Problem with bouncing on my Pro Logic 9

when i record a track on my Pro logic 9 and listen back to it, the sound plays perfectly. but when i bounce it into every format i could, it keeps coming out with a lot of static noise in the background of the track. Please does anyone know what the problem could be??

I have just the same problem!
Did you revolved it?

Similar Messages

I am having a problem with my 2009 Macbook Pro

Hello Everyone,
I am having a problem with my 2009 Macbook Pro . A few weeks ago I plugged it into the charger after running it down to reserve battery power. It appeared to be charging, but then all of a sudden my clock and calender reset to year 2000 and then my computer blacked out and went dead. I tried to boot it up but nothing happened (literally nothing). I have tried 3 different chargers on it, but all I get is a faint green light and even after hours it still won't boot up. I have tried replacing the battery, but still nothing happens.
Any Ideas? I am pretty desperate to get my computer back up and running before school finals.

You may have to see if an authorized Apple service specialist can check over
the charging system (magsafe dc-in board, power adapter, and MacBook/Pro)
and test or run a diagnostic on it, to be sure there is no damage or failed parts.
When you attached the adapter to charge the computer, after it said it was going
to reserve power, did you shut down open applications and stop using the MB/Pro?
That would've been the thing to do, since the margin of run-time near the bottom
of the power cycle can be wrong by the gauge estimate, it can just quit.
While I have not researched your year/model/series in detail, I do know some
models of Apple portable computers have a small battery or capacitor on the
logic board, separate from the main power battery; it may need replacement.
A service provider w/ Apple training & parts would be a likely resource to fix it.
Good luck & happy computing!

New problem with display on Macbook Pro retina (Samsung panel)

Hello All,
I am a very new people on your forum but a few weeks ago i bought a new macbook pro retina with samsung panel.
I haven't ghosting effect on my macbook but i have a new and really bad problem.
I try to found a some information on Russians forums but nobody can help me with it.
I can see an artifacts in the form of flashing pixels on all display.
It occurs in 20-30 minutes after the start of work.
Today i try to test it on game Dirt 2 and i can see defects after 2 minutes after start. So i think it can be reason with Geforce 650 but when i back to desktop and use HD 4000 i still see a problem.
This is best seen on a black screen with high backlight.
When i try to connect TV via HDMI i can't see any problem in my TV.
So i really don't know what could be the reason.
I attached the video with issue to video hosting
http://vimple.ru/579f880e8b7045e09f8fc5bc097c5e2b
Also i have a many software problem like Crashing safari and iTunes. It can be a few times per day.
I really disappointed with my new Macbook.
I haven't any problem with old 2009 Macbook pro with Snow Leopard but Mountain Lion is not working well.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

Problems with the (WINDOWS 8 pro -64 BIT) IN THINKPAD L520 - 5016 RL2

I have some problems with the (WINDOWS 8 pro -64 BIT) is not working properly IN THINKPAD L520 - 5016 RL2.
1. Message appears telling me that the drivers of the display has been restored crash.
2. The mouse pointer moves very slowly sometimes, and sometimes does not move for a while.
3. Device software such as lenovo-airbag protection , lenovo-internet connection and lenovo web connection........ its is not compatible with the system, and do not work.
What is the solution؟

Hi, MUJAHED
I have a few questions for clarification I would like to ask about your first two issues:
1) Can you copy the contents of this message and respond back with them. Any error codes or direct quotation from the system can really help in diagnosing a problem.
2) Does this only apply to the TrackPad, or does this behavior also occur with an external mouse? It may help to download the latest mouse drivers for your system, which can be found here.
As for your last issue with the Lenovo service not being compatible with the system: Unfortunately, software for these applications has not been released for Windows 8. Windows has its own network settings that you can use to connect to the Internet and networks, so that is still possible, though you may not enjoy it as much as Lenovo's program.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Problems with X-Fi Elite Pro

Problems with X-Fi Elite Pro? Hello, everyone!
I'm from Brazil and?I'm having a huge problem with my X-Fi Elite Pro.
A few months ago, my video card stopped working and I replaced it!
But then, my audio card stopped working properly as well!
I reinstalled all the drivers (Video AND Audio) and my SB played my music for about 2 minutes before stop working! I reinstall the drivers, works for 2 minutes, and stop! Then I change de mode "Game" to" Audio Creation" and it keep working. But the stop 2 minuts after. Then i change de mode "Audio Creation" to "Entretainment". It works for 2 minutes and stop. If i try the 3. time, works for 2 seconds and stop. It also happens in the 4. attempt... the 5?... the 6?...
In this 2 minutes, it works fine! 00%! But then stops, with?no apparent reason!
Can someone help me? I don't know what to do, anymore!
My PC:
Intel DP35DP Mother Board
GeForce 9800 GT GB
SB X-Fi Elite Pro
4GB Ram
Intel Quad Core 2.3GHz
Windows Vista Ultimate 64bits
(Sorry for the bad english! But... you know, i'm not very good with foreing languages! lol)
Thank you all!
Rodrigo Guidini.

Wow, guess nobody can help me out here......

Respected sir, i have problem with my mac book pro 13, i shows question mark when i start up the laptop. so please reply with the convinient solution

respected sir, i have problem with my mac book pro 13, i shows question mark when i start up the laptop. so please reply with the convinient solution

ajit5544 wrote:
.. my mac book pro 13, i shows question mark when i start up the laptop. ...
See here > http://support.apple.com/kb/TS2570

Samsung hard drive problems with mid 2009 Macbook Pro

Arghh, this is driving me mad.
I'd like to know if anyone has installed a Samsung HM641JI SATA II hard drive into a mid 2009 Macbook Pro (mine is a 2.8Ghz) and, if so, how they managed it. The drive is 640GB. These are the steps I've taken:
1. Swap out the stock drive for the Samsung
2. Boot from a USB drive which contains a mirror of my system
3. When the system identified the new disk, I formatted it with 2 partitions (GUID table, HFS journaled)
4. Reboot
5. System is very slow. Boots from USB but can't use keyboard to login
6. Switch off and try again
7. Remove Samsung drive
8. Reboot from USB (works perfectly)
9. Downgrade firmware to 1.6
10. Replace samsung drive and try again
11. System boots from USB
12. Verify that drive is running at 1.5Ghz
13. Disk utility and system profiler both crash
14. Disk unmounts by itself and other random weirdness
15. Remove Samsung drive
I've read endless reports about the firmware in this model of Macbook Pro and its issues with SATA II but struggling to find anything current and specific. Two questions:
a. Is there anythign I can do to get this drive to play nicely?
b. What drive should I get if the answer to a is no?
As a bit of background.. my system began playing up last week with lots of spinning beach balls resulting in forced switch offs. Booting from a mirror on a USB drive works perfectly so I concluded that the drive was on its way out. A drive test utility confirmed this. I'm now wondering if it really was the drive or the cable or the logic board.
Any advice appreciated.
Cheers
//A

I'm coming around to the idea that this might be a problem with the SATA cable rather than the drive.
I currently have the stock drive (Hitachi) back in the macbook. It mounted for a while and was then ejected when I tried writing data to it. System profiler reports that "There was an error while scanning for Serial-ATA devices."
I was able to mount the same drive in a USB enclosure this afternoon without any problems. Right now, I seem to be having issues with both the Samsung drive and the Hitachi drive - I wasn't suspicious of thr latter because I thought it was failing.
I found one or two accounts of other people having similar problems that were resolved with a new sata cable.
How does a cable fail? Could this be my problem?
Cheers
//A

I have problems with my Mac Book Pro after I upgraded it

I upgraded my Mac Book Pro from MAC OS X 10.9 to Yosemite version a week ago, and now it doesn´t start

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Font problem with Montserrat and Maven Pro from google

Seems like some fonts don't render as they should in Firefox 29.0.1. I tried to use google web fonts like Montserrat and Maven Pro, no problem with downloading but this fonts don't look good.
I tried to install Montserrat to my Windows 7 (64) and deactivated css so that FF runs the font but same problem occurs.
A really strange problem is that from my computer at work this fonts don't work from FF or Chrome, all versions of IE is fine.
At home i have a laptop with same OS and version of FF and from home it works! But not Chrome..
I have search on the net and at your support site but haven't find any answers yet.
You can look at http://arenago.axiell.com for your self. Below is troubleshooting information from my version of FF where this problems occurs (Sorry about the Swedish)
Programfakta
Namn: Firefox
Version: 29.0.1
Användaragent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:29.0) Gecko/20100101 Firefox/29.0
Kraschrapporter för de senaste 3 dagarna
Alla kraschrapporter
Tillägg
Namn: Classic Theme Restorer
Version: 1.1.8
Aktiverad: true
ID: ClassicThemeRestorer@ArisT2Noia4dev
Namn: Firebug
Version: 1.12.8
Aktiverad: true
ID: [email protected]
Namn: HostAdmin
Version: 1.4.9.2
Aktiverad: true
ID: {bd54afa8-b14a-4d7a-aecf-37e34e882796}
Namn: Web Developer
Version: 1.2.5
Aktiverad: true
ID: {c45c406e-ab73-11d8-be73-000a95be3b12}
Viktiga ändrade inställningar
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.places.smartBookmarksVersion: 6
browser.sessionstore.upgradeBackup.latestBuildID: 20140506152807
browser.startup.homepage: about:blank
browser.startup.homepage_override.buildID: 20140506152807
browser.startup.homepage_override.mstone: 29.0.1
browser.tabs.drawInTitlebar: false
browser.tabs.onTop: false
dom.mozApps.used: true
extensions.lastAppVersion: 29.0.1
font.default.x-western: sans-serif
font.internaluseonly.changed: true
font.name.sans-serif.x-western: Montserrat
font.name.serif.x-western: Montserrat
network.cookie.prefsMigrated: true
network.dnsCacheEntries: 0
network.dnsCacheExpiration: 0
places.database.lastMaintenance: 1400218745
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_bgcolor: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_bgimages: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_colorspace:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_command:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_downloadfonts: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_duplex: -983728976
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_bottom: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_left: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_right: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_edge_top: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_evenpages: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_footercenter:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_footerleft: &PT
print.printer_\\tina\Kajan_HP_LJ_P2055.print_footerright: &D
print.printer_\\tina\Kajan_HP_LJ_P2055.print_headercenter:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_headerleft: &T
print.printer_\\tina\Kajan_HP_LJ_P2055.print_headerright: &U
print.printer_\\tina\Kajan_HP_LJ_P2055.print_in_color: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_bottom: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_left: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_right: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_margin_top: 0.5
print.printer_\\tina\Kajan_HP_LJ_P2055.print_oddpages: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_orientation: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_page_delay: 50
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_data: 9
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_height: 11,00
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_name:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_size_type: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_size_unit: 1
print.printer_\\tina\Kajan_HP_LJ_P2055.print_paper_width: 8,50
print.printer_\\tina\Kajan_HP_LJ_P2055.print_plex_name:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_resolution: 1
print.printer_\\tina\Kajan_HP_LJ_P2055.print_resolution_name:
print.printer_\\tina\Kajan_HP_LJ_P2055.print_reversed: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_scaling: 1,00
print.printer_\\tina\Kajan_HP_LJ_P2055.print_shrink_to_fit: true
print.printer_\\tina\Kajan_HP_LJ_P2055.print_to_file: false
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_bottom: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_left: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_right: 0
print.printer_\\tina\Kajan_HP_LJ_P2055.print_unwriteable_margin_top: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_bgcolor: false
print.printer_\\tina\NRG_MP_C3501_PS.print_bgimages: false
print.printer_\\tina\NRG_MP_C3501_PS.print_colorspace:
print.printer_\\tina\NRG_MP_C3501_PS.print_command:
print.printer_\\tina\NRG_MP_C3501_PS.print_downloadfonts: false
print.printer_\\tina\NRG_MP_C3501_PS.print_duplex: -983728976
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_bottom: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_left: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_right: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_edge_top: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_evenpages: true
print.printer_\\tina\NRG_MP_C3501_PS.print_footercenter:
print.printer_\\tina\NRG_MP_C3501_PS.print_footerleft: &PT
print.printer_\\tina\NRG_MP_C3501_PS.print_footerright: &D
print.printer_\\tina\NRG_MP_C3501_PS.print_headercenter:
print.printer_\\tina\NRG_MP_C3501_PS.print_headerleft: &T
print.printer_\\tina\NRG_MP_C3501_PS.print_headerright: &U
print.printer_\\tina\NRG_MP_C3501_PS.print_in_color: true
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_bottom: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_left: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_right: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_margin_top: 0.5
print.printer_\\tina\NRG_MP_C3501_PS.print_oddpages: true
print.printer_\\tina\NRG_MP_C3501_PS.print_orientation: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_page_delay: 50
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_data: 9
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_height: 11,00
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_name:
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_size_type: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_size_unit: 1
print.printer_\\tina\NRG_MP_C3501_PS.print_paper_width: 8,50
print.printer_\\tina\NRG_MP_C3501_PS.print_plex_name:
print.printer_\\tina\NRG_MP_C3501_PS.print_resolution: 1
print.printer_\\tina\NRG_MP_C3501_PS.print_resolution_name:
print.printer_\\tina\NRG_MP_C3501_PS.print_reversed: false
print.printer_\\tina\NRG_MP_C3501_PS.print_scaling: 1,00
print.printer_\\tina\NRG_MP_C3501_PS.print_shrink_to_fit: true
print.printer_\\tina\NRG_MP_C3501_PS.print_to_file: false
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_bottom: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_left: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_right: 0
print.printer_\\tina\NRG_MP_C3501_PS.print_unwriteable_margin_top: 0
privacy.cpd.siteSettings: true
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.timeSpan: 0
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1399495195
user.js-inställningar
Din profilmapp innehåller en user.js-fil som inkluderar inställningar som inte har skapats av Firefox.
Grafik
Adapter-RAM: 512
Adapterbeskrivning: NVIDIA GeForce 7950 GT
Adapterdrivrutin: nvd3dumx,nvd3dum
ClearType-parametrar: D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ] D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ]
DirectWrite aktiverat: false (6.2.9200.16492)
Drivrutinsdatum: 1-31-2013
Drivrutinsversion: 9.18.13.783
Enhets-ID: 0x0295
GPU #2 aktiv: false
Grafikaccelererade fönster: 1/1 Direct3D 9
Leverantörs-ID: 0x10de
WebGL-renderare: Google Inc. -- ANGLE (NVIDIA GeForce 7950 GT Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: skia
AzureContentBackend: cairo
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Tillgänglighet
Aktiverad: false
Förhindra tillgänglighet: 0
Biblioteksversioner
NSPR
Förväntad minimiversion: 4.10.3
Version som används: 4.10.3
NSS
Förväntad minimiversion: 3.16 Basic ECC
Version som används: 3.16 Basic ECC
NSSSMIME
Förväntad minimiversion: 3.16 Basic ECC
Version som används: 3.16 Basic ECC
NSSSSL
Förväntad minimiversion: 3.16 Basic ECC
Version som används: 3.16 Basic ECC
NSSUTIL
Förväntad minimiversion: 3.16
Version som används: 3.16

Many site issues can be caused by corrupt cookies or cache. 
Clear the Cache 
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
 and 
Remove Cookies '''''Firefox/Tools > Options > Privacy.''''' 
Under '''History''', select Firefox will '''Use Custom Settings'''. 
There is a button on the right side called '''Show Cookies'''. 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Poke around safe web sites and see if there is still a problem. Then restart.
 
This may or may not help you; 
'''''[https://addons.mozilla.org/en-US/firefox/addon/nosquint/?src=external-Add-ons_Manager_Context_Menu-extension NoSquint]''''' 
NoSquint allows you to adjust the text-only and full-page (both text and images) zoom levels as well as color settings both globally (for all sites) and per site.

Problem with installing Paint shop Pro photo X2 on with Vista

Trying to install Paint shop photo x2 on my note book but at the end of the installation it freezes and there seems to be some problem with "registering"...
Corel (supplier of paint shop) now advised me to change some drivers but the links I received are for XP or lower versions.
Is there anybody who had the same problem and find the solution?
i have tried already several things (like shutting down norton, msconfig changes etc)....
Thanks for your help!

Hi
I have noticed that not all programs and applications are compatible and support the Vista OS. Did you check if this program supports Vista?
I think this should be clarified firstly.
I would recommend contacting the Paint shop Pro manufacture for the troubleshooting.
Good luck

Problem with fingerprint on HP Pro x2 612 g1

hi
i'm having problem with fingerprint on my HP Pro x2 612 g1.. i've installed all of the drivers which i have downloaded using your site and i can see fingerprint option but there is no add button under it.. i'm using windows 8.1 pro 64bit
need your help..
thanks

Here are the direct links to the fingerprint drivers:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7268930&swItemId=ob_138590_1&swEnvOid=415...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7268930&swItemId=ob_134806_1&swEnvOid=415...
Let me know if that helps.
-Chris
I work for HP.
Support Forums are now on your mobile phone: http://m.hp.com/supportforum

Problem with battery for MacBook Pro 2007

I have a problem with battery that was replaced during video card service 1.5 years ago
Battery health was around 80% and it stopped to work, I continued to use notebook with power cable and after week the battery become like this!
spoke with person in Apple store and got answer that it is not covered by Apple and I will need to buy another new battery.
For me it looks like manufacturing problem and I'm not expecting that after 1 year my battery will die like this! Thanks that it didn't explode!
What I should do in such case?

Thanks for your reply!
All my battery story is ending with bad taste...
I always relied on quality of the Apple products, it brought me to change all computers and phones to Apple brand. I was ready to pay extra for their products...
This battery has an Apple brand on it and I'm expecting that Apple will take some responsibility for it.
First battery on my MacBook Pro 2007 worked without any problem for 4 years, then it was replaced by Apple service tech person for unknown reason. This "new" battery failed just after ending of 1 year warranty coverage and even deformed in such scarry way. And now I don't have any option to ask if there is possibility that I'm experience a manufacturing defect! And I know that it is possible, internet is full of negative comments for these batteries!
Now I'm asking myself again, if it worst to buy Apple products? Are these products have proper quality?

Problems with new Mac Book Pro 13'' +power adaptor

Hi there,
I'm new here and first of all I'd like to appologize from my lack of technical language, since my only interesst in computers is that they don't give me problems so I can keep not knowing too much about them.
Ok, so I bought the new Mac Book Pro 13'' exactly 2 months ago cause my old and long travelled Power Book G4 died. I didn't hesitate to spend the money to buy the new one, cause I was so happy with my experience with the old one and in my mind returning to PCs was not even considered.
BUT...I'm not totally happy about my new laptop...from day 1 Safari would just close itself but I didn't give too much thought about it. After this, not only Safari can close up to several times a day, but also iphoto or any other program that I use for work. But that's not all..One day it would take minutes to start running and it would go extremely slow...another day it would start also very slow but also it wouldn't show the tools bar on top or my folders. Another time it would show me, instead of the normal starting page, a page where it would ask me to accept or not a kind of revision for hardware. After so many problems of course I pressed yes...everything seemed normal, then computer started and seemed to be running normal again (aside from this safari and other programs that shut down). Today my computer, when moved, just went totally blank but fortunately I could start it with nor problems after it.
So...anyone knows what the problem must be?? Should I take it to a Technical service ??? and there's another issue...i'm handing in m phD in a week so I can't just be without computer now, and in a week I'm flying to Canada where I also will need my computer for work...what can I do???
And the second problem...the power adaptor from the beginning seemed to act funny sometimes...sometimes charching, sometimes not, I would follow the instructions in the support part and after being several minutes changing one cord for the other, to keep it 1 minute disconnected and so at some point it would start functioning again. But this happened seldom so also I would think it was a protectiion mechanism of the adapter. But, when this is happening more often than not, then it gets annoying. Also I've been transporting it in a careful way since I bought it to find that after only 2 months in the cord (from the computer to adaptor) you can see the internal cable as if there was some cut...a third one seems to be appearing too. I've taken it to the technical support and the guy who was helfpul but also honest said he couldn't do anything for me cause since there were those cuts, he could always be said that it was a misuse of it-an accident and then he would have to pay the replace himself. Well, it's not!!! My old adaptor has been transported in a way less careful way and it's survived with NO problems for 5 years. The material is clearly different from the old cord. This one because it's new, I only need to put it in a special bag air protected. Honestly I don't feel happy to pay 80 € for an adaptor that I don't know if it's gonna last me only 2 months or that I know I can't transport normally. The guy suggested me to ask in forums and to call directly to the apple technical service.
Again, has anyone had any similar problems with the adaptor???
Rosanna

Take it to an Apple retailer and have the computer repaired. It is still in warranty.

Problem with bouncing on my Pro Logic 9

Similar Messages

Maybe you are looking for