Problem with azure-media module not installing

Hi,
I built this project out a bit ago and now am trying to deploy to a different mobile service. For reasons unknown, we are encountering errors in that "azure-media" fails to install. Any help is appreciated.
"name": "nietttutestdeploy0",
"version": "1.0.0",
"description": "nietttutestdeploy0 - hosted on Windows Azure Mobile Services",
"main": "server.js",
"engines": {
"node": ">= 0.8.19"
"dependencies": {},
"devDependencies": {
"azure-media": "*",
"mobileservice-config": "*"
"scripts": {},
"author": "unknown",
"licenses": [],
"keywords":[]

To answer my own question/problem. After a good bit more thrashing around, I discovered a post that told me 'npm install' doesn't get run on the server. So the solution is to go ahead and install the modules on your local, then commit the node_modules
folder up into source control. At least for me this appears to have fixed the problem. Not really a standard workflow that I am used to, and a little icky imo.

Similar Messages

Problem with Windows Media Player since installing Firefox 4.0

Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.

What can I do to get the Windows Media Player to work properly?

Problem with wlan sticks module, not able to write to disk any more

Hello everybody,
when I booted my PC today, a strange and some sort of severe problem occurred concerning my wlan stick(s) that I think, I'm not able to solve without your help. I searched for a solution but it didn't seem that somebody else has had a similar problem before.
Here is the description:
I have two wlan sticks (but I do not use both of them nor are they both plugged in at the same time), and both happen to malfunction since today. My "main" stick (used most of the time) is a BigTec Wireless 11N Adapter with a Realtek chipset. My second one (only used to solve problems with the other stick) is a Fritz! WLAN USB Stick (to be used with ndiswrapper).
After bootup, which makes no problems at all, my "main" wlan stick is not able to connect to the network. When I run wicd-curses (I use wicd as network manager), the virtual terminal freezes (when I use urxvt under openbox to run wicd-curses, only the window freezes). After one minute, a message appears that says something about a dbus problem but I am not able to read it because of the screen clears. Then I'm able to use the terminal again, but (and this is the very, very strange about this) when I run any program that tries to write on my disk it stucks, so I can't cancel it with ctrl-c nor can I kill the process. Wicd-curses, ifconfig or iwconfig also crash after entering the command and show the same behavior. At this point, my wlan stick does not show any sign of being plugged in (normally it blinks...).
My second stick makes the computer crash: After a few moments a stacktrace is shown (like when a kernel panic occurs), saying something about "stack being overrun". But I can't find the message in the log files so it is difficult to post it.
When I tried to figure out a solution, I saw in pacman.log, that yesterday udev and hwdetect were updated... But also downgrading all the packages that were updated yesterday did not solve the problem!
I'll post now the last lines of a few logs here (but nothing concerning the ndiswrapper stick, else it would be too disturbing), I hope they help you at helping me!
everything.log
Jan 23 15:25:26 localhost dhcpcd[835]: dhcpcd not running
Jan 23 15:25:27 localhost kernel: [ 21.415035] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
Jan 23 15:25:27 localhost kernel: [ 22.063785] r8712u: 1 RCR=0x153f00e
Jan 23 15:25:27 localhost kernel: [ 22.064534] r8712u: 2 RCR=0x553f00e
Jan 23 15:25:27 localhost kernel: [ 22.170765] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 23 15:25:27 localhost dhcpcd[847]: dhcpcd not running
Jan 23 15:25:28 localhost kernel: [ 22.410354] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
Jan 23 15:25:28 localhost kernel: [ 22.463386] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
Jan 23 15:25:28 localhost kernel: [ 22.463902] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 23 15:25:28 localhost dhcpcd[854]: dhcpcd not running
Jan 23 15:25:28 localhost kernel: [ 22.735037] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
Jan 23 15:25:29 localhost kernel: [ 23.383789] r8712u: 1 RCR=0x153f00e
Jan 23 15:25:29 localhost kernel: [ 23.384535] r8712u: 2 RCR=0x553f00e
Jan 23 15:25:29 localhost kernel: [ 23.490763] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 23 15:26:11 localhost dhcpcd[1382]: dhcpcd not running
Jan 23 15:26:12 localhost kernel: [ 66.495307] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" # then I hard reset because of the freeze
errors.log
Jan 23 15:00:01 localhost /USR/SBIN/CROND[5597]: (CRON) EXEC FAILED (/usr/sbin/sendmail): No such file or directory
Jan 23 15:20:01 localhost /USR/SBIN/CROND[6215]: (CRON) EXEC FAILED (/usr/sbin/sendmail): No such file or directory
Jan 23 15:25:26 localhost dhcpcd[835]: dhcpcd not running
Jan 23 15:25:27 localhost dhcpcd[847]: dhcpcd not running
Jan 23 15:25:28 localhost dhcpcd[854]: dhcpcd not running
Jan 23 15:26:11 localhost dhcpcd[1382]: dhcpcd not running # then I hard reset because of the freeze
daemon.log
Jan 23 15:25:15 localhost [ 0.864888] udevd[48]: starting version 175
Jan 23 15:25:15 localhost [ 4.116488] udevd[235]: starting version 178
Jan 23 15:25:26 localhost dhcpcd[835]: dhcpcd not running
Jan 23 15:25:27 localhost dhcpcd[847]: dhcpcd not running
Jan 23 15:25:28 localhost dhcpcd[854]: dhcpcd not running
Jan 23 15:26:11 localhost dhcpcd[1382]: dhcpcd not running # then I hard reset because of the freeze
I hope you can help me and thank you for trying
hoeffl
P.S.: Excuse all the mistakes I made because of being new here, please!

This seems to be a problem with r8712u on all 3.2.x and 3.3-rc kernels on all distros. I've had it for weeks on Gentoo, Arch, and several other distros.
If you are running a 3.2.x kernel, this is almost definitely the problem. All 3.1 kernels don't do this.
I posted a temporary work-around on the Arch bugzilla, and Larry Finger (kernel dev with wireless) is currently working on it (a patch).
In the meantime, If you compile your own kernels, you can get 3.2.x's to work normally- see my comment here for more details. https://bugs.archlinux.org/task/27996
Top of page doesn't say r8712u, but it's the same problem, and after the first 2-3 comments it deals with r8712u specifically.
There is also info on the Gentoo forum 3.2 kernel quirks thread, towards the bottom of Page 1: http://forums.gentoo.org/viewtopic-t-901702.html
Last edited by wrc1944 (2012-02-03 07:45:32)

I have problem with Itunes," itunes was not installed correctly,Please reinstall itunes, error 7 (windows error 126)"

I also have message on my PC "Impossible to start program (itunes) you are missing MSVCR80.dll on computer.try to reinstall program to solve your problem"
I did reinstall several times with no sucess
also maintained my PC same same...

Follow the directions of ttw in: https://discussions.apple.com/thread/5822086

Could not complete the Render Video command because of a problem with Adobe Media Encoder.

So initially, my problem was solved, but it stopped working again. Same issue. I tried installing the media encoder app, but no luck please help!
Here's the original post:
Hello, I'm running a macbook pro retina, and previously I was able to render video with no issue, and now this is popping up. I've tried deleting and reinstalling photoshop, but it was not helpful. I would very much appreciate any help or guidance. Thanks!
Here's the error message I get:
Could not complete the Render Video command because of a problem with Adobe Media Encoder.
Here's the original thread: Could not complete the Render Video command because of a problem with Adobe Media Encoder.

Have you tried re-installing Photoshop?
Benjamin

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Compatibility problem with macro media flash active control

I am getting a message on my screen "compatibility problem with macro media flash active control, it isnt compatible with my version of windows (vista). How can this be fixed? why am I suddenly getting it now? I have the latest Adobe flash player installed.
Trisha

the latest flash is probably the problem... it's seems that the latest flash has been causing a boat load of issues. i did a system restore to undo the flash and mozilla upgrades and it's still crashing but not as bad as it was with the upgrades.

C8180 error says two side print module not installed but i have used it before

my c8180 printer error says two side print module not installed but i have used it before.i reinstalled printer with cd but did not help. Jean

What operating system? The duplexer typically must be enabled (just once...) in the driver to make it available. Enable the duplexer as shown in the Vista/Win 7 Duplex Printing Troubleshooting Guide here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

I connected my iPod to my PC and got a message 'The software for communicating with the iPod is not installed correctly.

I connected my iPod to my PC and received a message box that read "The software for communicating with the iPod is not installed correctly. Please reinstall the iPod's software." Not sure what I need to do. I did uninstall all of my iTunes and related software components and then reinstalled the latest version of iTunes but that did not correct the problem and I now can't access my iTunes library at all.

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.

Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
Powerbook G4 Mac OS X (10.4.7)

Record rtsp streams with azure media services

Hello.
I see that Azure media service now has rtsp streaming support, but, as I understand, it can stream videos from azure, but what about recording of incoming rtsp streams? Is it possible to record rtsp streams with Azure media Service?
Andrey

Quick correction for you... We support RTMP. Not RTSP.
You can send a live RTMP stream to us and we will record it. You just need to enable a live Channel and start a Program on it. It will archive the live stream to storage so that you can play it back as VOD.

ITunes has stopped working. Problem with iTunes Helper Module

After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?

here you go
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunesHelper.exe
Application Version: 7.3.1.3
Application Timestamp: 468d67e8
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 18fe
Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
Additional Information 3: 4735
Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
Extra information about the problem
Bucket ID: 466198587

Problem with azure-media module not installing

Similar Messages

Maybe you are looking for