Problem with Assemble Test VIs for Run-Time Distribution

I get an error that a file is already in memory and that I will have to remove it before I can build the application. The file in question is Get File System Seperator.vi. It lives in vi.lib\Utility\sysinfo.llb. If it is not a stock vi from national and was placed there by some other add on tools (perhaps an OpenG toolkit), how can I disable it? Labview itself will not boot without this sysinfo.llb.
I am using TestStand Engine 2.01 on the XP system and 2.01f1 on win2000 with the same results. I am not using numerical limits so the fix (patch) for multiple numerical limits does not seem to be needed.

Hi Paul,
In the description of your problem you state that "I will have to remove it before I can build the application". I was wondering if you could elaborate on the scenario you are describing because this is a little bit confusing to me as it is. The "Assemble Test VIs for Run-Time Distribution" tool in the Sequence Editor does not involve "building an application" as part of the process of using it. When you select the menu option for this tool, a TestStand sequence is invoked that has a few LV VI steps in it which perform the VI Assembly process, with no application building involved (just searching through sequences for top-level vis, their sub-vis, and copying them all into a directory you choose). I hope this describes what it is I'm not understanding about your statement, but to explain why it is that I feel this is important is in order to reproduce the problem I need to know exactly what it is you are doing at the time of encountering the problem. To go over a common set of issues people encounter when they use this tool, I would like to see if you have tried the following:
1) Have you checked to make sure that the LabVIEW Standard Prototype Adapter is configured to use the LabVIEW development environment as its Run-Time Server before running the tool. It will not work if the adapter is set to use TestStand LVRTS or TestStandGUILVRTS. The assembly tool requires features of the full LV IDE to perform the functions it carries out, and you will get an error if the adapter is configured improperly. To check this out, go to Configure >> Adapters..., select the LV Adapter in the listbox, then click the Configure button. In the second dialog, change the run-time server option to "LabVIEW".
2) Are you actually trying to build the Assemble Test VIs for Runtime Distribution tool into an application? (This is not an intended use of the tool's VIs).
3) Before running the assembly tool, have you tried using the Sequence Editor's File >> Unload All Modules option?
Let me know if you have tried the above things or if you are doing any of the "unintended" things with the tool so I can get a better grasp of when it is you are seeing the problem. Again, the goal would be for us to reproduce it.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

Similar Messages

Error 7 during assemble test Vis for runtime distribution

I get this error when assembling VIs for Runtime Dist. Probably can't find a file but which Vi is the problem? I tried to open diagram for TestStand - Call Package VIs for Distribution.vi to find the problem vi but it is password protected.
Attachments:
ts_error7.bmp ‏1678 KB

The code was written in LV 6i and I mass compiled it using LV 7. I was able to assemble for distribution in TS 2.0 but I received an runtime error (VI not executable). I figured that since this code was saved as an llb with vi.lib included I had to remove the vi.lib VIs and reload th source in LV 7.0. I deleted a needed control when I did this and that was what was missing. I included the missing control and was able to assemble my VIs for runtime distribution. One question remains... During a mass compile shouldn't the vi.lib VIs be replaced by the newer versions?

Problem with ejecution work book (determining run time)

Hello, I have a problem with the Discoverer Desktop (v. 10.1.2.1) db. Oracle 10G.
Whenever I execute a work book with my user in any equipment of the network
when determining the run time of the report is delayed , only with my user and
the privileges of the reports and tables is ok.
excuse my english...
thanks

It sounds like the problem with the query estimator. Basically, the query estimator IMO should be turned off for Discoverer as it's not Disco's best feature. As to why only you see it, are you sure it's not only when run on your PC?
If you click over to a 'very old' link I have at:
http://proudman.homestead.com/files/optimizing_discoverer_on_client.htm
or at the bottom of this message I've copied it, you'll see #1 is the first thing you want to change.
You may not want to change #2 or #3 but take a look. Also, where the instructions refer to: Disco 3.1 just change to your version (ie: 10). Gotta' update that someday.
Russ
=================================================
3 REGISTRY SETTINGS TO CHANGE
============================
Note that for each of the three suggestions below, if the entry does not exist in your registry, then create it and set the value suggested.
1. Database\QPPEnable
type - DWORD, default 1
To Do: Turn off query prediction.
This can be done by specifying the following registry key:
HKEY_CURRENT_USER\Software\Oracle\Discoverer 3.1\Database\QPPEnable
It should be set to a DWORD value of 0 (zero). To re-enable query prediction at some later point in time, either remove the registry key or set it to 1.
2. Database\QPPCBOEnforced
type - DWORD, default 1
To Do: Stop query prediction forcing the use of the cost-based optimizer.
This can be done by specifying the following registry key:
HKEY_CURRENT_USER\Software\Oracle\Discoverer 3.1\Database\QPPCBOEnforced
It should be set to a DWORD value of 0 (zero) which means use of the Cost-based Optimizer (CBO) is not enforced. The CBO will follow the normal rules of the database server.
3. Database\ObjectsAlwaysAccessible
type - DWORD, default 0
To Do: Stop validating that the tables/views folders refer to exist and that the user has access to them.
This can be done by specifying the following registry key:
HKEY_CURRENT_USER\Software\Oracle\Discoverer3.1\Database\ObjectsAlwaysAccessible
It should be set to a DWORD value > 0 (ie: 1) which means validation will not take place.
------------------------------------------------------------------------------------------------------------------------------------------------

Problem with WE19 Test tool for idoc process

Hi,
I have a idoc in 51 status. This idoc is used for order creation and its an inbound idoc.
This idoc has around 2000 line items. On checking the status for this idoc, i find that in a particular line item(223) error is showing.
So in WE19, I entered this idoc no. and deleted all the line items below the error line item. Now when I click on 'Standard Inbound', I am getting error mssg 'Receipient port invalid', 'idoc was saved but cannot/ should not be processed'.
How to correct this. After this idoc is processed and generates a sales order, I want to insert the error line item and find the issue.
Please help.
Thanks & Regards,
Hari Om

Hi,
Receipient port invalid You must have taken the IDOC from Production and put it in the development or quality I guess.That is why system gives this error.
To solve this issue Click on edit control record fields that is first line. Change the port for the reciepient for example change it from SAPproduction to SAP development /SAP quality
Incase of further queries please reply
Regards
Mano

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.

Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.

I have problem with sharge to visa no accpted

Hi I have problem with sharge to visa no accpted

Hi Louis,
Thanks for your reply. I saw it from the KVM console.
I had reset the CIMC to factory default configuration.
Thanks very much!

I am having major problems with the latest update for my itunes!

I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'. I have completely uninstalled itunes but now it wont download at all. Have tried downloading it 4 times tonight already. Anyone know how to get it to download? Or what to do?

I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'.
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Was there a problem with the last update? Every time I try to watch a video on the net it goes back to the home screen

Was there a problem with the last update? Every time I try to watch videos it goes back to the home screen

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT1338 I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

Have you run Disk Utility/Repair Permissions and/or deleted the .plist from your user library To see the user library, hold down the option key while using the Finder Go to Folder command.

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS6 on two computers and it works fine on one of them. I have tried to reinstall it without succeeding to fix the problem. Does anyone have the same problem and a solution to it?
"Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation."

You must have a Mac. Try this.
Quit Bridge, from user library (NOT system and root library) preferences folder find and delete the com.adobe.bridge5.plist file manual. Do this also in same user library caches folder (Caches/Adobe/Bridge CS6) and inhere find and the folder called 'cache' and drag it to the trash.
restart Bridge holding down option key and choose reset preferences, then try again.

I having problem with the answer question for the App Store. And I forgot the answer

I having problem with the answer question for the App Store. And I forgot the answer

Pleae call 1800MYAPPLE ask to speak to account security

Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

Cellular data is a feature from your phone carrier. Have you contacted them to resolve your issue.

RSAU461, problem with activating update rules for cube 0csrv_c01

Hello,
I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
Regards
Radek

hi
As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
Khaja

Problem with Assemble Test VIs for Run-Time Distribution

Similar Messages

Maybe you are looking for