Problem with comparing (excel related)

Problem: Basically all the vi does is grab values from excel and compare it with a pre-determined value and if the returned value is greater than or equal the vi stops and returns the cell which gave it thar value. I think it may that I am telling excel to compare a string value to a decimal value but I have tried that and it seems to stop instantly with a value which is cleary wrong.
I have attached the vi and sample excel file which it searchs through
Solved!
Go to Solution.
Attachments:
ReturnLeftPeak test.vi ‏35 KB
Importmacro1.xls ‏158 KB

Don't see a problem. Start at A4 and it stops on the first iteration as it should (because the cell is blank it converts to a 0 which is greater than -30). Starting at A5 it steps down to A368, again just as it should.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

Severe problem with 'Drill to Related' using drill icon

Hi
I have a severe problem with 'Drill to Related' in Discoverer Plus (10.1.2.54.25) using the drill icon of a worksheet:
1. Though existing no items to drill to are shown in the context menu (or pop-up list), instead it says just 'Drill to Related...'
2. Clicking on menue item 'Drill to Related...' results in 50% processor load (permanent) and no further update of the browser window (IE 7.0.5730.11) containig Discoverer Plus. There is no recovery of that state within about 20 minutes.
This behaviour is both highly reproducible and annoying.
When using the drill dialog instead of the icon the expected items are shown and 'Drill to Related' works fine. Although that is a workaround I don't think it acceptable to tell the end-users to use it.
I searched metalink for a hint but couldn't find anything.
Can anyone help?
Franziska

Hi S
This seems to be a bug that was fixed earlier since we didn't experience it having applied cumulative patch 3 earlier.
Something might be said about your problem in Metalink
Doc ID: Note:422575.1
Subject: Drilling With Discoverer Viewer 10g (10.1.2) Using Internet Explorer 7 (IE7) Fails With Javascript Error
We still had to apply the patch for the bug I mentioned earlier in this thread in order to be able to see and select an item to drill to. Unfortunately the problem with the processor load up to 50% and nothing happening is still there.
By the way IE 7 is certified now according to the Oracle certification information.
Hope this helps
Franziska

Problem with an excel file

Dear All,
I have a problem with an EXCEL file, i'm in a domain with windows server 2003 and all of the computer have windows 7, a user had open 3 weeks ago a fil excel after she gone on holiday so the file remain open (i don't know how) by she.
I've try with all unlocker program to make the file deletable, but not work... it is very strange because if i try to open it with the account of the user that open the file appears always the same error (open read only)...
Could you help me?
thanks

Hi,
You may end the Excel process first, the “PsTools” have a pskill command that you can use to end a process remotely.
Here’s a simple command:
pskill \\computer –u username -p password excel.exe
For more information, please see the KB below:
http://technet.microsoft.com/en-us/sysinternals/bb896649.aspx
Best Regards

Problem with include and relative path in jsp

Precompile jsp with wlappc in 9.2, I got the error "The include file was not found" when the jsp use <%@ include file="../includes/dataEntry/code_error.html" %>
          This code used to work with 8.1. I notice that someone has report the same problem with 9.0 and you have patch for it. Is it fix in 9.2 or do I require a patch as well?
          Thanks,
          Khuemy

When you precompile, can you say "Keepgenerated=TRUE". It might help you track
          down the difference with the URL. You should only get a 404 error when the
          resource is not found at runtime, which is independant of when you compile. The
          difference should be in how the URL is compiled.
          Chris
          ali wrote:
          > I am using WLS 6.0 SP1, when I use relative path in <jsp:forward> in my JSPs
          > it forwards ok if I am using directly JSPs but if I am using pre-compiled
          > JSPs (and have proper servlet-mappings
          > in my web.xml), I get 404 error with the relative-path, if I change it to
          > absolute path with pre-compiled JSPs it forwards ok , then.
          > any ideas why this is so?
          > thanks,

Problem with jsessionid and relative paths

I'm having an issue with jsessionid in a J2EE application running on an all Oracle platform (Oracle DB, 9ias, etc.). Most of the time sessions are tracked with cookies, but occasionally the jsessionid appears on the URL (on first login with a new browser window I think?).
Anyway, sometimes the session id is very large (100 chars +) and includes special characters, specifically a backslash. This is causing problems with relative paths in the page.
Is this normal behavior or is there a problem with my app server/JVM setup? Has anyone else seen this? Thanks for any advice.

Hi Stefan,
          The issue was logged as CR238704. You can either contact [email protected] or
          just pass me your email Id and I'll send the patch to you.
          -- Nagesh
          <Stefan Krause> wrote in message news:[email protected]..
          > The problem I have is that the application is very old and at the same
          > time very big (so we're doing the transition step by step) and there are
          > lots of variables (and even methods in JSP pages - no comment) shared
          > between the JSP pages!
          > So for us jsp:include isn't an option...
          >
          > Is there a way to report bugs when you've got only the free development
          > license?

Problem with Protected Excel sheets through OLE

Hi Friends
We are facing the problem with the protected sheets in excel, when we are accessing worksheets via SAP.
We can insert the values in the protected sheet and we can do other manupalations, but when we are trying to do the autofit for the protected sheet via SAP, then its throwing an error while making it as Visible in SAP ECC 6.0.
Though it is valid, because even when we do in the excel itself, it wont allow the user to shrink the columns, but this one is possible in ECC 5.0 and we can make excel is visible on the screen.
I would like to know is this SAP Version problem or anything else apart from this? and I would like to know is there anyway to unprotect and protect the sheet through ABAP program with out a password. Now my clients wants the autofit though its protected.
Please give me any suggestions.
Thanks
Praveen

its bug with ECC 5.0. If we want to make it auto fit we need to unprotect, then auto fit.
Later we can protect again

Winshuttle problem with new excel sheet

Hi ,
I am getting Winshuttle problem after the excel upgraded to latest version.
when i open the winshuttle from icon, i dont get any prompt/no information.
Any ideas fromo experts ?
Siva

We solved the problem by going into the performance settings and disabling the "fade" functionality in Windows. To get to the screen to make the changes in Windows, open the Control Panel and navigate to "System". Open "System" and click on the "Advanced Settings" tab. Next, click on the button marked "Settings" in the "Performance" area. In the "Visual Affects" tab, clear the checkbox for three "Fade... " options.
I tested this successfully, even for users who have no administrative rights on their computer.
Please try this solution and see what results you receive. The strange thing in our situation is that the OS image used for laptops does not suffer the problem with Bex and WinShuttle as does the OS image used for desktop computers.
BG, are you from the UK? I ask as I watch a few UK television programs, and I notice they use "sorted" in the same manner us Americans use "taken care of" or as us Southerners say "figured out".
Cheers,
Kurt

HT201250 Problem with recent Excel 2011 update

I installed an update to Mac Excel 2011 yesterday. It complete sucessfully but the VBA component is now missing. All Exel files with VBA code now cannot be opened. The following message is shown for each:
Excel could not open xxxx.xlsm because some content is unreadable. Do you want to open and repair this workbook?
I attempted to use the Time Machine to restore the Excel applicatiion but it will not run because it says Excel is open when it is not.
Has anyone had a similar problem with the latest update to Excel?

I bought a refurb ipad 32gb. I have noticed when itunes via wifi fails to do an app update, it screws the whole ios; thereby forcing ipad to go into recovery mode. I thought Apple learned the hard way not to allow one app to bring down the whole os!! This is the 5th time an app caused this. last time Apple forced me to reinstall Itunes, wasted 2 hrs.
I worked hard saving up enough funds to get an iPad. Yes, i even paid Applecare too. If this can be fixed, I want a replacement or a full refund.

Admiright Problem with Tdms Excel Automation

Hi
i have a problem with the TDMS Excel Plugin. I normally have now Administrator Rights on my Computer. So i got the Administator Rights to install the TDMS Excel Plugin. After i had the rights, i installed the Plugin and everything works fine. Then i wrote a VBA script with automatically imports TDMS Files and Copy &Paste Values in a new Excel sheet. Thes macro also works fine. After a while i lost my Admin Rights and i am a "Normal" user again. But with no more Admin-rights my macro doesn't work any longer. There is a error messange which tells me that " ...only a Administator can connect or disconnect the Plugin..."
The normal manual import with the Plugin still works.
Can anybody help me with this probblem?
Thanks

Bump...
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Problems with ALV - Excel after changing from 640 to 710

Hi all,
first i have to say, that i have tried to set this thread in the SAPGUI-Forum,
but i didn't get any answers, therefore i try it here.
I have changed our SAPGUI from 640 to 710. Now i get problems
with ALV-GRID display.
When i change the output to EXCEL-Inplace i get the Error-Message:
0K000
View cannot be switched: Product is not installed or integration is not active.
In 640 i don't have any problems. We have ECC6.
When i use GUI710 and SAP 4.6C i don't have any problems.
Simple Test is possible with SE16N and change ALV output to excel-inplace.
Can anybody help?
Thanks.
Regards, Dieter

Hi Dieter,
we had a similar problem who we resolved installing path the GUI710_1-10002995.EXE.
Have you tried to install the patch?
Bye
Giovanni Mortati

Problems with ALV - Excel after changin from 640 to 710

Hi all,
i have changed our SAPGUI from 640 to 710. Now i get problems
with ALV-GRID display.
When i change to EXCEL-Inplace i get the Error-Message:
0K000
View cannot be switched: Product is not installed or integration is not active.
in 640 i don't have any problems.
Can anybody help?
Thanks.
Regards, Dieter

Hi Roman,
in Service.sap.com there is the first patch-level of the new GUI7.10.
i have install it without any problems.
The problem i had with excal-inplace is solved.
Regards, Dieter

Serious Problems with anything IPOD related

I've recently had trouble with my IPOD. I connect it to the computer and see the charging splash screen for a few seconds and then it stops. My computer doesent detect it at all (like it used to) and my IPOD wont even turn on. I read some troubleshooting on here and went ahead and uninstalled everything. I uninstalled quicktime, IPOD, IPOD updater, and ITUNES. I then downloaded both ITUNES and IPOD updated and in each instance I get this very very weird command line parameter:
Command line parameters:
/L language ID
/S Hide intialization dialog. For silent mode use: /S /v/qn.
/V parameters to MsiExec.exe
/UA<url to InstMsiA.exe>
/UW<url to InstMsiW.exe>
/UM<url to msi package>
After I receive that message I click "Ok" and absolutely nothing happens. It never did this before, I never had problems with my ipod or itunes before, nothing. I have no idea what the catalyst for all of this is. Any help is greatly appreciated.

BUMP!!
Now when I plug my IPOD in it actually has a splash screen. It shows a folder icon with an exclamation point. I imagine it shows that because I uninstalled ALL IPOD related software. The problem is, I STILL cant install any IPOD material, I get the same error code I posted earlier over and over again.

Having sync problem with MS365 Excel

I have MS Excel on my Mac.
I bought the MS 365 which includes Excel.
However, I am having difficulty syncing Mac Excel with my iPad MS365 Excel.
I have set up the iCloud on both, though on the Mac its still named Skydrive.
I have no problem with OneNote which syncs without a hitch.
But on Excel, what work done on Mac does not immediately sync with the iPad.
They seem to be several days behind.
Any soution anyone?
Richyi

Richyi wrote:
I have MS Excel on my Mac.
Then post your question on Microsoft's own forums for their Mac software since it's their software you're having problems with
http://answers.microsoft.com/en-us/mac

Problem with sendRedirect using relative URL in WebLogic 5.1 with SP7 & 8

I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?


I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?

Problem with an Excel Attachment - Mail adapter

Hello.
I have a problem when I want to attach an excel file. I have configured the communication channel for sending mails with mail package.
I have done the configuration in order to get an excel file. If I test the scenario with Content_Type "text/html" I recieve correctly the information in the mail body.
When I test the scenario with Content_Type "application/vnd.ms-excel", html tags (like: <br>, , &) are not converted. The file is attached as xls, but not converted correctly.
For example, with Content_Type "text/html":
Orders:
1 00023 ER123
2 89798 EHJ21
With Content_Type "application/vnd.ms-excel":
Orders:<br>1&nbsp;&nbsp;&nbsp;00023&nbsp;&nbsp; ER123"<br&gt2&nbsp;&nbsp;&nbsp;89798&nbsp;&nbsp;&nbsp;EHJ21
I have tested with Content_Type for Word files and I have the same error too.
Do I have to set some special charset in the Content_Type?
Is this an Excel error?
Thanks in advance.
Edited by: Alejandro Maldonado Quezada on Apr 6, 2009 6:28 PM

Hi,
I had a scenario like SAP R3 - XI - Mail receiver.
I have generated the Excel file attachment with the following details.
Content-Type:- application/vnd.ms-excel;name="Filename.CSV".
Content: - Field1,Field2,Field3,NewLineCharacter,Field4,Field5,Field6.
Content-disposition = attachment
In R3 NewLineCharacter = CL_ABAP_CHAR_UTILITIES=>NEWLINE.
Select KEEP ATTACHMENT option in Mail receive adaptet config.
Excel file Filename.CSV was generated as attachment as follow.
Field1 Field2 Field3
Field4 Field5 Field6
Regards,
Jagesh

Problem with comparing (excel related)

Similar Messages

Maybe you are looking for