Problem with change mode in program

Hi,
I have problem to chage the program from display mode to change mode. I tried to change the mode by clicking change icon(little pen indicator) and also i tried with menu path program->Dispaly<>change also. But i got message that The user kumar currently editing the program. But i have not opened any sessions ,No one has opened this program also. I am not able to understand why the message "The user kumar currently editing the program coming". SO how to solve this. Plz help me regarding this.
Regards,
Kumar

go to SM12 delete all the lock entries for your user name. then try changing your program.
Regards
Raja

Similar Messages

SSRS 2012, SQL Server 2012. Problem with changing database

Hi all!
I have a problem with changing database for SSRS.
I have a SSRS 2012 and SQL Server 2012. These programs is on WIndows Server 2012.
I need to link SSRS to the new database instance. For this I run SSRS Configeration Manager, open tab Database, click Change Database. Then I choose option "Choose an existing report server database", click Next, write the server name, test
connection (it's successed) and push Next again. Then I see this error message:
Error
The feature: "Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services.
OK
I'm confused, cause I have compatible versions of programs and THIS error.
Please, help me.
Thanks.

Hi Kirill,
From the error message, we can know that the issue may be caused by incorrect editions of SQL Server for report data sources are used as the Report Server Database.
When creating a report server database, please be aware that not all editions of SQL Server can be used to host the database. So we should make sure that we have used the correct database as the
Report Server Database. For more details, please refer to the “Report Server Database Server Edition Requirements” section in the following document:
http://technet.microsoft.com/en-us/library/cc645993.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Satellite P100-387: Problems with graphics mode swithing on new nVidia

*Looking for help!*
_I have recently installed nVidia drivers from toshiba site (84.00) and since than my system has severe problems with changing graphical modes when starting applications in pre-determined mode (such as 800x600)._
This problem affects my son mostly, as all older games are trying to run in 'Full screen mode' that fails to initialise properly.
Also I have noticed that in dxdiag the option about DirecrDraw settings shows that it is completely not supported by my graphic card acceleration.
Any ideas on how to resolve the problem desperately needed.
Relevant nformation:
Graphic card - nVidia GeForce GO 7600 driver: 6.14.0010.8400
System Memory - 3MB
O/S - Win XP Professional 5.1 build 2600
?:|

Have you installed the latest BIOS?
You could try reverting back to the original driver, it should be in C:\TOSAPINS. Or just Rollback the driver in Device Manager. Or revert back to a previous System Restore Point.

Problem with Append mode in File Receiver

Hello,
I am facing some problem with Append Mode in File Receiver.
In channel config, i have given :
Construction Mode : Append
File Type : Text
Message Protocol : File Content Conversion
The size of the file which i am trying to send is about 9.5MB.
I got this error,
"Recovering from loss of connection to database; message
loaded into queue by recover job: System Job (Failover Recovery)".
So, it would seem that there was a loss of connnection to the database
while the file was being written.
Note - XI successfully recovered from the connection loss and
successfully wrote the file, however since the communication channel
was set to append, it appended to the partial file that was written
before the database connection loss. This is not correct. The file
should have been overwritten after the recovery even though the communication
channel was configured to append.
Can anyone help me on this regard.
Thanks,
Soorya.

Hi Venkat,
I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
Memory Requirements are must 4 processing huge files:
Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
Plz do refer the following links:
U may plan the availability of ur communication channel using "Planning Availability Times" feature
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
hi check the below links for reference
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
Regards,
Vinod.

Having problem with change of name in the datagrid Coding

I am having problem with changing the name of the datagrid header text name for one of the data either in the flash file or the php file.
The thing is i want to change the Course_Name to Course Name that has no underscore so that it will look nicer in the datagrid but if I change it in the php file like SELECT Course_Name as 'Course Name' ....., it will not turn out in the datagrid when I CTRL ENTER the flash file but the others like Price,description and display is shown.
There is no problem with my php code but I do not know how to change the Course_Name into Course Name so please help me resolve this error that I am having.
This is my flash code
function goCourse(e : MouseEvent):void
gotoAndStop(5);
refreshResponder = new Responder (refreshSuccess, onFault);
connection = new NetConnection ();
connection.connect (gateway);
dataDG.addEventListener (Event.CHANGE, gridItemSelected);
refreshData (true);
function gridItemSelected (e: Event): void {
ID = e.target.selectedItem.ID;
courseTxt.text = e.target.selectedItem.Course_Name;
priceTxt.text = e.target.selectedItem.Price;
descTxt.text = e.target.selectedItem.Description;
private function getParams () {
var param: Object = new Object ();
param.ID = ID;
param.Course_Name = courseTxt.text;
param.Price = priceTxt.text;
param.Description = descTxt.text;
return param;
private function refreshData (refresh: Boolean): void {
if (refresh)
connection.call ("Course.viewCourse", refreshResponder);
private function refreshSuccess (result: Object): void {
dataDG.dataProvider = RecordSetDP.toDataProvider (result);
dataDG.columns = ["Course_Name","Price","Description","Display"];
private function onFault (fault: Object): void {
trace (String (fault.description));
This is my php file code.
function viewCourse()
$this->connect();
$sql = "SELECT Course_Name,Price,Description,Display
FROM coursetb";
return mysql_query($sql,$this->_connection);

i don't see where you're calling your php file in your code, but change 'Course Name' to 'Course_Name' (or vice-versa) there.

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Problem with Fullscreen mode

Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.

Hi There
By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
Hope this helps
J.C

Problem with passive mode FTP server and NAT

Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)

Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

HT2020 if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.

HT1918 problem with changing the payment information

I've got a problem with changing the payment information !!
when I change them and I followed the instruction , and when I click done
it says " for assistance, contact iTunes support at " the link " . and nothing
change , so what should I do ?

Hi Bart,
The description of the field VBKD-BSTKD will appear in sales order (VA01/02/03) Header Order data tab.
If you notice the text for below one it is PO Number where Number starts with upper-case N and it iis not the one which you changed.
Also this is a hyperlink to sales header order data screen.
You need to enhance the code via sales exit to fix this.

I have a little problem with input in my program...(System.in, BufferedRead

I'm coding a program that takes a input like this :
Sample Input
1 11 5
2 6 7
3 13 9
12 7 16
14 3 25
19 18 22
23 13 29
24 4 28
So I wrote a code like this :
public static void main(String[] args) throws Exception{
          BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
          String input = null;
               while((input = br.readLine()) != null) {
               StringTokenizer st = new StringTokenizer(input);
               int leftX = Integer.parseInt(st.nextToken());
               int height = Integer.parseInt(st .nextToken());
               int rightX = Integer.parseInt(st.nextToken());
.... rest of the code....
But unlike I expected, the program did not pass the while loop.
When I observed in debugging mode, when "br.readLine()" has no more strings to read,
the whole program just becomes idle doing nothing, and it does not proceed further.
Is there any problem with my code there? I've been trying to figure it out for hours... Please help!!!

myunghajang wrote:
Why doesn't it work in a way I intended? BufferedReader returns null if there is no more string to read, and what's the problem?
It's so frustrating...The computer doesn't have a mind reading input, how is your program supposed to know you have finished typing the input?
If you put the data in a file and redirect it into your program on the command line it will work (because the file knows where its end is)
Your program could instead assume that a blank line is you end of input.

Problem with append mode in WS_DOWNLOAD

Hi everybody
I have a problem with downloading two internal tables in one excel sheet.
I am Using FM - WS_DOWNLOAD , MODE = 'A' .
I want to append one IT after another .
But I am getting only the second one ...
MODE - A is for append , correct?
Any clou?
I allready sow all the posts on the forum

hi
good
go through this and use accordingly.
Often we face situations where we need to download internal table contents onto an Excel sheet. We are familiar with the function module WS_DOWNLOAD. Though this function module downloads the contents onto the Excel sheet, there cannot be any column headings or we cannot differentiate the primary keys just by seeing the Excel sheet.
For this purpose, we can use the function module XXL_FULL_API. The Excel sheet which is generated by this function module contains the column headings and the key columns are highlighted with a different color. Other options that are available with this function module are we can swap two columns or supress a field from displaying on the Excel sheet. The simple code for the usage of this function module is given below.
Program code :
REPORT Excel.
TABLES:
sflight.
header data................................
DATA :
header1 LIKE gxxlt_p-text VALUE 'Suresh',
header2 LIKE gxxlt_p-text VALUE 'Excel sheet'.
Internal table for holding the SFLIGHT data
DATA BEGIN OF t_sflight OCCURS 0.
        INCLUDE STRUCTURE sflight.
DATA END   OF t_sflight.
Internal table for holding the horizontal key.
DATA BEGIN OF t_hkey OCCURS 0.
        INCLUDE STRUCTURE gxxlt_h.
DATA END   OF t_hkey .
Internal table for holding the vertical key.
DATA BEGIN OF t_vkey OCCURS 0.
        INCLUDE STRUCTURE gxxlt_v.
DATA END   OF t_vkey .
Internal table for holding the online text....
DATA BEGIN OF t_online OCCURS 0.
        INCLUDE STRUCTURE gxxlt_o.
DATA END   OF t_online.
Internal table to hold print text.............
DATA BEGIN OF t_print OCCURS 0.
        INCLUDE STRUCTURE gxxlt_p.
DATA END   OF t_print.
Internal table to hold SEMA data..............
DATA BEGIN OF t_sema OCCURS 0.
        INCLUDE STRUCTURE gxxlt_s.
DATA END   OF t_sema.
Retreiving data from sflight.
SELECT * FROM sflight
         INTO TABLE t_sflight.
Text which will be displayed online is declared here....
t_online-line_no    = '1'.
t_online-info_name = 'Created by'.
t_online-info_value = 'SURESH KUMAR PARVATHANENI'.
APPEND t_online.
Text which will be printed out..........................
t_print-hf     = 'H'.
t_print-lcr    = 'L'.
t_print-line_no = '1'.
t_print-text   = 'This is the header'.
APPEND t_print.
t_print-hf     = 'F'.
t_print-lcr    = 'C'.
t_print-line_no = '1'.
t_print-text   = 'This is the footer'.
APPEND t_print.
Defining the vertical key columns.......
t_vkey-col_no   = '1'.
t_vkey-col_name = 'MANDT'.
APPEND t_vkey.
t_vkey-col_no   = '2'.
t_vkey-col_name = 'CARRID'.
APPEND t_vkey.
t_vkey-col_no   = '3'.
t_vkey-col_name = 'CONNID'.
APPEND t_vkey.
t_vkey-col_no   = '4'.
t_vkey-col_name = 'FLDATE'.
APPEND t_vkey.
Header text for the data columns................
t_hkey-row_no = '1'.
t_hkey-col_no = 1.
t_hkey-col_name = 'PRICE'.
APPEND t_hkey.
t_hkey-col_no = 2.
t_hkey-col_name = 'CURRENCY'.
APPEND t_hkey.
t_hkey-col_no = 3.
t_hkey-col_name = 'PLANETYPE'.
APPEND t_hkey.
t_hkey-col_no = 4.
t_hkey-col_name = 'SEATSMAX'.
APPEND t_hkey.
t_hkey-col_no = 5.
t_hkey-col_name = 'SEATSOCC'.
APPEND t_hkey.
t_hkey-col_no = 6.
t_hkey-col_name = 'PAYMENTSUM'.
APPEND t_hkey.
populating the SEMA data..........................
t_sema-col_no = 1.
t_sema-col_typ = 'STR'.
t_sema-col_ops = 'DFT'.
APPEND t_sema.
t_sema-col_no = 2.
APPEND t_sema.
t_sema-col_no = 3.
APPEND t_sema.
t_sema-col_no = 4.
APPEND t_sema.
t_sema-col_no = 5.
APPEND t_sema.
t_sema-col_no = 6.
APPEND t_sema.
t_sema-col_no = 7.
APPEND t_sema.
t_sema-col_no = 8.
APPEND t_sema.
t_sema-col_no = 9.
APPEND t_sema.
t_sema-col_no = 10.
t_sema-col_typ = 'NUM'.
t_sema-col_ops = 'ADD'.
APPEND t_sema.
CALL FUNCTION 'XXL_FULL_API'
EXPORTING
DATA_ENDING_AT          = 54
DATA_STARTING_AT        = 5
   filename                = 'TESTFILE'
   header_1                = header1
   header_2                = header2
   no_dialog               = 'X'
   no_start                = ' '
    n_att_cols              = 6
    n_hrz_keys              = 1
    n_vrt_keys              = 4
   sema_type               = 'X'
SO_TITLE                = ' '
TABLES
    data                    = t_sflight
    hkey                    = t_hkey
    online_text             = t_online
    print_text              = t_print
    sema                    = t_sema
    vkey                    = t_vkey
EXCEPTIONS
   cancelled_by_user       = 1
   data_too_big            = 2
   dim_mismatch_data       = 3
   dim_mismatch_sema       = 4
   dim_mismatch_vkey       = 5
   error_in_hkey           = 6
   error_in_sema           = 7
   file_open_error         = 8
   file_write_error        = 9
   inv_data_range          = 10
   inv_winsys              = 11
   inv_xxl                 = 12
   OTHERS                  = 13
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
thanks
mrutyun^

When Place Image in Photoshop, error msg: 'Problem with Photoshop CS6 caused program to stop working

When I 'Place Image' in Photoshop, the following error msg comes up: 'A Problem with Photoshop CS6 has caused the program to stop working, close programme?'
Do I need to adjust my set-up to run this? The PC operates on a 32-bit system/Windows 6.

You need to provide much more info: What files are you trying to place into what document? What are the document sizes, resolution, color mode etc.? Anything else we should know about? This could be a million things from color profile issues to color space mismatches to the files to be placed being damaged or badly structured or a importer module being broken. Also provide exact system info and crash logs:
Working with your Operating System’s Tools
Mylenium

I can't see a message from my union because of problems with changed adress for pop-upwindows and some other issue

Hi,
I'm from Sweden and I'm having problems with a website my union has. I have been able to see messages from them before but they've changed their adress and on the site they tell people they have to put the new adress on the approved list for pop-up windows. I have done so but it's still not working. Maybe I've done it wrong, I don't know but it's annoying as hell that I can't see the messages they send.
I really need help with this.
Best regards,
Lena

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Problem with RFC connection - tp program not registered

Hello everyone
recently there has appeared a problem with the RFC connection on our system - we received the following set of messages:
Trace file opened at 20101221 130738 Central European Standard Time, SAP-RE
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Tp program is not registered.
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: xxx(Client: 100)
Destination: SIDRFC_IFSAPHRCZPKCP (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Program transakcji nie jest zarejestrowany
DEST =SIDRFC_IFSAPHRCZPKCP
HOST =%%RFCSERVER%%
PROG =IFCZPKCP
GWHOST =ssapprod
GWSERV =sapgw21
I tried to register program with a command:
rfcexec -aIFCZPKCP -gssapprod -xsapgw21
but with no success - the program didn't appear on the list of logged clients on the system in gateway monitor. Frankly speaking we do not know now what else we can do - please help!
We have ECC 6.0 (SAP_BASIS 700 SP18) on Windows Server 2003 R2 x64.
Thanks in advance for any help.
Regards
Peter

Hi Salim
thanks for your reply.
./rfcexec -a(PROG_ID) -gssapprod -xsapgw21 &
The syntax you're providing refers to UNIX systems, but I did similar thing on our Windows system - I tried all of the following methods (unfortunatelly without success):
rfcexec -a(PROG_ID) -gssapprod -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod -xsapgw21
rfcexec -a(PROG_ID) -gssapprod.domain -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod.domain -xsapgw21
Can you advise me what to do now?
Thanks
Piotr

Problem with change mode in program

Similar Messages

Maybe you are looking for