Problems with the Neo4 Platnium/SLI Mobo
Hey all,
Well I just got my mobo up and running today and I have a few questions.
1st. Why is my PCI-E only at x8 ? I have a 6600GT and I know it supports x16?!
2nd. Why every time I boot into windows, it tells me it found new ide controllers but when it tries to install it gives me errors. I try to install drivers from cd but I get the same error, I download drivers from their website but same problem. It only started happening after I installed the latest bios v3.7. I use the ide stuff for my cd rom
3rd. I read that is bad for memeory to run in 2T. When my system boots up it says something along the lines of Dual Channel 400 2T. I read that it should run in 1T but I have no idea where to change it. I have OCZ Premier Series ram (2x512)
That is all for now. Any help would be great.
My System Specs
AMD 3700 cpu
MSI Neo4 Platnium/SLI mobo
Antec True Power EPS12V 550 PSU
OCZ Premier Series Ram
2 120 Gb sata harddrives
PCI-E BFG 6600 GT OC video card
http://www.viperlair.com/images/reviews/cpu_mobo/msi/amd/s939/k8nsli/31.jpg
4 from bottom set it to 1t
http://www.viperlair.com/images/reviews/cpu_mobo/msi/amd/s939/k8nsli/08.jpg
you have the card set for sli
nVidia Drivers
get drivers there
Similar Messages
-
Mic Playback with MSI NEO4 PLATNIUM SLI!!!!!!!!!!!!!!!!!!!!!!!!
Well i know this is a sound card problem. This has happened to me before, last time i re-installed windows, which i just did. I load up vent and when i choose a mixer my mic suddenly is constantly on and i can hear the room noises via the mic. Not only does my mic not work in vent, but i have constant noise. Muteing the mic works....but that isnt an option because i want to use vent. I have tried re-installing the driver.......
Anyone know how to fix this problem?It's Creative's fault, but ive read others having this problem with the motherboard so i hope someone could help me out. Thanks!Yes i have the latest onboard one installed. Not sure about the my Nforce4 sli chipset though, how do i check my current version? Has there been an update? It might be cuz i dont have SP2 installed (windows)? Im downloading it now and then ill re-install the drivers.
-
K8N Neo 4 Platnium SLI mobo issues **DEAD**
My first K8N Neo 4 Platnium SLI mobo got RMA'ed due to the fan on the nvidia chip stopping. This replaced board is now getting RMA'ed as it just fried on me. No idea what is gone on it, but I had a local shop diagnose that it was the mobo.
So is anyone else having issues with the K8N Neo 4 Platnium SLI mobo? I've asked MSI RMA dept to replace it with a Diamond Plus mobo as the K8N Neo 4 Platnium SLI mobo is oviously crap.
Do they still make the K8N Neo 4 Platnium SLI mobo or is it now discontinued?
MIkeQuote from: mrking.id on 02-May-06, 07:46:14
OK, I'm starting to understand this dual rail thingy.
Bass, did you mean THIS or THIS Powerstream?
Also, since I have your attention, what about this Enermax
I ask as it is cheaper.
Those OCZs are the same, just a different color.....
Look at the spec's for the 520W, 33A @ 12V.
As for that Enermax, it's one of those Dual-rails ones....I would not go there.
The Enermax EG651-VE is way better, but beware, it doesn't have the SLI videocard connectors, so you may need special inbetween-cables.
If you planning to build an SLI system, better go for the OCZ Powerstream 520W, the blue one, as that one has the SLI connectors.
Other then that, they are both the same -
Having Problems With The Neo2 ? Read This!!!!
Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :DOk.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world -
Fixing the problem with the Device Not Recongized by WMP and Mediasource problem with MTP devi
PLEASE READ THE WHOLE THING!!! I KNOW IT SOUNDS LIKE MANY OTHER FAILED SOLUTIONS BUT YOU HAVE TO READ THROUGH MY WHOLE POST TO MAKE IT WORK!!!TRUST ME!!!
ok, now I read this a billion times, and felt that I was the only idiot that had a "bad" computer that didn't allow me to use my Zen mtp device... but it turns out I was more idiotic than I thought. I hope this helps those who have the same problem I had...here goes...
When you go to the Creative Labs website, go to Support, then Knowledge Base, then go to the MP3 players picture in the PRODUCT CATEGORY and click on it. You need to follow the steps that are described on the SID0053 Product Article. Then click on the Editing the System Registry link towards the bottom and it will tell you what to do...BUT there is something that I never ever did right and I bet lots of other folks didn't do right either. Once you are in the USB Properties seccion of the registry, YOU ACTUALY HAVE TO ADD THE WORD "EVERYONE" INTO THE ALLOWED SECCION!!! Not just because it says "Administrators" and what not means that EVERYONE IS ALLOWED, allow the word "everyone"thne click OK. Now, I did this with my Zen Touch on and plugged into the USB port and without the word DOCKED on it, as it wouldn't dock for me before this. that's it... hope it works for you, if it does then almost instantly the word DOCKED should appear on your MP3 player's Display. Hope that everyone has the same luck as I did. if not, I'll pray for you, I know how frustrating this problem is because I delt with it for toooooo long.I had a similar problem with my Zen Touch, but the only symptom was not being able to install MediaSource or the Software Suite. I got the same messages that you did. I was able to use Windows Explorer to add/edit/remove files, but I wanted the Zen Media Explorer so that I could create playlists. After about 2 days of research and trial and error, I ended up fixing it by uninstalling/reinstalling the drivers.
If you don't know how to do that, here are instructions...
I'm using XP SP2, btw, so if you're using another version of Windows, it might be slightly different...
) With the Zen connected, Right-click on "My Computer"
2) Select "Properties"
3) Click on the "Hardware" tab and select "Device Manager"
4) Right Click on "MTP Device" (or MTP Media Player) and select "Uninstall"
5) Disconnect the player from the computer, wait about 5 secs, and reconnect.
When you reconnect it, the drivers will be reinstalled. Try running the setup again after that.
If that still doesn't work, look for random optional Windows updates, maybe?...esp. PlaysForSure, WMP, or USB/mobo/INF/Chipset driver updates...or maybe when it says "Setup could not detect and portable device on your system. Setup will now install the necessary drivers to enable your device to be detected," it actually <i>is</i> doing something, but it isn't apparent until you reinstall the driver. To be honest, I just don't know. The computer I'm using is only a few months old and I didn't have any problems installing on an older computer.
Oh well. I hope that fixes your problem.
As far as the problem with the 360 connectivity, I'm sorry I can't help you there.Message Edited by potestasx on -03-2006:28 PM
Message Edited by potestasx on -03-2006:45 PM -
Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?
The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.
Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?
-
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.
This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck
-
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailableAlso if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.
-
Problems with the O2 blackberry data package on my Curve 3G.
I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart -
Many problems with the 'Export to Text' (.txt) in CR Xi
Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
ThanksHi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree -
When going to update it says there is a billing problem with the previous purchase when I go to update it still won't let me download and all the info is correct. How do I fix this?
You have to email iTunes Store Support about this issue now. You can get started here. Change the country in the upper right if necessary.
https://ssl.apple.com/emea/support/itunes/contact.html
Maybe you are looking for
-
Zeroes after decimal getting trimmed after 1:1 mapping of EDIFACT
hi all i have created 1:1 mapping for XML->EDI. i took the output from XI and gave it as input.However, in the output of the mapping, the zeroes after decimal are getting deleted. for example if the input contain 2500.000, the output of the mapping c
-
I recently bought a Palm Tungsten E2. I have been unable to install the Universal Wireless Keyboard software that came with the E2. Went online and downloaded the version 1.13 UWK and that would not install either. What did I do wrong? Post relates t
-
Remove Entries with no value in the total "Resource Assignment"
Dear all, I am looking for a view where when i do not use any filters in the Resource view with Summery view selected, and when i choose the date range, i want only tasks with actual work done during that selected period to show. that is if the total
-
I currently have a Mac Desktop computer but I have just signed up for online classes that are not compatible with my Mac. Here are the PC Requirements they are requesting. can anyone please help me choose a laptop that is close or better than these
-
Hi, I created a IMAP mail account on my brand new E71 and if I wanna check for new mails the email client close. This is only with one email account. All other accounts works. What can I do to solve this (cause it´s the important account). If I open