Problem when load more swf files work with xml files into my movie

hi ;
I have one flash file & more of swf files which work with xml files .
when I load one swf file into my flash file  and remove it and load anther one on the same movieclip in my flash file it load the old swf file.
when i load one on movieclip and remove it and load anther swf  on anther movieclip the file doesn`t work  and stoped.
when test my flash file to load and remove swf files without xml file it work fine but when repleaced the swf files with other work with xml files the problem hapend.
thanks;

YOu should trace the names of the files that are being targeted for loading to see if they agree with what you expect.  If you want help with the coding you will need to show the code that is relevant to your problem (not all of it)

Similar Messages

  • Problem when trying to send a mail with pdf file attached

    When I use this features from Adobe reader, a new mail is opened with pdf file but my Outlook signature is not set automatically. Note that all is right configure in Outlook 2007 for the signature option...
    Do you have a solution for this problem ?

    someone else reported this (unless it was you) You'll have to insert your sig manually.

  • InsertHTML won't work with XML files

    I am trying to create a command that writes text to an open
    XML file. The command I've created works fine under some
    circumstances but not others.
    It works if I open an XML file and apply the command without
    editing the file. If I make any edits to the file manually and then
    apply the command, it doesn't insert anything.
    It works fine with HTML files in design view, but in code
    view, if I make any edits and then run the command, nothing
    happens. If I switch to design view and back again, the command
    then works fine.
    I tested the built-in Dreamweaver command "Flash Text" on an
    XML file (after editing it so it could be used with an XML file),
    and the same problem occurs with this command when using it on an
    XML file. The problem didn't occur with HTML in code view, though.
    Below is the .JS file for my command. The corresponding HTML
    file contains only an empty form.
    function canAcceptCommand() {
    return(true);
    function isDOMRequired() {
    return false;
    function commandButtons()
    return new Array( MM.BTN_OK, "cmdOK(); "
    , MM.BTN_Cancel, "cmdCancel();");
    function cmdOK()
    var theDOM = dw.getDocumentDOM('document');
    theDOM.insertHTML("test", true);
    window.close();
    function cmdCancel()
    window.close();

    I need a function, though, that will insert text at the
    cursor location in an open file.
    I'm also discovering that the command I created above
    functions erratically even when it does deign to insert the text in
    an XML file. The text is usually inserted somewher other than where
    the cursor is located.

  • Skin Setting not working with XML file

    I am trying to use the Adobe Flash Playback with a flashvars skin setting.  I am pointing this setting to an xml file where I am trying to overide the playButtonOverlay image.  Below is my code.  I am using MVC, so you will see a couple Html Helpers.  The helpers are working just fine.  It is only the skin setting I can't seem to get to work.  Any help would be appreciated.  Thanks, Michael.
    Html File
    <object width="384" height="288" >
         <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" />
         <param name="flashvars" value="src=<%: Model.VideoFilePath %>&poster=<%: Model.PosterFilePath %>&skin=/Skin/FlashPlayerSkin.xml" />
         <param name="allowFullScreen" value="false" />
         <param name="allowscriptaccess" value="always" />
         <param name="quality" value="high" />
         <param name="wmode" value="transparent" />
         <embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash"
              allowscriptaccess="always" allowfullscreen="false" width="384" height="288"
              flashvars="src=<%: Model.VideoFilePath %>&poster=<%: Model.PosterFilePath %>&skin=/Skin/FlashPlayerSkin.xml"
              quality="high" wmode="transparent" />
    </object>
    XML File
    <?xml version="1.0" encoding="utf-8" ?>
    <skin>
      <elements basePath="/Content/MFBImages/FlashPlayer/">
        <element id="playButtonOverlayNormal" src="playButtonOverlay.png"/>
        <element id="playButtonOverlayDown" src="playButtonOverlay_down.png"/>
        <element id="playButtonOverlayOver" src="playButtonOverlay_over.png"/>
      </elements>
    </skin>

    Thank you both for replying so quickly.  I still don't seem be having too much luck.  The first thing I did was watched fiddler, and it did show an error with crossdomain.xml.  So I added the below elements to a crossdomain.xml file in my root folder.  I also changed all my paths to be absolute for both the skin flashvar and xml, but still no luck.
    crossdomain.xml
    <?xml version="1.0" encoding="utf-8" ?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
      <allow-http-request-headers-from domain="*" headers="SOAPAction,Content-Type"/>
    </cross-domain-policy>
    Since I am having trouble with the xml, I decided to try and just put the skin element into the html page where the flash player is located.  I then removed the flashvar skin element out of the player.  Below is my code for the skin element and flashplayer with absolute paths.  The player still seems to use the default overlay play button.  Any other suggestions would help out greatly.
    <skin>
    <elements basePath="http://localhost:1852/Content/MFBImages/FlashPlayer/">
      <element id="playButtonOverlayNormal" src="playButtonOverlay.png"/>
      <element id="playButtonOverlayDown" src="playButtonOverlay_down.png"/>
      <element id="playButtonOverlayOver" src="playButtonOverlay_over.png"/>
    </elements>
    </skin>
    <object width="384" height="288" >
    <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" />
    <param name="flashvars" value="src=http://localhost:1852/VideoLibrary/Agents/test video.flv&poster=http://localhost:1852/Content/MFBImages/AgentImage/Poster.jpg" />
    <param name="allowFullScreen" value="false" />
    <param name="allowscriptaccess" value="always" />
    <param name="quality" value="high" />
    <param name="wmode" value="transparent" />
    <embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash"
        allowscriptaccess="always" allowfullscreen="false" width="384" height="288"
        flashvars="src=http://localhost:1852/VideoLibrary/Agents/test video.flv&poster=http://localhost:1852/Content/MFBImages/AgentImage/Poster.jpg"
        quality="high" wmode="transparent" />
    </object>

  • How to work with .XML files with FINAL CUT PRO HD

    Ok so I am a newby, kind of. We filmed a feature using the SONY XDCAM 350. uses the optical 23.3GB disc. I used the camera to copy all the HD files ( .XML ) to an 1TB external drive. Now the drive is readable, everything looks fine, when I select a .XML file. Final Cut Pro HD opens, but then asks to choose a TRANSLATION file. Where do I go from here. I do not understand that command of action it is asking. Newby here, so pity me for awhile.
    Thanks

    my instinct is "No" but thats no (because the app is expecting th efiles to be located on an mounted XDCAM disc that is formated as such) ... but in your situation I'd be inclined to download the XDCAM Transfer app and try for myself
    what you may need to do though is get hold of the discs and a deck and import using the method above
    failing that you have the option of using Flip4Mac's MXF quicktime components ... not cheap.
    this will allow you to select the local XDCAM source media that you've alreday transfered in the native MXF format, and rewrap as Quicktime for editing in FCP
    (a trial version is available for download)
    ... and if thats out of budget, or for whatever reason not an option, you can sit it out and see if the next FCP revision helps you out any with its direct Log and Transfer support for XDCAM. may have the same restrictions though (ie need a properly attached formatted device)
    ... and other than that, you're looking at switching to an NLE with native MXF support (Avid, Edius, Vegas etc)

  • Problem when using templates in report 6i with xml defination

    Iam trying to generate a report through xml defination , and iam including the template
    in the xml . but when i include a user parameter in the template and try to map that UI parameter as f_1 in margin (you can look in object navigator) and run the report through xml then report is hanging, But it works fine when i add the template to the rdf . I doesn't when i include that tdf in the xml and run it. can any one solve this problem.
    manks
    null

    In the template you should change both the font for headings and for data.
    Those are 2 different section in the template.

  • Page layout problem when using more than 3 iviews(with Tab Strip controls)

    Hello Experts,
    I am using MS Visual Studio 2005 and PDK 2.5 for .net.
    I have created four iViews where two iViews are having TabStrip control which are dynamically added to iView.
    When I add iViews to the page and view page  ,I am not able to see the content of iViews having TabsStrip controls.
    But I can see contents with individual iView.I am using 3 columns layout for this scenario.
    I have tried all possible layouts available in EP.
    How should I placed iViews in page so that contents of iviews having Tabsrtip control will be displayed.
    Any help appreciated
    Regards
    Sunil Pawar

    Hi Sunil,
              Try changing the isolation property of iView to URL(Isolated) from Embedded-->Save .Now assign these iViews to the page.
    For more info,
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/97/0be13dc2fd605ae10000000a11405a/content.htm">Isolation Property</a>
    Regards,
    Vinoth.M

  • How to work with xml in java ?

    Hello everybody. I am trying to read, write and modify xml file in java. But i don't know what is the best method for work with xml file ? Please give me some examples for read, write and modify it.
    Thanks in advance.

    >
    Hello everybody. I am trying to read, write and modify xml file in java. But i don't know what is the best method for work with xml file ?>'It depends'. I saw some discussions of XML parsing using different J2SE core XML APIs (the J2SE has a selection of ways to deal with XML) where one API was 20 times faster than the other.
    >
    ... Please give me some examples for read, write and modify it. >Please give me a ponie. ;-)
    You will probably need to do a lot of reading, as well as some experimentation, before you decide which XML API is best suited to the particular task you are facing.
    >
    Thanks in advance.>No worries.

  • Unexpected problem: uncaught exception when working with audio files in Soundtrack Pro

    Hey,
    Whenever I double click an audio file in the timeline to work on it, I end up getting the Error message: "Unexpected problem: uncaught exception" and Soundtrack Pro eventually crashes.  Also, this happens when I try to work with audio files in the file editor.  I have Leopard and am using Logic Studio 8.  Any insight would be much appreciated. Thanks
    Matt

    Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro.  So I could go no further in my perverse science experiment. 
    It also appeared that I could only import an aif but not a wav? 
    I gave up on STPro and did what I needed to do in Logic, which I use regularly.    
    Thank you for folowing up on this. 
    PS.  I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect.  It appears that the new version (3.0.1) does not allow you to do this anymore?  You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?  
    Im such a newbie at STPro that I am probably not using it right? 

  • Very slow responce when working with Office file on DFS-Share

    Very slow responce when working with Office file on DFS-Share
    We have implemented the following configuration
    Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
    Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
    Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
    \\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
     What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
    reboot.
    Considerations until now:
    1. This has nothing to do with the file size. Even tiny files are affected.
    2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
    3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
    \\ServerName\Root\Home\UserName , everything functions as expected
    What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
    located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
    Just forget to say. All clients are Windows 7
    Thanks to all who respond.

    Dear all,
    sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
    What was done:
    Deleted replication targets excepting the initial ones
    Carefully recreated folder targets
    Deleted and recreated  replication groups
    Disabled SNP features on both namespace servers
    Created EnableTCPA registry entry
    Checked that the following Updates are installed
    http://support.microsoft.com/kb/2688074
    http://support.microsoft.com/kb/2647452
    Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
    Kind Regards
    Eduard

  • Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

  • TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

    i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site  to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
    I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
    I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
    i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
    i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
    saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
    i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
    does anyone have a sollution?

    Type '''about:support''' in the URL bar and hit Enter.
    Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
    If you do have that, click on '''user.js file''' in this sentence. <br />
    ''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
    Does that "different homepage" appear in that user.js file?

  • Photoshop CS6 keeps freezing when I work with large files

    I've had problems with Photoshop CS6 freezing on me and giving me RAM and Scratch Disk alerts/warnings ever since I upgraded to Windows 8.  This usually only happens when I work with large files, however once I work with a large file, I can't seem to work with any file at all that day.  Today however I have received my first error in which Photoshop says that it has stopped working.  I thought that if I post this event info about the error, it might be of some help to someone to try to help me.  The log info is as follows:
    General info
    Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86403
    Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988950
    Exception code: 0xe06d7363
    Fault offset: 0x00014b32
    Faulting process id: 0x1834
    Faulting application start time: 0x01ce6664ee6acc59
    Faulting application path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Photoshop.exe
    Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
    Report Id: 2e5de768-d259-11e2-be86-742f68828cd0
    Faulting package full name:
    Faulting package-relative application ID:
    I really hope to hear from someone soon, my job requires me to work with Photoshop every day and I run into errors and bugs almost constantly and all of the help I've received so far from people in my office doesn't seem to make much difference at all.  I'll be checking in regularly, so if you need any further details or need me to elaborate on anything, I should be able to get back to you fairly quickly.
    Thank you.

    Here you go Conroy.  These are probably a mess after various attempts at getting help.

  • Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows

    Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows. Any fixes?

    Same problem here...

  • Has anyone not working with .dv files had synchronization problems?

    Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
    The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
    Message was edited by: Paul Bullen

    Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

Maybe you are looking for