Problem with a key figure restriction

Hi,
I have a problem with one key figure in report: in infocube, this key figure is aggrigated for all the profit centers (summation). In infocube, there is a value '150' for each profit centers (100 pieces) and in the report it is counting 150*100=15000. However, it shouldn't count the sum of all entries in the infocube but show only one value in the report which would be '150'.
I think this should be possible to do but I just don't know how. Hope somebody is able to help me. Thanks in advance.

Hi,
If the values are same for all profit center then change the Profit center infoobject property in the query design to show the maximum values for the 'calculation result as' parameter
Regards,
Vishwa,
Edited by: Vishwanath H.E on Sep 3, 2008 9:19 AM

Similar Messages

Query problem with accumulated key figures

Hi BI Gurus!
I have a report problem that I hope you can help me with!
In my report I have 2 key figures. One for accumulated revenue previous year (KF1) and one for accumulated revenue current year (KF2). Both key figures should be presented in a graph in monthly buckets.
January figures from both the key figures shoule be presented in the same bucket. Therfore I can't use 0CALYEAR since we have the "year" information in there. Instead I'm using 0CALMONTH2 which is only two digits, 01 for January. That way I can map figures from both previous year and current year in the same bucket.
I need the figures to be accumulated and this is what I have problem with. When I run the report today in February 2010 it looks like this:
Month   KF1   KF2
01        10     15
02        10     20
03        15
04        10
05        20
06        10
07        10
08        15
09        15
10        20
11        20
12        10
This is how I would like the report to look like:
Month   KF1   KF2
01        10     15
02        20     35
03        35
04        45
05        65
06        75
07        85
08        100
09        115
10        135
11        155
12        165
I have tried to use the setting "accumulated" for the key figures but then I get this result:
Month   KF1   KF2
01        10     15
02        20     35
03        35     35
04        45     35
05        65     35
06        75     35
07        85     35
08        100   35
09        115   35
10        135   35
11        155   35
12        165   35
Since the KF2 is revenue for current year and I run the report in February I don't want any figures to be displayed in Mars...
I have tried to restrict the key figures by 0CALMONTH2 and 0CALYEAR. The KF1 is havein a restriction to only show values for 0CALYEAR - 1 and an interval for 0CALMONTH2 from JAN - DEC.
The KF2 is having a restriction to only show values in the interval "first month in year - current month" (in this example JAN - FEB) for 0CALMONTH2. And current year for 0CALYEAR.
Despite my restrictions for KF2 the numpers repeats itself for every month...
Any suggestion how I can resolve this?
Best regards
Anders Florin

Hi Khaled and thank you for trying to help me!
I agree with you and think the users should accept the report as it is. But they are claiming that top management will not accept this and they would really want this to be fixed the whay that they want. I have tried to push back on this and said that I'm not sure that it can be resoleved and that it could cost them a lot of money if I try.
But I will try to resolve it for them if I have spare time in the end of the project. I have not promised them anything but it would really be nice if I could fix it.
So when you say I need to use a structure and a calculated key figure. How should the calculated key figure and the structure be configured?
If I use a structure in the rows I guess I can't use same object in calc.key.figure right? Like if I use 0CALMONTH2 in the structure I'm not able to restrict the key figure with the same object? If that is correct I also have a ZMONTH object, different story why I have that... , that I can use in the same way as 0CALMONTH2. Or is this only a problem when I use "local" formulas within the query and not using a "global" calculated key figure? Cause I have only used the "loacal" formula calculated key figure in this report....
Br
Anders

Problem with displaying key figures in report

Does anyone have experience with SAP Report Designer for Release 7.0. I want to display key figures in the following manner: 1'500 (Which means 1.500.000) For a billion the value displaye should be 1''000 (1.000.000.000).
1000 =     1.000
0'010 =     10.000
0'100 =     100.000
1'000 =     1.000.000
0''010 =     10.000.000
0''100 =     100.000.000
1''000 =     1.000.000.000
Thus the report always shows 4 digit figures. The problem is that I don't know how to include the apostophe as a separator for the million.
Additionaly to that I want to have the font changed to a smaller number, if the figure is to large for the column. Is there a possibity to change the display of the figure with the scaling? And is there a possibility to change the font? These two parameters have to be decided when running the report. (The scale of the numbers can differ within one column.)

there is two way to display the values , one is globally, where u do it the keyfigure and another way is on the query designer level
in keyfigure go to aggregation , there u will get the number display format , u can change there and another way is in the query designer right click on the key figure and select properties and select display format

Problem with virtual Key Figure in a query

Hi Experts,
I would like to share my problem with the virtual key figure in a query:
I have a query with a virtual key figure and when I eject the query by analyzer, the result sometimes is displayed and sometimes is not displayed (is equal to 0), with the same initials values. And when I eject the query by RSRT always display the result for the virtual key figure.
Why don't always display the result?
Thanks a lot

Hi,
I think that the problem is the level of support package. We have BI AddOn 7.X (based on 7.20) support package 0.
What do you think?
Regards

Display Problem with the Key Figures

Hi,
I working on the query where i need to display three Key Figures. I have no problem with the first two Key Figures , but the third Key figure values need to be display by day wise. (0Calday). i.e., the third key figure value should be displayed based no of days 0Calday has.
For Example if 0Calday is holding 4 days... then third keyfigure Value should be display as 4 columns with their respective values by dividing into day wise, remaining first two key figures should not be changed.
When i am trying to call the 0Calday into the Column, all the three Key Figures values are displaying as many as no of days 0calday has.
For Example if 0Calday has 2 day....the three Key Figures are values are breaking into two days values and displaying, so totally we can see 6 Key figure values. But i need first two values should not break but the last key figure should be divide into two days as values and display.
Thanks & Regards
Agama.

Hi Venkat
This can be achieved by supressing 0 values.
1) In the Query Designer: Go toquery properties
2) Select Suppress Zeros
3) Select option Active
4) Under Effect On : try with Column or row o (Not infront of system , so cannot exactly remember)
This will allow you to get the exact result as per your requirement. We had the same issue and we could resolve this by following this.
Hope it helps.
Cheers

Problem with multiprovider key figure

Hi all,
I have Infocubes according to reporting division and a multiprovider built on these Infocubes.
There is a key figure NET_SALES,the value of which differs in the Infocube and multiprovider.When i check the infocube data independently,the value of the key figure looks ok but when i try to display data in multiprovider with the same conditions,the value of the key figure is incorrect.
Can anyone please help me out with this?
Regards,
Suchitra

Then make sure that you are analyzing it correctly. Multiprovider will show only values which is coming from the cube.
Do one thing, uncheck the other three and check for only one cube. Now, you match the data. If its correct, do it for all the region. It may help you to diagnose where is the problem.
Thanks...
Shambhu

Problem with using Key Figure inside IDT

Hii Experts,
I have created an Universe using Information Design Tool(IDT), in which i had created the Key figures whose value are calculated based up on Date i supply and that value is Being Calculated fine according to my need.
But Problem is that when i am going to use that Key figures value in further Calculation, its returning wrong value....
Can anyone please help me, how can i use the Key figure's value in another key figure for further calculation inside the IDT.
Thanks
Prakash

Hi Prakash,
Can you explain what are you doing exactly and what you wan to do?
Can you provide the expression you wrote? Which database are you using?
Thank you
Didier

Problems with Calculated Key Figure in Bex

One of our super users have copied a query and trying to do some changes in the new query. In the Query designer, the person was directly dragging a Calculated Key Figure from the left hand side panel into columns and trying to change its properties (Currency conversion key is changed from 'Nothing Defined' to 'Monthly average rate' with variable entry.
Then we get the error 'Abort system error in program and form SET_TCUR-02-' without even getting the variable popup window.
Also when we check the Query properties, we observed that one variable entry (which is displayed in the target currency field in the properties) is displayed twice and came to know that this is the reason for the error.
But why is that displaying twice there? Is there anything wrong in the way we had created the CKF? Do you have any document on how to use CKFs and RKFs?

Check here:
http://help.sap.com/saphelp_nw04/helpdata/EN/13/e072abaddb574284d22361f0b824bf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/6f/56853c08c7aa11e10000000a11405a/content.htm
For Currency Translation "How to:, see here:
http://help.sap.com/saphelp_nw04/helpdata/EN/d2/02223c5f00612be10000000a11402f/content.htm
Thanks..
Shambhu

Problem with Calculated Key Figure and Acumulated

Dear Masters,
I am trying to use cumulated KF in a query. No problem with results. I just flag 'Cumulated'. However I need to use the value of each line in an operation. Let me illustrate it:
Cumulated KF    KF1      FINALKF
2                         2             2/2=1
3 (2+1)                1              1/1=1
5 (3+2)                 4             4/2=2
6 (5+1)                 2             2/5=0.4
As you can see above instead divide the KF1 by Cumulated value of a Line, the final result is always KF1/the value that would be the add value. The first line always is right because for the line 1 cumulated value has no accumulation value.
Any idea?
Regards,
GilsonTeixeira

Any idea?

Subject : Problem with Virtual key figures for one scenario.

Hi Gurus,
I have implemented Virtual Keyfigures for my Bex report and it is working perfectly bUt for one scenario.
If i give PLANT and MATERIALS in the selection , The report calaculates the Virtual
keyfigure value correctly But if i give Only PLANT
and NO Materials ( A single plant can have 700 materials also!!), The report executes and after sometime
gives me a messsage " Disconnecting from Server"
I executed the report in RSRT . It gives me this error "exception with the type CX_SY_ARITHMETIC_OVERFLOW occurred"
Since the Virtual keyfigure doesnot use Cache memory. Is it restricted by the Physical memory?. How to overcome this
problem?
Please let know if anyone faced this issue and resolved It. Any help or guidance is really appreciated.

Hi Oscar,
Thanks for reply,
How can i know the overflow and how can i use the catch for avoiding the short dump?
thanks in advance.

Problem with statistical key figure for Profit center

Hi all,
In Cost center accounting, I can enter value for SKF per daily with Tcode KB31N. But in Profit center accounting, why cant I enter value for SKF per daily or weekly? How to have data for SKF per daily? what can I do?
Thanks

Hi
SKFs are always entered per month and used per month... What do you wanna achieve by entering them daily?
If you want to execute daily allocation cycles, I believe thats a wastage of time and energy and you increase the no of line items in the table
br, Ajay M

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Having problem with dead key in Leopard

Hello. I'm having problem with dead key in Leopard.
In Tiger it was working, but in Leopard dead key "'" doesn't work.
In Tiger I could use OPTION key as well to get Latvian special characters (both worked - OPTION Key and dead-key), but in LEOPARD OPTION key is the only possibility to get these characters.
How can I get dead key "'" working?
I'm using Latvian language with Latvian keyboard layout.
Here are images how it looked in Tiger:
1) Before dead key is pressed:
http://amerix.no-ip.org/tmp/1.tiff
2) After dead key is pressed:
http://amerix.no-ip.org/tmp/2.tiff

ok, i got answer
so - first problem was that ukelele didn't work in leopard (it wasn't possible to start new layout), but it was possible to edit Tom Gewecke posted layout.
There it is possible to change every thing (dead-key as well).
So I edited it and now i have layout where dead-key works -
http://amerix.no-ip.org/tmp/LatvianT.keylayout
Just do what Tom Gewecke said with this layout. It should work!

Reports with only key figures? How to layout?

Hi anyone,
Could you kindly advise? I have a financial report which is about 20 key figures ex. Sales, Cash discounts, Revenue from operations, Gross Margin, Operating profit and Overheads % of sales...
For each of these areas I need to have 9 seperate numerical values:
Actual value (by month)
Last Year value (by month):
Budget value (by month)
Actual value ( year to date)
% of sales (ytd)
Last year value (ytd)
Budget value (ytd)
Full yr value (full yr)
Budget value (full yr)
This can lead to 20keyfiguresX9timeperiods = 180 numbers in the report. As I don't have any characteristics, it seems I'll end up with a very very long row.. Has anyone experience fixing this sort of issue?

Hi
Sorry for the earlier post for not explaining...
There are two ways you can do.
First way is meddling with the modelling....
Create 9 infoobject charecterisitcs with CHAR TYPE NUM and feed them with the key figures timeperiods thru update rule routine......Use this 9CHAR -> fed by kfs into Cube and you can use 2 structures...as far as the system is concerned you are using one structure of kf and one for chars.......
Second way...if ur using BEx you can think of Macros
Regards
N Ganesh

Problem with a key figure restriction

Similar Messages

Maybe you are looking for