Problem when login to Visual Administrator

Hi all,
Here is a problem while login into visual administrator.when i run go.bat file it is throwing a syntax error.
So,can anyone suggest me how to resolve.
As i need to active the services to run AE for Netweaver PI.
Thanks,
Kalyan.

Hi,
Try logging on the ABAP stack withthe J2EE_ADMIN and changing the password there.
Or you can update the password in the secure store area (admin/password<SID>)of the configtool.bat.
Try this very simple procedure and also try to check the below things also but try the first option.
Please follow steps one by one. it should resolve your issue.
Reasons for this issue; plz check it one by one.
1. Did you configure with ABAP? if yes, plz do below steps:
Plz assign SAP_J2EE_ADMIN role to J2EE_ADMIN user.
2. VA login dialog; Please check Port(5xx04) is right?
3. Admin password is wrong or lockecd.
If yes, Activate SAP* then reset or unlock it. For this jus follow below steps:
If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please reward points if it helps
Thanks
Vikranth

Similar Messages

Error when connecting to Visual Administrator

Hi Experts,
Im getting this error when trying to connect to visual administrator...
Im basis, and already ask to the IT team to open the port 50004 so the Visual administrator can connect. Their answer was that the port is open waiting for a tool to ask to connect to it. I´ve been looking for info in regards this issue unsuccessfully, can't find anything. Any ideas????
Thanks in advance...

Hi,
Administrator user may be locked you can unlock and then try to connect Visual Administrator and please read below link
Visual Administrator: Logon Failure (SAP Library - SAP NetWeaver? Problem Analysis Guide (PAG))
Thanks
Brahma.

"User authentication failed" when connecting with Visual Administrator

Hello,
I am having trouble making a connection to my local J2EE Engine using the Visual Administrator (VA).
I open the VA interface and create a new connection. The default User Name is "Administrator". I put in "localhost" for host, "50004" for port and leave the Transport Layer selection to "Default".
When I try to connect this way I get the following message:
User authentication failed
Next I went into Start|Settings|Control Panel|Users and Passwords and saw that there were several ids created by the Developer Workplace (DW) installation. The ids that I see are: j2eadm,sapadmin,sapinstall and SAPServiceJ2E
I checked all of them to see what groups they're members of and they're all at least members of "Administrators" group.
There are also 3 new groups that must have been created by the DW installation: SAP_J2E_GlobalAdmin, SAP_J2E_LocalAdmin and SAP_LocalAdmin.
The j2eadm id belonged to all 3 new sap groups so I changed its password to something I'd remember and then changed the connection to use that login.
When I tried to connect thru VA using this id and the new password I still get the "User authentication failed" error message.
Can anyone please tell me what I'm doing wrong?
Thanks in advance for any help.
David.

Hi,
During the installation the SAPINST asks for a Administrator Password.. This password is very important.
We had kept same passwords for all userids to start with.
This helped reduce lot of confusion.
Warning: if you enter the wrong password 5 times, the userid 'Administrator' gets locked.
However there is an Emergency password recovery procedures.
Try this link
http://help.sap.com/saphelp_erp2004/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm
Hope that helps
Regards,
Siddhesh

Maximum no of administrator users that can login into Visual Administrator

Hi All,
I am using WAS 640 ( ABAP + JAVA Addin) .. I wanted to know is there any parameter that i can set to limit the number of users (all with administrator rights) who can login into the Visual Administrator tool simultaneously...
Thanx...

Try this
To increase the maximum number of opened connections and/or the time to wait for a new connection you should change the DataSource properties in the Visual Administrator or manually modify of the data-sources.xml file.
The necessary steps in the Visual Administrators are as follows:
a. Open the Visual Administrator and select Server Services JDBC Connector.
b. Select the appropriate DataSource within the Runtimetab on the right.
c. Select the tab named Additional.
d. Set the desired values for the fields Maximum Connectionsand/or Maximum Time to Wait for Connection.
e. After your modification select Save. The Visual Administrator will prompt you for application redeployment. After confirming that, you should be able to get the connection from the database.
thanks
saurabh

Problem when login using EAP

i'am using ACS and cisco 3600 to perform wireless mobility using GPRS.
now i'm having a problem when one of my GPRS scanner (Fujitsu) can't access to ACS using EAP.
that GPRS scanner must used PAP to access to ACS.
But, my other GPRS Scanner (Symbol) can access.
please advice

i'am using ACS and cisco 3600 to perform wireless mobility using GPRS.
now i'm having a problem when one of my GPRS scanner (Fujitsu) can't access to ACS using EAP.
that GPRS scanner must used PAP to access to ACS.
But, my other GPRS Scanner (Symbol) can access.
please advice

Display resolution problem when login

My screen dislay suddenly has resloution issue. l checked System Preference -> Display
and the resolution is set at 1280x800, which should be the correct settings. But the display still shows on lower resolution.
I reboot/shutdown, still the display is not display as 1280X800.
Then I logon with a different username, it works as normal.
Only time the display has issue is when I am using my username.
It is a MacBook Pro running OS X 10.7
Anyone running into similar problem? Please help.

Reset PRAM. http://support.apple.com/kb/PH4405
Best.

Wireless keyboard problem when login to Magister (Silverligt based)

My wireless keyboard works just fine except when I want to login into Magister (a Dutch schools system based upon Silverlight).
I hit the keys to put in my login codes, but the keys do not show up in the login screen.
Is there anything wrong in my keyboard settings?

Hello Jimbow46,
It sounds like your keyboard is acting strangely when the computer boots or wakes until you power cycle the keyboard. I think you should next try resetting the SMC and the PRAM in that order. These articles will help you do that:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
And:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Supplementation language complete, but there's problem when login

Hi friends,
I done following step (my system is ECC 6.0):
- In client 000:
+ Run Tcode : I18N and add new language key(VI - Vietnamese)
+ Run Tcode: SMLT and supplement (menu Language->Special action->Supplementation language(expert)
- In client XYZ:
+ Run Tcode: SMLT and run client mainternance (menu language -> Special actions->client mainternance)
Change zcsa/installed_languages profile parameter to E쁩 and restart application server.
After that, i login client XYZ with language vi, the message appear : no vendor specified... and the session terminate.
Please let me know, any steps miss?
Points will be rewarded if reply useful...
Thank

We're also trying install Vietnamese into an ECC 6.0 Enhancement Pack 4 system. Our issue is with the value we need to add to the parameter zcsa/installed_languages. We're concerned whether or not we can cut/paste that non-Latin 1 character into either RZ10, or the profile in UNIX. To date, we've only added English (latin-1) characters to our profiles.
Any assistance will be appreciated.
John

Error in logging using "Default" account to access visual administrator

Dear experts,
i had encountered the following error message when i tried to login to Visual Administrator using go.bat using default.
Unable to look up connection Default
http://L31021:8108/msgserver/text/logon returned empty list of connection parameters
and when i tried using another account and direct connect to a dispatcher node, they say error while connecting.
please give me advice on how to solve the problem.
thank you for the attention given and time.
with thanks,
kejun

Hello Tan,
The error from the first type of connection indicates that the message server list of registered nodes was empty. The list is empty when the server and the dispatcher nodes are not running or using different message server.
First check in the dev_server0 and dev_dispatcher files in the work directory that they are connection to the same message server. Then in std_server0.out and std_dispatcher.out try to find why the server and the dispatcher nodes didnu2019t register in the message server. Also check the default trace files of both nodes.
Regards,
Ventsi Tsachev
Technology Development Support (J2EE Engine)
SAP Labs, Palo Alto, Ca (USA)

Visual administrator getting hanged

HI all,
I have given the login credentials for visual administrator but it hangs at 99%.I tried to follow the note 957355 but still the problem persists.Can anybody help me plz.

Hi,
I am requesting you to check the work arounds first in SDN, before posting the error messages.
please have a look on the below links.
Re: Login to Visual Administrator J2EE 6.30 SP 02 hangs on 99 %
Re: Login to Visual Administrator J2EE 6.30 SP 02 hangs on 99 %
-Srini

Lost policy configurations in Security proivder in Visual Administrator

Hi Portal Gurus,
I lost Polcy Configurations in Security Provider service in Visual Administrator.Now Iam not able to login to Visual Administrator its giving an error.But portal is up and running .when I check in visualadminconsole log saying "logon module not suceeded"
Is there anyway to recover Policy configuration ?
Regards
Tami

Pl follow the steps given in the below link.
Thanks,
Vuthpala
[[http://help.sap.com/saphelp_nw70/helpdata/en/7f/c52442ad9f5133e10000000a155106/frameset.htm]]

"Cannot connect to host:" - Visual Administrator Error

Dear Experts,
I am unable to login using Visual administrator and the portal is also down. When i try to login using VA it gives the error
Cannot connect to Host:XXX and Port:XXXX
and when i try to call the portal url i get a page cannot be displayed error is displayed.
I have tried the following solution with out any luck.
Cannot startup visual administrator due to UME logon client details changed
/thread/731863 [original link is broken]
Cannot startup visual administrator due to UME logon client details changed
Very urgent. Please help ASAP
Thank you
Thanu

Hi Tomas Gustafsson,
Thank for the reply,
dev_jcontrol
dev_server0
dev_dispatcher
-> Displays the line as programming code
Hallo

[SAP NetWeaver 2004] Can't logon in Visual Administrator

Hi community,
I can't login in Visual Administrator with SAP NetWeaver 2004 - Trial Version on Linux (NW4)
I try to logon using J2EE_ADMIN/ADMIN as login/password but when I try to connect it remains in connecting state.
In the logs I can see the following error:
Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX
User J2EE_ADMIN on SU01 transaction seems correctly configured, and has the role SAP_J2EE_ADMIN
Where do I go wrong?
Thanks, Valerio
PS I know this release is old and not supported but it's not so resource-demanding as the 2004s version

Hi Valerio,
I think you dont have correct password maintained in the secure store. please try this.
1. check if j2ee_admin is locked or not in SU01.
2. if you know j2ee_admin's correct password
- go to configtool, by running /usr/sap/<SID>/DVEBMGS00/j2ee/configtool/configtool.sh
- in the secure store maintain the password of j2ee_admin in the field "admin/password/<SID>"
- set and this will ask you to restart java cluster.
- restart the java cluster by going through SMICM tcode in ABAP side. SMICM > Adminstration > J2ee cluster global > send hard shutdown > with restart.
Hope this helps.
Debasis.

Error in Visual Administrator Logon

Hi everyone,
I have installed PI with cluster, when i try open Integration Repository, appears the one message with error "...5000/P4".
Then, I have change "P4 Provider" in Visual Administrator to resolve the error above.
In bindHost i have changed the bindHost value for (myhost1:mythost2), list of hosts separed with ":".
After change value above, i restarted the NW Instance.
But now, when i try to do login in Visual Administrator, occurs the following error:
Connot open connection on host "myhost" and port "50104"
I already connect with ports 50000 until 50004 but always occurs the same error listed above.
Can anyone help me

Did you put the host name or the IP address (4 octets) <IP address>:<IP address>
We run VCS cluster and we used this scenario it worked for us in the past XI 3.0 SP13. We are now on PI 7.0 SP13 and removed the Hostbind value and that works just fine. We are using virtual hostname with VCS and failover the hostname to the alternate host. This seemed to work just fine in our DR test scenario integrated testing (in this test we did not run any actual load against our systems, but all checks were normal).
Hope that helps.

Can not start Visual Administrator (halt at 99%)

Hi,
When I start Visual Administrator, its status halt at 99%.
Visual Administrator can not open normally.
The version is EP7.0 SP11.
Could anyone help me? thanks!

Hi Chai Ming,
Can you see anything in the log files? Perhaps it's a permissions issue?
Try creating a brand new connection from scratch rather than using the default and connect using that and generaly a server restart will do the trick in fixing it. Although clearly this is not a long term solution.
Visual Administrator is being replaced by the web administrator located http://<host>:<port>/nwa.
If you cannot restart or find a fix you might like to simply start using the webinterface when possible.
Not a solution I know, but thought the tip might help.
Cheers

Problem when login to Visual Administrator

Similar Messages

Maybe you are looking for