Problem: Wiring Praetorian Case to Neo4 Platnium MOBO

I'm new to this computer building thing, so bear with me.
I recently received my components for my new computer. Everything seems to be going well, except that I am having difficulty understanding the case wiring and how it interfaces/plugs-in to the MOBO. MSI has a pretty good detail in their documentation of what is required, but the case I bought has next to none.
This particular Praetorian Case has the following:
Power button: Blue/White wires
Power LED: Green/White wires
HDD LED: Orange/White wires
Reset button: Grey/Grey wires
This maybe so basic it will totally expose me as a newbie, but how do I know which of these wires are which, with respect to the MOBO's wiring diagram?
The MOBO has the following:
JFP1
1 Hard Disk LED pull-up (would it be orange or white?)
2 MSG LED pull-up (would it be green or white?)
3 Hard Disk active LED (would it be orange or white?)
4 MSG LED pull-up (would it be green or white?)
5 Reset Switch low reference pull-down to GND (Which Grey wire?)
6 Power Switch high reference pull-up (would it be blue or white?)
7 Reset Switch high reference pull-up (Which Grey wire?)
8 Power Switch low reference pull-down to Gnd (blue or white?)
9 Reserved do not use
This is how I would have guessed to wire it
1 Orange
2 Green
3 White
4 White
5 Grey ????
6 Blue
7 Grey ????
8 White
9 Not in use
In advance, thanks for your insight.
Also: what do I risk by doing this incorrectly?

Yeah, I've been to the Cooler Master website already. Let me tell you, there is way less information behind their links than you might expect. For example, the forum link is not what I would call a very interactive lead. It is more like a FAQ, which only covers 3 questions.
The setup directions for either Praetorian case (only one of the two cases has a downloadable manual) doesn't cover the wiring of the power/reset switches, and the LED indicator lights. What it does cover are the front USB, Firewire, and Audio. No problem with those, just the power related stuff. I just don't want to F-things up just because I didn't ask. I have also emailed Cooler Master about this but haven't heard anything back from them. Thanks for the help.

Similar Messages

Neo4 Platnium MOBO JCD1 Connector Type

Could somebody please confirm, for this newbie, that the JCD1 connector on the Neo4 Platinum MOBO fits an MPC4 connector type? I recently bought a DVD/CD burner OEM and need to buy the Audio cable for it. I am not well versed with the different cable types.
I have a BenQ 1620 Pro DVD.
Thanks.

Hi there !
You don't need to connect this analog cd/dvd output to mobo one anymore .
Todays motherboards , cdroms and dvdroms can all use digital audio extraction , the digital signals is ran over the ide databus
and picked up at the motherboard level where the sound is processed by onboard soundchip or a pci sound card .

Problems with the Neo4 Platnium/SLI Mobo

Hey all,
Well I just got my mobo up and running today and I have a few questions.
1st. Why is my PCI-E only at x8 ? I have a 6600GT and I know it supports x16?!
2nd. Why every time I boot into windows, it tells me it found new ide controllers but when it tries to install it gives me errors. I try to install drivers from cd but I get the same error, I download drivers from their website but same problem. It only started happening after I installed the latest bios v3.7. I use the ide stuff for my cd rom
3rd. I read that is bad for memeory to run in 2T. When my system boots up it says something along the lines of Dual Channel 400 2T. I read that it should run in 1T but I have no idea where to change it. I have OCZ Premier Series ram (2x512)
That is all for now. Any help would be great.
My System Specs
AMD 3700 cpu
MSI Neo4 Platnium/SLI mobo
Antec True Power EPS12V 550 PSU
OCZ Premier Series Ram
2 120 Gb sata harddrives
PCI-E BFG 6600 GT OC video card

http://www.viperlair.com/images/reviews/cpu_mobo/msi/amd/s939/k8nsli/31.jpg
4 from bottom set it to 1t
http://www.viperlair.com/images/reviews/cpu_mobo/msi/amd/s939/k8nsli/08.jpg
you have the card set for sli
nVidia Drivers
get drivers there

Northbridge Fan Problem w/Neo4 Plat Mobo

My Northbridge fan is going on my new Neo4 Platinum mobo. I can't even begin to express how pissed off I am right now. Anyway MSI is sending me out a new fan, but since I have to take the mobo out of the case anyway, I want to buy a new heatsink and fan. Does anyone have a suggestion on a good HSF that's cheap and where I can buy it? That is cheap in price, not in quality.
I also have another question that's unrelated. I was working on someone else's computer the other day installing a new HSF for him...a Thermalright XP-90C. Anyway when I went to remove the old stock HSF, not only did the HSF come out but so did the CPU WITHOUT lifting up the retention mechamism lever. Now before anyone says how stupid that was of me, I don't know how it could be done otherwise. The lever was completely covered by the HSF. I couldn't twist the HS either because it was inside the retention mechanism which only allows vertical movement. Does anyone know how to remove a CPU like this?? The CPU ended up working miraculously despite the fact that it was ripped from the socket. I think that's poor design implementation on mobo designers. If the retention mechanism lever was located outside the retention mechanism, then it wouldn't a problem and you could properly lift up the lever as your removing the heatsink. One of the reasons I bring this up is when I install a new NB fan, I might have to remove my HSF. I don't want it accidently falling off while I turn my mobo over to release the old NB fan clips.
Thanx in advance!

Quote from: Arioch on 23-July-05, 07:44:59
I just twist the HSF back and forth. Even with the minute leaway that exist within the retention mechanism, you loosen the grip of the paste by doing that. Another trick is to get the paste more fluient first by heating up the HSF with a hairdryer. And in the end, do not put more paste than the amount of 1.5 coocked grain of rice. That is enough, if you spread it in the center of the CPU.
Thanx, I'll remember that the next time I have to remove another HS as well as my own. Now does anyone have any suggestions on a better Northbridge fan??

Problems with use cases in JDeveloper 11.1.1.1.0

Use cases made with JDeveloper 11.1.1.0.2 can not be used and edited in JDeveloper 11.1.1.1.0.
Same problems with Use Case Diagrams.
And it seems to be impossible to create new use cases in JDeveloper 11.1.1.1.0.
What are the differences between 11.1.1.0.2 and 11.1.1.1.0 if you look at use cases??

In JDeveloper 11.1.1.0.2 each use case has one file with the folllowing name: *.xhtml_usc.
In JDeveloper 11.1.1.1.0 each use case has two files with a names like *.xhtml_usc and *.uml_usc (after standard migration with JDeveloper). I can still edit the *.xhtml_usc files, but I have no idea what to do with the *.uml_usc files. I can only open a Property-editor, but the properties I see have no relation with the text I used in my original use cases . New use cases only have a *.uml_usc file and a Property-editor. In javadoc the new use case does not appear.
My question is: why do I have two different use case files in JDeveloper 11.1.1.0 and how can I use the Property editor??

"Scrambled" graphics at boot - MSI 6600GT, Neo4-f mobo

I've tried the search option and I don't seem to be able to find this exact problem, but here it goes:
I recently built a new system with a K8N Neo4-F motherboard, 1gig Kingston Ram, Athlon64 3500+, and a 128 MB GeForce 6600GT (also MSI). I'm not sure if I have a graphics issue, a monitor issue, or a motherboard issue, but in either case, every now and then, when I boot my machine I get "scrambled" graphics when the POST screen appears. The system continues to load Windows XP (screen still looks messed up), and just before it's done loading windows, the screen just shuts off.
When the machine boots without these symptoms (the majority of the time) I have no problems. Windows loads just fine, games load and run just fine with no glitches and I can play for hours without a single problem.
I update my BIOS from 1.A0 to 1.B0 last night but have not had a chance to really "monitor" the problem since. LiveUpdate said my graphics card BIOS is up to date.
Any thoughts?
A couple other details:
I'm using a 17 inch CRT monitor, and my PSU is a 360 Watt Thermaltake unit.
Ow and PS: Before anybody suggests, I do not have any replacement parts, nor do I know anybody that has a new enough PC that I can try the card in another machine

You're welcome, ChrisB.
If, as it seems, we have the same problem, I sincerely doubt that your MoBo is concerned. I had the opportunity to test the card on a friend's PC, moreover the techno-guy of the store checked it out again. That is to say 3 different MoBos... and always the same issue. When things like this happen you can be pretty sure that the card is the faulty item. So don't worry . Actually, when I managed to boot the PC, the card worked perfectly, therefore I first decided to just ignore the problem. But these kind of events have the terrible power of a to annoy you to death, and every boot was to my eyes a painful experience ("Will it happen again?"). That's why I decided to RMA the card.
Good luck and see you
Quote from: ChrisB on 13-March-06, 19:07:58
Thanks for the prompt reply.
My problem does indeed sound exactly like what you experienced. I think I've just about exhausted every option by now. I've been a bit hestitant to RMA the card because it's a periodic problem so my concern was that I would just get the card back with "no problems found".
I seriously hope it's the graphics card and not the MB, cause I can't stand the thought of having to reinstall the motherboard :D

Problem with a case structure

I have the following problem:
I want that the structure from the TRUE case of the bigger case structure to start only when I switch from the button and activate the TRUE position. I observed with the probe tool that the structure is still executed in backgroun even if the bigger case is on FALSE. I want to make it start from the first position (the default case) of the inner case structure whenever I will switch from the button. I hope I made myself cleared. Thanks
Solved!
Go to Solution.
Attachments:
Untitled 3.vi ‏77 KB

Hi maryus,
your observation (or better assumption) is wrong.
As long as you set your button to FALSE the inner case structure in the TRUE case is not executed!
But: when you switch to TRUE case you wired the loop iterator to the inner case selector. So the inner case structure is not starting with it's first case but with the case corresponding to loop iteration count!
You can see all this by using execution highlighting!
Btw. when you have several cases in a case structure you can combine them to one case. It's all explained in the context help of the case structure! So you can combine cases (1, 3,4,6) and (2,5,7) into just one case each…
Edit: Damn, Christian was faster (with same conclusions)…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Medialink (PS3) - Wifi=Problem, Wired=OK

Oh fountain of knowledge....
I have been experiencing a problem with Nullriver's medialink, if my mac (Macbook) is connected to the router via wifi then the PS3 always states 'No media servers found', but if I plug my macbook directly into the router via ethernet then the PS3 finds the Medialink media server. The problem is, my Mac is normally located on the other side of the house, so plugging a cable in is not a possibility.
I have UPnP enabled, I have even set up an access control list (allowing access to my mac, and ps3) on my router as previously suggested on another post, I have opened up the port 51413 that I read on another post. Leopards firewall is disabled.
My router is a netgear one, badged as a SKY router, the newest one (black case).
I really can't figure this one out.
Please please help if you can.

I'm curious as to how your wireless internet performance has been with your mac. I have media link installed with the ps3 wired, and my imac wireless. It works great without any problems. My wireless internet speeds are terrible however. There are definitely some issues with 10.5.2 wireless implementation, and I would bet this is probably a related issue.

SQL query problem - select max (case... aggregate function)

Hi,
I have a problem with below sql query, it gives me problem/error message 'ORA-00937: not a single-group group function', why?
select sag.afdeling, sag.sagsnr, to_char(sag.start_dato, 'yyyy-mm-dd'), sag.stat, BOGF_TRANS.TRANSTYPE,
max (case when BOGF_TRANS.TRANSTYPE = 'K' then sum(bogf_trans.belobdkk) end) + -- as "TRANSTYPE K",
max (case when BOGF_TRANS.TRANSTYPE = 'D' then sum(bogf_trans.belobdkk) end) as "TRANSTYPE K & D",
max (case when BOGF_TRANS.TRANSTYPE = 'S' then sum(bogf_trans.belobdkk) end) as "SUM TRANSTYPE S"
from sag
join bogf_trans on sag.selskab = bogf_trans.selskab and sag.sagsnr = bogf_trans.sagsnr and sag.afdeling = bogf_trans.afdeling
where SAG.SELSKAB=37 and SAG.AFDELING = 'SUS' AND SAG.SAGSNR = 10876
group by sag.afdeling, sag.sagsnr, sag.start_dato, sag.stat, BOGF_TRANS.TRANSTYPE
If I exclude (columns) as below it give me correct summations (max (case... sum(...)) but then I miss some important info that I need
select
max (case when BOGF_TRANS.TRANSTYPE = 'K' then sum(bogf_trans.belobdkk) end) + -- as "TRANSTYPE K",
max (case when BOGF_TRANS.TRANSTYPE = 'D' then sum(bogf_trans.belobdkk) end) as "TRANSTYPE K & D",
max (case when BOGF_TRANS.TRANSTYPE = 'S' then sum(bogf_trans.belobdkk) end) as "SUM TRANSTYPE S"
from sag
join bogf_trans on sag.selskab = bogf_trans.selskab and sag.sagsnr = bogf_trans.sagsnr and sag.afdeling = bogf_trans.afdeling
where SAG.SELSKAB=37 and SAG.AFDELING = 'SUS' AND SAG.SAGSNR = 10876
group by sag.afdeling, sag.sagsnr, sag.start_dato, sag.stat, BOGF_TRANS.TRANSTYPE
Any ideas?

Moved to more sutable forum, sorry.

Problem in APDU-case 1:No command,no response

Hello evrybody.I have done a method in my java card applet which does not return any command data neither response data.
I wrote in my APDU script the following(as defined the case 1 in the Zhiqun Chen's book-page 102,says that "P3(the 5th field in the APDU buffer) has to be 0"):
//CLA INS P1 P2 P3
0xB1 0x50 0x00 0x00 0x00;
Howevr, the executed APDU script returns me the following:
com.sun.javacard.apdutool.ReaderWriterError: Encountered ";" at line 105, column
25.
Was expecting one of: <INTEGER_LITERAL> ...
<CHARACTER_LITERAL> ...
<STRING_LITERAL> ...
I have tried to add another 0x00 byte at the end of the above script line, as follwoing:
//CLA INS P1 P2 Lc Le
0xB1 0x50 0x00 0x00 0x00 0x00;
//WIth the idea that Lc=0(no command data) and Le=0(no response data)
I noticed that the method is working properly(does the work that has to do;I tested and I am definetely sure) but on the other hand the executed APDU script returns as SW1 SW2 the following:
CLA: b1, INS: 50, P1: 00, P2: 00, Lc: 00, Le: 00, SW1: 6f, SW2: 00 (!!!!)
Actually,I was waiting for SW1 SW2 == 90 00.
I do not know why this is returned.
Do you know what it is going wrong?
I will appreciate any help and guidance.
Thank you for you time.

I will give the code of my function.I think the problem is in the code of this method(function).I will give you in order to have a look at it:
private void delete_all_records(APDU apdu)
     ver_pin();
     byte[] buffer=apdu.getBuffer();
     byte get_P1=buffer[ISO7816.OFFSET_P1];
     byte P3=buffer[ISO7816.OFFSET_LC];
     //Check the appropriate syntax
     if (get_P1!=(byte)0) // || (P3!=(byte)0) )
     ISOException.throwIt (SW_SYNTAX_DEL_ERROR);
// else
     //Delete all the record.This for loop
     //deletes all the records' ids.
     for (short i=0;i<kostas.length;i++)
     kostas[(short)i].record_id=(byte)0;
I did not use any of the functions such as sendBytes() or apdu.setIncomingAndReceive because I did not want to take data either to return response data.Do you have any idea what's going on?
I will really apprecitae any help.Thank you for your time.

Prime Infrastructure 2.2- problems: Wired Detailed Device Inventory report not running / Cisco 5500 WLCs no listed in subgroup

New installation of Prime Infrastructure 2.2.0 (PI-VA-2.2.0.0.158.ova)
installed fixes/software/device packs:
PI 2.2.1 Poodle Fix (installed)
PI 2.2.1 Maintenance Release (installed,ncs stopped,rebooted)
Prime Infrastrucutre 2.2 Device Pack 3 (installed,ncs stopped,rebooted)
Licences installed (ncs stopped,rebooted)
Added all devices via Bulk Import (Inventory>Device Management>Network Devices)
Problem 1:
The Cisco 5500 WLCs are not listed in Inventory>Device Management>Network Devices (see screen shot) but listed under "All Devices"!
The Cisco 4400 WLCs and the 8500 WLCs are listed within their subgroup.
Devices are in "Managed State"
Problem 2: fixed! (Browser issue)
Problem 3:
Unable to run "Wired Detailed Device Inventory" report because I get the error message: Failed to run report: Unable to retrieve data for: Chassis Information (if Chassis Information is selected, if System Information is selected I get the error message with ...retrieve data for:System Information)
All devices do have an "Admin Status = Managed" and the Last Inventory Collections Status = Completed.
Has anyone the same issues or a tip for me?
Another topic, the "User Defined Fileds" are not exported when with running a "Device Export" (Inventory > Device Management > Network Devices). ;-(
BR
Bastian

Hallo Bastian,
I think you still have browser issue, Using IE is still the best with Prime.
I have exactly same prime 2.2 and installed fixes/software/device packs.
I have no problem I can see all views. I use now IE 11, with Chrome 42.0.2311.90 and firefox 37.01 I have problems too with lots of views. You have not tell what browser + version you have.
Since you have same prime 2.2 as me. I have other problems, can you check yours?
Can you see a functional CLI template page at Configuration > Templates > Features & Technologies:
https://supportforums.cisco.com/discussion/12481691/can-cisco-prime-22-still-do-simple-ad-hoc-deployment-job-cli-over-all-switches
Do you have SNMP Connectivity Failed while Verify Credentials has no errors all green and checked.
https://supportforums.cisco.com/discussion/12494786/snmp-request-exceeds-internal-data-buffer-512-bytes-prime-22-asa-5545

Problems with Upper Case Letters on Keyboard

Suddenly my keyboard will not print a capital i. in fact, if i use the caps key, it won't even put the letter i in either upper or lower case. When i put the caps lock on, can get a capitol 'I', but once the cap lock is off it is back to the lower case i again.
is there anything i can do to correct this, without taking my computer keyboard in for service? i broke my neck about 3 weeks ago and i am house bound for the next 5 weeks.
Sheila K.

Hey Sam,
im having the very same problem even though iv only had my ibook g4 for just under 5 months. i believe that puts me still under the 1 year warrenty for the computer itself. will they still replace the keyboard if this is the case. if they decide not to do so. i was wondering if anyone here new the part number for the keyboard that is easly installed on the g4 ibooks. if anyone here knows anything on the matter please feel free to email me on this.
as most people can see, i also have a power mac g5 desktop, otherwise called a cheese grader. if you know what i mean. theres very little i dont like apples computers. thats probally why everything in my house is mac related. having 3 ipods, 1 g4 ibook, a power mac g5, isight cam, and lots more. the point here is in the event people are trying to decide what kind of coomputer there wanting to buy. several things need to be considered before you should go out and buy one. obviously price has alot to do with your choice, but in that decision you must also consider whether or not the computer has teachnical type issues. is the company well known for having lots of problems. will you be able to get the technical support you need in the event there is some major problem with the computer that you may be inquiring on. having the apple care protection plan on all of apple's top computers is the single one thing that people dont think about when buying a new brand name computer. i cant tell people enough that buying this apple care plan is vital to the survival of you and your new computer. an extra $200-$400 is well worth the expense down the line.

Hello all i am facing problem in manufacturing case

hii experts
well i am implementing SAP in manufacturing company .i am stuck in one case when one item which is originally produce by
one of the manufacture company and that company sale that item to dealer with cenvat value (because item is excisable ),and my company purchase that item from dealer .and the cost of item include Cenvat in there basic price and dealer charge that item with VAT only .so my company claim Cenvat with original value which was set by first manufacture company .so what shoud i do now ? how would i make PO which include right cenvat and vat also ?
please help me
thanx in advance

Hi Sahil.....
I think you are going in a different direction from what experts are trying to suggest you.
Have you tried below?
1. if (AssessableValue > 0)
{ BED_BaseAmt = AssessableValue*Qty }
else
{ BED_BaseAmt = Total }
BED_TaxAmt=BED_BaseAmt*BED_Rate
For eCess
2. Cess_BaseAmt=BED_TaxAmt
Cess_TaxAmt=Cess_BaseAmt*Cess_Rate
For HCess
3. HSCess_BaseAmt=BED_TaxAmt
HSCess_TaxAmt=HSCess_BaseAmt*HSCess_Rate
for VAT on CenVAT
4. VAT_BaseAmt=Total
VAT_TaxAmt=VAT_BaseAmt*VAT_Rate
In Your transaction there must be two Unit Prices.
one from dealer on which VAT is applicable and other (Assassable value) from direct manufacturer on which Excise Duty is applicable if I'm not wrong.
In that case you have to put Unit from Dealer in Unit Proce Column and price on which Excise is being calculated should be put in Assassable Value INR column (Activate from form setting if disabled).
Now when you create and apply above combination of tax.
Hope it will solve your problem....
Regards,
Rahul

Init-problem in swich-case

I have to init the "a1" and "k" inside the if-advise, but I want use it outside the if-advise, too and there he can't resolve symbol....
case 1:
if(a1 == null){
//there is my problem!!!!!!!!
a1 = new String[100];
int k=0;
a1[k] = testResponse.substring(0,10);
System.out.println(a1[k]);
k++;
break;

perhaps it would be easier if there is a way to append String to an array like StringBuffer.append(String) or in "php" array[] .= string (there it gets the last index of the array, iterates it and then automatically appends the string..)
maybe if have to think about a completely different way to solve my problem...
String[] a0,a1;
switch(x){
case 0:
if(a0 == null){
a0 = new String[100];
int k1=0;
a0[k1] = testResponse.substring(0,10);
k1++;
break;
case 1:
if(a1 == null){
a1 = new String[100];
int k2=0;
a1[k2] = testResponse[i].substring(0,10);
k2++;
break;

[solved]Anybody ever had a problem with a case making it difficult to charge?

I purchased a gently used ipod 4g from eBay. I was pretty thrilled with it. It was still new enough to have some limited warranty time left. Dec 23. I experimented with different apps for a couple of days. I had to recharged it once. No problem. I purchased a gel case with a screen protector, so it didn't get it scratched, or beat up. I set it up and it was looking pretty nice. It was a clear gel case so it didn't alter the look at all. I installed some more apps and read some ipod tutorials. I installed mo gv app and found I had an iphone 4 with a free cell phone contract. I needed a second charge. I plugged it into my wall outlet adapter.. After 4 hours nothing. I changed the wall outlet. After 4 hours nothing. I thought I was having a cord problem because my ipod would neither charge nor mount as a flash drive on my computer usb port. I googled ipod trouble shooting and was advised to do the things that I had done & 1)reset it, and if that didn't work 2)buy a new cord. If that didn't work, use the apple limited warranty and get them to fix or replace. I did 1) and 2). Nothing. I was very desperate and getting ready to send it back to apple. Then it struck me that the only thing that had changed physically to the ipod since I last charged was putting on the case. I wondered if the case was interfering in some way. I took it off and put on the cord and plugged into the old wall adapter outlet. This worked, now my ipod is charged. I also found that I could charge with the case on if I pulled the front of it up a little before putting on the cord. Problem fixed.
I guess I am writing this hoping it might save someone else the aggravation of sending an ipod to get if fixed only to be told there is nothing friggen wrong with it. Maybe this should be added to the online troubleshooters?.

Richard,
Install the latest fix pack i.e. FP 3 for Xcelsius
Description:
URL Button component does not open a new browser window when the Trigger Behavior functions are enabled.
New Behavior:
This issue has been resolved.
Hope this helps...
-Anil

Problem: Wiring Praetorian Case to Neo4 Platnium MOBO

Similar Messages

Maybe you are looking for