Problem with change/delete structure in package

Hello!
I got the task to delete a package in the ABAP Dictionary. In this package there are structures that I can´t delete. I get the following message:
You cannot edit object R3TR TABL Y1LASME with the standard editor
Choose 'Display object' or 'Cancel'.
Y1LASME is one of the structures. The other one I don´t know.
So, how is it possible to delete this structure and then to delete the package?
Thanks.

Did you do a where-used on the segment to see which extension it is still used in?
In that case the only thing you need to do is to go to transaction WE30, put in the extension name in object name, select extension radio button and go into change mode (don't forget to cancel release before doing that), then just set the cursor on your segment and cut it out, save and exit. Don't forget to set the release again.
In case the where used does say that it is not used any more than there is an inconsistency in your system or some navigation index is not up to date.
If you are 100% sure that the segment is definitely no longer used, you always have the possibility to debug :
Set a breakpoint in include MSED4F01 form routine segment_delete in line 184 (ECC6) at statement IF l_rc eq 0. which is fter the statement PERFORM segment_check_usage USING pi_object l_rc.
The l_rc should be 4, so at that point just change it to 0 and the delete part will be executed.
HOWEVER - if this segment is still used in an extension any Idoc running in or out using this extension will at least no longer work or even dump!!!
Hope that helps,
Michael

Similar Messages

Problems with the O2 blackberry data package on my Curve 3G.

I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.

Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart

HT5137 I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

Personally, I would never use a debit card online, for security reasons. If your card gets hacked its your money that is stolen. At least with a credit card it is the card providers money that is stolen.
Anyway, I would delete the app and re-install. If you paid for the app in the first place you will be able to re-install free of charge. Also, the app should allow the in-app purchase to happen again as it should recognise that you have already purchased it previously.
Finally, it might be that the 3G doesnt have as much ram as more recent models of iphone and you may have applications running in the background that are preventing the app to function with the in-app purchase unless you shut down any apps eating all you memory that are running in the background. Shut-down these apps (and the simpson tap out app) by exiting to your home screen and double-tapping the home button to show what apps are running in the background. press and hold any of the open apps until it starts shaking. close all the apps down. exit then re-launch the app.
good luck.

Having problem with change of name in the datagrid Coding

I am having problem with changing the name of the datagrid header text name for one of the data either in the flash file or the php file.
The thing is i want to change the Course_Name to Course Name that has no underscore so that it will look nicer in the datagrid but if I change it in the php file like SELECT Course_Name as 'Course Name' ....., it will not turn out in the datagrid when I CTRL ENTER the flash file but the others like Price,description and display is shown.
There is no problem with my php code but I do not know how to change the Course_Name into Course Name so please help me resolve this error that I am having.
This is my flash code
function goCourse(e : MouseEvent):void
gotoAndStop(5);
refreshResponder = new Responder (refreshSuccess, onFault);
connection = new NetConnection ();
connection.connect (gateway);
dataDG.addEventListener (Event.CHANGE, gridItemSelected);
refreshData (true);
function gridItemSelected (e: Event): void {
ID = e.target.selectedItem.ID;
courseTxt.text = e.target.selectedItem.Course_Name;
priceTxt.text = e.target.selectedItem.Price;
descTxt.text = e.target.selectedItem.Description;
private function getParams () {
var param: Object = new Object ();
param.ID = ID;
param.Course_Name = courseTxt.text;
param.Price = priceTxt.text;
param.Description = descTxt.text;
return param;
private function refreshData (refresh: Boolean): void {
if (refresh)
connection.call ("Course.viewCourse", refreshResponder);
private function refreshSuccess (result: Object): void {
dataDG.dataProvider = RecordSetDP.toDataProvider (result);
dataDG.columns = ["Course_Name","Price","Description","Display"];
private function onFault (fault: Object): void {
trace (String (fault.description));
This is my php file code.
function viewCourse()
$this->connect();
$sql = "SELECT Course_Name,Price,Description,Display
FROM coursetb";
return mysql_query($sql,$this->_connection);

i don't see where you're calling your php file in your code, but change 'Course Name' to 'Course_Name' (or vice-versa) there.

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

G4 mini has a problem with its volume structure

My G4 mini has a problem with its volume structure according to Tech Tools Deluxe. One that the application can't seem to repair. Ran it 3 times and it always hangs before it completes the fix. Never hangs in exactly the same place in the repair routine, but always hangs.
Ran these tests because for the longest time the mini would accelerate (panic) and shut down. Installation on a new system hangs before it completes the install of all the upgrades. Any help would be appreciated.

I realize it was not clear from the original post whether or not DiskUtility had been tried yet to fix the hard drive.
To use DiskUtility to repair the drive, you have to boot from the original install disc that shipped with your Mini.
1) Insert the Install disc and the shutdown the Mini.
2) Restart the Mini and hold down the C key as soon as the startup chime or beep is heard. Hold it down until you see the "gear" spinning on the screen.
3) Select your language, but don't proceed any farther with installation. Use the Utilities menu at the top of the screen to run DiskUtility.
4) In DiskUtility, click once on the hard drive in the left panel, then click on the Repair Disk button in the right panel.

SSRS 2012, SQL Server 2012. Problem with changing database

Hi all!
I have a problem with changing database for SSRS.
I have a SSRS 2012 and SQL Server 2012. These programs is on WIndows Server 2012.
I need to link SSRS to the new database instance. For this I run SSRS Configeration Manager, open tab Database, click Change Database. Then I choose option "Choose an existing report server database", click Next, write the server name, test
connection (it's successed) and push Next again. Then I see this error message:
Error
The feature: "Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services.
OK
I'm confused, cause I have compatible versions of programs and THIS error.
Please, help me.
Thanks.

Hi Kirill,
From the error message, we can know that the issue may be caused by incorrect editions of SQL Server for report data sources are used as the Report Server Database.
When creating a report server database, please be aware that not all editions of SQL Server can be used to host the database. So we should make sure that we have used the correct database as the
Report Server Database. For more details, please refer to the “Report Server Database Server Edition Requirements” section in the following document:
http://technet.microsoft.com/en-us/library/cc645993.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).

HT1918 problem with changing the payment information

I've got a problem with changing the payment information !!
when I change them and I followed the instruction , and when I click done
it says " for assistance, contact iTunes support at " the link " . and nothing
change , so what should I do ?

Hi Bart,
The description of the field VBKD-BSTKD will appear in sales order (VA01/02/03) Header Order data tab.
If you notice the text for below one it is PO Number where Number starts with upper-case N and it iis not the one which you changed.
Also this is a hyperlink to sales header order data screen.
You need to enhance the code via sales exit to fix this.

Problems with cascading delete with entities

I have a problem with cascading delete. I have two entities, Notebook and Note. One instance of Notebook can have several instances of Note in a Collection< Note >. The two entities are joined with a join table notebook_note that have two columns, the PK from the table of Notebook and Note. Note is not aware of the relation.
From the user interface some elements of the collection<Note> can be added or deleted. I want to delete an element of that collection and make it persisted on the DB.
If I add some Note elements to the collection and then I EntityManager.merge(notebook) (see public void persistNotebook() code below), I have all them persisted on the DB.
However, if I delete some preexisting Note elements, after the merge I found deleted only the corresponding rows from the join table notebook_note BUT the rows in table Note, that was belonging to the deleted instance of Notebook, are NOT removed.
Till now I found a way to do that (see code UserBean below), but I think that there is a simpler and so better way to do that! I hope to receive some suggestions!!
@Entity
public class Notebook implements Serializable {
private static final long serialVersionUID = 1L;
private String userName;
private Collection<Note> notes;
public Notebook() {
public Notebook(String userName) {
this.userName = userName;
notes = new ArrayList<Note>();
@Id
public String getUserName() {
return userName;
public void setUserName(String userName) {
this.userName = userName;
@OneToMany(cascade = {CascadeType.ALL}, fetch = FetchType.EAGER)
public Collection<Note> getNotes() {
return notes;
public void setNotes(Collection<Note> notes) {
this.notes = notes;
@Entity
public class Note implements Serializable {
String note;
public void setNote(String note) {
this.note = note;
public String getNote() {
return note;
@Stateful
public class UserBean implements UserRemote {
private static Logger log = Logger.getLogger(UserRemote.class);
@PersistenceContext(unitName = "etourism-ejbPU")
private EntityManager em;
……
@TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
public void persistNotebook() {
NotebookDao notebookDao = new notebookDao(em);
notebookDao.merge(notebook);
em.flush();
public void deleteNotebookNote (….) {
…..
//noteFound is the note I want to delete from the Collection<Note>
notebook.getEvents().remove(noteFound);
persistNotebook(); //see method above
*//I have also to explicitally delete the associated note!!!*
*NoteDao noteDao = new NoteDao(em);*
*noteDao.remove(noteDao.read(noteFound.getId()));*
public void addNotebookNote(…..) {
//add new note to the collection<Note> of the Notebook
Note newNote = new Note(…);
notebook.getNotes().add(newNote);
persistNotebook();
Where:
public class NotebookDao extends JpaDao<Notebook, String> {
……
public abstract class JpaDao<T, PK extends Serializable> implements IDao<T, PK> {
…..
public void remove(T entity) {
getEntityManager().remove(entity);
public void merge(T transientObject) {
getEntityManager().merge(transientObject);
}

Thank you gimbal2 for your answer.
You are right saying that a single Note could be bound to multiple notebooks, when using a join table, so the cascade cannot be done automatically by JPA.
However, in my case, a single Note is bound only to one Notebook, so I would like to drop the join table (as you rightly suggest): however when I declare in the Notebook, a relation 1:N in this way ...
@OneToMany(cascade = {CascadeType.ALL}, fetch = FetchType.EAGER)
private Collection<Note> notes;
... the join table is automatically created during the deploy.
Sorry, I am a beginner in EJB3. What kind of relational mapping annotation should I use to have a straight 1:N relationship that doesn't generate a join table?
I think that it should be better to avoid to modify the relationship (es. cascade option) directly in the created db tables and let the logic be declared in the entity code definition: am I right?
Waiting for your suggestion ...
thank you very much
Enzo
Edited by: contini on May 22, 2009 5:37 AM

Problem with syntaxes and structures in unicode

1. i have a problem with syntax
this is old syntaxes
TRANSLATE c ...FROM CODE PAGE g1 ... TO CODE PAGE g2
new systems should use this class instead of above
CL_ABAP_CONV_IN_CE
it reads data from a container and converts it to the system format.
my old syntax is TRANSLATE header-id FROM CODE PAGE file_tab-codepage.
i need to change to new one by using above class how to do it
2. I have a structure are_buffer and i am working on upgrade of a old report , i have used a sap predefined structure callled arc_buffer from se11, now when i am using offset in one of the perform statement like
PERFORM read_file USING handle_tab_wa-offset record_len
CHANGING arc_buffer(record_len)
error_handling
p_message.
but the system throws a error called ''the structure arc_buffer(record_length) does not start with character-type field''.
i cannot change the structure becoz its sap standard structure .
how to get out of this.

Moderator message - Cross post locked
Rob

Keyboard problems with Enter, delete, backspace, and right/left arrows

In some applications, such as Yahoo and this message block right now !!, when composing a message, the arrow keys and delete, backspace keys become non responsive. Various ones will work on a random basis.
I am getting double "carriage returns" also. Maybe this is why in Omegle when I press ENTER, it will not post a chat message; it will bring up a scroll box and for me to post the comment, I have to use the mouse to click ENTER.
I have changed batteries in my keyboard, uninstalled /reinstalled Firefox. I have checked the above websites in Chrome and other browsers, and there are no problems.
This has happened before, I don't recall what the solution was or if it just went away.'''
Affected sites -- at least these
http://us.mg6.mail.yahoo.com/neo/launch?ncrumb=Fx5R4O7ccqb&.rand=1041364415&nmig=yes#
http://omegle.com/
https://support.mozilla.com/en-US/questions/new?product=beta&category=b2&search=Keyboard+problems+with+Enter%2C+delete%2C+backspace%2C+and+right%2Fleft+arrows&showform=1

PROBLEM SOLVED: http://forum.archlinux-br.org/viewtopic.php?id=1257
Solution posted on Brazilian Archlinux forum. Credits to user "920608".
[cache]
/etc/xorg.conf
Section "Files"
#RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
C'ya

10.5.3 problem with changing computer name

Having an issue with computer naming after 10.5.3. Here is the issue:
New Leopard install, fresh
Installed all updates, including the 10.5.3 update
Change the computer name in System Preferences\Sharing
The new name is reflected in Computer Name field
The new name is also reflected as the Local Hostname under Edit
Rebooted the machine
Look at System Preferences\Sharing\Service and none of the services reflect the new computer name\local hostname, the old computer name is listed for each service
Click on the Edit button and deleted the Local Hostname, left it blank and clicked OK
Now the new Local Hostname is listed for each service
Open a Terminal window and the old computer name is listed at the prompt
Reboot the machine
Open a Terminal window and the old computer name is listed at the prompt
Not being a Unix guru, I assume there may be a way to modify the computer name some other way than through the GUI. I sure hope so cause the new patch that was supposed to fix an issue with computer names appears to have created a new bug.

I'm posted an image of Aperture corruption, fresh this morning:
http://lemon.soju.co.uk/2008/06/05/would-you-trust-your-photos-to-an-application -that-does-this/
- New iMac 3.06GHz Dual Core, 4GB Memory, NVidia 512MB (received Sunday 1st June 2008)
- 10.5.2 upgraded to 10.5.3, then Aperture 2.1 trial installed
- First import of 40GB of photos, left to run overnight
- When trying to use this morning, Aperture screens were corrupt and it refused to shut down. I had to power off then boot back into Mac OS X. When I restarted Aperture it worked, but it still seemed to have problems taking over the machine - eg, I wasn't able to send mail from Gmail within VMWare Fusion until I closed down Aperture. I never have problems with VMWare Fusion.

Problem with changes and visualization in the forms

I have a problem with forms, the problem is the next, I do a modification in the database with a update or with form and in other station no visualized the change. The other station need close the form and open for visualize the modification.
Why I have this problem

I am not sure what you mean. Are you saying that after one form changes and commits data, it is not visible on the other user's screen?
If that is the problem, unfortunately, that is the way Forms works. A form must re-query the data to see changes on the database. If your form must close and re-open, then you should create a trigger in your form to re-query the same data.
I hope this helps.

Problem with change capture

HI,
we've a problem with the Change Capture in the DAC's Execution Plan.
We've cretead a new data model but we want to reuse the image table and the Change Capture process, so we've perfomed the following step:
1) create the mapping SDE e SIL for the new tables of datamodel in Informatica Power Center
2) register these mapping in the DAC
3) create a subject areas and associate these tasks to this
4) create execution plan including "change capture" and "change capture sync"
5) execute our "execution plan"
the problem is the following:
from the Execute -> Current Run Tab -> task
we can see that execution time of change capture is 0
from the Execute -> Current Run Tab -> task details
there aren't any change capture details
So, our image table are empty.
Do you have any idea?
Thanks in advance,
Antonello.

HI Antonello,
I am also having the same issue like you. I have created a new execution plan in DAC 101341 and ran it. It seems like the task Change Capture For Siebel OLTP completed in 0 seconds and there are no details for that particular task. Can you please let me know if you have resolved this issue? Your help is much appreciated.
Thanks
Ravi

Problem with change/delete structure in package

Similar Messages

Maybe you are looking for