G4 mini has a problem with its volume structure

My G4 mini has a problem with its volume structure according to Tech Tools Deluxe. One that the application can't seem to repair. Ran it 3 times and it always hangs before it completes the fix. Never hangs in exactly the same place in the repair routine, but always hangs.
Ran these tests because for the longest time the mini would accelerate (panic) and shut down. Installation on a new system hangs before it completes the install of all the upgrades. Any help would be appreciated.

I realize it was not clear from the original post whether or not DiskUtility had been tried yet to fix the hard drive.
To use DiskUtility to repair the drive, you have to boot from the original install disc that shipped with your Mini.
1) Insert the Install disc and the shutdown the Mini.
2) Restart the Mini and hold down the C key as soon as the startup chime or beep is heard. Hold it down until you see the "gear" spinning on the screen.
3) Select your language, but don't proceed any farther with installation. Use the Utilities menu at the top of the screen to run DiskUtility.
4) In DiskUtility, click once on the hard drive in the left panel, then click on the Repair Disk button in the right panel.

Similar Messages

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one?

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost

Magic mouse has a problem with its moving..

Dear guys,
Has anyone had a problem with magic mouse that it does click and scroll up/down but the mouse is impossible to move a cursor. Should you have any ideas, please get me out of this problem.
Thanks a lot in advance.

Hello:
It may help, and cannot hurt:
1. Reset the PRAM
2. Reset the SMC.
Barry

I'm trying to update my ipod touch but every time it downloads its fine until it processes it and it says it has a problem with my connection but my firewall is off?? Please help.

but every time i try to its fine until it processes it and then it says it has a problem with my connection but my firewall is off?? Please help.

I'm having the same problem trying to update my iphone 4(Just got a replacement), I also have firewall off...Hopefully someone can help. Mine says error -3259

HT4623 i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

Have you tried the restart/reset/restore troubleshooting path? That would be the best initial set of steps to take, particularly in a situation like this.

My wife's iPad mini has a problem. When she types in the word 'sweet' in safari or Facebook it is auto replaced with the word ' f@€¥ing" the full word. Can anyone help

My wife's iPad mini has a problem. When she types in the word 'sweet' in safari or Facebook it is auto replaced with the word ' f@€¥ing" the full word. Can anyone help

Check her keyboard shortcuts:
Settings > General > Keyboard > Check the shortcuts list

X-Fi Notebook has a problem with headset/line-in

0X-Fi Notebook has a problem with headset/line-in` First the basics:
-HP Pavillion dv6000
-Intel Core 2 Duo @ .83 GHz
-Windows Vista Home and Student (SP) 32 bit
-3 GB RAM
Ok, now the problem:
-Ever since I got my Sound Blaster X-Fi card for this past christmas, I've had a problem with using the headset/lin-in port on it. Its only now that it's gotten to be a big enough irritation for me to need to fix it. I went to play some BF2 and hook up my earphone/microphone combo. The problem is, that the default recording device "Line-in" doesn't detect any sound when I have it plugged in. Further more, when I change it to "SB X-Fi micropone" it does detect my voice, but its on some kind of feedback loop, because it then transmits whatever the mic picks up onto my speakers/headphones/whatever I have plugged into it as an output. Its almost like they have the "line-in" and "microphone" functions either switched or blended into one. I did a complete reinstall of the drivers and software, but no luck. Any suggestions would be much appreciated.
Thanks guys

Hi,
What I mean is the microphone jack on your x-fi notebook. since you are saying you can hear yourself when you switch the recording source to microphone, I would assume that you have plugged in a microphone into your x-fi notebook. You should check if there is a microphone control on your volume mixer and whether it is unmuted if there is one. There are many sound card which allows for the microphone audio to be heard on the speaker output if the microphone source is unmuted.
Message Edited by flipflop on 03-29-2009 09:03 [email protected]

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Problem with the volume keys on my keyboard.

Hey everybody,
I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers. Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing. If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!

First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
restart
to get it back:
mv ~/Desktop/com.apple.systempreferences.plist ~/Library/Preferences/
confirm with "y" if you are asked to replace this file.
marek

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Firefox has a problem with OS X

Hi, i noticed that firefox has a problem with OS X. i'm trying to backup my bookmarks (not as HTML) & it does'nt do nothing!. comparing to windows 7 - i can backup my bookmarks & right click on a bookmark from the bookmark menu & i can open/delete etc' a page. why i can't do that in OS X?? when i'm doing right click on a bookmark its taking me to the page insteade of opening the quick menu.. help please!

It is possible that anti-virus (security) software is corrupting downloaded files or is otherwise interfering with downloading files.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See:
*http://kb.mozillazine.org/Unable_to_save_or_download_files
*browser.download.manager.scanWhenDone

Face time fades out and then tries to reconnect on new ipad retina display on WiFi. Iphone 4s has no problem with face time from exact same location and same contact. WiFi signal strong on both devices. What gives?

Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?

rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.

See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

G4 mini has a problem with its volume structure

Similar Messages

Maybe you are looking for