Problem with Contents Side View

Hey everyone,
I have a really fustrating issue at the moment.
I created a folio with multiple articles and then went on to edit and update some of the articles. I've gone into Folio Producer and changed metadata etc. Everything seems fine with all the correct photos/articles showing for each article.
HOWEVER
When I preview the folio in content viwer, the side oragnizer/viewr etc (the side, verticle contents) shows the older pictures and articles. The horizontal, drop down contents on the other hand displays all the proper photos/articles.
Does anyone know how to fix this or what may cause this problem?

Archive the folio from the content viewer then redownload it.

Similar Messages

Problem with Local DCs View in NWDS 7.0

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Hi,
This is due to some files missed in Local development.
Let me know Are you able to see <b>.confdef, .syncdb</b> and <b>buildvariant.config </b> files under Local Developement.
If you are not able to see, UnInstall your NWDS, Remove Local developement under .dtc folder, then Re-Install NWDS.
Hope this will help you.
Thanks & Regards
Vasundhara

Problem with Local DCs View in NWDS

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Your setup might be incomplete: The SAR file extraction creates very long paths on your filesystem. If you do not extract to the rootfolder of disk, chances are the paths become too long and the installation exits, without any warning.
If this is not the cause of your problem, check if the .dcdef files for the local DCs (plugin com.sap.tc.ap if I'm correct) were copied during installation.

Problem with content: 7 - Bad sound Data

When I do the following...
Voice = new Sound();
Voice.loadSound("test.mp3", true)
I get the error...
Problem with content: 7 - Bad sound Data
AND
Problem with content: 7 - The sound data format is not
recognized.
I am using the test.mp3 files that comes with Flash8.
Thanks!
Bob

OK. This combo works!
version flash Player 8
action script 2.0
Audio Stream: MP3, 128 kbps, Stereo best
Audio event: MP3, 128 kbps, Stereo best
Override sound settings (unchecked)
But this combo does not!!
version flash lite 2.0
action script 2.0
Audio Stream: MP3, 128 kbps, Stereo best
Audio event: MP3, 128 kbps, Stereo best
Override sound settings (unchecked)
Still get the error on all Nokias except Nokia 90 which gets
no error but just does not play the file

Problem with pdf chrome viewer and javascript

I have a problem with chrome pdf viewer. We have created a form with acrobat 9 pro, this form contains a javascript. When the form is printed or saved the javascript checks that all the mandatiry fields are completed and displays a message if some fields are uncompleted. The chrome pdf viewer doesn't display the warning message when the form is saved, and doesn't display the check box included in the warning message pop up to confirm that the user accepts to print the form. The control is correct with FF et IE
Thanks for your help

There are many PDF viewers. Adobe's, third party downloads, things that come with systems (Apple Preview, Microsoft 8 Reader), things built into browsers (Chrome, Firefox...) Adobe's software understands the full set of JavaScript. Some ignoresJavaScript altogether. Some do selected JavaScript. This is a bit of a mess, but nothing can be done about it EXCEPT that you can demand your users use Adobe Reader. Whether they actually will depends on how important your needs are to them.

Problem with Content Barrier

I just wanted to post my experience with IChat AV and problems with Content Barrier.
After a long time with Support, I deleted Content Barrier from the startup folder and everything works fine now.
I will give an update when I get IChat AV to work with Content Barrier installed.

Patrick - I experienced the same problem with Content Barrier and Net Barrier too. But, I did an archive and install of Tiger (actually a reinstall) after my son's iMac was only 3 days old. Was not aware that CB was the cause of iChat not working until I tried to reinstall CB and found that to be the culprit.
Do you also have Netbarrier? I found that was a problem too.
I e-mailed Intego and all they could offer was did I upgrade to 10.1.7 and updated filters. I did the program update, but since I did not renew the subscription, I do not have the latest filters (last filter update was Feb 05).
I have another e-mail to Intego saying this, but no response from them (but it was only last Friday).
Any thoughts on an alternative content barrier program?
Joe

Problem with the crystal viewer

Hi there,
I have a problem with thw crystal viewer. I have reports developped in Crystal XI that run in vb.net within the "CrystalDecision.Windows.Forms.CrystalReportViewer" object. On all computer client everything works fin except on one of them. When the print button is pressed, it gave a "Object reference not set to an instance of an object" error. Since this error is raised by the "Crystal report windows form viewer" preview window i have no idea why this occured. We tried to uninstall the viewer and reinstall it without chance.
The only thing i can tell is that this client use a "HP deskjet 3420 series" printer. that's the only difference there is on this computer. Anyone as an idea?
Thanks
Ben

Hi Ben,
Try moving that printer to another PC and install the print driver. If it fails there it's likely a driver issue. HP and Cr has a history of problems. Mostly it's HP drivers returning the wrong memory structure size.
If you can find someone who is using Windows XP and Windows 2003 and see if either work. Or possibly plug the printer ina print server and see if that works.
Next option is if you wrote the software you are running run it in debug mode and see if it captures anything when printing. If did not write it then ask the person who did to test it also.
Next option if you want to dig deeper into the cause is go to Windows site and download a program called DebugDiag. Run this program and set it to capture crashes. It will generate a dump file which can be analyzed. It should tell you which API or function caused the crash.
Thank you
Don

Keynote conversion: Powerpoint found a problem with content....

Hi all,
MS office is killing me and I'd appreciate any pointers and comments
Here's the situation:
1. Keynote file (multi-revised over the years) exported to powerpoint file XYZ in New-MBP
2. New-MBP opens XYZ and gets "found a problem with content in..."
3. Click on "repair", open up XYZ, and get bunch of blank pages
4. Same XYZ file copied to Old-MBP(freshly installed, now my home media server, not many apps installed).
5. Same version of Office 2011 installed in Old-MBP, opened the file just fine!
(so the problem is not NewMBP Keynote)
6. Created a test account in New-MBP
7. Attempted to open XYZ with Powerpoint
8. Same "found a problem with content in..."
9. Click on "repair", open up XYZ, and get bunch of blank pages
(so the problem is not user/privileges, but the NewMBP system-wide issue?)
10. In New MBP, created a brand new Keynote file, did some light work
11. Exported new keynote file to powerpoint file RRR
12. In New-MBP, RRR opened under Powerpoint 2011 just fine!
(so the problem might be the original multi-modified Keynote file?)
(But its powerpoint file XYZ opened in Old-MBP just fine!)
I've uninstalled and reinstalled Office 2011, with SP1, still cannot open XYZ properly.
I've copied all Office 2011 files from Old-MBP to New MBP, still cannot open XYZ properly.
I"ve googled the problem and tried anything I could find, still cannot open XYZ properly. (deleting presenter notes... etc)
My current conclusion: some kind of software system conflicts in the New-MBP.
Anyone with any ideas?
Thanks a lot in advance.
Will

Hi Will,
Met the same issues and spent hours to find the problem. And guess what ? I found it :-)
For some reason, groups are not supported by Powerpoint converted files.
This is why every slide that contains group is not converted.
The workaround is to ungroup all the groups in your keynote file (alt+cmd+shift+G) and you'll see your slides being converted again.
I'm not sure where the issue is coming from. I would tend to think it should be resolve by the Apple Keynote team.
Not sure whether it has been escalated so far.
There might be some other small issues. One or two slides were not properly converted although they were not containing group, but this should fix most of them.
Have fun degrouping your slides

Problems with Standard Apps views (eBusiness Suite)

Hi all,
I am working with Oracle Application Express and Oracle eBusiness Suite 11.5.10. We have integrated OAE with EBS, but now we are having problems with the standard views (owner APPS).
I would need the help from somebody that works with OAE and EBS.
Once we want to query one of the standard views, like ap_invoices, it is necessary to initialize the session with a script like this:
begin
DBMS_APPLICATION_INFO.SET_CLIENT_INFO(219);
end;
This script lets us to access to the data from the table AP_INVOICES_ALL using the view AP_INVOICES.
Once I have run the script from SQL Commands (SQL Workshop), I try to run a query using the standard view, for example:
SELECT * FROM apps.ap_invoices
From a Report or from SQL Commands (SQL Workshop) always I get the next error:
"ORA-01722: invalid number."
However, if I run this query from SQL Plus (same db user), there is any problem, the query works and retrieves rows.
If I get the source code of the view, remove all the columns, keeping the next SQL:
SELECT 1
FROM ap.AP_INVOICES_ALL
WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)
Run this SQL in OAE and I obtain the error again, however from SQL Plus the query works correctly.
I suppose somebody that works this EBS and OAE has had this problem. How did you solve it?
Thanks in advance.
Regards, Luis
PD. I have tried to not used the views and use the tables filtering the ORG_ID and looks it can work, but I do not like this option.

Luis - I don't know where you are running these blocks - the SQL Command Processor in APEX? Anyway, for every APEX page request the engine executes something like the following, depending on your version:    begin
    dbms_application_info.set_client_info(g_user);
    dbms_session.set_identifier(substr(g_user,1,(64 - length(g_instance)-1))||':'||to_char(g_instance));
    dbms_application_info.set_module('APEX:APPLICATION '||to_char(g_flow_id),'PAGE '||to_char(g_flow_step_id));
    exception when others then null;
    end;In the above code, the value of g_user is the logged-in username, perhaps ADMIN in your case.
Keep in mind that when you do a set_client_info in the database session, that persists only for the duration of the session. On the next page request, you'll get a new database session (or a recycled one).
Scott

WHEN or HOW to fix the problem with Thunderbolt/Side screen problems

WHEN or HOW to fix the problem with Thunderbolt/Side screen problems (Cinema screen). Keeps blinking on & off then eventually completely off. Would have thought Apple would have fixed the problem by now as it is apparently to do with the Thunderbolt connector!.

Hello, might it be Video card related?
See if yours is on the recall list...
iMac (27in): AMD Radeon 6970M Video Card Replacement Program (del 'mid 2011')
http://xlr8yourmac.com/
http://support.apple.com/kb/TS5167?

Problem with Content Server 4 keystore access on Ubuntu 8.04

Hello,
Setting up the Content Server I encounter this problem with the fulfillment server Status check-up:
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.Error: Problem reading key and certificate from keystore
     com.adobe.adept.fulfillment.security.ServerConfig.init(ServerConfig.java:201)
     com.adobe.adept.fulfillment.security.ServerConfig.getSigningURL(ServerConfig.java:48)
     com.adobe.adept.fulfillment.servlet.FulfillmentServerStatus.getServers(FulfillmentServerStatus.java:34)
     com.adobe.adept.common.servlet.Status.checkUp(Status.java:355)
     com.adobe.adept.common.servlet.Status.doGet(Status.java:421)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
I've created operator.p12 according to the instructions in the Quickstart guide
and placed it in /etc where it is accessible by the server. I used OpenSSL 0.9.8k
for this.
I can use "openssl pkcs12 -in operator.p12 -out file.pem" to view the contents of
the file.
My Content Server fulfillment configuration is as follows:
com.adobe.adept.init1=com.adobe.adept.shared.util.SharedInitialization
com.adobe.adept.log.level=trace
com.adobe.adept.log.file=/var/log/fulfillment.log
com.adobe.adept.persist.sql.driverClass=com.mysql.jdbc.Driver
com.adobe.adept.persist.sql.connection=jdbc:mysql://127.0.0.1:3306/adept
com.adobe.adept.persist.sql.dialect=mysql
com.adobe.adept.persist.sql.user=ereading
com.adobe.adept.persist.sql.password=********
com.adobe.adept.fulfillment.security.licensesignURL=https://eusigningservice.adobe.com/licensesign
com.adobe.adept.fulfillment.security.keystore.user=operator
com.adobe.adept.fulfillment.security.keystore.password=********
com.adobe.adept.fulfillment.security.pkcs12.file=file:///etc/operator.p12
com.adobe.adept.serviceURL=http://******.dmz.******.org/fulfillment
Any ideas?
Best regards,
Teemu

for solve this, change this
com.adobe.adept.fulfillment.security.pkcs12.file=file:///etc/operator.p12
for this
com.adobe.adept.fulfillment.security.pkcs12.file=/etc/operator.p12

Problem with the table view's _visibleBounds when used on a scroll view

I've had numerous problems with getting a table view to work on a scroll view since the table view keeps resizing (http://discussions.apple.com/thread.jspa?threadID=2618816&tstart=0)
I have created the views in IB. The scroll view is attached to the controller's view, and is assigned as the controller's view. The frame size of the scroll view is 320x436. I am manually setting the content size in code:
UIScrollView* tempScrollView = (UIScrollView*) self.view;
tempScrollView.contentSize = CGSizeMake(320, 720);
The table view's frame's width/height is set to 280x88 in IB (i.e the size of two cells), and the header and footer are set to size 0.
However, when I run the code, the table view is smaller, it is only 280x68. I have looked in the debugger, and the table view's _contentSize (of its scroll view) is 280x88; however, the _visibleBounds property is 280x68.
I've tried looking into the documentation for the UITableView class, but can't find anything on the _visibleBounds property, or where it is being set and how to force it to the correct size.
If anybody has any advice, I'd appreciate it.

I can get around this problem by going to the scrollview which the tableview belongs to, and unchecking the Autoresize Subviews box.
But if anybody knows about the _visibleBounds property, or the rules which are applied when resizing subviews, I'd be interested.

Problems with the "Pre-view" button in an OO ALV!

Hey all,
I have a problem with my OO ALV...when I press the "Pre-View" function button from my ALV I get a dump.
It says "Fieldsymbol not yet assigned".
I check my Fieldcatalog, my out_itab of the ALV....I do not know where is the problem.
When I use the debugger I get the place where the dump occures, but I do not know why it occurs....
When the ALV tries to convert the content of my ALV the dump occurs. The Fieldcatalog does not seemes to be the problem, because SAP convert the catalog correctly, but when he tries to convert the rows of my ALV he crashes...but only after the second row. The first row of the content he convert, but when he tries to convert the second row....bumm!!!
Does somebody has an idea? Or does somebody knows of a generelly problem with OO ALV's which could be the reason for my problem?
I apreciate any help.
Thanks a lot.
Marcelo

please reward points if your problem solves.
and try to close the thread.
thansk and regards
vijay
Message was edited by: Vijay Babu Dudla

Having problems with content.bin on n8

Hi,
I'm holding on to n8 mobile. I'm having some problems with the web. Whenever I start surfing the web, there's still pop up saying view interrupted download. I click view and content.bin pop up was shown. What content.bin actually is? Can anyone help me? Thanks.(:

I can't delete it. It only has hide. But is it that I deleted the wrong content previously?

Problem with disabled code view

Hi,
I've a problem with a template-based website which works fine
in design view but will not allow edits in code view (with the
exception of the contents of the <title> element). The
template has multiple editable regions and has been deployed on
quite a few occasions to multiple authors with varying
configurations without any trouble before, but now it is causing
quite a bit of head-scratching!
The problem originally manifested in Dreamweaver MX 2004 on
Windows 2000. An upgrade to Dreamweaver 8 has taken place and the
issue persists. Testing on a similar computer using a standard
shared drive in Windows shows the same problem in Dreamweaver 8 but
was fine in Dreamweaver MX. Working with a copied set of files on a
remote computer (Win2k and DW MX 2004) seems to somehow resolve /
circumvent the problem and the code view works fine. Unfortunately
this isn't an option for the main authors of the site who have only
their current machines available.
The fifth post down in a
thread
over at DMXzone seems to refer to a similar problem, but the
workaround highlighted there has not worked for me.
I'm not really a heavy Dreamweaver user but I can normally
figure things out. This one however has got me stumped - anybody
got any ideas? (Apologies if it's a really simple setting or flag
that I should know about, but I've not been able to find anything!)
Cheers,
Dan

Ca you post a link to the page, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"yorkdan" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> I've a problem with a template-based website which works
fine in design
> view
> but will not allow edits in code view (with the
exception of the contents
> of
> the <title> element). The template has multiple
editable regions and has
> been
> deployed on quite a few occasions to multiple authors
with varying
> configurations without any trouble before, but now it is
causing quite a
> bit of
> head-scratching!
>
> The problem originally manifested in Dreamweaver MX 2004
on Windows 2000.
> An
> upgrade to Dreamweaver 8 has taken place and the issue
persists. Testing
> on a
> similar computer using a standard shared drive in
Windows shows the same
> problem in Dreamweaver 8 but was fine in Dreamweaver MX.
Working with a
> copied
> set of files on a remote computer (Win2k and DW MX 2004)
seems to somehow
> resolve / circumvent the problem and the code view works
fine.
> Unfortunately
> this isn't an option for the main authors of the site
who have only their
> current machines available.
>
> The fifth post down in a
>
http://www.dmxzone.com/forum/topic.asp?topic_id=33748
> seems to refer to a similar problem, but the workaround
highlighted there
> has
> not worked for me.
>
> I'm not really a heavy Dreamweaver user but I can
normally figure things
> out.
> This one however has got me stumped - anybody got any
ideas? (Apologies if
> it's
> a really simple setting or flag that I should know
about, but I've not
> been
> able to find anything!)
>
> Cheers,
> Dan
>
>
>

Problem with Contents Side View

Similar Messages

Maybe you are looking for