Problem with CM after upgrading from 4.0.19 - 4.1.1

I upgraded my Edge-WAE and Core-WAE from 4.0.19 to 4.1.1 and it was successful
However, after upgrading the CM, I got the message "service temporarily unavailable" when access the web page.
The console showed: "Stopping the service 'cms_cdm' because it is restarting too often."
When I quried the CMS service, I got:
CMS services information :
Service cms_httpd is running
Service cms_cdm is not running
What may be the problem?

I had the same problem and opened a TAC case. It seems that others are reporting the same trouble when using the CM GUI to upgrade the CM. For some reason it doesn't back up the database correctly and it gets corrupted, causing the cms_cdm to crash and then shut down.
I was told to roll back to 4.0.19, de-register all the non-CM devices using a forced de-register, then from the CM CLI, ftp the new 4.1.1 image over, reload, and re-register all the devices.
Luckily my setup was in the lab and not production. There may be a better/another way to do it, but that's the way I got it done.

Similar Messages

  • Time-out problems with RV320 (after upgrade from RV042)

    config:
    dual wan
    WAN1: 4G router (DHCP) - approx 25Mbit/ 8Mbit
    WAN2: PPOE (DSL) - 1 Mbit/ 0.2 Mbit
    worked with a RV042 before and upgraded to a RV320 now.
    all other things are unchanged.
    3 problems - 2 solved/ not critical - one still open:
    a) not critical:  DHCP Status does not include all devices (changing view - but all-time problem)
    I would suspect a software bug.... DHCP itself works perfectly/ IPs are assigned (just not shown in status)
    b) solved (at least for now):  internet connection featured time-outs; after many tries, disabling the SPI in the firewall helped
    btw: this only happend for the WAN1 - WAN2 worked  (or is that slow that the additonal wait time did not matter ;-)
    c) very annoying: exchange connection (from Outlook client to external exchange) still has time-outs (mostly the whole mail client hangs/ ends to be restarted).
    As soon as I disable WAN1, it works!  But it´s not the LTE WAN itself - switching back to the RV042 does not show the same symptom.
    I tried: include IP into local DNS (in general I work with google DNS servers - but changing that does not help either), opening all traffic for teh realevant IPs and disabling the firewall completely.  no positive results....
    thanks for any hints....

    I agree with you on a, probably a bug of some sort.
    b is an issue I've seen before, and even on similar bandwidth (25/5) on my rv016.  What was able to figure out is that the carrier (ISP) is sending about 4k/sec of ICMP packets to the router, which in turn makes the router think it's under attack so it drops the connection.  As you can tell, disabling the SPI helps.  For me, putting another router in front of my rv016 (on 2 of 3 wans) was my only 'permanent' solution.
    c sounds like there's a protocol binding/static route in the rv042 that you need to add to the rv320.  I'd check that first.
    Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

  • Problems with Aperture after upgrading from Tiger to Snow Leopard

    Help!  I recently upgraded my IMac operating system from Tiger to Snow Leopard.  Now, I am finding my aperture is not responding the way it used to.  I cannot change the border dimensions; I can't print.  Any suggestions would be appreciated.  I was told by Apple Technical Support that they will not provide support for Aperture 2 and that I would have to upgrade to Aperture 3.  Is this correct? 

    This is called a Kernel panic.
    See here for possible solutions:
    http://support.apple.com/kb/TS3742
    Did you do anything else apart from ungrading OS?
    Did you add memory?
    Bad or not well seated memory modules are often a cause of kernel panic

  • I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    It would always be easier to fix the Mail problems.

  • Problems with 8310 after upgrading to V4.5

    Alright I will start with my phone it has locked up and my alarm  doesnt work all the time. I have taken the battery out and restarted it, this sometimes works but then it is back to not working again. My husbands phone is much worse it crackles real bad then it turns off. We werent having any problems with these phones until we did the upgrade. Is there someway to fix it?
    Thanks
    Jenn

    Sorry Made mistake.... Disregard first post
    TRY THIS
    Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
    Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
    checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
    Anyhow...called apple care ...EZ fix
    Quit mail if yer on.
    Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
    Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
    If yer POP settings r right this should work
    It did fer me!!!
    Good luck
    Message was edited by: soboo
    Message was edited by: soboo

  • Problems with Mail after upgrading to 10.5.6

    I was using my mail program without problems, until I upgraded to v 10.5.6 - when I tried to 'get new mail' I received the following message:
    There may be a problem with the mail server or network. Check the settings for the account or try again.
    The server error encountered was: The connection to the server on port 110 timed out.
    I contacted my email provider (shaw.ca) and there are no problems with their server. So, I added another email account to check if it was the program, and I'm getting the same response with the new account I added.
    Has anyone come across this issue? Any advice? Thank you!!

    Sorry Made mistake.... Disregard first post
    TRY THIS
    Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
    Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
    checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
    Anyhow...called apple care ...EZ fix
    Quit mail if yer on.
    Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
    Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
    If yer POP settings r right this should work
    It did fer me!!!
    Good luck
    Message was edited by: soboo
    Message was edited by: soboo

  • Problems with office after upgrade to ERP 6.0

    After upgrade from R3 46c to ERP 6.0 , we installed sap gui 710 with patch 14 and in many frontends a new version of Microsoft Office 2003 SP3.
    In many PCs now we have a problem with macros and templates from PA20 transacction with Documents Management.
    We try to execute a Wor for a personnel number with infotype 910 and I have the nex messages when Windows open the Word 2003.
    "Al abrir este domento, se ejecutará el comando SQL siguiente:
    SELECT * FROM C:/DOCUMEN1andreaCONFIG1TempDatasource_tab.SAP
    Los datos de la base de datos se colocarán en el documento. ¿Desea continuar?"
    If you select "Si", appear another message ~SAP(BA6580C1-BE84.... es un documento principal de combinación. Word no puede encontrar el origen de datos"
    When, word document is dsplayed, we only see name of variable and they are not reeplaced by its value.

    Sorry, but the note is in Spain (I guess), can you please translate?
    We have the same issue on our productive HR system - but not on the development system, what makes it curious.
    When we try to start contracts in word we get the same message
    "Opening this will run the following SQL command
    SELECT * FROM C:\.....Datasource_tab.SAP
    How can we avoid this message?
    Thanks in advance!

  • Problem with setMnemonic after upgrading to 1.4.2

    Hi,
    setMnemonic doesnt seem to work properly for JButtons after upgrading from 1.3.1 to 1.4.1. Hot Key works but underlining doesnt show.
    In our app, we have our own controls which are basically derived from Swing controls. In this case JButton.
    I have tried using both setMnemonic API (char as well as int) but no luck. Look and feel we use is Windows look and feel (W2K). Font is Dialog. One thing I have noticed is that if I donot set the look and feel in my app. It seems to work fine. (Metalic).
    Anybody has any clue on how to fix this issue ?
    Thanks in advance
    Sohan

    Hi,
    Here is a code sample for the above problem.
    import java.awt.*;
    import javax.swing.*;
    public class TestFrame {
              public static void main(String[] args) {
                        JButton button = new JButton();
                        JFrame frame = new JFrame();
                        // Add button to the frame
                        //frame.getContentPane().setLayout(new GridBagLayout());
                        //frame.getContentPane().add(button, new GridBagConstraints(3,2,1,1,1.0,1.0,GridBagConstraints.SOUTHEAST,GridBagConstraints.NONE,new Insets (0,0,0,0),0,0));
                        frame.getContentPane().add(button, BorderLayout.NORTH);
                        // Set initial size
                        int frameWidth = 300;
                        int frameHeight = 300;
                        frame.setSize(frameWidth, frameHeight);
                        button.setText ("Button");
                        button.setMnemonic((int)'o' );
                        button.setMargin(new Insets (0,0,0,0));
                        button.setSize (new Dimension (73,21));
                        button.setFont(new Font ("Dialog", Font.PLAIN, 11));
                   try {
                        UIManager.setLookAndFeel ("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
                        SwingUtilities.updateComponentTreeUI(frame);
                   catch (Exception e){};
                        // Show the frame
                        frame.pack();
                        frame.setVisible(true);
    Sohan

  • Problems with updates after upgrading to CS4

    I am experiencing update problems after upgrading from CS3 to CS4.
    After completing the upgrade, I opened CS4 and then clicked on 'Help' and 'Updates'. The download was 280MB of updates, which duly started to install. However, during the install process, I received the 'installation incomplete' pop-up box and could only continue by clicking on the  ‘Cancel the current update and continue installing…….’ option. At the end, I  shut the machine down.
    This morning I have  run the CS4 updates again, this time downloading 80MB (I guess the bits that it  didn’t do last night). When installing, the same 'installation incomplete' popped up three  times.
    Any help would be much appreciated.
    Many thanks

    OS?
    Are you seeing which componenets are not successful? If no message in the progress window about what is being installed, there is probably a log.
    Have you tried going to the website to download the update installer?

  • Problems with Mail after upgrading to 10.9.1

    I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
    Problems I have encountered so far are:
    - I don't receive some e-mails on my Gmail account.
    - I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
    Has anyone encountered the same problems and found a solution?
    Thanks in advance!

    Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
    It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
    Strange thing is I receive mail OK, just cant send.

  • Problems with SAML after Upgrade

    Hi Guys,
    i'm stuck.
    After upgrading from SP6 to SP10 in our NW7.01 System we get following error:
    The SAML artifact receiver servlet cannot perform redirection to target
    Before the update it was working fine. did anything change from SP6 to 10? can i go 'back'.
    I could undeploy tc/sec/saml/service - but is this a good idea?
    In which paket was tc/sec/saml/service? Should I undeploy the whole package?
    Thanks for help
    André

    Hi Guys,
    i'm stuck.
    After upgrading from SP6 to SP10 in our NW7.01 System we get following error:
    The SAML artifact receiver servlet cannot perform redirection to target
    Before the update it was working fine. did anything change from SP6 to 10? can i go 'back'.
    I could undeploy tc/sec/saml/service - but is this a good idea?
    In which paket was tc/sec/saml/service? Should I undeploy the whole package?
    Thanks for help
    André

  • Problems with charts after upgrading APEX from 3.2 to 4.1

    After upgrading apex from 3.2 to 4.1 the combination stacked bar/Stepline charts no longer works. Any help would be appreciated.
    Thanks.

    Hi "904055",
    I believe the reason your chart is no longer working is because you are attempting to generate a chart type that is not covered by our AnyChart Flash charts license i.e. Stepline charts are not one of our support chart types. We only support the chart types exposed via the Application Express UI i.e. the chart types listed in the Create wizards. If you wish to create other AnyChart chart types, you will need to contact AnyChart directly, in order to obtain a separate license and swf file.
    If you believe that your chart is only using chart types covered by our license, but are still experiencing issues, then please place a testcase on apex.oracle.com, post some login credentials, and I'd be happy to take a look.
    Regards,
    Hilary

  • [SOLVED] Problem with murmur after upgrading to 1.2.3-4

    I've been running Murmur on my server for a long time without problems. The last version I had running was 1.2.3-3. After upgrading to 1.2.3-4, the already-running murmurd process crashed after a while (some hours after the upgrade, after constant use) and I'm unable to restart it. The message I get is:
    :: Starting murmur [BUSY]
    <W>2012-01-07 22:06:11.133 Initializing settings from /etc/murmur.ini (basepath /etc)
    <W>2012-01-07 22:06:11.134 OpenSSL: OpenSSL 1.0.0f 4 Jan 2012
    <W>2012-01-07 22:06:11.134 SSL: Adding recommended CA StartCom Certification Authority
    <W>2012-01-07 22:06:11.134 SSL: Adding recommended CA AAA Certificate Services
    <W>2012-01-07 22:06:11.135 SSL: Adding recommended CA UTN-USERFirst-Client Authentication and Email
    <C>2012-01-07 22:06:11.135 Successfully switched to uid 1007
    <F>2012-01-07 22:06:11.230 ServerDB: Failed initialization: unable to open database file Error opening database
    [DONE]
    and in murmur.log nothing gets written. Downgrading to 1.2.3-3 works, but I thought I'd look for the cause of the problem.
    After poking around a bit, I noticed that my murmur database (/var/lib/murmur/murmur.sqlite) belongs to a nonexistent user with a UID of 86 and a GID of 86, as well as the whole /var/log/murmur/ directory. I also noticed that a new murmur user and group with UID and GID of 1007 and 1000 exists on the system now. It seems that running:
    sudo chown -R murmur:murmur /var/lib/murmur/ /var/log/murmur/
    fixes the problem. Perhaps the update deleted my pre-existing murmur user and group and recreated them?
    Edit: Guess I should mark this as [SOLVED].
    Edit edit:
    Also turns out the whole /var/lib/murmur/ directory has to belong to murmur, not just the sqlite file.
    Last edited by n17ikh (2012-01-08 03:22:39)

    I had the same problem and fixed it like you.

  • Wifi problem with Mac after upgrade to Mavericks

    I just upgraded to Mavericks but something wrong with my wifi.
    i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
    i tried connect to hotspot with my iphone5s and it works.
    Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
    In conclusion,
    Airport should be fine because my other devices works.
    Mac wifi should be fine too because i can connect using hotspot.
    so why it's not working when i connect Mac to Airport?

    I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
    I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila!  It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
    I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
    I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
    Good luck.

  • Problem with mail after upgrading to tiger...

    When I upgraded the OS in my PowerBook, all the mail messages in my in-box disappeared. Now, the only thing that shows up in each mail is the following, "The message from [Antonio john Doe <[email protected]>] concerning “Stuff” has not been downloaded from the server. You need to take this account online in order to download it."
    The e-mail is also gone from the earthlink
    server because they wipe all mail out after a few days. Is there a
    way to recover the messages?
    Powermac G5 dual 1.8   Mac OS X (10.4.6)   1.3 Gb ram

    The conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
    Help! "You need to take this account online in order to download it."
    More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
    1. Quit Mail if it’s running.
    2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
    3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
    4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
    5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
    6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
    7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
    The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
    8. Open Mail.
    9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
    10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
    As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful for that.
    Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
    If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
    You may want to take a look at the following article (also referenced in the thread I mentioned at the beginning of this post) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
    Overstuffed mailbox is unexpectedly empty
    Ask for any clarifications or if you need further assistance.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

Maybe you are looking for