queries are not installed. So I expanded Inventory Turnover query, right clicked on it and selected Install All Below.
c.     I am getting this error, Abort system error in program SAPLRRI2 and form LI_SETZEN-01- when I execute the query Inventory Turnover. However in Business Content when I installed the report Inventory Turnover under the cube Material Stock/Movement I didnt get any error anywhere. Everything was activated successfully without any errors.
Please tell me how do I install this Inventory Turnover from business content and how do I execute this report from BEx.
Thank you.
TR.

Hi Arun,
Thank you for that quick reply. I want to activate only the query and not the cube. I did as you advise me but still I am getting the same error when I run the Inventory turnover report from BEx.
I am able to run other reports from the cube IC_C03. But not this report Inventory turnover. I have also checked the cube and there is data in the cube.
Kindly adivse what to do.
Thank you.
TR.

Problem when exporting Query from Web template to Excel Sheet.

Hello,
Im encoutering a problem when im trying to export query output from web template to excel sheet.
A popup windown appears when excel sheet opens which reads.."problem cameup in the following areas during load : Cell Value".The report layout appears to be fine but the totals shows unwanted values starting with * followed by number.
Any valuable inputs, what could be the problem. where can i rectify the same.
Regards
Ellora

Hello A K,
Thanks for ur time and response but the option u mentioned did not serve my purpose.
The problem seems to be only with pirticular cells.As mentioned earlier the layout appears properly..all the values are seen..but the end result..totals are disturbed.
eg: If the report shows in template the total value :20,668,554...when exported the values is shown as **668553.88000000600000.
So what could be the problem ? any template setting ? global setting to look at ?
Regards
Ellora

Problem in Installing/ Activating 0SD_C03 Infocube from Business Content

Hello Friends,
I am installing an InfoCube 0SD_C03 from Business Content in our BW Development environmant. I first installed "Only the Necessary Components". This took 3 hrs. AFterwards I picked "Before Option" and it kept running for 14 hrs, without completeing. In the last I stopped it to minimize the performance impact to anybody.
My question is, do you also face any such problem of installation running for hours and hours? How have you handled its resolution.
Finally, I broken my task into various component and I am installing component by component (e.g. Transfer Rule, Update Riles etc. etc.). But while doing so, human errors are possible and I may miss something. Also we would not like the same activation runs for hours in Production.. So there
Could you share some of your rich experience and possible resolution. Thanks for your help.
Gabeesh Mishra
[email protected]

Friends,
Necessary components took 2-3 hrs. I am running "before option" this weekend and will find out Monday. Running on weekend will not impact anybody.
I am communicating with Basis Team and they are aware of this problem.
In my previous organization, even Before Option will complete in 2 hrs (maximum). I guess there are multiple factors for jobs running so slow. Of course, I am following all rules of the Game!!
Thanks,

Can't find an InfoObject but it is activated from Business Content

Hi
When I review the Business Content component on the left hand side for the objected type InfoObject 0HIER_NODE, it is activated. But when I try to find it from the InfoObject component on the left hand side or RSD1, it is saying that the 0HIER_NODE is not found or entry is not selected.
How can I get to use 0HIER_NODE to map to the InfoSource? I can't seem to find it.
Thanks
Will

Hi Voodi,
Our requirement has to do with using the Z table to fill the table from the R3 side to do both the R3 and BW authorization restrictions. We are tansferring the data from the Z table to BW to the ODS to generate the profiles. I hope it is making sense so far.
The problem is the following:
1. One of our hierarchies is manually created that there is no root but ony the yellow InfoObject symbol (first level) and then the green InfoObject symbols (second level).
2. The other hierarchy is created by using BW07 that has the root node with the vanilla folder symbol (text node) and the second level node with vanilla folder symbols (text node) and then the green InfoObject symbols for the third level.
3. There are differences between these hierarchies, and the ODS InfoSources are mapped:
A. 0TCTNIOBJNM -> Yellow InfoObject symbol (for example, 0COSTCENTER)
B. 0TCTIOBJNM ->Green InfnoObject symbol (for example, ZDEPARTMENT)
According to what I have seen, the hierarchy for item 2 is the way to create hierarchies, similar to what the white paper "How to ... Work with Hierarchy authorizations" illustrates the procedure to set up the authorizations for hierarchies.
I have to make changes to the ODS InfoSource mapping in order to make use of hierarchy item 1 because we are using the Z table to generate the profiles.
What would you do? Certainly there is a difference between using the the Z table and using what SAP suggests per the How To paper. I think my explanation makes sense..
I also wanted to add that the authorizations set up at this time works for item 1 but not for item 2. This is the reason that the text node is mapped as a constant.
Thanks
Message was edited by:
Will Ferrell
Message was edited by:
Will Ferrell

Error while activating 0FIAR_O03 DSO from Business content

Hi,
While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
Thanks,
RAJ

Hi raj,
The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
do the following... try to activate the DSO once again ... you will get the message again
now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
Regards
KP

Queries from business content

Hi,
When we install the out of the box business content queries from business content where are we able to see those queries. ( Like when we install infocube and dataflow before and we will be able to see it all in modeling area, same way where can we see the queries).
Also when we install the queries will the objects like structures,variables, restricted key figures and calculated figures will also get installed.?
Thanks for all the help in advance.

Well the queries will always be attached to an InfoProvider, so you can easily see a list of queries under each InfoProvider. You can see this in the Open Dialog in Bex, or in the BW system you can do this in RSRT. Just F4 on the query text box and lookup up the queries by InfoArea. You can get a whole list of the queries, but then that would mean going to tables and deciphering the query GUIDS.
Another way is to go to the Metadata Repository and looked at queries within the Local Objects (Activated objects).
Hope this helps...

How to install sources for infobject from business content

Hi,
I have 16 infobjects for which we need to move to prod and there are no connections to it but the infobjects are active and some are i modified state, like no datasources, infosources, transfer rules etc., Can you please tell me the approach to install all the necessary for them. I mean how to find and how to install, please help if any documentation is available.
Thanks

Hi daniel,
Inorder to install the business object, you will be require to follow the following steps :
i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
ii)Select your Info Object say 0MATL_GROUP (material Group).Click on Transfer selections.
iii)Now when the info object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc as you want.
v)Now you want to see if there can be some predictive error then go Install --> Simulate Installation.
vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the Material Group install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your A-version Material Group will be overwritten by the D-version Material group provided by SAP.
vii)For ur more understanding lets take the example say you have added two customer specific attribute to Material Group now twist is SAP has also just release the enhance material Group with two additional attribute. Now you are very curious of getting this two attribute in your already active Material Group. For this you will be required to install the material Group from Business content. If you forget to check the Match option then your customer specific attribute will be lost. So to retain them we have to check the MATCH(X)
Hope it will help.
Thanks,
Deepak Machal

Can't create DTP for cube migrated from business content to 2004s

I am in the process of converting 3.5 Business Content InfoProviders to the new model for 2004s.
Master data was not a problem, but Im having a hard time getting InfoCubes to migrate.
I installed 0PUR_C03 from Business Content and replicated the DataSource into the Data Warehouse.
I right-clicked 2LIS_02_S013, selected Additional Functions, then chose Transformation erzeugen (a.k.a. Create Transformation in English).
The transformation is generated with no errors and it was activated. The DataSource is migrated automatically in the process.
Then, I went to add the Data Transfer Process and that is where I got stuck.
I right-clicked the cube and took Create DTP. For source type, I selected datasource. A dialog box then shows the objects associated with the cube, including the converted infosource, but nothing is highlighted for me to choose from, and I cant complete the process of creating the DTP.
Can anyone tell me where I might have gone wrong?

u got it...
Message was edited by:
Raman
Message was edited by:
Raman

Installation of Datasource from Business content

Hi Friends,
While Installing Datasource from Business content in SAP R/3 encounter with following error message. Can some one guide me how to transfer the hierarchy with Business Content. Appreciate your help in resolving this problem.
Application component FI-GL of DataSource 0FI_TX_4 does not exist
Message no. R8418
Diagnosis
You tried to assign a DataSource to the application component FI-GL. This application component is, however, not entered in the RODSAPPL table as an application component.
System Response
The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
Procedure
You do not have the option yet to transfer the application component hierarchy from the Content.
You transfer the hierarchy with Business Content.
Thanks & Best regards
Pravin

Sorry if a year has gone by.
This is because you didn't heve the Application Component Hierarchy installed in BW itself. Use rsa6 to do this, in the BW system (not the other source system. Be careful if you have already somehting there, because it will override the hierarchy with the Business Content hierarchy.
If you need to transport the active hierarchy, and not reinstall all the Business Content Datasources, the object is :
R3TR DSAA APCO_MERGED
So, create a workbench transport, and add the above object.

Update rules not getting installed from business content.

Hello,
One more major issue I am seeing is that my update rules for some cubes (0PUR_C01)are not getting installed at all from business content and the errors i am getting are like datasource 0vendor_text not maintained and then there is long list of such red lights. when actually I can see most of the datasources active in the datasource tab on BW side.
So i dont know how to get these update rules working.
Please advice,
Thanks

Hi Mukund,
please see also the answer that I provided to your thread
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=121274&tstart=0">Strategy toward new and 3.x datasource / infosource</a>
In addtion, you might want to check
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/497e4ec079584ca36b8edba0ea9495/content.htm">help.sap.com DataWarehouse</a>
and the online documentation for more general information about data modeling / acquisition.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Is it possible to delete data selectively from Business content cubes

Dear Experts,
         Requesting you to help me out to know, is it possible to delete data selectively from Business content cubes.
When I'm trying to delete selectively from Business content cubes, the background job gets cancelled with ST22 logs stating
A RAISE statement in the program "SAPLRSDRD" raised the exception condition "X_MESSAGE".
Since the exception was not intercepted by a superior program, processing was terminated.
and i tried with few more Technical content cubes but the same thing happens.
Pls let me know how to selectively delete data from Business content cubes if it's possible?.
Thanks in advance for your favorable assistance.
Regards,
Ramesh-Kumar.

Hi Ramesh,
Follow below steps for selective deletion:
1.     Transaction code: Use the Transaction code DELETE_FACTS.
2.     Generate selective deletion program:
A report program will be generated of the given name, here .
3.     Selection screen:
Take the deletion program u201CZDEL_EPBGu201D to the transaction code SE38 to see/execute the program.
After executing it will take you to a selection screen:
As we need to carry out deletion selective on Calendar week, we need to get the screen field for the field Calendar week. For this, click on the Calendar week field and press F1.
Click on the technical information button (marked in red box above) you will get below screen:
     ABAP program to carry out the Calendar week calculation
Problem scenario: As stated earlier the requirement is to delete the data from the cube based on the calendar week. Thus a code must be developed such that the number of weeks should be taken as input and corresponding calendar week should be determined. This calendar week should be then passed to the deletion program in order to carry out the data deletion from the InfoCube.
     Transaction code: Use T-code SE38 in order to create a program.
Logic: Suppose we need to delete the data older than 100 weeks.
a.     Get the number of weeks and system date in variables and calculate the total number of days :
lv_week = 100.      *number of weeks
lv_dte = sy-datum.     *system date
v_totaldays = lv_week * 7.      *total days
b.     Get the corresponding calendar day from the total days. This is obtained by simply subtracting the total no. of days from the system date.
lv_calday = lv_dte - v_totaldays. *corresponding calday.
c.     Now in order to get the calendar week corresponding to the calculated calendar day we must call a function module 'DATE_TO_PERIOD_CONVERT'. This function module takes input as Calendar day and Fiscal year variant and returns the appropriate fiscal period.
Get the sales week time elements
call function 'DATE_TO_PERIOD_CONVERT'
    exporting
      i_date                      = lv_calday
      i_periv                     = lc_sales
    importing
      e_buper                     = lv_period
      e_gjahr                     = lv_year
    exceptions
      input_false                 = 1
      t009_notfound               = 2
      t009b_notfound              = 3.
if sy-subrc = 0.
    ls_time-calweek(4)      = lv_year.
    ls_time-calweek+4(2)    = lv_period.
endif.
v_week = ls_boots_time-calweek.
Note: We can pass the fiscal year variant which can be obtained from the table T009B.For e.g. here fiscal year variant lc_sales = Z2. LS_TIME will be any table with suitable time units.
d.     Now we have obtained the required calendar week in the v_week variable. This calendar week is the week till which we need to keep the data. And older data than this week will be deleted. This deletion will be done by the deletion program
Submitting the Data deletion program for ZEPBGC01 and key field
SUBMIT ZDEL_EPBG WITH C039 LT v_week.
          Here the calendar week value is submitted to the deletion program ZDEL_EPBG with the screen field of calendar week.
Hope ... this will help you..
Thanks,
Jitendra

How to find the right primary key for DSO from Business Content

According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
Ingrid

Hi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK.

Error in installing process chain from Business Content.

Dear Experts,
I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
<b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
Thanks in advance.
Regards,
NJ

ithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
try this
Aravindan pagadala
satyam

When we go for Business content extraction and when we go for LO/COPA etc.e

Hi Dear Friends
When we go for Business content extraction and when we go for LO/COPA etc.extractions
Thanks
Learner

Hi,
It depends on the KPI you are extracting for,if Business Content Extractor provides you with those then there is no need for generic extractors.
In CO-PA the KPI for profitability differs from client to client.You have Business Content for CO-PA also...
Cheers

Problem when activating Query from Business Content

Similar Messages

Maybe you are looking for