Problem when create standby database

hello,
I have two server(NT4.0,SP6) installed Oracle 8i(8.1.6 Enterprise) at the same directory.I want one as the primary database,another one as the standby database.
The two database have the same SID,use SQL*Plus it can access each other.
My operating steps as below:
1.on primary server:
1)connect internal;
2)shutdown immediate;
3)copy all datafiles(*.DBF) to a backup directory;
4)startup
5)alter database create standby controlfile as 'd:\oracle\ora81\ILLDB\standby.ctl'
6)alter system archive log current
2.on standby server:
1)copy all backuped datafile,standby.ctl,all redo log files from primary server to standby server,overwrite all same name files;
2)modify the init.ora,add this parameter:
"standby_archive_dest = "location=D:\Oracle\oradata\ILLDB\archive" ";
3)statup oracle service in Service control manel;
4)run svrmgrl.exe;
5)startup nomount;
6)alter database mount standby database;
then a error message appear:
"ORA-01665 controlfile is not a standby controlfile".
I don't know which step is mistake.Please tell me correct steps.
Thanks

I did face the similar problem while trying to create and startup a clone database for Point in Time Recovery (PITR). The error message is
ORA-01696 controlfile is not a clone controlfile
Are you folks have any idea how do I resolve this problem?? Is there any way to create clone control file??

Similar Messages

The Critical Problems for Creating Standby Database

The Critical Problems for Creating Standby Database:(I want to create a physical standby database on the same system of the primary database)
1. Should I copy all the backup datafiles, standby controlfile and password file to a same directory before the first time to mount the standby database?
2. Before mounting the standby database, Should I change the datafile's name to a new one in the standby controlfile? How to change them?
3. When issuing the command to mount the standby database, should I specify the controlfile's name.(using which controlfile to mount)
These problems are not clearly secified in Oracle documentations.

Can you point us to the Windows specific documentation you refer to?
The parameter DB_FILE_NAME_CONVERT should take care of the new mapping for your datafiles (and LOG_FILE_NAME_CONVERT for logs), so you should be able to put them where you want and use the parameter to point Oracle to the correct location. You should not need to change the name in the controlfile.
Place your standby controlfiles where you have the control files defined in your parameter file and Oracle should recofgnise that it is a standby db. You should not need to specify which controlfiles to use (if this is even possible), your CONTROL_FILES init parameter points to them.
Not sure about the password file....my instances are on separate boxes and the password file has the same name on both primary and standby.

Installation problem when creating first database

Hy , I have a dell power edge with Windows 2003 R2 32bit. 4Gb RAm. I am installing oracle standard edition 11g. the installation completed successfully, when creating the default database i got an error. It refered me to the log below
Location of the file is : D:\Oracle\app\Administrator\cfgtoollogs\dbca\ORCL\emConfig.log
SEVERE: Error starting Database Control
Refer to the log file at D:\Oracle\app\Administrator\cfgtoollogs\dbca\ORCL\emConfig.log for more details.
Nov 10, 2008 5:07:32 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:869)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:250)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:213)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:235)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
I have tried deleting the database and recreating it. Still the same.
I have put the ip and host name of the server in the host file . does not work.
Can you help me please

D:\Oracle\app\Administrator\cfgtoollogs\dbca\ORCL\emConfig.log contains the following information
CONFIG: Waiting for service 'OracleDBConsoleORCL' to fully start
Nov 10, 2008 5:07:32 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\Oracle\app\Administrator\cfgtoollogs\dbca\ORCL\emConfig.log for more details.
Nov 10, 2008 5:07:32 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:869)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:250)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:213)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:235)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
Nov 10, 2008 5:07:32 AM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to D:\Oracle\app\Administrator\product\11.1.0\db_1\oui

Problem when configuring standby database

Hi,
i am getting the following error when i am configuring the standby database,i have set every thing right
ORA-28547: connection to server failed, probable Net8 admin error
PING[ARC0]: Heartbeat failed to connect to standby 'orcl5'. Error is 28547.
Error 28547 received logging on to the standby
Tue May 29 22:13:21 2007
Errors in file /u01/u06/bdump/orcl4_arc0_32147.trc:
ORA-28547: connection to server failed, probable Net8 admin error
PING[ARC0]: Heartbeat failed to connect to standby 'orcl5'. Error is 28547
please suggest me how to go about this

This is my primary
*.background_dump_dest='/u01/u06/bdump'
*.compatible='10.1.0.2.0'
*.control_files='/u01/u06/ctrl01.ctl'
*.core_dump_dest='/u01/u06/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl4'
*.instance_name='orcl4'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orcl2XDB)'
*.job_queue_processes=10
*.log_archive_dest_1='LOCATION=/u01/u06/arch'
*.log_archive_dest_2='SERVICE=orcl5 reopen=60'
*.log_archive_format='%t_%s_%r.dbf'
*.open_cursors=300
*.pga_aggregate_target=200278016
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=601882624
.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/u01/u06/udump'
#*.standby_archive_dest=/u01/u05/arch
#*.standby_file_management=manual
*.lock_name_space=orcl4
standby
#########3
*.background_dump_dest='/u01/u03/bdump'
*.compatible='10.1.0.2.0'
*.control_files='/u01/u03/stdbyctrl.ctl'
*.core_dump_dest='/u01/u03/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl4'
*.instance_name='orcl5'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orcl2XDB)'
*.job_queue_processes=10
*.log_archive_dest=/u01/u03/arch
*.log_archive_format='%t_%s_%r.dbf'
*.open_cursors=300
*.pga_aggregate_target=200278016
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=601882624
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/u01/u03/udump'
*.standby_archive_dest=/u01/u03/arch
*.standby_file_management=manual
*.lock_name_space=orcl5

Problem when creating 8i database on RH6.0

my machine is oracle 8i on REdhat 6.0
and when I use script to create database
it is said some views ,some tables and synonym do not exist
then drop them
Will the database work well in future?

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Creating standby database using RMAN

When I'm creating standby database with RMAN command
'duplicate for standby' backups for creating standby database
have to be accessible from host where standby database
is created. I can copy the backups to standby host, or use
NFS to share the disk with backups to standby host.
But when I have backups in ASM diskgroup how can
I achieve it would be accessible from standby host?
Thanks a lot for advice,
M.

OK, thanks,
I will create standby using Grid, but I have the following problem:
database instance is running on the host where I want
to create standby database. The running instance is for
testing purposes and has the same db_name, db_unique_name, db_domain
parameters as in primary database.
I will change db_unique_name to be distinct from primary database one,
should I also change instance SID not to be the same in
testing database and standby on the same host, or when creating standby
database I can specify distinct one for standby database?

Problem with create standby by rman oracle9.2

I have a problem: until create standby database by rman i have error:
RMAN-03015: error occurred in stored script opomc_clone
RMAN-03002: failure of Duplicate Db command at 02/18/2010 12:26:34
RMAN-03015: error occurred in stored script Memory Script
ORA-19587:
ORA-27091: skgfqio:
ORA-27072: skgfdisp:
SVR4 Error: 5: I/O error
Additional information: 349248
The scripts are ok becouse they work earlier.
The main database was a standby but now is primary.
I create new standby base on remote server
I have in bdump strange error for me until create rman copy for standby:
Clearing standby activation ID 1004670785 (0x3be20f41)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 409600000;
Any suggestions?
Sorry for my english :)
Edited by: user12044451 on 2010-02-18 03:56

can you use like this
BACKUP DATABASE INCLUDE CURRENT CONTROLFILE FOR STANDBY PLUS ARCHIVELOG;startup nomount;
duplicate target database for standby nofilenamecheck;
in detail check
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1000921

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Problem when creating Database:

There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when creating Database with Database, OS and hardware Configuraiton

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when creating Database (Database, OS and hardware Configuraiton)

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Add temporary datafiles after creating standby database

I used data guard manager to create standby database and it went fine. Before finish, system pop up a window and says,
"The data guard configuration has been created in a disabled state. It must be enabled using the Enable option in the configuration menu. Pior to ebaling the configuration, please verify the following:
The Primary database contains temporary datafiles. The files will not be duplicated in the new standby database. You must manually recreate the temporary files on the standby node by adding them to their respective tablespaces in the standby database after creation process in complete."
The problem is, in the standby database, how do I add tempfile without open the standby database? the documentation is very unclear...

Thanks for the reply and the useful link. I had followed the instructions when creating the standby database, although under database options there is a difference between the OEM version we are using and the version shown, whereby the 'RMAN backup location' option has been replaced with 'working directory location'.
Just found the following and am guessing this is the issue.
NFS mounts established within a zone are local to that zone. The mounts cannot be accessed from other zones, including the global zone.
I suspect I will need to copy the backup pieces onto the local server in order to create the standby database using OEM. Not something I was expecting to have to do as copying will take a long time due to the size of the backup, but unless anyone else can shed any light on the reason for the initial error
RMAN Backup Location - The specified RMAN backup is invalid. Could not identify controlfile from the backup
then I guess this is the only way forward.
Regards,
JP

SSMS crash when creating new database diagram

For several years I have been unable to create database diagrams from within SSMS. I have tried every combination of VS2005, VS2008, VS2012 and VS2013 with every combination of SQL2005, SQL2008, SQL2012 and SQL2014.
I have installed, uninstalled, and repaired many dozens of times. I am currently using VS2013 ultimate with SQL2014 express.
I have tried every related 'workaround' that I can find on the internet. Still the problem persists.
Any help would be deeply appreciated.
Here are the relevant details with file versions:
In SSMS, I right-click on a database and choose New Database Diagram. A Blank diagram window appears with the SSMS error dialog:
===================================
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
Program Location:
   at Microsoft.VisualStudio.OLE.Interop.IOleCommandTarget.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.DocumentObjectSite.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.Internal.VisualStudio.Shell.Interop.IVsTrackSelectionExPrivate.Register()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConnectSelectionContext()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Activate()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowManagerService.viewManager_ActiveViewChanged(Object sender, ActiveViewChangedEventArgs e)
   at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
   at Microsoft.VisualStudio.PlatformUI.ExtensionMethods.RaiseEvent[TEventArgs](EventHandler`1 eventHandler, Object source, TEventArgs args)
   at Microsoft.VisualStudio.PlatformUI.Shell.ViewManager.SetActiveView(View view, ActivationType type)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ShowInternal(ShowFlags showFlags)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.<Show>b__26()
   at Microsoft.VisualStudio.ErrorHandler.CallWithCOMConvention(Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Show()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.<Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show>b__7a()
   at Microsoft.VisualStudio.Shell.ThreadHelper.Invoke[TResult](Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show()
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection
con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.CreateDesignerWindow(IManagedConnection mc, DocumentOptions options)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.InvokeDesigner(IManagedConnection connection)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.Invoke()
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ToolsMenuItemBase.MenuInvokedHandler(Object sender, EventArgs args)
Version info taken from Sql Server Management Studio/Help/About dialog:
Microsoft SQL Server Management Studio      12.0.2000.8
Microsoft Analysis Services Client Tools    12.0.2000.8
Microsoft Data Access Components (MDAC)     6.1.7601.17514
Microsoft MSXML                             3.0 4.0 5.0 6.0
Microsoft Internet Explorer                 9.11.9600.17358
Microsoft .NET Framework                    4.0.30319.18444
Operating System                            6.1.7601
DLL versions
c:\Program Files(x86)\Common Files\microsoft shared\Visual Database Tools
dsref80.dll version 12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8
msdds.dll    12.0.21005.1
msddsf.dll   12.0.21005.1
msddslm.dll 12.0.21005.1
msdds.mp.dll 12.0.21005.1
msddsp.dll   12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8\Resources\1033
msddsui.dll 12.0.21005.1

Hello,
There is a Connect item related to this issue. This is the link of that Connect item:
https://connect.microsoft.com/SQLServer/feedback/details/730985/smss-crashes-when-creating-new-database-diagram
Try the workarounds posted there (Workarounds section).
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Creating standby database

Hi
I want create standby database in Oracle 10g.
I can create standart database by using database configuration assistant.
How can I create standby database in Oracle 10g?

Hi,
Standby databases, in a nutshell, acts as a failover for our mission critical production databases. When production database crashes, applications can quickly switchover to the stand by databases.
What type of Standy you are willing to go for ??
Physical Standby Database
Standby database is called “physical” if the physical structure of stand by exactly matches with stand by structure. Archived redo log transferred from primary database will be directly applied to the stand by database.
Logical Standby Database
Stand by database is called “logical”, the physical structure of both
databases do not match and from the archived redo log we create SQL statements then these statements will be applied to stand by database.
Follow this link for creating standby database
http://www.oracle-base.com/articles/8i/StandbyDatabase.php
http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ps.htm
Thanks
Pavan Kumar N

How to apply Oracle patch when physical standby database in place

Dear All,
I want to apply Oracle patchset 8 on 10.2.0.5 when physical standby database in place. What are the steps for Primary site and for standby site.
Thanks in advance
Kamran Laeeq

Hi Kamran,
You will not upgrade or patch the standby database by importing offline redologs. On the contrary, there is a procedure to do this. Please note that you will not transitiate the role from standby to primary or startup the database. You will just startup the database by executing "startup mount" and "startup upgrade", during the upgrade. It means that you will not change database role standby to primary and you will be able to continue to the log shipment after the respective upgrade.
But, it is very important that you should stop the log shipment and apply all the offline redologs, before the upgrade. Technically, you can import offline redologs after the upgrade, by changing "compatibility" parameter in oracle, but regarding to my experiences it may cause some problems after you transitiate the role from standby to primary.
In short;
In order to stop log shipment, at the primary site;
alter system set log_archive_dest_state_2=defer;
In order to import all the offline redologs without a delay, at the standby site;
alter database recover managed standby database cancel;
alter database recover managed standby database nodelay disconnect from session;
I hope that I clarified the issue,
Best regards,
Orkun Gedik

Problem when create standby database

Similar Messages

Maybe you are looking for