Problem with cell selected and editing

Hi!
I set JTextField as a cell editor in table.
1.When I selected cell wih mouse the method isCellEditable(EventObject anEvent) of DefaulCellEditor is call. OK. But when I selected cell with keyboard, this method DO NOT CALL. Why? How I can understand that any cell is in focus (without double click in cell).
2. When I double click on cell and start type the methods of KeyListeners (keyPressed and so on) are calls. OK. But when I only select cell (caret is not blink in cell) and start type the methods of KeyListeners DO NOT CALL. Why? And how I can get what I was typed in this case?
Thank you.

Andre,
Welcome to SDN...
Try using NDIV0 , and see if the problem is due to divide by zero or Web report as such. Strange that it works in BeX but does'nt work in WAD...
Arun

Similar Messages

CUIC 8.5 - Problem with Save As and editing reports

CUIC 8.5.2. I have users set up with Roles of Login User, Dashboard Designer, Report Designer, Report Definition Designer and Value List Collection Designer. They also have Read Execute and Write Permissions. Problem is, if they run a stock report, the Save As, and Edit options on the report are greyed out and inactive. What is missing in order for users to be able to create custom reports? Any help would be appreciated.

I might have ran into this at some point last year, I think (but I could be wrong) if you setup the write permissions for the user group, it should then fix it for everyone. You might want to give that a spin in case you have a lot of individual users.
Glad the solution worked though. Thanks for the points.
david

Problem with Nested Templates, and Editable Attributes

Hi all, I've run into the following problem. I have a
template called A. I created a nested template B from A. I made an
attribute editable to B, in A. The problem I am having is that I
would like that attribute still editable in a page derived from the
template B. As it is right now, the attribute is frozen, and can
only be editted by children of template A.
Is there a solution to my problem out there?

> Is there a solution to my problem out there?
Yes - but not one you will like. Don't use nested templates.
Why are you?
But you can investigate the use of the passthrough attribute
for editable
attributes....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jpoma" <[email protected]> wrote in message
news:famtv9$bs2$[email protected]..
> Hi all, I've run into the following problem. I have a
template called A.
> I
> created a nested template B from A. I made an attribute
editable to B, in
> A.
> The problem I am having is that I would like that
attribute still editable
> in a
> page derived from the template B. As it is right now,
the attribute is
> frozen,
> and can only be editted by children of template A.
>
> Is there a solution to my problem out there?
>

Problem in cell selection in JTable Java Swing

hii
I am using JTable that shows data from database. I have developed one functionality. I change one cell value and then select multiple cell. If I press F12 function key then it copies first selected value and past it to another selected cells. it is working properly but when I press F12 it sets the last selected cell in editable mode. I want that all cell which has been pasted should be selected (with default blue colour not in editing mode). I am using ListSelectionListener for JTable Cell Selection and KeyListener for F12 functionality.
Please give some solution
I can not override editCellAt Method because i have already extended JFrame. and i tried to do this with Jtable.getSelectedColumn and getSelectedRow it is displaying the same value, by this how can I get the particular area of selection means Row nd Column Selected.
How would I know the current selection when user selects more than one cell???
Thanks
Edited by: 850979 on 11-Apr-2011 02:13
Edited by: 850979 on 11-Apr-2011 03:59

camickr wrote:
Presumably, JTable installs an action for the F12 key that results in starting editing the last selected cell.
There are no bindings for F12. See the [url http://www.camick.com/java/blog.html?name=key-bindings]Key Bindings listing. (...)
Right.
Of course it doesn't make sense that a F? key should invoke the editorI thought he meant F2 ("edit" on Windows), so that sounded natural.
All KeyEvents are passed to the editor for the cell and the editor is psuedo invoked. That is, the caret is not placed on the text field used as the editor, but the character typed is added to the editor. You can then either use tab/enter to save the text or use the escape key to cancel the editing.Thanks for the explanation. I had never noticed (I kept on double-clicking my JTable cells when I wanted to edit them! :o)
Of course it doesn't make sense that a F? key should invoke the editor, but this is a by product of all KeyEvents being forwarded so you don't have to have special Key Bindings for every character.You're right - as always.
They (Sun) could have filtered out some of the keys such as those, though, because as noted by the OP the current behavior is unintuitive.
To better control when the cell is editable based on the KeyEvent you can override the table with code like <snipped>
As you suggested using a Key Binding will prevent this behaviour as well (but only for that key).Right again, but in this specific case that is acceptable (the developer wants to attach a specific behavior to a specific key only).
OP here is an SSCCE of that second approach:
public class TestKeyBindingsOnJTable {
    public static void main(String... args) {
        final DefaultTableModel dtm = new DefaultTableModel(new String[] {"A", "B"}, 0);
        dtm.addRow(new String[]{"A1", "B1"});
        dtm.addRow(new String[]{"A2", "B2"});
        dtm.addRow(new String[]{"A3", "B3"});
        JTable table = new JTable(dtm);
        table.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_F12, 0), "clear");
        table.getActionMap().put("clear", new AbstractAction() {
            public void actionPerformed(ActionEvent e) {
                dtm.removeRow(0);
        JOptionPane.showMessageDialog(null, table);
}Edited by: jduprez on Apr 8, 2011 9:36 PM

HT201269 how do I merge multiple duplicate contact entries with cell home and e-mail entries

how do I merge multiple duplicate contact entries with cell home and e-mail entries?

Try linking cards:
Open any contact you want to merge, tap on Edit and look at the bottom part of it. You'll find 'Link Cards' and from there you may select the contact you want to link with the one you're looking at. So if you have:
Contact 1: John A (job)
Contact 2: Business Name (who is also John A but you saved it as a different contact)
Contact 3: Something else that's also John A
You can link all three cards into one. If you choose to, you may unlink them at any time, just tap Edit and then the red circle. Your contacts won't be deleted, but they won't appear under the same ID anymore.

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problem with Cell size in Excel output of XML report

Dear all,
I am facing a problem with cell size when i run my XML report in Excel output. I found that it imitates the cell size of whatever i gave in the RTF. I cannot increase the cell size in RTF as my report contains 60 columns and max width of MS Word table is 22 inches.
Can any one suggest a way of doing this which shows full data in Excel sheet depending on the column data size with out any word wrap.
Thanks
RAJ

Hi ,
You can try with
<xsl:attribute xdofo:ctx="block" name="wrap-option">no-wrap</xsl:attribute>
may be helpful to you
Thanks,
Ananth
http://bintelligencegroup.wordpress.com/

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

My macbook is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page what do i do?

My macbook Pro is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page with language select what do i do? Also i dont have enough monet to go to the apple store to get it fix and another thing this happen after i tried to factory reset it without the disck uising coomans i found on youtube.Lastly befor doing the comands my macbook would open any applications and the finder would just blink on and off on the dock.
Heres the link http://www.youtube.com/watch?v=Q5e5thk0O9o

Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Leopard - This will install a "fresh" copy Leopard without archiving old system files but leaves the rest of your files in place.
If you still want to restore your computer to factory level...
Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
To restore read the instructions in the Mac OS X v10.5 Leopard - Installation and Setup Guide PDF

Select and edit text Adobe Reader 8.1.2 & Mac OS10.5

How does one select and edit text in a PDF Adobe Read document with Mac OS 10.5? Step by step directions would be appreciated.

Wasn't sure since this isn't the Reader forum.
No. Can't do that then.

I have a problem with indesign cs6 and my epson 3880 on mac

I have a problem with indesign cs6 and my epson 3880 on mac. I need an older version of indesign but do not have a serial number....any suggestions?

I see then I believe Kglad's advice is on track with starting with updating your printer drivers. I have also moved this discussion over to the InDesign forum as the Users in this forum likely have additional suggestions.
Also if you can please turn off your e-mail signature if you want to respond via e-mail. Your responses are going to a public forum where the information is accessible by anyone. I have edited your previous response to remove the signature.

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

Column selection and editing

Is there any way to do text column selection and editing with JDeveloper? Why is column selection so often overlooked in editors such as JDeveloper and Eclipse while editors I've used years ago (Brief, UltraEdit, MultiEdit, etc) had great support for column editing?

Editing text. Not HTML, not db columns. The ability to highlight and mark a rectangular section of text. Also known as block editing. The ability to highlight a vectical column as opposed to a horizontal column.

Problem with cell selected and editing

Similar Messages

Maybe you are looking for