Problem while assigning service activity to WBS

when i assign service activity to WBS element without filling any fields (like Purchase groupand Material group) it is going straight to Service Specifications.
if we fill the service specifications and save the project we can save the project with out any errors
i require entry of PurchaseGroup and Material Group is mandatory
and then system should go to Service specifications
Please advice

Hi,
Just check in Network profile, on Activity tab (TC: OPUU). You must have maintained required details like Material group, Purchasing group etc in Service activity section. Whenever you create a service activity these values get defaulted in activty. Let me know if it solves your problem.
Reward points if helpful.
Regards
Message was edited by:
Shrikant Rakate

Similar Messages

Regarding problem while assigning logical system

Hi Friends,
I had a problem while assigning logical system to the client where in both of my systems are having same client number which belong to 2 different systems.
while assigning the sender and receiver logical system to the same client i am facing problem stating that an entry has already been made for the same key.
could any one plz give me a clear idea...while assigning logical systems (cross clients) for 2 different systems having same client number.
Regards,
Madhu

Hello Madhusree,
I'm running with same problem. I've created two logical systems and assigned them to two different clients. But here pops up the issue while generating partner profiles, throwing error "No active plan version exists". Later when I researched about the issue, I came to know that T77S0 table doesn't have any entries regarding plan versions. Basically, I created two clients by doing "client copy" from source client (800 & 100). And I could see plan version entries in the T77S0 of client 800. So, I thought of assigning just defined logical system to the source client 800 itself. But it throws error saying "entry already exists"; as client (800) is already assigned with other logical system.
By coming across your post, gives me leap of hope that two logical systems can be assigned to same client. Could you please share me those troubleshooting steps concerning this issue. Points will be awarded.
Regards, Anil.

Problem while Creating Service order through Work Order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Closed..

Problem while creating Service order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Hi Murgesh,
If GL code is not getting bydefault from the system it is needed to be provided by the user.
If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
it is avalible in deafult settings in order node
If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
But if your PO is not w.r.t. PM orders PR then needs to be given manully.
Ramesh
Edited by: RameshChandra Soni on Jul 25, 2008 8:16 AM

Problem while assigning multiple staffing to project role.

Dear All,
I am facing problem while assigning multiple staffing to project role.
In the project role, we are doing staffing ( assigning BP). While assigning the BP's getting below errors.
Resource assignments overlap
Message no. DPR_BUPA_LINK004
Diagnosis
The validity period '10.02.2008'-'01.03.2008' for the assignment of project role Product Manager and ' Rakesh Pradhan' overlaps with the validity period of the assignment ''.
However, the project role type does not allow several staffings to be edited at the same time in the project role.
System Response
The system does not allow this constellation of data when saving.
Procedure
Check and correct the start and finish dates of the staffings affected.
Request you to advise in fiixng the issue.
Thank you for your cooperation.
Regards,
Ranjan

Hi Biplab,
For multiple staffings in the same time frame, check the option of 'Edit in Parallel' in the Role Type settings in SPRO.
Let me know if that helps.
Regards,
Vivek Pandey

Problem while assigning user dynamically!!

Hi ALL,
I am doing a process for my understanding, I have a problem while dynamically assigning a user to a action. These are the steps that I followed.
I have created a process with one seq block.
-sec block
--Action 1(WD Form containing 3 Input/output fields)
--Action 2(WD form with some text,1 input-User Name)
--Action 3(wD form with some text, 1 input-User name)
--Action 4(wD form with some text, 1 input-User name)
I have mapped the output of the first form to the respective inputs of the actions.
I have also set the "Fill from context" with the input for the respective action.
When I run the process I give the unique user id as input. I get a error "Cannot complete action: The activity could not be read." I did this thinking that the user given as input will be assigned to the processor of the respective action. Correct me if I am wrong.
Kindly help me in solving this issue.

Hi,
Your main requirement is to assign the user to actions dynamically. But your way is not correct. Using sequencial block you can not do it. You need to use Parallel dynamic block and dynamic user assignment. Here is the clear step by step doc. Please open and go through it.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fe43ced1-0c01-0010-10ae-bc49598b18f6
I think your requirement will be solved.
Thanks
Chandan

Problem while assigning the fields of EBM to ABM in Provider

Hi All,
I am facing a problem with the fields of EBM not being able to Assign to ABM in ProviderBPEL
In RequestorABCSImpl, i am transforming a ABM to SupplierPartyEBM(CreateSupplierPartyListEBM is the type i am using)
Field called 'PayementTerm' is being mapped as below
<corecom:PaymentTerm>
<corecom:Code>
<xsl:value-of select='dvm:lookupValue(concat("oramds:/apps/AIAMetaData/dvm/","SY_SUPPLIERPARTY_TERMTYPE",".dvm"),"MULTISYS_01",tnsaboabo:PaymentTerm/text(),"COMMON",aia:getServiceProperty($ServiceName,"SyncSupplierPartyList.PaymentTerm.Code",false()))'/>
</corecom:Code>
</corecom:PaymentTerm>
after transform I am able to see the value for PaymentTerm/Code while testing requestor.
Now in provider I am using an Assign activity to assign 'PaymentTerm/Code' to ABM field called 'termID '
Here
'PaymentTerm/Code' is a TermType
'termID ' is a string.
When i test end to end
i am getting an error while assigning 'PaymentTerm/Code' to 'termID'
Error i am getting is "Error in evaluate<from expression at line 677. the result is empty for xpath expression inputvariable/./../PaymentTerm/Code
Please guide me what is wrong in this. In Input Payload i am able to see the value coming in provider but while assigning i'ts failing

This is the input xml
<CreateSupplierPartyListReqMsg><part name="CreateSupplierPartyListEBM" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><CreateSupplierPartyListEBM xmlns="http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1" xmlns:wsa="http://www.w3.org/2005/08/addressing">
<EBMHeader xmlns:fpsdataabo="http://xmlns.cassini.telenor.com/FPS/SupplierParty/V1" xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2" xmlns="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:EBMID>2d323432363737383037393633373932</corecom:EBMID><corecom:EBMName>{http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1}CreateSupplierPartyListEBM</corecom:EBMName><corecom:EBOName>{http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1}SupplierPartyEBO</corecom:EBOName><corecom:CreationDateTime>2012-12-07T08:51:15.135+01:00</corecom:CreationDateTime><corecom:VerbCode>Create</corecom:VerbCode><corecom:MessageProcessingInstruction><corecom:EnvironmentCode>PRODUCTION</corecom:EnvironmentCode></corecom:MessageProcessingInstruction><corecom:Sender xmlns="http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1" xmlns:ebo="http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1" xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions" xmlns:hashmap="http://www.oracle.com/XSL/Transform/java/java.util.HashMap"><corecom:ID>MULTISYS_01</corecom:ID><corecom:CallingServiceName>{http://xmlns.oracle.com/ABCSImpl/Multisys/Core/SyncSupplierPartyListMultisysReqABCSImpl/V1.0}SyncSupplierPartyListMultisysReqABCSImpl</corecom:CallingServiceName><corecom:Custom xmlns:xacml="urn:oasis:names:tc:xacml:2.0:context:schema:cd:04" xmlns:tnsaboabo="http://xmlns.cassini.telenor.com/Multisys/SupplierParty/V1"><corecom:LegalEntityReference><corecom:LegalEntityIdentification><corecom:ID/></corecom:LegalEntityIdentification></corecom:LegalEntityReference></corecom:Custom></corecom:Sender><corecom:Target><corecom:ID>EBIZ_01</corecom:ID></corecom:Target><corecom:BusinessScope><corecom:ID>Supplier Party - 0000001</corecom:ID><corecom:InstanceID>CreateSupplierPartyList/32313433363838393939393637303532</corecom:InstanceID><corecom:BusinessScopeTypeCode>BusinessProcess</corecom:BusinessScopeTypeCode><corecom:EnterpriseServiceName>{http://xmlns.oracle.com/EnterpriseServices/Core/SupplierParty/V1}SupplierPartyEBSV1</corecom:EnterpriseServiceName><corecom:EnterpriseServiceOperationName>CreateSupplierPartyList</corecom:EnterpriseServiceOperationName></corecom:BusinessScope><corecom:BusinessScope><corecom:ID>CreateSupplierPartyListReqMsg</corecom:ID><corecom:InstanceID>CreateSupplierPartyListReqMsg/2d323432363737383037393633373932</corecom:InstanceID><corecom:BusinessScopeTypeCode>Message</corecom:BusinessScopeTypeCode><corecom:EnterpriseServiceName>{http://xmlns.oracle.com/EnterpriseServices/Core/SupplierParty/V1}SupplierPartyEBSV1</corecom:EnterpriseServiceName><corecom:EnterpriseServiceOperationName>CreateSupplierPartyList</corecom:EnterpriseServiceOperationName></corecom:BusinessScope><corecom:EBMTracking><corecom:SequenceNumber>1</corecom:SequenceNumber><corecom:ExecutionUnitID/><corecom:ExecutionUnitName>{http://xmlns.oracle.com/EnterpriseFlows/Core/SyncSupplierPartyListEBF/V1}SyncSupplierPartyListEBFV1</corecom:ExecutionUnitName><corecom:ImplementationCode>BPEL</corecom:ImplementationCode><corecom:ActivityDateTime>2012-12-07T08:51:15.136+01:00</corecom:ActivityDateTime></corecom:EBMTracking><xacml:Request xmlns:xacml="urn:oasis:names:tc:xacml:2.0:context:schema:cd:04"/></EBMHeader>
<DataArea><corecom:Create xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"/><ebo:SyncSupplierPartyList xmlns:ebo="http://xmlns.oracle.com/EnterpriseObjects/Core/EBO/SupplierParty/V1"><corecom:Identification xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:ID schemeID="SY_SUPPLIERPARTY_SUPPLIERPARTYID" schemeAgencyID="XREF">33363339373538363835333734303432</corecom:ID><corecom:ContextID>c</corecom:ContextID><corecom:ApplicationObjectKey><corecom:ID schemeID="VENDOR_NUMBER" schemeAgencyID="MULTISYS">0000001</corecom:ID></corecom:ApplicationObjectKey></corecom:Identification><corecom:PartyLocation xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:Identification><corecom:ApplicationObjectKey><corecom:ID>0000001</corecom:ID></corecom:ApplicationObjectKey></corecom:Identification><corecom:LocationReference><corecom:Address><corecom:LineOne>Hillev?gsv 24</corecom:LineOne><corecom:LineTwo>Hillev?gsv 24</corecom:LineTwo><corecom:LineThree>Hillev?gsv 24</corecom:LineThree><corecom:LineFour>Hillev?gsv 24</corecom:LineFour><corecom:CityName>STAVANGER</corecom:CityName><corecom:PostalCode>4016</corecom:PostalCode></corecom:Address></corecom:LocationReference></corecom:PartyLocation><corecom:PartyContact xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:Contact><corecom:PersonName><corecom:FirstName>Nordialog Stavanger</corecom:FirstName></corecom:PersonName></corecom:Contact></corecom:PartyContact><corecom:Organization xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:Name>Nordialog Stavanger</corecom:Name><corecom:LegalStructureCode>00</corecom:LegalStructureCode><corecom:OrganizationFinancialProfile><corecom:FinancialProfile><corecom:FinancialAccount><corecom:AccountNumber>54130613600</corecom:AccountNumber><corecom:TypeCode>SUPPLIER</corecom:TypeCode><corecom:CurrencyCode>NOK</corecom:CurrencyCode></corecom:FinancialAccount></corecom:FinancialProfile></corecom:OrganizationFinancialProfile></corecom:Organization><ebo:CustomerNumber>0000001</ebo:CustomerNumber><ebo:MinimumOrderAmount>0</ebo:MinimumOrderAmount><ebo:TypeCode>VENDOR</ebo:TypeCode><ebo:OneTimeIndicator>false</ebo:OneTimeIndicator><ebo:SupplierPartyTradingLocationProfile><corecom:Identification xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:ID schemeID="SY_SUPPLIERPARTY_SUPPLIERPARTYTRADINGLOCATIONPROFILEID" schemeAgencyID="XREF">2d323735363933313339333732353537</corecom:ID><corecom:ApplicationObjectKey><corecom:ID schemeID="VENDOR_NUMBER" schemeAgencyID="MULTISYS">0000001</corecom:ID></corecom:ApplicationObjectKey></corecom:Identification><ebo:PrimaryIndicator>true</ebo:PrimaryIndicator><ebo:FreightTermsCode/><ebo:HoldReasonCode/><ebo:InvoiceCurrencyCode/><ebo:PaymentCurrencyCode/><ebo:PaymentPriorityCode>99</ebo:PaymentPriorityCode><ebo:TermsDateBasisCode/><ebo:VATTaxCode>SY25VAT</ebo:VATTaxCode><ebo:VATRegistrationNumber/><ebo:ExcludeFreightFromDiscountIndicator>false</ebo:ExcludeFreightFromDiscountIndicator><ebo:PurchasingEnabledIndicator>false</ebo:PurchasingEnabledIndicator><ebo:RFQOnlyIndicator>false</ebo:RFQOnlyIndicator><corecom:PaymentTerm xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:Code>6 DAYS</corecom:Code></corecom:PaymentTerm><ebo:TradingLocationProfileAddress><corecom:Address xmlns:corecom="http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2"><corecom:LineOne>Hillev?gsv 24</corecom:LineOne><corecom:LineTwo>Hillev?gsv 24</corecom:LineTwo><corecom:CityName>STAVANGER</corecom:CityName><corecom:PostalCode>4016</corecom:PostalCode></corecom:Address></ebo:TradingLocationProfileAddress></ebo:SupplierPartyTradingLocationProfile></ebo:SyncSupplierPartyList></DataArea>
</CreateSupplierPartyListEBM></part></CreateSupplierPartyListReqMsg>
And my assign is
bpws:getVariableData('CreateSupplierPartyListReqMsg','CreateSupplierPartyListEBM','/WL5G3N2ebo:CreateSupplierPartyListEBM/WL5G3N2ebo:DataArea/WL5G3N2ebo:CreateSupplierPartyList/WL5G3N2ebo:SupplierPartyTradingLocationProfile/corecom:PaymentTerm/corecom:Code') to an 'invoke_InputVariable/termid'

Service Activity to WBS

Hi All,
I am trying to create create a service activity through CJ20n
my requirement is Acount assignment category should be "P" and Item Category "D"
I have changed the setting in OPTT that Acct. assgmt.gen N to P.
In that case it is allowing me to create PR with "P" & "D" but the WBS field not getting updated insted it is taking the Network no and activity no .
can u pls suggest any change in SPRO which will solve the purpose.
thanks in advance
Hemant

Let me add few more things...
You can create Purchae requisition with Acct. Assg. P and Item Catg. D with ME51N.
Where you have to Service No. and in Account Assignment TAB system ask you G/L acct and WBSE /Network-Activity.
Hope this would help you.
Regards
Sujit

Problem while creating service po

HI GURU'S
i am facing problem that while creating service po , in delivery schedule tab system allows only one possible date , but my service quantity is 10 and i need to add 10 different date for 10 quantities , as service will deliver at 10 different days , so how should i maintain different delivery schedule dates
regards

Hi Akshay,
The date in the schedule delivery wont affect much,
you can create the Service PO with single line item, 10 Quantity and can make 10 different SES as per the requirement.
if furthet you want to make sure that the SES should be created within the given period of time then you can use the blanket PO also.
Hope it helps you.
Regards,
Yawar Khan

Error while putting service activity

Hi experts,
On puting service activity in a network, system has given following message 'Error in committment check (See costing log)'. Cost log says 'Planning level M1 does not exist' please correct your entry or maintain the planning level.
I'm sure this is not in connection with the budget availability control because the control is not active.
What could have gone wrong?
Has anyone got some idea?
Thanks,
Mohan Parab

Issue resolved.
Planning group in CFM was disturbed.
Regards,
Mohan Parab

Problem while assigning Servlet to Execute queue

Hi,
We implement a IMS S-CSCF on BEA container 2.2.
A call for us may be several times reentrant. Meaning that for one call we have to handle at least three different dialogs but in major use cases, it will be 6 or 7 for our next deployment.
We are currently facing to bottlenecks problems and BEA support advised me to try to check if assigning servelt to execute queue could improve the preformances.
I just wanted to make a try with one of our servlet but I have an exception java.lang.NoClassDefFoundError: org/jaxen/JaxenException.
Here is what I did:
In web.xml I have:
<web-app>
<distributable/>
<servlet>
<servlet-name>register</servlet-name>
<servlet-class>com.netcentrex.scscf.registrar.RegistrarServlet</servlet-class>
<init-param>
<param-name>wl-dispatch-policy</param-name>
<param-value>REGISTRARQueue</param-value>
</init-param>
<load-on-startup/>
</servlet>
<listener>
<listener-class>com.bea.wcp.sip.engine.server.ContextEventHook</listener-class>
</listener>
</web-app>
In sip.xml I have:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sip-app
PUBLIC "-//Java Community Process//DTD SIP Application 1.0//EN"
"http://www.jcp.org/dtd/sip-app_1_0.dtd">
<sip-app>
<display-name>SIP Servlet based Registrar</display-name>
<distributable/>
<context-param>
<param-name>usc.configFile</param-name>
<param-value>/etc/neotip/usc.ini</param-value>
</context-param>
<context-param>
<param-name>icscf.configFile</param-name>
<param-value>/etc/neotip/icscf.ini</param-value>
</context-param>
<context-param>
<param-name>usc.dnsSrvFile</param-name>
<param-value>/etc/neotip/uscDnsSrv.cache</param-value>
</context-param>
<listener>
 <listener-class>com.netcentrex.scscf.session.SessionServlet</listener-class>
</listener>
<servlet>
<servlet-name>register</servlet-name>
<servlet-class>com.netcentrex.scscf.registrar.RegistrarServlet</servlet-class>
<load-on-startup/>
</servlet>
<servlet>
 <servlet-name>session</servlet-name>
 <servlet-class>com.netcentrex.scscf.session.SessionServlet</servlet-class>
 <load-on-startup/>
</servlet>
<servlet>
 <servlet-name>route</servlet-name>
 <servlet-class>com.netcentrex.scscf.fork.RouteServlet</servlet-class>
 <load-on-startup/>
</servlet>
<servlet>
 <servlet-name>icscf</servlet-name>
 <servlet-class>com.netcentrex.scscf.embeddedI.IEmbeddedServlet</servlet-class>
 <load-on-startup/>
</servlet>
<servlet-mapping>
<servlet-name>register</servlet-name>
<pattern>
<equal>
 <var>request.method</var>
 <value>REGISTER</value>
</equal>
</pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>session</servlet-name>
<pattern>
 <and>
 <not>
 <equal>
 <var>request.method</var>
 <value>REGISTER</value>
 </equal>
 </not>
 <not>
 <exists>
 <var>request.uri.param.uscroute</var>
 </exists>
 </not>
 <not>
 <exists>
 <var>request.uri.param.icscfroute</var>
 </exists>
 </not>
 </and>
</pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>route</servlet-name>
<pattern>
 <and>
 <not>
 <equal>
 <var>request.method</var>
 <value>REGISTER</value>
 </equal>
 </not>
 <exists>
 <var>request.uri.param.uscroute</var>
 </exists>
 </and>
</pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>icscf</servlet-name>
<pattern>
 <and>
 <not>
 <equal>
 <var>request.method</var>
 <value>REGISTER</value>
 </equal>
 </not>
 <exists>
 <var>request.uri.param.icscfroute</var>
 </exists>
 </and>
</pattern>
</servlet-mapping>
<session-config>
 <session-timeout>30</session-timeout>
</session-config>
</sip-app>
In msi-config.xml, we have:
<Server Cluster="BEA_ENGINE_TIER_CLUST" EnabledForDomainLog="false"
ListenAddress="192.168.150.26" ListenPort="8001" Name="engine1"
NativeIOEnabled="true" NetworkAccessPoints="sipchannel"
ServerVersion="8.1.5.0" StdoutDebugEnabled="true"
StdoutEnabled="true" StdoutSeverityLevel="64">
<NetworkAccessPoint ListenAddress="192.168.150.34"
ListenPort="5060" Name="sipchannel" Protocol="sip"
PublicAddress="192.168.150.34" SourcePorts="41000-42000"/>
<SSL Enabled="false" IdentityAndTrustLocations="KeyStores" Name="engine1"/>
<Log FileCount="10" FileMinSize="60000" Name="engine1" NumberOfFilesLimited="true"/>
<ExecuteQueue Name="sip.transport.Default" QueueLength="2048" ThreadCount="25"/>
<ExecuteQueue Name="REGISTRARQueue" QueueLength="2048" ThreadCount="25"/>
<ExecuteQueue Name="sip.transport.Default" QueueLength="2048" ThreadCount="25"/>
<ExecuteQueue Name="weblogic.kernel.Default"/>
<ExecuteQueue Name="sip.timer.Default" QueueLength="2048" ThreadCount="25"/>
<ExecuteQueue Name="sip.tracing.local" QueueLength="1024"
ThreadCount="1" ThreadsMaximum="1" ThreadsMinimum="1"/>
<ExecuteQueue Name="sip.tracing.domain" QueueLength="1024"
ThreadCount="1" ThreadsMaximum="1" ThreadsMinimum="1"/>
</Server>
Then when I launch a SIP REGISTRATION operation I get the following trace:
2007-05-30 17:37:03,649 ERROR RegistrarServlet [ExecuteThread: '23' for queue: 'sip.transport.Default'] : Error while processing request: REGISTER sip:netcentrexbench.net SIP/2.0
P-Charging-Vector: icid-value=AyretyU0dm+1970294253=0465138796
P-Access-Network-Info: ADSL;dsl-location="netcentrexbench.net;1.2.3.4"
CSeq: 2 REGISTER
Call-ID: [email protected]
Supported: path
Via: SIP/2.0/UDP 192.168.254.56:5063;branch=z9hG4bK-19606-1-2
From: dench0 <sip:[email protected]>;tag=1
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO
To: dench0 <sip:[email protected]>
Authorization: Digest username="dench0",realm="netcentrexbench.net",cnonce="6b8b4567",nc=00000001,qop=auth,uri="sip:192.168.150.34:5060",nonce="NQei3RIBAAA=le+kkCcrZcahXxQ7M6r7dw==",response="b824a93822b267ddfaa07f4039d99d95",algorithm=MD5
Content-Length: 0
Contact: sip:[email protected]:5063
User-Agent: LYNX_BENCH
Path: <sip:[email protected]:5063;lr>
Require: path
Expires: 36000
Max-Forwards: 70
java.lang.NoClassDefFoundError: org/jaxen/JaxenException
at org.dom4j.DocumentFactory.createXPath(DocumentFactory.java:230)
My first doubt is that I think I should get "ERROR RegistrarServlet [ExecuteThread: '23' for queue: 'REGISTRARQueue'] " instead of "ERROR RegistrarServlet [ExecuteThread: '23' for queue: 'sip.transport.Default'] "
First question: did I miss something or did something wrong in the configuration?
Second question: is it really possible to assign a single servlet (from an application containing many other servlets) to a dediacted execute queue?
Third question: any help is welcome :-)
Thanks in advance,
Lionel,

At teh end I found the basic :-) problem on my exception but anyway , the used execute queue for REGISTER is always sip.transport.default
Help on this point is welcome!
Thanks

Problem while assigning smartform in NACE

Hi all,
I am getting the following error while trying to assign a Z-smartform in NACE transaction. Rewards assured
Diagnosis
For output type NEU and transmission medium 8 an entry has been maintained in the table of processing programs, but in this entry no processing program has been specified.
System Response
When the output will be processed later on, it cannot be issued.
Procedure
Specify at least one processing program and one processing routine in this program.

Hello Jai,
I just received the same error while updating our PO.
In my case, the problem was that medium "Special function" had an entry line with no program assigned. This was set up in the original configuration of the system, and since I had only changed the "Print output" entry, I wasn't sure what was causing the message.
Since the "Special function" entry was blank, I tested that to see if it was the issue. Removing that entry did eliminate the message.
Since the message I received was an informational message, an alternative method to proceed was by simply hitting "Enter" when the message appeared. I don't see why a blank entry would be required, but since I didn't do the original system configuration, this was the method I chose so as to not change any existing settings other than for the Smartform on which I was working.
This is an old thread, but I thought I would add this information in case anyone stumbles across it while searching for information about this error (which is how I found the thread.)
Blaine

Error in requirement class while assigning service order type.

Hello All,
I am getting below error message whenever I am trying to assign a service order type to requirement class.
This the error meassage:
Maintenance order type ZSC3 is either not flagged as a service order type or revenue posting is allowed for this order type.
System Response
The system does not allow any further processing.
Procedure
Enter a service order type that does not allow revenue postings.
Please help urgently.
Best regards,
Partha Das

Ya do same thing but I dont think using this FM will solve the problem...
You get the Update Terminated message when the normal course of the program has been halted by user intervention.
Now could u please check that are u calling any FM in your program.
If yes just list out all of them.
Thanks.

Problem while creating service PO using bapi_po_create1

hi all,
i am getting error :
In case of account assignment, please enter acc. assignment data for item
what does this mean?
please help,,
thanks,
Siddhartha Prakash

Hi Sid.
I'm having this same problems on creating PO Service. Did you solve it? How did you do that?
I'm using a PR and the Category is 'Y', and I cant find where is the problem.
The tables that I'm passing to the BAPI_PO_CREATE1 are:
POITEM/ POITEMX
POACCOUNT/ POACCOUNTX
POSERVICES
POSRVACCESSVALUES
Please, if you have any idea, let me know!
Tks a lot!
Renata

Problem while applying service packs

Hi All,
We installes SAP ERP 6.0 SR3 ABAP+JAVA(Central instance).
We are trying to import SAP_BASIS service packs from SP13 to SP14, SP15....
we started import through spam in the down status it is showing 'CMDIMPORT finished with returncode 0'
We opened MMC and checked work processsers
ALL DIA showing
Program SAPMSSY1 client 001 User PILDUSER Time 7000
SP) showing
Program 'job activation' client 000 User SAPSYS Action Update Table TSPOPTIONS
How to resolve this issue ?
How to find the problem?
What are the logs i have to check?
SPAM got Struck?
Regards,
Phanikumar.

Hi,
The avilable drive space is 82GB.
Tell me how to check the table and archive space.
developer trace for one of the work processor dev_w09
trc file: "dev_w9", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 04
M sid ECC
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 236
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3588
M
M
M Fri Apr 09 10:34:15 2010
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 9 3588) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Fri Apr 09 10:34:16 2010
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FA00050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000FA00050
M DpShMCreate: allocated wp_adm at 000000000FA02270
M DpShMCreate: allocated tm_adm_list at 000000000FA096D0
M DpShMCreate: allocated tm_adm at 000000000FA09730
M DpShMCreate: allocated wp_ca_adm at 000000000FFACFB0
M DpShMCreate: allocated appc_ca_adm at 000000000FFB2DB0
M DpShMCreate: allocated comm_adm at 000000000FFB4CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001003B980
M DpShMCreate: allocated gw_adm at 000000001003BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001003BA30
M DpShMCreate: allocated wall_adm at 000000001003BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 9 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: running on host ecc6
M
M Fri Apr 09 10:34:17 2010
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\ECC\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\ECC\DVEBMGS04\exe\dboraslib.dll' loaded
B
B Fri Apr 09 10:34:18 2010
B Version of 'F:\usr\sap\ECC\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.234)
B New connection 0 created
C Prepending F:\usr\sap\ECC\DVEBMGS04\exe to Path.
C
C Fri Apr 09 10:34:19 2010
C Oracle Client Version: '10.2.0.4.0'
C application info callback registered
C
C Fri Apr 09 10:34:20 2010
C Client NLS setting (OCINlsGetInfo): connection handle 0 -> 'AMERICAN_AMERICA.UTF8'
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
C Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
C 0 UTF8 0000000012720080 0000000012727BD0 0000000012738328
C Attaching to DB Server ECC (con_hdl=0,svchp=00000000127381E8,srvhp=000000001273B238)
C
C Fri Apr 09 10:34:21 2010
C Starting user session: OCISessionBegin(con_hdl=0, usr='/',svchp=00000000127381E8, srvhp=000000001273B238, usrhp=00000000127931C0)
C
C Fri Apr 09 10:34:22 2010
C CbApplInfoGet() failed (ignored 1).
C Now '/@ECC' is connected: con_hdl=0, nls_hdl=0, session_id=1054.
C
C Fri Apr 09 10:34:23 2010
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=00000000127381E8,usrhp=00000000127931C0)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
C Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
C 0 UTF8 0000000012720080 0000000012727BD0 0000000012738328
C Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>, svchp=00000000127381E8, srvhp=000000001273B238, usrhp=00000000127931C0)
C Now 'SAPSR3/<pwd>@ECC' is connected: con_hdl=0, nls_hdl=0, session_id=1077.
C Database NLS settings in V$NLS_PARAMETERS: AMERICAN_AMERICA.UTF8
C
C Fri Apr 09 10:34:24 2010
C DB instance ECC is running on ECC6 with ORACLE version 10.2.0.4.0 since APR 09, 2010, 10:30:44
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20100409 103418 ECC6
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif,*.png
I
I Fri Apr 09 10:35:49 2010
I MtxInit: 9 0 0
M SHM_PRES_BUF (addr: 0000000014010050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014450050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001C460050, size: 2760892)
M SHM_PAGING_ADM (addr: 00000000091D0050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0000000009700050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 00000000003E0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 9 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M Deactivate statistics hyper index locking
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 000000001C7A00E0, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 000000001C7A0330, size: 320072)
B dbntab: Buffer FTAB(item array) (addr: 000000001C7EE580, size: 1280000)
B dbntab: Buffer FTAB(data area) (addr: 000000001C926D80, size: 30720000)
B dbntab: Buffer IREC(hash header) (addr: 000000001E6800E0, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 000000001E680330, size: 320072)
B dbntab: Buffer IREC(item array) (addr: 000000001E6CE580, size: 320000)
B dbntab: Buffer IREC(data area) (addr: 000000001E71C780, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 000000001ED000E0, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 000000001ED00330, size: 320072)
B dbntab: Buffer STAB(item array) (addr: 000000001ED4E580, size: 320000)
B dbntab: Buffer STAB(data area) (addr: 000000001ED9C780, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 000000001F0900E0, size: 2360)
B dbntab: Buffer TTAB(anchor array) (addr: 000000001F090A20, size: 320072)
B dbntab: Buffer TTAB(item array) (addr: 000000001F0DEC70, size: 800000)
B dbntab: Buffer TTAB(data area) (addr: 000000001F1A2170, size: 5840000)
B db_con_shm_ini: WP_ID = 9, WP_CNT = 17, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 000000001F74D0B0)
B dbtbxbuf: Buffer TABL (addr: 0000000022250160, size: 30000000, end: 0000000023EEC4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000023EF0160, size: 10240000, end: 00000000248B4160)
B dbexpbuf: Buffer EIBUF (addr: 00000000248C0170, size: 4194304, end: 0000000024CC0170)
B dbexpbuf: Buffer ESM (addr: 0000000024CD0170, size: 4194304, end: 00000000250D0170)
B dbexpbuf: Buffer CUA (addr: 00000000250E0170, size: 3072000, end: 00000000253CE170)
B dbexpbuf: Buffer OTR (addr: 00000000253D0170, size: 4194304, end: 00000000257D0170)
B dbcalbuf: Buffer CALE (addr: 00000000257E0050, size: 500000, end: 000000002585A170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
Please check and give me the solution.
Regards,
Phanikumar.

Problem while assigning service activity to WBS

Similar Messages

Maybe you are looking for