Problem with Commerce Server3.5
I installed Commerce Server3.5 with SP2.
It is giving me license error. Its an evaluation version. Can any one let me know
the reason??
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
Similar Messages
-
Problems with pricing in Internet Order screen(CRM E-Commerce 5.0)
Good afternoon !
We are using CRM 5.0 with CRM E-Commerce 5.0, and we are experiencing problems with pricing in the order screen.
When we create an order and insert one item at this order, this item is processed and the price is calculated and shown correctly, both in the item and in the table of totals at the right corner(where is the Total Net Price, freight value, etc).
If we change the quantity of this item, or insert more one item(with the same or other product), the price turns to zero, both in the item(s) and in the table of totals mentioned above. Also, in the table of totals, the freight value remains being calculated, even in this cases when the prices is turned to zero.
What can be happening in this case ? What can I check to determine the cause and solve this problem ?
Thank you in advance !
WilsonGood afternoon !
This problem was solved adjusting some parameters of partner determination. -
Error while starting Commerce Server3.2 with WL5.1 SP6 on solaris
Hi
I am getting following error while trying to start the commerce
server thro' start script provided for Solaris. Could anyone help
me?
Exception in thread "main" java.security.AccessControlException:
access denied (
java.lang.RuntimePermission createSecurityManager)
at java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java:272)
at java.security.AccessController.checkPermission(AccessController.java:
399)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:545)
at java.lang.SecurityManager.<init>(SecurityManager.java:301)
at weblogic.boot.ServerSecurityManager.<init>(ServerSecurityManager.java
:11)
at weblogic.Server.main(Server.java:59)
at weblogic.Server.main(Server.java:55)
thanxShashi,
Tuxedo 6.5 needs a patch to run on later versions of Solaris or else the WSNAT_CAT:1008 or JOLT_CAT:1008 "Error: Could not establish listening address on network +netaddr+" message can occur.
The thread Could not establish listening address on network describes a similar problem with the WSL, and the ULOG in that thread also indicates "TUXEDO Version 6.5 SunOS 5.5.1".
Please obtain the latest rolling patch from Oracle support. (It would be even better to upgrade to a later release of Tuxedo, since Tuxedo 6.5 is past its end of life date on Solaris. Hopefully whatever compilation problems you are having with later Tuxedo releases can be resolved fairly easily.)
Regards,
Ed -
Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome
Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
#slideshow {
padding: 10px;
margin:0;
#slideshow-caption{
padding:0;
margin:0;
#slideshow img, #slideshow div {
padding: 10px;
background-color: #EEE;
margin: 0;
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background: #004B8D;
margin: 0;
padding: 0;
color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
/* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
position:relative;
left:-90px;
width:950px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
z-index:1000;
.slide{
position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color: #42413C;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #6E6C64;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
width: 960px;
min-height:900px;
padding:5px 0px 0px 0px;
background: #E8F8FF;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
background: #E8F8FF;
padding:10px 5px 0px 5px;
.sidebar1 {
float: left;
width: 225px;
margin: 60px;
color: #FFFF0D;
background: #595FFF;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
padding: 5px 5px 0px 5px;
border: 3px solid #F7F723;
z-index:-1;
.sidebar2 {
float: left;
width: 275px;
color: #FFFF0D;
text-align: left;
background: #595FFF;
padding-bottom: 10px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
border: 3px solid #F7F723;
z-index:2;
.sidebar3 {
float: left;
width: 275px;
color: #FFFF0D;
text-align: left;
background: #595FFF;
padding-bottom: 10px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
border: 3px solid #F7F723;
z-index:3;
.content {
padding: 0px 0px 0px 0px;
width: 780px;
float: left;
background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
list-style: none; /* this removes the list marker */
border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
margin-bottom: 50px; /* this creates the space between the navigation on the content below */
font: Arial Black, Verdana, , Helvetica, sans-serif;
font-size:1.3em;
font-weight:bold;
z-index:2;
ul.nav li {
border-bottom: 0px solid #FFFF66; /* this creates the button separation */
font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
padding: 3px 0px 5px 0px;
display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
text-decoration: none;
color: #FFFF0D;
background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
background: #595FFF;
font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
padding: 10px 0;
background: #595FFF;
color: #FFFF0D;
position: relative;/* this gives IE6 hasLayout to properly clear */
clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header"><!-- end .header -->
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
<ul class="nav">
<li><a href="about.html">About Us</a></li>
<li><a href="history.html">Reardan History</a></li>
<li><a href="activities.html">Activities</a></li>
<li><a href="business.html">Business<br />
Directory</a></li>
<li><a href="about.html">Join the<br />
Chamber</a></li>
<li><a href="links.html">Links<br />
<span style="font-size: 85%">Tourism</span><br />
</a></li>
</ul>
<!-- end .sidebar1 --></div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
after: slideshowOnCycleAfter, //the function that is triggered after each transition
autostop: false, // true to end slideshow after X transitions (where X == slide count)
fx: 'blindX',// name of transition effect
pause: false, // true to enable pause on hover
randomizeEffects: true, // valid when multiple effects are used; true to make the effect sequence random
speed: 100, // speed of the transition (any valid fx speed value)
sync: true, // true if in/out transitions should occur simultaneously
timeout: 5000, // milliseconds between slide transitions (0 to disable auto advance)
fit: true,
height: '300px',
width: '525px' // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
if (slideshowAddCaption==true){
$('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
<!--All elements inside this will become slides-->
<img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
<div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
<img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>
<!--It is safe to delete this if captions are disabled-->
<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
<br />
<br />
<br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center"> <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
<br />
<br />
<br />
<br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
<p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
<span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
</p>
<!-- end .footer -->
</div></body>
</html>If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
float: left;
width: 225px;
margin: 60px 0px 60px 60px;
color: #FFFF0D;
background: #595FFF;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
padding: 5px 5px 0px 5px;
border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px; -
Oracle 8.1.7 driver limit causes problems with CMP
The information below is from Oracle's site and has been noted by a few
people on various message groups. We had upgraded to 8.1.7 but hadn't put
the latest classes12.zip (June 2001) in our classpath. When we do, we get
the following error from the driver/generated code. We believe this is
because we are hitting the limit cited below. I don't know why the Oracle
driver has this limit, but since WL generates this code for the EB, I don't
see an easy way for us to avoid it.
Anyone have any comments on this? Is my interpretation of the stacktrace
correct? If we go back to the old classes12.zip (June 2000) then we don't
have this problem. But in addition to wanting to run the matching zip file
with the version of the DB, we also want to use some of the functionality in
the 8.1.7 zip. Does BEA have a workaround for CMP?
java.rmi.UnexpectedException: Unexpected exception in
sync.server.system.SystemSessionDataBean.setSessionData():
java.sql.SQLException: ORA-01483: invalid length for DATE or NUMBER bind
variable
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:169)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:822)
at
oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1610
at
oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1535)
at
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java
:2053)
at
oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedState
ment.java:398)
at
weblogic.jdbc20.pool.PreparedStatement.executeUpdate(PreparedStatement.java:
47)
at
sync.server.system.SystemSessionDataPSWebLogic_CMP_RDBMS.update(SystemSessio
nDataPSWebLogic_CMP_RDBMS.java:318)
at
sync.server.system.SystemSessionDataPSWebLogic_CMP_RDBMS.store(SystemSession
DataPSWebLogic_CMP_RDBMS.java:284)
at weblogic.ejb.internal.EntityEJBContext.store(EntityEJBContext.java:192)
at
weblogic.ejb.internal.EntityEJBContext.beforeCompletion(EntityEJBContext.jav
a:227)
at
weblogic.ejb.internal.StatefulEJBObject.postInvokeNoTx(StatefulEJBObject.jav
a:355)
at weblogic.ejb.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:865)
Using Streams to Avoid Limits on setBytes() and setString()
There is a limit on the maximum size of the array which can be bound using
the PreparedStatement class setBytes() method, and on the size of the string
which can be bound using the setString() method.
Above the limits, which depend on the version of the server you use, you
should use setBinaryStream() or setCharacterStream() instead.
When connecting to an Oracle8 database, the limit for setBytes() is 2000
bytes (the maximum size of a RAW in Oracle8) and the limit for setString()
is 4000 bytes (the maximum size of a VARCHAR2 in Oracle8).
When connecting to an Oracle7 database, the limit for setBytes() is 255
bytes (the maximum size of a RAW in Oracle7) and the limit for setString()
is 2000 bytes (the maximum size of a VARCHAR2 in Oracle7).
The 8.1.6 Oracle JDBC drivers may not raise an error if you exceed the limit
when using setBytes() or setString(), but you may receive the following
error:
ORA-17070: Data size bigger than max size for this type
Future versions of the Oracle drivers will raise an error if the length
exceeds these limits.Joe Herbers wrote:
>
I added some debug output to verify that this problem is definitely caused
by the WL generated code/Oracle driver. To do this, I used
the -keepgenerated code on ejbc. Then I modified the generated code to
print the length of the byte array before calling setBytes. I compiled the
class and put an updated version in my bean jar.
When I run our test suite, I see hundreds of calls to setBytes with sizes
such as 315, 368, 1988, 2020. And then occasionally there are sizes of
41932 or 19409. These larger sizes are always followed by the ORA-01483
exceptions.
This appears to be certain confirmation that the problem is caused by the
8.1.7 driver's enforcement of the 4k limit on the methods that the
WL-generated code is using to map our Java byte[] to our Long Raw/BLOB field
in Oracle. Any suggestions for workarounds?Actually, it indicates the driver's being caught by the limitation that
Oracle itself imposes with setBytes(). This is a known issue I believe, and
you should ask support for a patch to ejbc that generates calls to setBinaryStream()
rather than setBytes().
Joe Weinstein
>
"Joe Herbers" <[email protected]> wrote in message
news:[email protected]...
We use WL 5.1, SP10. I've noticed that sp11 is now out, but it doesn'tseem
to have any fixes for this problem (it mentions Oracle 8.1.6, but not8.1.7,
which seems to be the release in which Oracle started enforcing thislimit).
We're kind of stuck at the moment, I'm surprised no one else hasencountered
this problem with WebLogic (I have seen postings elsewhere about it with
other AppServers)
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]...
Hi Joe,
From your CMP DD it's clear that you use WL 5.1. Which service pack
do you use?
AFAIR this problem was fixed in WL 6.1, though I'm not sure about
5.1. Could you use ejbc with -keepgenerated option and look at
SystemSessionDataPSWebLogic_CMP_RDBMS.java, particularly
how bind variable related to you LONG RAW? Is setBytes used? Or
it's something like setBinaryStream?
Regards,
Slava Imeshev
"Joe Herbers" <[email protected]> wrote in message
news:[email protected]...
The table has only three fields: two IDs (Number(18)) and a Long Raw
that
we
are storing a Hashtable in. The field seems to be filled fine most of
the
time. With the old driver, it always works. As soon as we switch thenew
driver in, certain operations fail consistently. I haven't verifiedthat
the size is indeed > 4k in these cases, but our error matches whatothers
have seen. Here's the CMP DD but I doubt that helps...
<weblogic-rdbms-bean>
<pool-name>oracle</pool-name>
<table-name>scc_sm_sys_sess_data</table-name>
<attribute-map>
<object-link>
<bean-field>mlSystemSessionDataID</bean-field>
<dbms-column>sys_sess_data_id</dbms-column>
</object-link>
<object-link>
<bean-field>mlSystemSessionID</bean-field>
<dbms-column>sys_sess_id</dbms-column>
</object-link>
<object-link>
<bean-field>mBSessionData</bean-field>
<dbms-column>sys_sess_data</dbms-column>
</object-link>
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]...
Hi Joe,
This limit defines limit written to oracle strings, raws, blobs and
clobs
when setBytes is used. It has nothing to do with the exception
you're
getting.
Could you show us your CMP deployment descriptor(s)?
Regards,
Slava Imeshev
"Joe Herbers" <[email protected]> wrote in message
news:[email protected]...
The information below is from Oracle's site and has been noted by
a
few
people on various message groups. We had upgraded to 8.1.7 but
hadn't
put
the latest classes12.zip (June 2001) in our classpath. When we
do,
we
get
the following error from the driver/generated code. We believe th
is
is
because we are hitting the limit cited below. I don't know why
the
Oracle
driver has this limit, but since WL generates this code for the
EB,
I
don't
see an easy way for us to avoid it.
Anyone have any comments on this? Is my interpretation of the
stacktrace
correct? If we go back to the old classes12.zip (June 2000) then
we
don't
have this problem. But in addition to wanting to run the matching
zip
file
with the version of the DB, we also want to use some of the
functionality
in
the 8.1.7 zip. Does BEA have a workaround for CMP?
java.rmi.UnexpectedException: Unexpected exception in
sync.server.system.SystemSessionDataBean.setSessionData():
java.sql.SQLException: ORA-01483: invalid length for DATE or
NUMBER
bind
variable
at
oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:169)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
atoracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:822)
at
oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1610
at
oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1535)
at
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java
:2053)
at
oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedState
ment.java:398)
at
weblogic.jdbc20.pool.PreparedStatement.executeUpdate(PreparedStatement.java:
47)
at
sync.server.system.SystemSessionDataPSWebLogic_CMP_RDBMS.update(SystemSessio
nDataPSWebLogic_CMP_RDBMS.java:318)
at
sync.server.system.SystemSessionDataPSWebLogic_CMP_RDBMS.store(SystemSession
DataPSWebLogic_CMP_RDBMS.java:284)
atweblogic.ejb.internal.EntityEJBContext.store(EntityEJBContext.java:192)
at
weblogic.ejb.internal.EntityEJBContext.beforeCompletion(EntityEJBContext.jav
a:227)
at
weblogic.ejb.internal.StatefulEJBObject.postInvokeNoTx(StatefulEJBObject.jav
a:355)
atweblogic.ejb.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:865)
Using Streams to Avoid Limits on setBytes() and setString()
There is a limit on the maximum size of the array which can be
bound
using
the PreparedStatement class setBytes() method, and on the size of
the
string
which can be bound using the setString() method.
Above the limits, which depend on the version of the server you
use,
you
should use setBinaryStream() or setCharacterStream() instead.
When connecting to an Oracle8 database, the limit for setBytes()
is
2000
bytes (the maximum size of a RAW in Oracle8) and the limit forsetString()
is 4000 bytes (the maximum size of a VARCHAR2 in Oracle8).
When connecting to an Oracle7 database, the limit for setBytes()
is
255
bytes (the maximum size of a RAW in Oracle7) and the limit forsetString()
is 2000 bytes (the maximum size of a VARCHAR2 in Oracle7).
The 8.1.6 Oracle JDBC drivers may not raise an error if you exceed
the
limit
when using setBytes() or setString(), but you may receive the
following
error:
ORA-17070: Data size bigger than max size for this type
Future versions of the Oracle drivers will raise an error if thelength
exceeds these limits.
B.E.A. is now hiring! (12/14/01) If interested send a resume to [email protected]
DIRECTOR OF PRODUCT PLANS AND STRATEGY San Francisco, CA
E-SALES BUSINESS DEVELOPMENT REPRESENTATIVE Dallas, TX
SOFTWARE ENGINEER (DBA) Liberty Corner, NJ
SENIOR WEB DEVELOPER San Jose, CA
SOFTWARE ENGINEER (ALL LEVELS), CARY, NORTH CAROLINA San Jose, CA
SR. PRODUCT MANAGER Bellevue, WA
SR. WEB DESIGNER San Jose, CA
Channel Marketing Manager - EMEA Region London, GBR
DIRECTOR OF MARKETING STRATEGY, APPLICATION SERVERS San Jose, CA
SENIOR SOFTWARE ENGINEER (PLATFORM) San Jose, CA
E-COMMERCE INTEGRATION ARCHITECT San Jose, CA
QUALITY ASSURANCE ENGINEER Redmond, WA
Services Development Manager (Business Development Manager - Services) Paris, FRA; Munich, DEU
SENIOR SOFTWARE ENGINEER (PLATFORM) Redmond, WA
E-Marketing Programs Specialist EMEA London, GBR
BUSINESS DEVELOPMENT DIRECTOR - E COMMERCE INTEGRATION San Jose, CA
MANAGER, E-SALES Plano, TX -
Using Hprof with Commerce Server 3.5
My company is beginning the move to J2EE and I have been tasked with researching
profilers. I quickly came across Hprof, which is provided by the Sun JVM through
the use of the -Xrunhprof option. I have been able to successfully profile a
very small test application (stand alone app). However, I run into problems when
I use Hprof and try to start the example server provided with Commerce Server
3.5 (with WebLogic 6.0). Please see below for my syntax and results.
Syntax
%JAVA_HOME%\bin\java -Xrunhprof:cpu=times,doe=y .....
Results
The server appears to start and work correctly (no HRPOF ERROR: messages). When
I shut it down (using the console) and look at the java.hprof.txt file that is
created, the hprof data has not been fully written to the file. The file ends
in the middle of a trace:
TRACE 6687:
java/net/URLStreamHandler.getDefaultPort(URLStreamHandler.java:Unknown line)
I am curious if anyone has run into this problem before and how they might have
corrected it. Can anyone suggest a set of Hprof parameters to use? Or provide
a link to a good description of all of the parameters (I haven't found a lot of
documentation on it)?
I know that there are other commercial profilers (JProbe, Optimizeit, etc.) but
I would like to learn the basics before diving into them.
Any comments or suggestions would be appreciated.
Thanks
--ChrisHi Martin,
You probably already noticed, but a new WLCS 3.5 license has been
posted at http://commerce.bea.com/downloads/commerce_servers.jsp
Thanks for posting this. I'm sorry it didn't get answered until now.
If you ever have a question in the newsgroup that is not answered quickly
enough to get you on track with your evaluation or development process
then you can let our support team know about it by opening a support case
(for free) at http://www.bea.com/support/index.jsp
Martin Swan wrote:
When will the license on your site be updated, it ran out yesterday ?--
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com -
Weblogic Commerce Server3.5 license Error
I have installed Weblogic Commerce Server3.5 on my Server today. I got the same
error message when i try to start the server.
Aug 21, 2003 10:19:22 AM CDT> <Error> <COMMERCE_SERVER_FRAMEWORK> <W646> <Admin>
<main> <> <> <000000> <LOG_FATAL: WebLogic Personalization Server: Core Server:
3.5 license error.>
I have got a temp license. i copied and pasted in the group of the license.bea
file. Is that the way i do?
Plz let me know what is the solution for this error.
I have installed Weblogic server6.1 with SP5 along with this server
Thanks,
EshwerHello Muffy,
It looks like you do not have WLS 5.1 service pack 6 installed correctly. I
say this because I do not see the sp6 message at the top of your log and I saw
this message in your log:
org.xml.sax.SAXParseException: Element "weblogic-enterprise-bean" allows no
further input; "transaction-isolation" is not allowed
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com -
Out parameter problem with mssqlserver4v70rel510
for 5.1, you can get it off our download pages.
Joe
ker joe wrote:
Yes I am getting the same error. Can you point to the latest driver.
Joseph Weinstein <[email protected]> wrote:
Hi. I'll bet you're either running MS SQLServer 7 SP3 or SQL2000.
If I'm right, let me know, and I'll send you the latest driver,
which has new stuff to adapt to a change MS put in their DBMS for
these versions.
Joe
Greg Williams wrote:
I'm having a problem getting back out parameters from a stored procedureusing the
Weblogic jDrivers with weblogic server 5.1.
I get the exception:
java.sql.SQLException: Invalid column number (1). Use next() to fetchthe data before
calling any getXXX method.
when I attempt to call a getInt on an out parameter. Here's the code:
CallableStatement cstmtSubmit=null;
String SubmitSQL="{ call ascs_submit_schd_pmt
cstmtSubmit = con.prepareCall(SubmitSQL);
cstmtSubmit.registerOutParameter(1, java.sql.Types.INTEGER);
cstmtSubmit.setInt(2, Integer.parseInt(paymentId));
cstmtSubmit.setString(3,co_id);
cstmtSubmit.setString(4,pol_no);
cstmtSubmit.setString(5,sub_pol);
cstmtSubmit.setString(6,bus_div);
cstmtSubmit.setString(7,agent_id);
cstmtSubmit.setString(8,chg_start_dt);
cstmtSubmit.setString(9,chg_stop_dt);
cstmtSubmit.setString(10,pmt_freq);
cstmtSubmit.setString(11,max_pmts);
cstmtSubmit.setString(12,pmts_made);
cstmtSubmit.setString(13,comm_amt);
cstmtSubmit.setString(14,comm_reason);
cstmtSubmit.setString(15,rec_flag);
cstmtSubmit.setString(16,rec_rate);
cstmtSubmit.setString(17,change_by);
cstmtSubmit.setString(18,trans_dt);
cstmtSubmit.registerOutParameter(19, java.sql.Types.INTEGER);
cstmtSubmit.execute();
spReturnCode=cstmtSubmit.getInt(1);
iPaymentId = cstmtSubmit.getInt(19);
This code should work according to the JDBC 2.0 API documentation andin fact works
with no problems with a JdbcOdbcDriver.
I originally wrote the stored procedure to return an int and have thelast parameter
as an integer out parameter. Like this:
String SubmitSQL="{? = call ascs_submit_schd_pmt
This also works with the JdbcOdbcDriver but doesn't work with the Weblogictype 4
driver for mssqlserver. It gives a different sqlException:
java.sql.SQLException: Invalid column number (19). This table has 1columns (a valid
index is 1 trough 1).
This example works fine to return a integer, but as soon as you tryto access the
out parameter it throws the sqlException.
I've tried this with two versions of the mssqlserver4v70rel510 driver:
5.1.0 for SQLserver 7.0 04/03/2000 17:05:44 #66825
and
5.1.0 Service Pack 9-EARLY_RELEASE for SQLserver 7.0 01/17/2001 14:01:00#96383
- internal build by joe on client joe.nt
Any ideas? Is this a bug in the driver or are out parameters not supportedin the
type 4 jDriver?
Greg--
PS: Folks: BEA WebLogic is expanding rapidly, with both entry and advanced
positions
for people who want to work with Java, XML, SOAP and E-Commerce infrastructure
products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and San Jose
CA.
Send resumes to [email protected] -
About installing weblogic commerce server3.1
hi all:
I haved already installed weblogic5.1+sp6 on win2000 advanced server
which can communicate with oracle8i on solaris8. now, there's some error
when I install weblogic commerce server3.1 on win2000 advanced server.
step1: weblogic started.
step2: execute c:\WebLogicCommerceServer3.1\bin\win32\loadrules.bat on
win2000's command mode
there's some error message:
javax.naming.AuthenticationException [Root exception is
java.lang.SecurityExcept
ion: Authentication for user system denied in realm weblogic]You are trying to run Commerce Server 3.2 on top of WL 6 SP1
Please read the system requirements of Commerce Server. You'll notice that
you need WL5.1 SP6
Sander
"Henning Pedersen" <[email protected]> wrote in message
news:3acf1bcd$[email protected]..
>
Hi! I'm very new to Bea products, just trying out for now. I'veinstalled Weblogic
6 SP 1 under c:\bea\weblogic, and that seems to be working fine. I'm nowtrying
to install Weblogic Commerce & Personalization server, but it won'tstart - here's
the error when I try to start it:
JAVA_CLASSPATH ISC:\jdk1.3.0_02\lib\tools.jar;C:\bea\weblogic\lib\weblogic510sp
6boot.jar;C:\bea\weblogic\classes\boot
WEBLOGIC_CLASSPATH ISC:\bea\weblogic\lib\weblogic510sp6.jar;C:\bea\weblogic\lic
>
ense;C:\bea\weblogic\classes;C:\bea\weblogic\lib\weblogicaux.jar;C:\bea\webl
ogic
>
\lib\weblogic-tags-510.jar;C:\bea\commerce\license;C:\bea\commerce\classes;C
:\be
>
a\commerce\lib\rules.jar;C:\bea\commerce\lib\jrulesserviceprovider.jar;C:\be
a\co
>
mmerce\deploy\bmp\classes;C:\bea\commerce\eval\common\Taxware\classes;C:\bea
\web
>
logic\eval\cloudscape\lib\cloudscape.jar;C:\bea\weblogic\eval\cloudscape\lib
\too
ls.jar;C:\bea\weblogic\eval\cloudscape\lib\client.jar
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
C:\bea\commerce>PAUSE
Press any key to continue . . .
Have I skipped something here???
Hope someone has seen this before.
Regards,
Henning
Funcom Oslo -
Eclipse problem with Tomcat when running jsp
when I start tomcat from CMD, it starts normally and display http://localhost:8080/ properly
but when I start tomcat from Eclipse, it starts the server normally,
but it can't display http://localhost:8080/ properly,
I guess that the problem with the java classpath isn't defined correctly in Eclipse
but but I've tried it before, and it doesn't work
here the error msg from Eclipse console:
[INFO] Http11Protocol - -Initializing Coyote HTTP/1.1 on http-8080
Starting service Tomcat-Standalone
Apache Tomcat/4.1.31
[INFO] PropertyMessageResources - -Initializing, config='org.apache.struts.util.LocalStrings', returnNull=true
[INFO] PropertyMessageResources - -Initializing, config='org.apache.struts.action.ActionResources', returnNull=true
[INFO] PropertyMessageResources - -Initializing, config='org.apache.webapp.admin.ApplicationResources', returnNull=true
[INFO] Http11Protocol - -Starting Coyote HTTP/1.1 on http-8080
[INFO] ChannelSocket - -JK2: ajp13 listening on /0.0.0.0:8009
[INFO] JkMain - -Jk running ID=0 time=0/120 config=C:\jakarta-tomcat-4.1.31\conf\jk2.properties
Error compiling file: C:\jakarta-tomcat-4.1.31\work\Standalone\localhost\_\/index_jsp.java [javac] Compiling 1 source file
[javac] Modern compiler not found - looking for classic compiler
Info: Compile: javaFileName=C:\jakarta-tomcat-4.1.31\work\Standalone\localhost\_\/index_jsp.java
classpath=C:/jakarta-tomcat-4.1.31/shared/classes/;C:/jakarta-tomcat-4.1.31/common/classes/;C:/jakarta-tomcat-4.1.31/common/endorsed/xercesImpl.jar;C:/jakarta-tomcat-4.1.31/common/endorsed/xmlParserAPIs.jar;C:/jakarta-tomcat-4.1.31/common/lib/activation.jar;C:/jakarta-tomcat-4.1.31/common/lib/ant-launcher.jar;C:/jakarta-tomcat-4.1.31/common/lib/ant.jar;C:/jakarta-tomcat-4.1.31/common/lib/commons-collections.jar;C:/jakarta-tomcat-4.1.31/common/lib/commons-dbcp-1.1.jar;C:/jakarta-tomcat-4.1.31/common/lib/commons-logging-api.jar;C:/jakarta-tomcat-4.1.31/common/lib/commons-pool-1.1.jar;C:/jakarta-tomcat-4.1.31/common/lib/jasper-compiler.jar;C:/jakarta-tomcat-4.1.31/common/lib/jasper-runtime.jar;C:/jakarta-tomcat-4.1.31/common/lib/jdbc2_0-stdext.jar;C:/jakarta-tomcat-4.1.31/common/lib/jndi.jar;C:/jakarta-tomcat-4.1.31/common/lib/jta.jar;C:/jakarta-tomcat-4.1.31/common/lib/mail.jar;C:/jakarta-tomcat-4.1.31/common/lib/naming-common.jar;C:/jakarta-tomcat-4.1.31/common/lib/naming-factory.jar;C:/jakarta-tomcat-4.1.31/common/lib/naming-resources.jar;C:/jakarta-tomcat-4.1.31/common/lib/servlet.jar
cp=C:\jakarta-tomcat-4.1.31\shared\classes
cp=C:\jakarta-tomcat-4.1.31\common\classes
cp=C:\jakarta-tomcat-4.1.31\common\endorsed\xercesImpl.jar
cp=C:\jakarta-tomcat-4.1.31\common\endorsed\xmlParserAPIs.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\activation.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\ant-launcher.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\ant.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\commons-collections.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\commons-dbcp-1.1.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\commons-logging-api.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\commons-pool-1.1.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\jasper-compiler.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\jasper-runtime.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\jdbc2_0-stdext.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\jndi.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\jta.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\mail.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\naming-common.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\naming-factory.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\naming-resources.jar
cp=C:\jakarta-tomcat-4.1.31\common\lib\servlet.jar
work dir=C:\jakarta-tomcat-4.1.31\work\Standalone\localhost\_
srcDir=C:\jakarta-tomcat-4.1.31\work\Standalone\localhost\_
include=index_jsp.java
Exception compiling Cannot use classic compiler, as it is not available. A common solution is to set the environment variable JAVA_HOME to your jdk directory.
Exception:
Cannot use classic compiler, as it is not available. A common solution is to set the environment variable JAVA_HOME to your jdk directory.
at org.apache.tools.ant.taskdefs.compilers.Javac12.execute(Javac12.java:72)
at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:942)
at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764)
at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:282)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:328)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:427)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:142)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:240)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:187)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:200)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:146)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:209)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:144)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2358)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:133)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:118)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:116)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:127)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:479)
Cannot use classic compiler, as it is not available. A common solution is to set the environment variable JAVA_HOME to your jdk directory.
at org.apache.tools.ant.taskdefs.compilers.Javac12.execute(Javac12.java:72)
at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:942)
at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764)
at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:282)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:328)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:427)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:142)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:240)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:187)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:809)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:200)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:146)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:209)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:144)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2358)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:133)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:118)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:116)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:127)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:948)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:152)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:479)
Here are my system settings :
Eclipse 2.1.3
plugin : tomcatPluginV21, lomboz.213
Jakarta-tomcat-4.1.31
JAVA_HOME : C:\jdk1.3.1_15
CATALINA_HOME : C:\jakarta-tomcat-4.1.31
Here are my Eclipse settings :
http://server2.uploadit.org/files/marvelousgame-01.JPG
http://server3.uploadit.org/files/marvelousgame-02.JPG
http://server2.uploadit.org/files/marvelousgame-03.JPG
http://server3.uploadit.org/files/marvelousgame-04.JPG
http://server2.uploadit.org/files/marvelousgame-05.JPG
http://server3.uploadit.org/files/marvelousgame-06.JPG
thx!!!I would suggest updating your software to the latest versions - java 1.4.2 or higher, tomcat 5 or higher, Eclipse 3. That should fix any incompatibilities you are experiencing.
As to your problem, it seems the tomcat you are trying to run from Eclipse wants a newer Java version (1.4.2 most likely). -
Problems with synchronizations items and partners
Hi,
I have problems with synchronizations from SAP B1 to SAP E-
commerce 5.9.6
When I run Synch. manager, there are some error messages in Synchlog
and some items and business partners are synchronized and some not
synchronized.
Error messages:
1)
Completed account list synch with unhandled error:object reference not set to an instance of an object.
2)
Completed parts list synch with unhandled error:
object reference not set to an instance of an object.
at NetPoint.SynchSBO.SBOObjects.SBOItem.SBOToNetPoint()
at NetPoint.SynchSBO.SBOObjects.SBOItem.SynchItemList()
at NetPoint.SynchSBO.Synch.SynchPartList()
Thanks,
Milos VichHi Milos,
If nothing at all has synchronized, I would first double check your connection settings and passwords.
If the synch appears to to be connecting correctly, you will need to look at the data that it is failing on.
The synch queue is the prx_transaction_queue table in the Business One database. The object_type column refers to a Business One object. 2 for business partner and 4 for items. The list_of_cols_val_tab_del is the key in the associated table. For business partners that is OCRD.CardCode and items OITM.ItemCode.
First determine that there is no bad data in the queue. Bad data is typically defined as null or empty strings in the list_of_cols_val_tab_del column.
Try running the following for business partners:
select *
from prx_transaction_queue
where object_type = 2 and (list_of_cols_val_tab_del is null or list_of_cols_val_tab_del = '')
And this for Items.
select *
from prx_transaction_queue
where object_type = 4 and (list_of_cols_val_tab_del is null or list_of_cols_val_tab_del = '')
If there are nulls or empty strings in the list_of_cols_val_tab_del column, delete them.
If not, take a look at the first records in the queue.
select top 1 *
from prx_transaction_queue
where object_type = 2
order by tmstmp
and for items:
select top 1 *
from prx_transaction_queue
where object_type = 4
order by tmstmp
Change the transaction_type to "X" (remember what is was, because you will need to change it back). Changing this value will remove the item from the synch.
Rerun the synch.
If it runs at this point, there is probably data in the records that the synch was not expecting. The business partner data will need to be examined. Tics in key values (CardCode, Address Name, contact name, itemcode) may cause problems.
If this is the case, you might want to contact support to try to track the problem down.
Another source of problems may be database collation. We can talk about that if none of the above works. -
ACE : Stickyness problem with http cookies
Hi,
I am facing a serious problem with stickyness in a e-commerce configuration.
Here is the setup :
An ACE load balance user requests on two Apache servers
cookie-insert is used to stick a user on one Apache server
The home page is accessed via http on port 80
On the Home page, there is a link to allowing the user to login
The login process uses SSL
During the login, backend SSL is required between the ACE and the selected Apache server
The login is a POST request to the Apache server
After a successful login, the home page is reloaded on port 80 and the name of the user should appear on the top of the page
The ACE configuration :
Two sticky groups are configured : one for HTTP acess and another for HTTPS access
Two server farms are defined, both using the same real servers, but with different ports (80 and 441)
sticky http-cookie STICKED-TO ECOM_STICKY_TEST_HTTP
cookie insert browser-expire
timeout 240
replicate sticky
serverfarm ECOM_FARM_TEST_HTTP
sticky http-cookie STICKED-TO ECOM_STICKY_TEST_HTTPS
cookie insert browser-expire
timeout 240
replicate sticky
serverfarm ECOM_FARM_TEST_HTTPS
serverfarm host ECOM_FARM_TEST_HTTP
description *** e-Commerce Test Server Farm ***
probe ECOM_PROBE_TEST
rserver HQCHECOM01 80
inservice
rserver HQCHECOM02 80
inservice
serverfarm host ECOM_FARM_TEST_HTTPS
description *** e-Commerce Test Server Farm ***
probe ECOM_PROBE_TEST
rserver HQCHECOM01 443
inservice
rserver HQCHECOM02 443
inservice
The problem :
Let analyse the sequence of events and the value of the http cookie for each of them :
When the the home page is originally loaded, the ACE selects SERVER-1
The ACE inserts the cookie "A" in the server responses
The user is sticked to SERVER-1
Then, the user tries to login and an SSL session is established with the ACE
The user sends a POST request containing the cookie "A"
A backend SSL session is established with SERVER-1
The POST request is forwarded to SERVER-1
SERVER-1 responds with a 200 OK and the ACE generates another cookie "B" as it belongs to the sticky group ECOM_STICKY_TEST_HTTPS
The client browser reloads the page on port 80 and provides the cookie "B" (the last received) !!
The ACE sees the cookie "B" but does not find it in its database for the sticky group ECOM_STICKY_TEST_HTTP
The ACE perform another load balancing decision and selects SERVER-2 ! (instead of SERVER-1)
The page is reloaded, but the name of the user does not appear on it
The question :
As it is not possible to have only one sticky group in this configuration what would be the solution to make sure that the same server is selected for http and https ?
Thank you for any hints,
YvesHi Gilles,
I followed your recommendation to configure static cookie entries in each sticky group, but I still experience the problem of sessions getting re-load balanced to the second server when returning from HTTPS to HTTP :
It seems that the ACE ignores the static entries !
To make my question clear, I repeat hereafter the setup and the encountered problem :
Here is the setup :
An ACE load balance user requests on two Apache servers
cookie-insert is used to stick a user on one Apache server
The home page is accessed via http on port 80
On the Home page, there is a link to allowing the user to login
The login process uses SSL
During the login, backend SSL is required between the ACE and the selected Apache server
The login is a POST request to the Apache server
After a successful login, the home page is reloaded on port 80 and the name of the user should appear on the top of the page
The ACE configuration :
Two sticky groups are configured : one for HTTP acess and another for HTTPS access
Two server farms are defined, both using the same real servers, but with different ports (80 and 443)
In the ECOM_STICKY_TEST_HTTP stick group the two following cookies are automatically generated :
R105816849 for the server HQCHECOM01
R105852786 for the server HQCHECOM02
In the ECOM_STICKY_TEST_HTTPS stick group the two following cookies are automatically generated :
R355972695 for the server HQCHECOM01
R357158616 for the server HQCHECOM02
I statically configured in the each sticky group the cookies used by the other sticky group, to allow stickiness when the browser switches from HTTP to HTTPS and vice versa :
sticky http-cookie STICKED-TO ECOM_STICKY_TEST_HTTP
cookie insert browser-expire
timeout 240
replicate sticky
serverfarm ECOM_FARM_TEST_HTTP backup WEB_REDIRECT_001
56 static cookie-value "R355972695" rserver HQCHECOM01
64 static cookie-value "R357158616" rserver HQCHECOM02
sticky http-cookie STICKED-TO ECOM_STICKY_TEST_HTTPS
cookie insert browser-expire
timeout 240
replicate sticky
serverfarm ECOM_FARM_TEST_HTTPS backup WEB_REDIRECT_001
72 static cookie-value "R105816849" rserver HQCHECOM01
80 static cookie-value "R105852786" rserver HQCHECOM02
serverfarm host ECOM_FARM_TEST_HTTP
description *** e-Commerce Test Server Farm ***
probe ECOM_PROBE_TEST
rserver HQCHECOM01 80
inservice
rserver HQCHECOM02 80
inservice
serverfarm host ECOM_FARM_TEST_HTTPS
description *** e-Commerce Test Server Farm ***
probe ECOM_PROBE_TEST
rserver HQCHECOM01 443
inservice
rserver HQCHECOM02 443
inservice
The problem :
Let analyse the sequence of events and the value of the http cookie for each of them :
When the the home page is originally loaded, the ACE selects SERVER-1
The ACE inserts the cookie "A" in the server responses
The user is sticked to SERVER-1
Then, the user tries to login and an SSL session is established with the ACE
The user sends a POST request containing the cookie "A"
A backend SSL session is established with SERVER-1
The POST request is forwarded to SERVER-1
SERVER-1 responds with a 200 OK and the ACE generates another cookie "B" as it belongs to the sticky group ECOM_STICKY_TEST_HTTPS
The client browser reloads the page on port 80 and provides the cookie "B" (the last received)
The ACE sees the cookie "B" and should use the static cookie entry to select the SERVER-1
But instead, the ACE perform another load balancing decision and selects SERVER-2 !
The page is reloaded, but the name of the user does not appear on it
LiveHTTP Trace on Firefox :
GET /ecom/medias/sys_master/8800775602206/Home-page-main-banners-video.jpg HTTP/1.1
Host: ecom.test.toto.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 (CK-IBM) Firefox/3.5.8
Accept: image/png,image/*;q=0.8,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://ecom.test.toto.com/uk/en/home
Cookie: STICKED-TO=R105816849;
HTTP/1.1 200 OK
Set-Cookie: STICKED-TO=R105816849; path=/
Date: Mon, 18 Oct 2010 15:31:37 GMT
Server: Apache/2.2.13 (Red Hat)
Connection: close
Transfer-Encoding: chunked
Content-Type: image/jpeg
Here we switch on HTTPS :
https://ecom.test.toto.com/uk/en/j_spring_security_check
POST /uk/en/j_spring_security_check HTTP/1.1
Host: ecom.test.toto.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 (CK-IBM) Firefox/3.5.8
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://ecom.test.toto.com/uk/en/home
Cookie: STICKED-TO=R105816849; JSESSIONID=089DCF987DC03CAE0F516298EB886DAB.node1;
Content-Type: application/x-www-form-urlencoded
Content-Length: 75
spring-security-redirect=&j_username=yves144%40yahoo.com&j_password=junon01
Here we see cookie for the same server but for the HTTPS sticky group :
HTTP/1.1 302 Moved Temporarily
Set-Cookie: STICKED-TO=R355972695; path=/
Set-Cookie: _hybris.tenantID_=""; Expires=Thu, 01-Jan-1970 00:00:10 GMT; Path=/; HttpOnly
Date: Mon, 18 Oct 2010 15:31:39 GMT
Server: Apache/2.2.13 (Red Hat)
Location: http://ecom.test.toto.com/uk/en/home
Content-Length: 0
Connection: close
Content-Type: text/plain; charset=UTF-8
Here we switch back to HTTP :
http://ecom.test.toto.com/uk/en/home
GET /uk/en/home HTTP/1.1
Host: ecom.test.toto.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 (CK-IBM) Firefox/3.5.8
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://ecom.test.toto.com/uk/en/home
Cookie: STICKED-TO=R355972695; JSESSIONID=089DCF987DC03CAE0F516298EB886DAB.node1;
Here we see that the second server has been wrongly selected !
HTTP/1.1 200 OK
Set-Cookie: STICKED-TO=R105852786; path=/
Set-Cookie: _hybris.tenantID_=""; Expires=Thu, 01-Jan-1970 00:00:10 GMT; Path=/; HttpOnly
Set-Cookie: JSESSIONID=5A0F6EB8FBF63D5D0590FECEC62A302E.node2; Path=/; HttpOnly
Date: Mon, 18 Oct 2010 15:31:40 GMT
Server: Apache/2.2.13 (Red Hat)
Pragma: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Cache-Control: no-cache, no-store
Content-Language: en-GB
Connection: close
Transfer-Encoding: chunked
Content-Type: text/html;charset=UTF-8
http://ecom.test.toto.com/ecom/medias/sys_master/8796174057502/uk.gif
GET /ecom/medias/sys_master/8796174057502/uk.gif HTTP/1.1
Host: ecom.test.toto.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 (CK-IBM) Firefox/3.5.8
Accept: image/png,image/*;q=0.8,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://ecom.test.toto.com/uk/en/home
Cookie: STICKED-TO=R105852786; JSESSIONID=5A0F6EB8FBF63D5D0590FECEC62A302E.node2;
HTTP/1.1 200 OK
Set-Cookie: STICKED-TO=R105852786; path=/
Date: Mon, 18 Oct 2010 15:31:40 GMT
Server: Apache/2.2.13 (Red Hat)
Content-Length: 382
Connection: close
Content-Type: image/gif
Hypothesis :
It seems that the static entries are not considered by the ACE... -
I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
LeftyThis was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
boolean active = true;
public void run(){
ss.setSoTimeout(90);
while (active){
try{
serverSocket = ss.accept();
catch (SocketTimeoutException ste){
// do nothing
// interrupt thread
public void deactivate(){
active = false;
// you gotta sleep for a time longer than the
// accept() timeout to make sure that timeout is finished.
try{
sleep(91);
}catch (InterruptedException ie){
interrupt();
} -
Problem with Threads and a static variable
I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
protected static void Init(){
objMainProcess = new Thread() {
public void run() {
while( objMainProcess == Thread.currentThread() ) {
GetState();
objMainProcess.setDaemon( true );
objMainProcess.start();
public static void initStatusTimer(){
if(objTimer == null)
objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
public void actionPerformed( java.awt.event.ActionEvent evt){
SetState();
private static void SetState(){
if( objMainProcess == null ) return;
synchronized( objMainProcess ) {
bChanged = true;
try{
objMainProcess.notify();
}catch( IllegalMonitorStateException e ) {}
private static boolean GetState() {
if( objMainProcess == null ) return false;
synchronized( objMainProcess ) {
if( bChanged) {
SendMessage();
bChanged = false;
return true;
try {
objMainProcess.wait();
}catch( InterruptedException e ) {}
return false;
}Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D. -
Problem with threads running javaw
Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue; // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer) // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
// System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
}catch(Exception a){
JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run
Maybe you are looking for
-
IPOD TOUCH IS NOT RECOGNIZED IN ITUNES OR ON MY COMPUTER
I have a nano, a shuffle, and an I touch. My nano and shuffle sync fine but my I Touch is not recognized by either Itunes or my computer and the message I get says to go to my nearest Apple Store. The nearest store is 200 miles away from me. I'm pret
-
hi expects, i want to take the data from oracle system which in linux to sap r/3.please provided me some example and material.
-
How can I save a pdf with custom made joboption?
Hi, I'm new here and my english is not perfect so please, don't make me regret I joined this forum The thing is that I have to print pdfs to pdfs with certain .joboptions and I really have no idea how to that. I tried to make it by distiller, it prin
-
Phone plug doesn't go in all the way.
Phone plug stops before engaging all the way in. Was fine for 1 year and suddenly stopped working. Probed with tooth pick and seems to be free on any debris in hole.
-
Why is my purchased music gone?
Why is my purchased music gone from iTunes? When I click on purchased, it's not there. If I can't get it back I will NOT buy any more music from iTunes ever again.