Problem while defining Busiiness System

Hi,
We are using Xi 3.0 , CCM 2.0 , SRM 5.0 and we need to import material from SRM to CCM.
while creating the Business System in SLD, where we have to specify the role of Business System As an Application System or Integration Server, we have to give Application System, But with it we have to specify the Integration Server also which should come by default in the dropdown list, but it is showing that no integration server has been defined.
Can anybody tell me what is the problem??
Regards,
Swetha

Hi Vishal,
Check if there is a Business System defined for your XI system as a Integration Server.
If confused, follow these steps:-
Create a TS for the XI server and specify the details. Then assign this to your BS, making the role as a integration server and the Pipeline URL:
http://<servername>:8000/sap/xi/engine?type=entry
Go thro' this link:-
http://help.sap.com/saphelp_nw04/helpdata/de/31/f0ff69551e4f259fdad799a229363e/frameset.htm
I hope this provides you a solution.
Regards
Praveen

Similar Messages

Regarding problem while assigning logical system

Hi Friends,
I had a problem while assigning logical system to the client where in both of my systems are having same client number which belong to 2 different systems.
while assigning the sender and receiver logical system to the same client i am facing problem stating that an entry has already been made for the same key.
could any one plz give me a clear idea...while assigning logical systems (cross clients) for 2 different systems having same client number.
Regards,
Madhu

Hello Madhusree,
I'm running with same problem. I've created two logical systems and assigned them to two different clients. But here pops up the issue while generating partner profiles, throwing error "No active plan version exists". Later when I researched about the issue, I came to know that T77S0 table doesn't have any entries regarding plan versions. Basically, I created two clients by doing "client copy" from source client (800 & 100). And I could see plan version entries in the T77S0 of client 800. So, I thought of assigning just defined logical system to the source client 800 itself. But it throws error saying "entry already exists"; as client (800) is already assigned with other logical system.
By coming across your post, gives me leap of hope that two logical systems can be assigned to same client. Could you please share me those troubleshooting steps concerning this issue. Points will be awarded.
Regards, Anil.

Problem While Defining "VALUE SET"

Dear All,
I am finding problems while defining "Value Set".
I wanted to select "DISTINCT" Column from a particular Table.
It is not allowing me to select distinct Column.
Is there any other alternative ??

Hi Tarak,
Create a view selecting distinct values and then use this view as a table in your value set.
Vishal

Problems while defining EJB relations for container managed bean

I am having a problem while trying to create my relations for my container managed bean.
My Database schema is:
Order table
order_id
message
WorkItem table:
order_id
item_id
message
I have defined my OrderBean to have:
@LocalMethod()
@CmrField
public abstract Collection getCmWorkItemsCmr();
@LocalMethod()
public abstract void setCmWorkItemsCmr(Collection workItems);
I am not sure how to define my relation for my class:
@Relation(cmrField = "cmWorkItemsCmr", multiplicity = Relation.Multiplicity.MANY, name = "Orders-CmWorkItems")
An order can have many workitems. I am not sure how to fill in the rest for foreign Key jointable and such.
Any help pointing me in the right direction would be helpful.
Thanks,
Ian

I am having a problem while trying to create my relations for my container managed bean.
My Database schema is:
Order table
order_id
message
WorkItem table:
order_id
item_id
message
I have defined my OrderBean to have:
@LocalMethod()
@CmrField
public abstract Collection getCmWorkItemsCmr();
@LocalMethod()
public abstract void setCmWorkItemsCmr(Collection workItems);
I am not sure how to define my relation for my class:
@Relation(cmrField = "cmWorkItemsCmr", multiplicity = Relation.Multiplicity.MANY, name = "Orders-CmWorkItems")
An order can have many workitems. I am not sure how to fill in the rest for foreign Key jointable and such.
Any help pointing me in the right direction would be helpful.
Thanks,
Ian

Problem While Creating New system

Hi.
i have downloaded sap netweaver 7.01(trail version) from SCN.
installation was successful.
Frontend GUI was installed in System Drive(C Drive)
and Netweaver was installed in D Drive
i have started the application server.
in the logon pad what are the details i need to enter while creating new systems in logon pad.
i followed help and typed the same info as in the f1 help.
in connection tab:
connection type: Custom Application Server
System connection parameters:
Description: SAP
Application Server : u9cmain (as in f1 help)
System Number: 00(as in f1 help)
System ID: u9c(as in f1 help)
SAProuter Sring: (empty)(as in f1 help)
after giving this details. when i logged in it shows this "hostname u9cmain unknown, check your application server name"
how can i rectify this error. where can i check my application server name...
help me out plz.

>i followed help and typed the same info as in the f1 help.
You can't use the same host name and SIDs as per help under F1
Configure as below:
Description: SAP (You can use anything)
Application Server : (your computer name or IP address)
System Number: (has to be 2 digit, and which numbers you have assiged while installation)
System ID: (your instance name)
SAProuter Sring: (not required)

Problem while creating Logical System Connecting Portal to ECC (Backend)...

Hi
- I am trying to connect portal to ABAP so that from portal's iView i could access any ABAP T-Code (e.g. SE37).
- Secondly, just wanted to let you know that i am not implementing SSO.
- I used iView's SAP GUI Type = SAP GUI for HTML.
I made following 3 tests, out of which ITS connection is failed. and while previewing my iView i m not able to connect with ABAP and giving error: "The URL http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui was not called due to an error."
Could u pls guide me what to do.... And i mentioned everything at the bottom in detail.
Thanks & looking forwarded for your replies.....
SAP Web AS Connection (Successful)
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (192.168.1.104:8001)
5. The host name 192.168.1.104 was resolved successfully.
6. The server 192.168.1.104 was pinged successfully.
7. The Web AS ping service http://192.168.1.104:8001/sap/bc/ping was pinged successfully.
8. An HTTP/S connection to http://192.168.1.104:8001/sap/bc/bsp/sap was obtained successfully.
ITS Connection (Failed)
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Pings the server to see if it is alive.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (192.168.1.104:8001)
6. The host name 192.168.1.104 was resolved successfully.
7. The server 192.168.1.104 was pinged successfully.
8. User mapping is valid
9. An HTTP/S connection to http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui/ was not obtained successfully; this might be due to a closed port on the Firewall.
Test Connection with Connector (Successful)
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
1. Retrieval of default alias successful.
2. Connection successful.
I am getting following error while Previeiwng iView.
Error when processing your request
What has happened?
The URL http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui was not called due to an error.
Note
The following error text was processed in the system D10 : Template interpretation cancelled, syntax error.
The error occurred on the application server eccdcs1s_D10_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      SYSTEM-EXIT of program SAPLSFUNCTION_BUILDER
      Function: RS_FUNCTION_INITIAL_SCREEN of program SAPLSFUNCTION_BUILDER
      Method: IF_WB_PROGRAM~PROCESS_WB_REQUEST of program CL_FB_FUNCTION_INITIAL_SCREEN=CP
      Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR===============CP
      Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR_VIS_AS_DYNPRO=CP
      Method: PROCESS_WB_REQUEST of program CL_WB_MANAGER=================CP
      Method: PROCESS_REQUEST_QUEUE of program CL_WB_MANAGER=================CP
      Method: IF_WB_MANAGER~SET_WORKSPACE of program CL_WB_MANAGER=================CP
      Method: START_INTERNAL of program CL_WB_STARTUP=================CP
      Module: MANAGER_START of program SAPLWB_MANAGER
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the   system D10 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server eccdcs1s_D10_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server eccdcs1s_D10_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: SAPUSER -l: E -s: D10 -i: eccdcs1s_D10_01 -w: 0 -d: 20090924 -t: 202054 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Edited by: Harpal Singh on Sep 24, 2009 4:55 PM

Hi,
> Goto SE80, Select "Internet Service". Give service name as WEBGUI and enter. Right click on the WEBGUI and select Publish - > Complete service.
Source : http://wiki.sdn.sap.com/wiki/display/BI/BiAdminCockpit+Issues
Or call transaction SIAC_PUBLISH_ALL_INTERNAL to publish all services.
[Note 964521 - Short dump ITS_CANT_LOAD_INCLUDE w/ call of SAP GUI for HTML|https://service.sap.com/sap/support/notes/964521].
Regards,
Pierre

Problem while configuring email system in service desk message

Hi all,
I have configured my soution manager service desk for sending emails to the key user when the message status changes from New to In process.Now i want that a mail should go to the message processor when the message is assigned to him.For that i will have to define a new action but the issue is which smart form do i need to assign to that action.
Regards
Praveen

Hi Praveen
I am also doing Service Desk config. Can u please tell me how u configured External system. I was able to send messages internally. but from Other systems in landscape i am not able to. I f u have any document from end to end please send me.
Points will be awarded for the solution.
Rajesh

Problem while creating a system copy

Hi guys,
I've created a copy of my original BW system with the database copy of SQL server procedure:
1. Copy DB from "old" system and perform "post" activities (SID change, BD54 and after - BDLS -"old" logical sys. Name to "new" one..).
2. Verify RFC to ECC source system and create new RFC in ECC source system to "new" BW system.
3. Make BW logical system known to ECC source system (BD54).
4. RFC names are the same as Logical system names (both BW and ECC sides).
When I try to restore the source system connection (The original one) on the "new" BW system I get the following message:
The Connection BA is used in the PRD300YPCC. Source System as a Connection BWPCLNT550 to BW.
Do You Want to Delete this Connection in the Source System? The Connection is Restored After It Has Been Deleted Successfully.
If I answer delete - than the source system is working on the new copied BW system. But the original source system on the original BW system will have the same problem I'm having with the copied systems. This means that only one system could be connected to the ECC production on the same time.
Is there a way to make it work - i.e have both BW systems connected to the same ECC system. We want to have it done so we could upgrade one system and check it against the productive system.
Thanks alot,
Tomer Steinberg.

Still not solved.

Problem while installing java system application server 8.2

Hi
i am trying to install Java System Access Manager 8.2 on LINUX and during this process i am getting the below error.
Valid DNS Domain Name is required.
The DNS Domain name provided could not be validated.
The server being installed require a valid internet name.
Installation cannot proceed until a valid DNS Domain Name is provided.
The above arror is at COMMON SERVER SETTINGS window.
help me out.
varun

Hi,
This is a problem with your DNS settings (or lack of), not with Sun Java System Application Server/Access Manager.
You will need to setup DNS before installing.
One of these articles may help you:
http://www.aboutdebian.com/dns.htm
http://www.troubleshooters.com/linux/dns.htm
http://www.linux.org/docs/ldp/howto/DNS-HOWTO.html
Hope this helps....

Problem while creating business system...?

Hi All
My Scenario is RFC - To - File. For this i am trying to creating a business system with web as ABAP. I have specified all the parameters but when i click on next i am getting "The selected client has an associated logical system name that is already used for another business system. Select a different client" message.
Now how to create an another business system as web as abap with same server , client , installation number and all.... Could you please tell me...
I dont want to use the existing business system
Thanks & Regards
Ravi Shankar B

Sun,
yes, u have 2 option as Ramesh said...
There is no problem in reusing the business system.
The selected client has an associated logical system name that is already used for another business system. Select a different client" message. if u want to create another business system...give dirretent Logical System name
and different client
see here how to create Business system...step by step!!
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
regards
biplab
**reward if it helps you!!

Problem with importing Business System

Hello All,
I scussfully exported and imported components and products and scussfully exported business system from pi7.0 server. I want to import this business system on another PI7.0 Server. I am facing problem while importing business system is Business group is not assigned to business system. How to create Business group. Plz suggest me how to import business system.
Thanks
San

SAP help defines it - http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Also for more info,
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf - look into page 10 for a reference.

Severe problem while starting Lenovo 3000 N200

Dear friends & experts,
I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a black and white window is being displayed which contains the following message:
We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight to your choice.
Seconds until Windows starts:30.....1
After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts. I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
Setup did not find any hard disk drives installed in your computer.
Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
Setup cannot continue. To quit Setup, press F3.
A point to be noted is that earlier, I removed the Rescue & Recovery from my system thinking that it might not be of much use and now, I lament for it.
When I press F3 the same window appeared and the same problem recurred.
I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
I request you to help me in solving this problem so that I can continue my studies peacefully.
Thanking you,
With regards,
T.I. Kiran

First off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
Good luck.

Error while creating SOURCE SYSTEM

Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
Vineeth

Hi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka

Problem while adding SAP Netweaver 7.3 As Java in Solution Manager 7.1

Hi All,
We are facing strange problem while configuring managed system- SAP Netweaver 7.3 As Java in Solution manager 7.1 SP3. We added this system in SLD of solution manager and synchronized it with LMDB. As a result this As Java system is present under Technical systems in SMSY. Now we are assigning Product system to it with Landscape verification tool. But the problem is when we try to save after assigning Product version as SAP Netweaver and Product as SAP Netweaver 7.3. It always gives below error:
Fatal error trying to update Technical System (UPDATE_TSYSTEMS). Update could not be executed.
Product instance 54 not found
Product instance number error keep on changing depend upon what usage i select like ADS 7.3, Application Server Java 7.3 etc.
Please suggest if someone has faced this issue.
Thanks
Sunny

Hi Sunny,
You can refer to my first blog on this topic:
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Try to select only one product instance in LMDB and saved. After that, you can add more product instance in SMSY.
Hope it helps.
Cheers,
Nicholas Chang

Facing problem while doing MIRO

Hi gurus,
I facing problem while doing MIRO, system showing the message "Customization for "company code" J_1iindcus missing in the table"
pls help

Hi,
Please do customization for India Localisation-Phase-II.
In transaction J1IT, maintain company code settings.
J1IT->Global Settings->Company Settings
Reward if useful.

Problem while defining Busiiness System

Similar Messages

Maybe you are looking for